User guide
TEL E C O M
FOR SAMSUNG TECHNICAL TIPS PLEASE VISIT WWW.PRPTELECOM.CO.UK
E is used to hide digits. You may want to hide some phone numbers so that they will not show in the
display when you dial the speed dial number later. When you are programming the phone number,
press E before entering the digits you
For example, if you program a speed dial number with the phone number 9-[0121]728765, when you
later dial this speed dial number the display shows ****728765.
Note: When programming an outside number, enter the access code (e.g. 9 or 0) before you press E to
hide any digits.
F is used to enter a name for the speed dial number. See Personal Speed Dial Names under Display
Features.
Use the HOLD key to clear a speed dial number and/or name.
One-Touch Speed Dialling
You can assign any personal or system speed dial number to an already
programmed speed dial key for quick and easy one-touch dialling
of frequently-used numbers.
1. While on-hook, press the TRSF key and dial 107.
2. Press an SPD key.
3. Dial the speed dial number that you want assigned to this key.
4. Press the TRSF key to store your selection.
To call this number, simply press the SPD key.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER key before you begin dialling.
Last Number Redial
To redial the last outside number you dialled:
key and the LNR soft key.
OR
Dial 19.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the
SPEAKER before you begin dialling. Redial does not apply to internal calls.
Save Number With Redial
To save the number you just dialled for later use, before hanging up:
AVE soft key.