SAMSUNG DCS KEYSET USER GUIDE
Publication Information Samsung Telecoms reserves the right without prior notice to revise information in this publication for any reason. Samsung Telecoms also reserves the right without prior notice to make changes in design or components of equipment as engineering and manufacturing may warrant. Disclaimer Samsung Telecoms is not responsible for errors or problems arising from customers not installing, programming or operating their Samsung systems as described in this manual.
EU Declaration of Conformity (RTTE) Samsung Electronics Co., Ltd. 259 Gongdan-Dong, Gumi-City Kyungbuk, Korea, 730-030 (factory name, address) declare under our sole responsibility that the product Digital Keyphone System "DCS" to which this declaration relates is in conformity with RTTE Directive 1999/5/EC ( Annex II ) Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC:92/31/EEC By application of the following standards EN55022 : 1998 Inc A1: 2000* ................................................
EU Declaration of Conformity (see previous page) For other directives relevant to DCS Compact II, DCS-816, DCS-408, DCS-408i and DCS-VIP systems, refer to the Samsung website at: www.samsung-telecoms.co.uk Intended Use This digital telephone is intended to be connected to a digital extension of a Samsung DCS telephone system (DCS, DCS Compact II, DCS-816, DCS-408, DCS-408i or DCS-VIP). The connection allows voice communication between the central processor unit and the telephone.
Note for Users Outside the UK In order to provide as much information as possible on the features and functions of Samsung Digital Keysets, it has been necessary to include some details which are relevant to users in the UK only. Please be aware, therefore, that you may notice some differences in the operation or performance of your keyset if you are located in another country. However, the general operating procedures provided here remain relevant for your keyset.
Contents Things You Should Know ................................................. 1 Your DCS Keyphone System........................................................... 1 Your DCS Keyset ............................................................................. 1 Call Indications................................................................................. 2 Speakerphone.................................................................................... 3 Volume Controls................................
Samsung DCS Keyset User Guide Call Processing ................................................................. 18 System Hold .................................................................................... 18 Exclusive Hold ................................................................................ 18 Hold Recall...................................................................................... 18 Consultation Hold ..........................................................................
Paging and Messaging ..................................................... 34 Making An Internal Page .............................................................. 34 Making An External Page ............................................................. 34 All Page ........................................................................................... 35 Meet Me Page / Meet Me Answer................................................. 35 Call Park and Page...................................................
Samsung DCS Keyset User Guide Display Features............................................................... 51 Call Progress Displays.................................................................... 51 Directory Information..................................................................................... 51 Setting Extension Names................................................................ 51 Personal Speed Dial Names ...........................................................
Things You Should Know Your DCS Keyphone System There are a number of different Samsung keyphone systems each designated with the prefix ‘DCS.’ The original system is called simply the ‘DCS.’ Other systems are designated DCS Compact II, DCS816, DCS-408 and DCS-408i. For simplicity, this guide uses the designations ‘DCS,’ ‘Compact II,’ ‘816,’ ‘408’ and ‘408i’ when referring to individual systems.
Samsung DCS Keyset User Guide Lines from the telephone company are “C.O. lines.” Calls on these lines are referred to as “outside calls.” Your system can have individual C.O. line keys—called Direct Trunk Selection (DTS) keys—or lines may be assigned to groups. When they are in a group, you access a line by dialling an access code or pressing a route key. For example, you might dial ‘9’ or ‘0’ or press the LOCAL key to get a local outside line.
Internal calls, also called intercom calls, always appear on your CALL keys and always light green. You can have up to eight CALL keys (or up to five on Compact II systems), but two are recommended. Outside calls appear on individual DTS keys, if these are assigned. If an individual line is not assigned to its own key, it will appear on a CALL key. Your outside calls will light green on your keyset and red on other keysets. You never lose sight of your calls while they are on hold.
Samsung DCS Keyset User Guide through the speaker can be adjusted during a page announcement using the VOLUME keys. (There are eight user-programmable levels for ring, off-hook ring and handset volume, and 16 levels for speaker and background music volume.) Note: Volume levels can also be changed by dialling TRSF 114 and selecting the required option(s).
Error Tone—a continuous single-level tone indicates you have done something incorrectly and should try again. Note: Check with your system administrator for the correct tones on your keyset if you are outside of the UK. Selecting Key Features Using Menus In order to use any features that are not assigned to programmable keys, you can press the SCROLL key to display feature menus on the LCD and then use the soft keys to select the required feature(s).
Samsung DCS Keyset User Guide 1. Select one of the main menus, CALL, OTHER, or ANS using the appropriate soft key. 2. You select features in a menu using the soft keys. If there are more than three features in a menu—as indicated by the symbol ➔ displayed as the last character on the lower line of the display—press the SCROLL key to display these further options. Be aware that the menus presented to you will change depending on the state of your keyphone. In idle state, you see the menus above.
LCD 24B Keyset Layout Labelling Programmable Keys Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover. 32-CHARACTER DISPLAY Two lines with 16 characters each. SOFT KEYS Used to activate features via the display. SCROLL KEY Used to scroll through displays.
Samsung DCS Keyset User Guide LCD 12B Keyset Layout Labelling Programmable Keys Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover. 32-CHARACTER DISPLAY Two lines with 16 characters each. SOFT KEYS Used to activate features via the display. SCROLL KEY Used to scroll through displays.
LCD 6B Keyset Layout Labelling Programmable Keys Insert the end of a paper clip into the notch of the clear cover. Push the cover sideways. Lift the cover and remove the designation strip. Label the designation strip. Replace the strip and cover.
Samsung DCS Keyset User Guide Add-On Module (AOM) Layout PROGRAMMABLE KEY RED LED INDICATOR Note: The AOM cannot be used with a 408 or 408i system.
Outside Calls Making An Outside Call 1. Lift the handset and press an idle outside line key, line group key or dial a line access code to receive dial tone. OR To use the speakerphone, press an idle outside line key or line group key, or dial a line access code, to receive dial tone through the speaker. OR Press the SPEAKER key, receive internal dial tone and dial a line access code. 2. Dial the telephone number. 3. Finish the call by replacing the handset or pressing the ANS/RLS key.
Samsung DCS Keyset User Guide Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before dialling. Answering An Outside Call • Lift the handset and you are automatically connected to the ringing call. (See Ring Preference under Customising Your Keyset.) OR Press the ANS/RLS key to automatically answer on the speakerphone. Note: If a call is flashing at your keyset but not ringing, you must press the flashing key to answer.
Busy Line Queuing With Callback If you receive a busy signal when you are selecting an outside line, this means that the line or group of lines is busy. 1. Press the tone. CALLBACK key or dial 44. You will hear confirmation When the line becomes free the system will call you back. 2. Lift the handset or press the ANS/RLS key to answer, wait for dial tone and dial the telephone number or speed dial number again. Note: • A callback will be cancelled if not answered within 30 seconds.
Samsung DCS Keyset User Guide Internal Calls Calling Other Extensions 1. Dial the extension number or group number. 2. Wait for the party to answer. If you hear a brief tone burst instead of ringback tone, the extension you called is set for Voice Announce or Auto Answer. Begin speaking immediately after the tone. 3. Finish the call by replacing the handset or pressing the ANS/RLS key.
Voice Announce Mode When another extension calls you, your keyset will sound a brief attention tone and you will hear the caller's announcement. 1. Press the ANS/RLS key to turn on the microphone and speak hands-free. OR Lift the handset to reply. 2. To finish the call, replace the handset or press the ANS/RLS key. Note: To set Voice Announce mode, see Customising Your Keyset.
Samsung DCS Keyset User Guide Busy Extension Camp-On When you call another extension and receive a busy signal but you do not want to wait for a callback: 1. Press the CAMP key, if assigned OR Press the CAMP soft key. OR Dial 45. The called extension will receive off-hook ring tone repeated every few seconds and its first available CALL key will flash green to indicate your call is waiting. 2. Wait for the called party to answer.
Barge-in On An Extension The Barge-in feature allows you to barge in on a conversation currently in progress at another extension. Barge-in is an optional feature and your keyset must be programmed to allow it to access this feature. See your system administrator if you require this. If you dial an extension which is busy, press the BARGE key, if assigned, or the SCROLL key and then the BARGE-IN soft key to barge in on the conversation.
Samsung DCS Keyset User Guide Call Processing System Hold • When you are connected to a call, press the HOLD key. The call will go on hold and flash green at your keyset. If this call appears on a line key at other keysets, it will flash red at those keysets. • To take the call off hold, press the flashing key and the green light will go steady green again. Resume conversation.
If you do not answer this recall within a pre-programmed period of time, it will go to the system operator. Consultation Hold When you are talking on an outside line and it is necessary to consult with another extension: 1. Press the TRSF key and receive transfer dial tone. Your call is placed on transfer hold. 2. Dial the extension number. 3. Consult with the internal party. 4. Press the TRSF key to return to the outside party or hang up to transfer the outside call to the extension.
Samsung DCS Keyset User Guide Transferring Calls You can transfer a call from your extension to another number in one of two ways. You can do a ‘screened’ transfer and inform the called party who is calling, or you can do a ‘blind’ (unscreened) transfer without notification. 1. While on a call, press the TRSF key and dial an extension number, group number or external number. OR Press a DSS key or station group key. Your call is automatically put on transfer hold. 2.
Transfer With Camp-On When you are transferring a call to another extension and you receive a busy signal, you may camp the call on to the extension. Simply hang up when you hear the busy signal. The called party will be alerted that a call is waiting for them. Note: If you receive No More Calls tone, the extension has no key available to receive another call. Press TRSF to return to the outside caller.
Samsung DCS Keyset User Guide Conference Calls You may connect up to five parties (you and four others) in a conference call, in any combination of outside lines and internal extensions in any order. 1. While engaged in a conversation, press the CONF key (if assigned), or the CONF soft key, or press the TRSF key and dial 46. You receive conference tone. 2. Make another call (internal or outside) and press the CONF key, or the CONF soft key, or the TRSF key and receive conference tone. 3.
Forwarding Calls You can forward your calls to another extension, group of extensions or an external telephone number. Program a destination for the type of forwarding you want as shown below. If you have FWD ALL, FWD BUSY, and FWD NO ANSWER keys, press one to turn that forward feature on. A steady red light reminds you what forward condition is activated. Clearing Call Forwarding You can clear all call forwarding set at your extension by dialling 600.
Samsung DCS Keyset User Guide Forward No Answer To forward calls to another extension when you do not answer: 1. Dial 603 followed by the extension or group number. 2. When you receive confirmation tone and LCD message, hang up. Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling.
Forward To An External Number To forward outside calls to another outside number, you can use the FWD EXTERNAL key programmed on your keyset with the required external number to forward to. Simply press this key to set forwarding (the LED lights and the message is displayed), and press it again to turn forwarding off. However, if you do not have this key programmed: 1. While on-hook, press the TRSF key and dial 102. 2. Dial 5. 3.
Samsung DCS Keyset User Guide Note: • Group numbers for each system type are: DCS and Compact II=01–20; 816=01–08; 408/408i=01–04. • A group pickup key can have an extender for a specific pickup group (see Adding Extenders to Key Assignments under Display Features). • If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before dialling the access code.
Dialling Features Some dialling features can be accessed using programmable keys or feature access codes only. Others can be accessed using programmable keys, feature access codes, or the soft key menus on the LCD. Use of the soft key menus is described at the beginning of this guide (see Things You Should Know).
Samsung DCS Keyset User Guide Programming Personal Speed Dial Numbers You can program frequently-dialled telephone numbers in your personal speed dial list. An extension has 10 (00–09) speed dial numbers by default but may be assigned up to fifty (00-49). Your system administrator can tell you how many are assigned to your extension. 1. 2. 3. 4. While on-hook, press the TRSF key and dial 105. Dial a speed dial number (00–49). Dial a line or line group access code.
D is used for pulse-to-tone conversion (“C”). If your system uses rotary (or pulse) dialling C.O. lines, pressing D while entering a speed dial number causes all subsequent digits to be sent as DTMF tones. E is used to hide digits. You may want to hide some phone numbers so that they will not show in the display when you dial the speed dial number later. When you are programming the phone number, press E before entering the digits you want to hide. The symbol “[” is displayed.
Samsung DCS Keyset User Guide Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling. Last Number Redial To redial the last outside number you dialled: • Press the REDIAL key OR Press the LNR key (if assigned) OR Press the SCROLL key, then the CALL soft key and the LNR soft key. OR Dial 19.
Chain Dialling You can manually dial additional digits following a speed dial number or chain as many speed dial numbers together as required. • After the first speed dial number is answered, press the SPD key again and dial another speed number OR manually dial additional digits following a speed dial number. Automatic Redial/Retry When you are making an outside call and you receive a busy signal, the system can automatically redial the number for you.
Samsung DCS Keyset User Guide Voice Dialler Voice Dialler allows you to record a voice pattern in a digital format and store it in an addressable location. When the Voice Dialler feature is activated, it will identify, retrieve and process the associated stored data. This latest technology has been applied to the area of personal speed dialling. It allows the calling party to speak a name into the handset and have the system place a call.
Placing a Voice Dialler Call 1. Lift the handset. 2. Press the VDIAL key, if assigned, or dial 681. 3. Speak the desired name carefully into the handset. If you are successful, the call will be placed. If you hear error tone, repeat the procedure. Possible Causes For Voice Dialler Failure • • • • • The desired name is not recorded. The personal speed dial bin you have selected is empty. All trunks or trunk group are busy. You are denied access to the Voice Dialler feature.
Samsung DCS Keyset User Guide Paging and Messaging Making An Internal Page To make an announcement through keyset speakers: 1. Lift the handset. 2. Press the PAGE key, if assigned OR Press the SCROLL key, OTHER soft key and PAGE soft key OR Dial 55. 3. Dial the desired zone number 1, 2, 3 or 4. (If using a 408/408i system, dial 1 or 2 only.) OR Dial 0 to page all internal zones. 4. After the attention tone, make your announcement.
4. After the attention tone, make your announcement. Note: 1. DCS-816, 408 and 408i systems have one external zone only (zone 5). 2. If you have a separate PAGE key dedicated to each page zone, press the dedicated PAGE key to dial the required zone number. All Page To page all designated keysets and external speakers at the same time: 1. Lift the handset. 2. Press the PAGE key, if assigned OR Press the SCROLL key, OTHER soft key and PAGE soft key OR Dial 55. 3.
Samsung DCS Keyset User Guide Call Park and Page When you have a call for someone who is away from their desk, you can park the call and page the requested party. 1. While in conversation with the caller, press the PAGE key (if assigned) or the PAGE soft key. The call is automatically parked at your extension. 2. Dial the desired page zone and announce the parked call and your extension number or the line number. Hang up. To retrieve a parked call: 1. Press the PARK key, if assigned, or dial 10. 2.
2. Hang up. The MSG key(s) on the called extension or on all of the extensions in the group will flash. (Some phones have a special multi-function lamp which flashes. Standard telephones receive special dial tone as a message indication.) Note: • An extension can have up to five message indications. • If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling.
Samsung DCS Keyset User Guide Note: • You can first view message indications and return them in the order you choose. See Viewing Message Indications under Display Features. • If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling. • If a message has been left at your keyset by a keyset in Auto Answer mode, you must manually cancel the message after it has been returned.
To set a message: • Dial 48 followed by a message code 01–20. To cancel this message: • Dial 48 followed by 00. Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling. You may also have several programmed message (PMSG) keys, each with a different message code. If so: • • Press any PMSG key. The message is set and the key will light red. Press the key again to turn the light off.
Samsung DCS Keyset User Guide Convenience Features Do Not Disturb (DND) Use this feature when you want to block incoming calls to your keyset. You will still be able to make outgoing calls while in DND mode. • While on-hook, press the key marked DND (if available) OR Press the programmed DND key (if available) OR Dial 401. The DND key flashes and ‘DO NOT DISTURB’ is displayed on the LCD. To cancel DND: • Press the DND key or dial 400. The DND key LED turns off and your display returns to normal.
Mute You can mute the handset transmitter or the microphone during any conversation so you cannot be heard. 1. Press the MUTE key or the MUTE soft key. The key will light red and ‘mute’ (lower case) is displayed. 2. To resume speaking, press the MUTE key or mute soft key. The key LED turns off and ‘MUTE’ (upper case) is displayed. Background Music When a music source is supplied, you can listen to music through the speaker in your keyset. • • While on-hook, press the HOLD key to hear music.
Samsung DCS Keyset User Guide 3. Dial the time you want the alarm to sound. Enter the time as HHMM (hours and minutes) using a 24-hour clock. For example, 1430 is 2:30pm. 4. Dial 1 (TODAY) or 2 (DAILY) to select the alarm type. Dial 0 (NOTSET) if you choose not to set the alarm. 5. Press the TRSF key. 6. Repeat for each alarm if needed. To cancel any alarms you have set: 1. Press the TRSF key and dial 112. 2. Dial the alarm number 1–2 (or 1–3 for DCS systems). 3. Press the HOLD key.
Calling the Doorphone/Room Monitor You can call the doorphone and listen to what is happening outside or in another room. • Dial the extension number of the doorphone. You will be connected to the door phone and you can listen or have a conversation. Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling.
Samsung DCS Keyset User Guide Note: Depending on speaker volume and the acoustics of your office, it may be advisable to turn the group listening feature off before hanging up. This will eliminate any momentary squeal. Account Codes When equipped with optional equipment, your Samsung DCS system allows calls to be charged to a specific account. You must have an ACCT key programmed on your keyset to use this feature. • • During any outside call, press the ACCT key.
To unlock your keyset: 1. While on-hook, press the TRSF key and dial 100. 2. Dial your 4-digit extension passcode. 3. Dial 0 to set the keyset to Unlocked. 4. Press the TRSF key to store your selection. Note: • If Locked Out is selected, the HOLD key will flash slowly. • If Locked All is selected, the HOLD key will light steady. Off-Hook Voice Announcing (OHVA) While engaged on another call, a keyset can receive voice announcements (OHVA calls) from other keysets.
Samsung DCS Keyset User Guide Receiving OHVA Calls If you receive an off-hook voice announcement, you will hear the announcement in the handset receiver or over the keyset speaker while you are talking on your current call. • • Press the flashing CALL key on your keyset. This will place the current call on hold and allow you to talk to the announcing party. To return to your original call, press the key corresponding to your original call. This will disconnect the OHVA call.
• When you wish to return your extension to the group, press the IN/OUT key again. The key LED will light red. If you wish to exit/enter the group but you do not have an IN/OUT key: • Dial 53 followed by the group number (e.g. 503), and then dial 0 to exit or 1 to enter the group OR Use the SCROLL key and the IOG soft key to enter the group number to exit/enter. Note: If the Hot Keypad feature has been turned off, you must first lift the handset or press the SPEAKER key before you begin dialling.
Samsung DCS Keyset User Guide Customising Your Keyset Select Ring Tone You can select one of eight ring tones for your keyset. 1. While on-hook, press the TRSF key and dial 111. 2. Dial a number 1–8 or press the VOLUME Up and Down keys to hear each tone. 3. When you hear the tone that you want, press the TRSF key. Change Your Passcode By default, your extension passcode is 1234. You can change this passcode to any 4-digit number. 1. While on-hook, press the TRSF key and dial 101. 2.
Automatic Hold While on an outside call, pressing a line key, route key or a flashing CALL key will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset. 1. While on-hook, press the TRSF key and dial 110. 2. Dial 001 to turn Automatic Hold on or 000 to turn it off. (Or use the soft keys and VOLUME Up/Down keys to select.) 3. Press the TRSF key to store your selection.
Samsung DCS Keyset User Guide Key Confirmation Tone You normally hear a short beep (confirmation tone) each time you press a key on the dial pad. This tone can be turned on or off. 1. While on-hook, press the TRSF key and dial 110. 2. Dial 041 to turn tones on or 040 to turn tones off. (Or use the soft keys and VOLUME Up/Down keys to select.) 3. Press the TRSF key to store your selection.
Display Features Call Progress Displays During everyday call handling, your keyset display provides information that is helpful and, in some cases, invaluable in keeping you informed of what is happening and who is calling. In some cases you are prompted to take an action and in others you receive information on the call. Directory Information A directory name of up to 11 characters can be assigned to each extension.
Samsung DCS Keyset User Guide 1. Press the TRSF key and dial 104. 2. Enter the name using the dial keypad. Each press of a key selects a character. Pressing a different key moves the cursor to the next position. For example: if your name is “Joanne”, press 5 once to get the letter “J”; then press 6 three times to get the letter “O”; then press 2 once to get “A”. Continue selecting characters using the following table to complete the name.
Personal Speed Dial Names Each personal speed dial number you create can have a name of up to 10 characters assigned to it. This name is used to select the speed dial bin when you use the Dial by Directory feature (see below). To program speed dial names: 1. Press the TRSF key and dial 106. 2. Dial the speed dial bin number 00–49. 3. Enter the name using the procedure described in Setting Extension Names, above. 4. Press the TRSF key to store the speed dial name. 5.
Samsung DCS Keyset User Guide 5. Press the DIR key or the DIAL soft key to dial the number. Display Number Dialled Display keysets show digits as they are dialled. They will stay in the display until the call duration timer comes on automatically or the TIMER key is pressed (see below). If the call duration timer is not used, the number dialled is displayed until the call is released, transferred or put on hold. Call Duration Timer The system can be set to time outside calls automatically.
1. When the keyset is idle, press the TIMER key or press the SCROLL key and select TIMER from the OTHER menu to start timing. The timer shows in the display. 2. Press the TIMER key or TIMER soft key to stop timing. 3. Lift the handset and replace it. The display will return to normal. Note: If you attempt to start the timer manually while the automatic timer is on, the call duration time is restarted.
Samsung DCS Keyset User Guide Alarm Reminder Messages You can use the appointment reminder/alarm feature (refer to the Convenience Features section of this guide) and create a 16-character reminder message. When the alarm rings, your message will appear instead of the normal ‘ALARM REMINDER’ message. To program reminder messages: 1. Press the TRSF key and dial 116. 2. Dial the alarm number 1 or 2 (or 1, 2, or 3 for DCS systems). 3. Dial the time you want the alarm to go off.
1. While on-hook, press the TRSF key and dial 107. 2. Use the VOLUME keys to scroll through your programmable keys. When the key you require is displayed, press the right soft key. OR 3. Press the programmable key to which you want to add an extender. 4. Enter the key extender. The following table shows the keys which can be assigned extenders, and the range of values allowed for each key according to system type.
Samsung DCS Keyset User Guide Calling Line Identification Presentation (CLIP) CLIP is information that can be displayed when a call is received at your keyset, normally the caller’s name or number. Note: CLIP is supported by 408i systems but not 408 systems. Selecting Your CLIP Display You can decide if you want to see the name or number in the display, or no CLIP display. Regardless of which one is selected, you can use the NND function to view the remaining CLIP information.
Redialling a Saved CLIP Number To redial a number that has been saved, press the SAVE key or dial 19. Note: If the Hot Keypad feature has been turned off, you must lift the handset or press the SPEAKER key before you begin dialling. Storing a CLIP Number At any time during an incoming call that provides CLIP information, you can save the CLIP number as a speed dial number in your personal speed dial list. To store a CLIP number in a personal speed dial bin: • Press the STORE key.
Samsung DCS Keyset User Guide 3. You can now answer the call by pressing the ANS soft key. OR You can use the NND menu to view more information about this call. OR You can return to the idle condition by pressing the IGNORE soft key. If you are on a call: 1. Press the INQIRE key. OR Press the CLIP soft key and then the INQIRE soft key. Your existing call will go on hold. 2. Dial the trunk number. 3. You can now answer the call by pressing the ANS soft key.
1. Press the REVIEW key. OR Press the SCROLL key and the OTHER soft key. Press the SCROLL key again and select REVW from the CLIP menu. 2. If you have entries in your review list, the oldest call will be shown first. 3. You can now press CLEAR to clear this entry. OR Press NND to view more information about this call. OR Press DIAL to call this person back. OR Press the SCROLL key and then press the STORE soft key to save this number in a personal speed dial location (bin).
Samsung DCS Keyset User Guide Add-On Module The add-on module (AOM) is used when you need more programmable keys. The extra programmable keys are used exactly like those on your keyset. They can be programmed to be DSS keys, C.O. line (DTS) keys, one-touch speed dial keys, and so on. A maximum of two AOMs can be connected to a single keyset. Note: AOMs are not supported by 408/408i systems.
Personal Speed Dial Numbers CODE NAME TELEPHONE NUMBER 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 – 63 –
Samsung DCS Keyset User Guide 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 – 64 –
38 39 40 41 42 43 44 45 46 47 48 49 – 65 –
Samsung DCS Keyset User Guide Changed System Access Codes Please enter the feature access codes configured for your system if different from the default codes printed on the back cover.
SYSTEM ACCESS CODES DCS telephone systems have the following preset (default) feature access codes. These codes can be used if a key is not available for the feature you want to use. Standard telephone users must always dial these codes.
