User Manual

Table Of Contents
English
English11
Before you start
Installation
Install the product according to the instructions in this manual and local codes.
Installing the product
1. Select a solid, level location with adequate space for the following clearances.
Top 25 mm
Sides 14 mm
Rear 15 mm
- If the minimum clearances are not met, performance will decrease due to poor ventilation and
condensation may occur on the product exterior.
- Do not install the product in direct sunlight or in an area that is too hot or too cold. The ambient
temperature must be between 10 °C - 35 °C. If the ambient temperature is too high or too low, the
product may not operate normally, or performance may decrease.
A
2. Turn the levelling feet (A) clockwise or
counterclockwise to adjust the height until the
product is level.
B
NOTE
If the product wobbles or if you want to raise the
height of the rear side, assemble the provided rear
levelling feet (B) on the bottom-rear sides of the
product.
Untitled-4 11 2021-07-16  11:50:00