User’s Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. ※ This manual is based on model Digimax A503.
Instructions Getting to know your camera ■ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.60) Take a picture. (p.12) Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.62) Check the camera’s power Check the camera’s power.
Danger : DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ■ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
Contents READY ●System chart ●Identification of features ■Front & Top ■Back & Bottom ■Side/ 5-function button ■Self-timer lamp ■Camera Status Lamp ■Mode icon ●Connecting to a Power Source ●Inserting the memory card ●Instructions on how to use the memory card 4 5 5 6 7 7 7 7 8 8 9 RECORDING 11 ●LCD monitor indicator 12 ●Changing the recording mode 12 ■Selecting the [MODE] menu ■If the [STILL & MOVIE] menu was 12 selected ■If the [FULL] menu was selected 13 13 ●Starting the recording mode 13 ■How to use the
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. System Requirements < Included items > Computer (see p.62) Camera case User manual, Product warranty DPOF compatible printer (see p.44) SD memory card/ MMC (see p.9) CR-V3 battery Camera strap PictBridge compatible printer(see p.46) Software CD (see p.
Identification of features Front & Top Shutter button Power button Microphone Flash Self-timer lamp Lens Focus ring 《5》
Identification of features Back & Bottom Camera status lamp M(Mode) button Zoom W button (Thumbnail) Zoom T button (Digital zoom) Strap eyelet LCD monitor E (Effects) button +/-, Delete button USB connection port Tripod Socket 《6》 5 function button Play mode button
Identification of features ■Self-timer lamp Side/ 5-function button Icon Status Blinking Battery chamber cover Description - For the first 7 seconds, the lamp blinks at 1 second intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds Blinking later a second picture will be taken.
Connecting to a Power Source ■You can use batteries only to provide the camera with power. ● We recommend using batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below. - Non rechargeable batteries : 2 X AA Alkaline (High Capacity) CR-V3 type - Lithium Ion battery - Rechargeable batteries : 2 X AA Ni-MH (SNB-2512) ● It is easy to buy alkaline batteries.
Instructions on how to use the memory card ●Be sure to format the memory card (see p.51) if you are using a newly purchased memory for the first time, or if contains data that the camera cannot recognise, or if it contains images captured with a different camera. ●Turn off the camera power whenever the memory card is being inserted or removed. ●Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card INFORMATION ●Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ■When using a 24(Approx. 8)MB memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter. Recorded image size ■The camera can use SD Memory Cards and MMC (Multi Media Cards).
LCD monitor indicator ■The LCD monitor displays information about the shooting functions and selections. No. Description 1 Recording mode Icons Page p.12~15 ⑲ ⑳ ① ⑱ ② ⑰ ③ 2 Battery 3 Continuous shot p.8 AEB p.32 4 Flash p.18~20 5 Self-timer p.20 ⑯ 6 Macro p.16 ④ ⑮ 7 Metering p.31 ⑤ ⑭ 8 Card inserted indicator - ⑥ ⑬ 9 Camera shake warning 10 Date/ Time ⑦ ⑫ 11 Exposure compensation p.27 ⑪ 12 White Balance p.
Changing the recording mode ■ You can select the desired working mode by the M (mode) button located on the back of the camera and [MODE], [MODE SET] menu. Auto, Program, movie clip, scene (night, portrait, landscape, sunset, dawn, backlight, fireworks, beach & snow) camera modes are available. ●Selecting the [MODE] menu 1. Insert the battery (p.8). 2. Insert the memory card (p.8). As this camera has a 24MB internal memory, you do not have to insert the memory card.
Changing the recording mode ●Changing the recording mode : If the [FULL] menu was selected Steps from 1-4 are the same as those for selecting the [MODE] menu. 5. The recording mode used just before will display. 6. Press the M (Mode) button located on the back of the camera and the mode selection menu will display. 7. To select the Auto, Program, Movie clip or Scene modes, press the Left/ Right button. To move between the Auto, Manual, Movie clip menu line and Scene menu line, press the Up/ Down button.
Starting the recording mode ■Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. ●Using Successive Recording Steps from 1-2 are the same as those for MOVIE CLIP mode. 3. Point the camera towards the subject and compose 00:00:08 the image by using the LCD monitor.
Starting the recording mode ■How to use the VOICE RECORDING mode A voice recording can be recorded for as long as the available recording time of the memory capacity allows. 1. In any mode with the exception of the Movie clip, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording [VOICE RECORDING mode] time allows.
Starting the recording mode ● Normal( ) focus mode The focus range is 1.0m~infinity. No icons will display on the LCD monitor when you select this focus mode. ※To prevent the image from being dim, maintain the focus range at 1.0m ~ infinity. ● Macro ( ) focus mode The focus range is 0.2m. A Macro icon( ) will display on the LCD monitor when you select this focus mode. ※To prevent the image from being dim, maintain the focus range at 0.2m.
ZOOM W/T button ● If the menu is not displayed, this button works as the DIGITAL ZOOM button. ● WIDE Zoom Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM W button will reduce the digital zooming in steps. Releasing ZOOM W button stops digital zooming. Pressing the ZOOM W button ● TELE Zoom Digital zoom TELE : Pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting.
Voice recording( )/ Voice memo( )/ UP button ■ While the menu is showing, press the UP button to move up the sub menu cursor. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo button. You can record your voice or add your voice-over to a stored still image. Refer to page 15 for more information about the voice recording. ● Recording a voice memo 1. Select the STILL IMAGE mode by pressing the mode button. 2. Press the VOICE MEMO( ) button.
Flash ( )/ Left button INFORMATION ●If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move until the second flash fires. ●Using the flash frequently will reduce the life of the battery. ●Under normal operating conditions the charging time for the flash is normally within 5 seconds. If the battery is weak, the charging time will be longer.
Flash ( )/ Left button Self-timer ( ●Available flash mode, by recording mode ● Selecting the self-timer X X O X X X X X X X O X O O X O X X X X X X X X O X X X X X O X X X X O O X X X X X X X O O O O O O O O X O X Self-timer ( )/ Right button )/ Right button ■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.
MENU/ OK button M (Mode) button ■MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when Movie clip, Auto, Program and Scene modes are selected.There is no menu available when the Voice recording mode is selected. ■ You can select the desired recording mode.
M (Mode) button E (Effect) button ●How to use the mode button : In case of [FULL] sub menu and Auto mode ■It is possible to add special effects to your images by using this button. ■Still image mode : You can select the colour, focus, composite and frame menus. Movie clip mode : You can select the colour menu.
Special Effect : Colour ■By using the camera’s digital processor, it is possible to add special effects to your images 1. Press the E button in the still image mode or Movie clip mode. 2. Select the menu tab by pressing the Left/Right button. [Still image mode] Special Effect : Preset focus frames ■You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. 1. Press the E button in the program mode. 2.
Special Effect : Composite shooting ■You can combine 2 ~ 4 different shots in a still image. 1. Press the E button in the program mode. 2. Select the menu tab by pressing the Left/ Right button. 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. - INFORMATION : cancels the composite shooting : 2 different shots are combined in a still image. : 3 different shots are combined in a still image. : 4 different shots are combined in a still image.
Special Effect : Photo Frame ■You can add 9 types of frame-like borders to a still image you want to capture. 1. Press the E button in the program mode. 2. Select the menu tab by pressing the Left/ Right button. 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. - +/- button ■You can use the +/- button to adjust the values for the RGB, ISO, white balance and exposure compensation.
+/- button ■ISO : You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. ■White balance : The white balance control allows you to adjust the colours to appear more natural. ●Selecting an ISO Sensitivity 1. Press the +/- button, and then use the UP and DOWN buttons to select the ISO icon( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value.
+/- button ●Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. ■Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the +/- button. ●Compensating Exposure 1.
Using the LCD monitor to adjust the camera settings ■You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. ※ The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. - When there is no battery capacity.
How to use the menu Mode 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT and RIGHT buttons to navigate through the menus. SIZE 2560X1920 2272X1704 2048X1536 1600X1200 MOVE: Press the LEFT or RIGHT button. QUALITY S. FINE FINE NORMAL Press the LEFT or RIGHT button. METERING MULTI SPOT SET:OK 3. Use the UP and DOWN buttons to select a sub menu.
MODE SET ■You can select the desired recording mode. [AUTO] [PROGRAM] : For shooting basic still image MODE SET : You can manually configure all AUTO functions. PROGRAM [MOVIE] : For taking a movie clip MOVIE NIGHT [NIGHT] : Use this for shooting still MOVE: SET:OK images at night or in other dark conditions. [PORTRAIT] : To take a picture of a person. [LANDSCAPE] : Scenery with green woods or blue sky. [SUNSET] : For taking pictures of sunsets. [DAWN] : Daybreak scenes.
Quality/ Frame rate Metering ■You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. [MULTI] ( MOVIE CLIP mode STILL IMAGE mode Mode ■If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. Icon Sub menu S.FINE FINE NORMAL 24FPS 15FPS File Format jpeg jpeg jpeg avi avi [SPOT] ( QUALITY FRAME RATE S.
Continuous Shooting ■Select the number of pictures in continuous shooting. - [SINGLE] : Take one picture only - [CONTINUOUS] : Images will be taken SHOOTING SINGLE continuously until the shutter CONTINUOUS button is released. The shooting AEB capacity depends on the memory. - [AEB] : Take three pictures in a series in [PROGRAM mode] different exposures: standard exposure (0.0EV), short exposure (-0.5EV),and over exposure (+0.5EV). Use the mode if it is hard to decide exposure of the object.
OSD(On Screen Display) information ■In any mode with the exception of VOICE RECORDING mode, you can check the recording status in the LCD monitor. OSD INFORMATION FULL OSD BASIC OSD SAVE MODE ■Idle mode : If you select the [SAVE MODE] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. - To use the camera again, press any of the camera buttons except the power button.
Starting play mode INFORMATION ● Even if the camera's power is off, you can start the play mode by pressing the play mode button. ● Press the shutter button in Play mode to switch to the currently set shooting mode. ● Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip and press the Play & Pause button ( ) to play back. - To pause a movie clip file while playing it back, press the play & pause button again.
LCD monitor indicator Using the camera buttons to adjust the camera ■In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. ■The LCD monitor displays shooting information about the displayed image. 100-0009 ① ② ③ ⑦ Thumbnail( )/ Enlargement( ) button ●You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ④ ⑤ ⑥ No. Description 1 Play mode Icon Page - 2 Battery p.
Thumbnail( )/ Enlargement( ●Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the bottom left of the LCD monitor.
Voice ( ) memo/ Up button ■When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up. ■When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice to a stored still image. ●Adding a Voice Memo to a Still Image 1. Press the LEFT/ RIGHT button to select an image that you wish to add sound to. 2. Press the voice memo button ( ) and the voice memo indicator will display.
Delete ( ) button ■This deletes images stored on the memory card. ●Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT/ RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor. 3. Select the sub menu values by pressing the UP/ DOWN button and then press the OK button. If [DELETE] is selected : deletes the selected images. If [CANCEL] is selected : cancels "Delete Image".
Setting up the play back function using the LCD monitor ■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY button or shutter button. Menu tab Main menu Sub menu Secondary menu SHOW PLAY/ REPEAT INTERVAL 1. 3. 5.10 SLIDE OFF EFFECT RESIZE PROTECT Main menu DELETE ALL Page DPOF p.
Setting up the play back function using the LCD monitor ■This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu IMAGES AUTO SET Sub menu Secondary menu ONE PIC - ALL PICS - NO - YES - Menu tab Main menu Sub menu TYPE p.
Starting the slide show ■ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab. ● Start the slide show : The slide show can start only in the [SHOW] menu. 1. Use the Up/ Down buttons to select the [SHOW] menu and press the Right button. SLIDE SHOW PLAY 2.
Rotating an image Resize ■You can rotate the stored images by various degrees. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button. ■Change the resolution (size) of pictures taken. Select [USER IMAGE] to save an image to be the start-up image. The resized image will have a new file name. ROTATE RIGHT 90° LEFT 90° 180° HORIZONTAL EXIT:MENU MOVE: 1.
Protecting images Deleting all images ■This is used to protect specific shots from being accidentally erased (LOCK). It also unprotects images that have been previously protected (UNLOCK). ■Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e.
DPOF ■DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. ■The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. ■This function is not available for Movie clips and Voice recording files. ■The DPOF file is only stored on the memory card.
DPOF : PRINT SIZE ■You can specify the print size when printing images stored on the memory card. The [PRINT SIZE] menu is available only for DPOF 1.1 compatible printers. ●Setting the Print Size 1. Press the play mode button and press the menu button. DPOF 2. Press the LEFT/ RIGHT button and select the STANDARD DEFAULT [DPOF] menu tab. INDEX 3X5 PRINT SIZE 4X6 3. Select the [PRINT SIZE] menu by pressing the CANCEL 5X7 UP/ DOWN button and press the RIGHT button. BACK : SET:OK 4.
PictBridge ■You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ●Connecting the Camera to a Printer 1. Slide the power switch to turn the camera power on. 2. Use the supplied USB cable to connect the camera to the printer as shown below. CONNECTING PRINTER 3. Turn on the printer to connect the camera to the printer. 4.
PictBridge : Print Setting ■AUTO SET 1. Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. [NO] : [CUSTOM SET] values are kept. [YES] : All values in the [CUSTOM SET] are automatically changed.
PictBridge : Printing PictBridge : DPOF Printing ■Printing Pictures 1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab. PRINT 2. Use the UP and DOWN buttons to select the STANDARD desired submenu value, and then press the OK INDEX button. [STANDARD] : Print the pictures stored in the MOVE: memory card in set numbers. One picture is printed on one piece of paper. [INDEX] : Print multiple images on one sheet of paper. 3.
Setup menu ■In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings.
Setup menu [ File name ] [ Auto power off ] ■ This function allows the user to select the file naming format. ■ This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. ● Assigning File Names 1. In any mode with the exception of Voice Recording mode, press the MENU button. SETUP FILE SERIES 2. Press the LEFT/ RIGHT button and select the PWR SAVE RESET [SETUP] menu tab. LANGUAGE FORMAT 3.
Setup menu [ Formatting a memory ] [ Setting up the Date / Date type ] ■ This is used for formatting the memory. If you run [FORMAT] on the memory, all images already in the memory, including protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. ■ You can change the date that will be displayed on the captured images and set up the date type. ● Sub menus [NO] : The memory will not be formatted.
Setup menu [ BEEP ] [ Imprinting the recording date ] ■ There is an option to include DATE/ TIME on still images. ● Sub menus [OFF] : The DATE & TIME will not be imprinted on the image file. [DATE] : Only the DATE will be imprinted on the image file. [DATE & TIME] : The DATE & TIME will be imprinted on the image file. ■ If you set the operation beep to ON, various beeps will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status.
Setup menu Start up image [ Initialisation ] ■ All camera menu and function settings will be restored to their default values. However, values for DATE, TIME and LANGUAGE will not be changed. ● Sub menus [NO] : Settings will not be restored to their defaults. [YES] : All settings will be restored to their defaults. SETUP BEEP LCD Q.VIEW RESET BACK: NO YES SET:OK ■ You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
Important notes Be sure to observe the following precautions! ■This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight; or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes ■If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. ■Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc.
Warning indicator Before contacting a service centre FILE ERROR! ㆍFile error → Format the memory card ㆍMemory card error → Contact a camera service centre The camera power ceases while in use ㆍThe battery are exhausted → Insert fresh batteries ㆍThe camera is turned off automatically → Turn on the camera power again. LOW BATTERY! ㆍThere is low battery capacity → Insert fresh batteries Battery quickly loses power ㆍThe camera is being used in low temperatures → Keep the camera in warm conditions (i.e.
Before contacting a service centre The camera suddenly stops working while in use ㆍThe camera was stopped due to a malfunction → Remove/ re-insert battery and switch the camera on The images don't play back ㆍIncorrect file name (Violation of DCF format) → Do not change the image file name The images are unclear ㆍAn incorrect focus mode is selected. → Select a correct focus mode related to the distance.
Specifications ■Image Sensor - Type : 1/2.5" CCD Effective Pixels Total Pixels ■Effect : Color: Normal, B&W, Sepia, Negative, Red, Green, Blue, RGB, Highlight, Composite, Photo Frame A503 Approx. 5.0 Mega-pixel Approx. 5.3 Mega-pixel A403 Approx. 4.0 Mega-pixel Approx. 4.2 Mega-pixel ■Lens - Focal Length : SHD Lens f=6.1mm (35mm film equivalent:36mm) - F No. : F3.2 / F7.0 - Digital Zoom :·Still Image mode: 1.0X ~ 5.0X ·Play mode: 1.0X ~ 8.0X(depends on Image size) ■LCD : 2.
Specifications Software Notes - Capacity [24(Approx. 8)MB] Superfine Fine Normal * 5M 9 18 27 4M 12(4)) 22(7) 34(11) 3M 15(5)) 28(9) 41(14) 2M 24(8)) 45(15) 65(22) 1M 55(18) 95(32) 127(43) VGA 122(42) 182(62) 218(75) ※ These figures are measured under Samsung's standard conditions and may vary depending on shooting conditions and camera settings.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ※ This manual is based on the Digimax A503. A403 may differ from A503 in some contents. ■Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Setting up the application software 3. After restarting the computer, connect the camera to your PC with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※If your OS is Windows XP, an image viewer program will open. If the download window of the Digimax Master software opens after starting Digimax Master, the camera driver was set up successfully.
Starting PC mode • If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". • In this mode, you can download stored images to your PC through the USB cable. • The LCD monitor is always turned off in this mode. ■ Connecting the camera to a PC 1. In any mode with the exception of Voice Recording mode, press the Menu button. 2. Press the LEFT/ RIGHT button and select the DATE TIME [SETUP] menu tab. IMPRINT 3.
Starting PC mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. Removing the removable disk ■Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ■Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. Uninstalling the USB Driver for Windows 98SE ■ To remove the USB driver, refer to the process shown below. 1. Connect the camera and your PC, turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1.
Digimax Master ■ You can download, view, edit and save your images and movies with this software. This software is compatible with all Windows Operating Systems from Windows 98SE onwards. ■ To start the program, click [Start → Programs → Samsung → Digimax Master]. ● Downloading images 1. Connect the camera to your PC. 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded.
Digimax Master ● Image viewer : You can view the stored images. ① ● Image edit : You can edit the still image. ⑤ ⑥ ① ⑦ ② ④ ③ ④ ② ③ - Image viewer functions are listed below. ① Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ② Image selection window : You can select the desired images in this window. ③ Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Digimax Master FAQ ● Movie edit : You can combine a still image, movie clip, narration, and music files together in a single file. ■ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. → Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly.
FAQ Case 6 Case 7 Case 8 When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. → Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera the again.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO 《70》 MEMO
MEMO MEMO 《71》
MEMO 《72》 MEMO
SAMSUNG TECHWIN CO., LTD. SAMSUNG FRANCE S.A.S. SAMSUNG OPTO-ELECTRONICS UK LIMITED OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com BP 51 TOUR MAINE MONTPARNASSE 33, AV .DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMÉRIQUE : 00 800 22 26 37 27(Numéro Vert-Appel Gratuit) TEL : (33) 1-4279-2200 FAX : (33) 1-4320-4510 www.samsungphoto.