Operation Manual

《55》
Important notes
■If the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card.
■Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage
and keep the camera in its protective carry case at all times when not in use.
■Do not attempt to disassemble or modify the camera.
■Under certain conditions, static electricity can cause the flash unit to fire. This is
not harmful to the camera and is not a malfunction.
■Before an important event or going on a trip, you should check the camera
condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
Warning indicator
■There are several warnings that may appear on the LCD display
CARD ERROR!
ㆍMemory card error
→ Turn off the camera power and turn it on again
→ Insert the memory card again
→ Insert the memory card and format the memory card (p.51)
MEMORY ERROR!
ㆍInternal memory error
→ Turn off the camera power and turn it on again
→ Format the memory with the memory card removed. (p.51)
CARD LOCKED!
ㆍThe memory card is locked
→ SD memory card : Slide the write protect switch to the top of the memory card
CARD FULL!/ MEMORY FULL!
ㆍThere is insufficient memory capacity to take an image
→ Insert a new memory card
→ Delete unnecessary image files to free up some memory
NO IMAGE!
ㆍThere are no images stored on the memory
→ Take images
→ Insert a memory card that is holding some images