ENGLISH User's Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.
Instructions Use this camera in the following order Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM.(p.98) Take a picture (p.22) Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal.(p.
Contents READY Getting to know your camera About the icons Danger Warning Caution An FCC warning System chart Identification of features Front & Top Back & Bottom Side/ 5-function button Mode dial Connecting to a Power Source Using the batteries Removing the battery Using the AC power adapter (SAC-51, 5.
Contents Playing back a recorded voice LCD monitor indicator Using the camera buttons to adjust the camera Thumbnail/ Enlargement button Voice memo / Up button Play & Pause/ Down button LEFT/ RIGHT/ MENU/ OK button LCD button Delete button Setting up the play back function using the LCD monitor Deleting images Protecting images Starting the slide show Resize Rotating an image DPOF DPOF : STANDARD DPOF : INDEX DPOF : PRINT SIZE DPOF : CANCEL PictBridge PictBridge: Picture Selection PictBridge: Print Setting
Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as Batteries, Memory card etc.) to the A/S center. Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment.
Danger Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. Should any form of liquid or a foreign object enter the camera, do not use it.
Caution Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera. Do not short circuit, heat or dispose of batteries in fire. Do not insert the batteries with the reverse polarities. Remove the batteries when not planning to use the camera for a long period of time. Batteries may leak corrosive electrolyte and irreparably damage the camera's components. Do not fire the flash while it is in contact with hands or objects.
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > User manual Product warranty Pouch DPOF compatible printer(see p.68) Camera strap Software CD (see p.97) SD memory card (see p.
System chart System Requirements For Windows Computer (see p.107) PictBridge compatible printer(see p.71) PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz) Windows 98/ 98SE/ 2000/ ME/ XP Minimum 32MB RAM (XP : 128MB) 140MB of available hard-disk space USB port CD-ROM drive 800x600 pixels, 16-bit colour display compatible monitor (24-bit colour display recommended) For Macintosh Power Mac G3 or later Mac OS 9.0 ~ 10.
Identification of features Front & Top Mode dial Power button Mode dial lamp Shutter button Flash light amount sensor Jog dial Speaker Flash Auto Focus lamp Viewfinder Lens ring Lens Microphone Function lamp& Self-timer lamp Remote control sensor SCL-T3755/W3755 conversion lens and SLA-3537 connection adapter are designed for the Digimax digital cameras. They are sold separately depends on the camera model. Please check local retailers for the purchase.
Identification of features Back & Bottom LCD button Flash indicator lamp(Red) Autofocus indicator lamp(Green) Zoom W button (Thumbnail) Viewfinder MF/ DELETE button Zoom T button (Digital zoom) AEL button Strap eyelet S button LCD monitor 5-function button DC input connection point Tripod socket Play mode button USB/ AV connection terminal * When using the digital zoom to take a picture, the composition of the picture may be different depending on whether you are using the LCD monitor or the viewf
Identification of features Side/ 5-function button Battery holder Battery chamber cover Voice memo/ UP button SELF-TIMER/ RIGHT button FLASH/ LEFT button SD(MMC) memory card slot MENU/ OK button Macro / DOWN button Play & Pause button Battery chamber Mode dial You can select the desired working mode by using the mode dial located on the top of the camera. This digital camera has 8 recording modes. These are listed below.
Identification of features A/S/M mode The Aperture and Shutter can be set manually in the ASM mode. - A : Aperture priority mode - S : Shutter priority mode - M : Manual mode MySET mode This mode allows users to save frequently used shooting settings for later use. VOICE RECORDING mode A voice recording can be recorded for as long as the available recording time of the memory capacity allows.(Max : 1 hour) - Voice recording file type : *.
Identification of features Function lamp & Self-timer lamp Function Description Power on Blue light blinks and then turns off when the camera is ready to take a picture. After taking a picture Blue lamp blinks once. While movie recording Blue lamp blinks at a 1-second interval. While voice recording Blue lamp blinks at a 1-second interval. After selecting the remote controller mode Blue lamp blinks at a 1-second interval.
Connecting to a Power Source There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5.0V 2.0A). We recommend using batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below.
Connecting to a Power Source INFORMATION Important information about battery usage As for the AA type alkaline battery, you can only use the high capacity type. Do not use the normal type alkaline battery. When the camera is not used, turn off the camera power. Do not recharge the non rechargeable batteries. It may cause an explosion. Please remove the batteries if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera.
Instructions on how to use the memory card Maintenance of the memory card Be sure to format the memory card (see p. 79) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance.
Instructions on how to use the memory card INFORMATION If you open the battery chamber cover when the camera power is turned on, the power will turn off automatically.(Except for the exclusive type SLB-1437 battery) Don't remove the memory card when the Auto focus lamp(Green) is blinking as this may cause damage to data in the memory card. The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the the MMC Cards.
Inserting the memory card 1. Turn off the camera’s power and pull the battery chamber cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor), and then push the memory card into the card slot until you hear a click. 3. To close, push the battery chamber cover until you hear a click. If the memory card does not slide in smoothly, do not attempt to insert it by force.
When Using the Camera for the First Time If the camera is turned on for the first time, a menu will be displayed to set date, time and language in the LCD monitor. This menu will not be displayed after setting up the date, time and language. Set up the date, time and language before using this camera. Setting up the date, time and date type 1. Select the [DATE.TIME] menu by pressing the UP/DOWN button and press the RIGHT button. SET UP 2.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. [ Image & Full Status ] No. Description Icons Page 1 Battery p.15 2 Recording mode p.12~13 3 Camera shake warning p.27 4 Flash p.34 5 Self-timer p.36 6 Voice memo p.31 7 Macro p.32 8 Metering p.50 9 Manual/ Continuous auto focus p.44 10 Auto focus frame 11 Date/ Time 12 Exposure compensation 2004.09.01 01:00 PM p.
LCD monitor indicator 13 White Balance p.40 14 ISO p.41 15 RGB 16 Sharpness p.51 17 Image quality p.49 18 Image size / Continuous shot RGB p.41 3072, 2816, 2592, 2272, 2048, 1600, 1024, 640 / Number of available shots remaining 16 Remaining time (Movie clip/ Voice recording) 00:01:30/ 01:00:00 p.48 19 20 Optical/ Digital Zoom bar Starting the recording mode How to use the AUTO mode ( ) 1. Insert the batteries (p.15). Insert the batteries taking note of the polarity (+ / -). 2.
Starting the recording mode How to use the PROGRAM mode ( ) Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. Steps from 1-4 are the same as those for AUTO mode. 5. Select the PROGRAM mode by rotating the mode dial. 6. Press the menu button to configure advanced functions such as image size (p.48), quality (p.49), metering (p.50), picture effects (p.50), sharpness (p.
Starting the recording mode How to use the MySET mode ( ) This mode allows users to save frequently used shooting settings for later use. Steps from 1-4 are the same as those for AUTO mode. 5. Select the MySET mode by rotating the mode dial. 6. Press the menu button. 7. Use the Left/Right buttons to select the [LOAD] menu tap. Use the Up/Down buttons to select desired MYSET number. 8. Press the OK button to load the camera configuration saved in the MYSET number and close the menu screen. 9.
Starting the recording mode How to use the MOVIE CLIP mode ( ) Steps from 1-4 are the same as those for AUTO mode. 5. Select the MOVIE CLIP mode by rotating the mode dial. 6. The MOVIE CLIP mode icon and available recording time will display on the LCD monitor. 7. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor. Press the shutter button and movie clips are recorded for as long as the available recording time.
Starting the recording mode How to use the SCENE mode ( ) Use the menu to easily configure optimal settings for a variety of shooting situations. These include portrait, children, landscape, close-up, sunset, dawn, backlight, fireworks, beach scenes & snowscape and text recognition. Steps from 1-4 are the same as those for AUTO mode. 5. Select the SCENE mode by rotating the mode dial. 6. Press the MENU button and the SCENE mode menu will be displayed. 7.
Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [ Lightly press the shutter button ] [ Press the shutter button ] The available recording time may vary depending on shooting conditions and camera settings.
Using the camera buttons to adjust the camera The RECORDING(AUTO, PROGRAM, A/S/M, MySET, VOICE RECORDING, MOVIE CLIP, NIGHT SCENE, SCENE) mode function can be set up by using the camera buttons. POWER button Used for turning the camera's power on / off. If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Pressing the power button for over 3 seconds will deactivate the start-up sound function.
ZOOM W/T button This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. TELE Zoom Optical zoom TELE Digital zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. : When the maximum (3X) optical zoom is selected, pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting.
ZOOM W/T button Use the conversion lens Use the optional conversion lens for more flexibility in setting the focus distance. Types of the conversion lens 1. WIDE conversion lens : Install the WIDE conversion lens (model name: SCL-W3755) to change the focus of camera lens in 0.7 times. 2. TELE conversion lens : Install the TELE conversion lens (model name: SCL-T3755) to change the focus of camera lens in 1.7 times.
ZOOM W/T button INFORMATION To use the digital zoom the LCD monitor has to be turned on. Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. The zoom function can’t be activated during the movie clip recording. You may notice a decrease in image quality when using the digital zoom. Take care not to touch the lens to avoid taking an unclear image and possibly causing camera malfunction.
Voice memo( ) / UP button 3. Press the shutter button and take a picture. The picture is stored on the memory card. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo. INFORMATION A distance of 40cm between you and the camera (microphone) is the best distance to record sound.
Macro( ) / Down button (Focusing) Available focusing method, by recording mode( O : Selectable , X : Not selectable, : Infinity focus range) Mode Auto Macro Mode Auto Macro Focus lock To focus on the subject positioned outside of the center, use the focus lock function. Using the Focus Lock 1. Ensure the subject in the center of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto lights up, it means the camera is focused on the subject.
FLASH( ) / LEFT button When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button. Selecting the flash mode [ Selecting the Auto flash ] 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE CLIP and VOICE RECORDING modes. 2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor. 3.
FLASH ( ) / LEFT button Flash mode indicator Icon Flash mode Description Auto flash If the subject or background is dark, the camera flash will operate automatically. Auto & Red eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. Fill in flash The flash fires regardless of available light. The intensity of the flash will be controlled, according to the prevailing conditions.
Self-timer( ) / Remote ( )/ Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer ( ) and Remote ( ) button. This function is used when the photographer would also like to be in the image. Selecting the self-timer 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode. 2.
Self-timer( ) / Remote ( )/ Right button Using the remote controller. 1. Turn the mode dial to select shooting mode except the voice recording mode. 2. Press the self-timer ( ) button repeatedly until the remote controller icon ( displayed in the LCD. 3. Press the remote controller shutter button for a 2 seconds delayed shooting.
MENU/ OK button If the menu is displayed, use the 5-Function buttons to change the data values and for your changes to be accepted If the menu is not displayed, press the MENU/OK button to display a menu for the current camera mode on the LCD monitor. Press the button again to return to the previous state. Pressing the MENU button [ Menu off ] SIZE 3072X2304 2816X2112 2592X1944 2272X1704 2048X1536 3072 2816 2592 2272 2048 [ Menu on ] - There is no menu for VOICE RECORDING mode.
S button Main menu Sub menu RGB R(Red), G(Green), B(Blue) A/S/M mode A (Aperture priority mode) S (Shutter priority mode) M (Manual mode) LT Shutter speed, Aperture value (Changed by zoom scale) Available camera mode Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the S button. Compensating Exposure 1.
S button White balance : The white balance control allows you to adjust the colours to appear more natural looking. Selecting a White Balance 1. Press the S button, and then use the UP and DOWN buttons to select the white balance icon ( ). The white balance menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to set the white balance to the desired value. The value you set will be displayed on the LCD monitor.
S button ISO : You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. Selecting an ISO Sensitivity 1. Press the S button, and then use the UP and DOWN buttons to select the ISO icon ( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value. - AUTO : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
S button A/S/M : The user can manually set shutter speed or aperture value in the menu. Selecting the A/S/M shooting mode. 1. Turn the mode dial to select the ASM shooting mode. 2. Press the S button and use the Up and Down buttons to select the A/S/M shooting mode icon ( ASM ) to open the A/S/M shooting mode menu as shown in the picture. 3. Press the Left and Right buttons to select desired option for the A/S/M shooting mode and press the S button.
S button Long Time shutter : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. Adjusting the shutter speed and aperture values 1. Select the NIGHT SCENE mode by rotating the mode dial. 2. Press S button and Long Time shutter menu (LT, For selecting shutter speed and aperture value) will be displayed. 3.
MF button Use this button to select the focusing method. Repeatedly press the MF button to rotate [Manual focusing] [Continuous automatic focusing] [Automatic focusing]. Automatic focusing : Slightly press the shutter to let the camera measure distance to the object and select the best focusing. If successfully focused with the slight press of the shutter, the automatic focusing mark is turned green.
LCD button You can check the recording status in the LCD monitor. In any mode with the exception of VOICE RECORDING mode, pressing the LCD button will change the display as shown below. Pressing the LCD button [ Image & full information ] Pressing the LCD button [ Image & basic information ] [ LCD off ] Pressing the LCD button If the background image is too bright to view the menus, press the LCD button and the background image turn to black to view clear menus.
Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. INFORMATION The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. (when the green lamp next to the viewfinder blinks) - When there is no battery capacity.
Using the LCD monitor to adjust the camera settings Menu tab Main menu Sub menu Camera working mode Page MULTI METERING p.50 SPOT NORMAL B&W EFFECT SEPIA p.50 NEGATIVE SOFT SHARPNESS NORMAL p.51 VIVID SINGLE SHOOTING CONTINUOS p.51 AEB MYSET1 LOAD MYSET2 p.52 MYSET3 MYSET1 SAVE MYSET2 p.52 MYSET3 PORTRAIT CHILDREN LANDSCAPE CLOSE UP SUNSET DAWN BACKLIGHT FIREWORKS SCENE p.53 BEACH&SNOW TEXT * Menus are subject to change without prior notice.
How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT and RIGHT buttons to navigate through the menus. Press the LEFT or RIGHT button. 3072 QUALITY TIFF SUPER FINE FINE NORMAL TIFF Press the LEFT or RIGHT button. 3072 METERING MULTI SPOT 3072 EFFECT NORMAL B&W SEPIA NEGATIVE 3. Use the UP and DOWN buttons to select a sub menu. Press the UP or DOWN button.
Quality You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. 3072 QUALITY TIFF SUPER FINE FINE NORMAL TIFF [PROGRAM mode] STILL IMAGE mode Mode MOVIE CLIP mode Icon TIFF Sub menu TIFF S.FINE FINE NORMAL 30FPS 15FPS File Format tif jpeg jpeg jpeg mov mov INFORMATION TIFF is the highest quality and NORMAL is the lowest setting. Choose the setting appropriate for your needs.
Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. MULTI ( SPOT ( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. 3072 METERING MULTI SPOT ) : Only the rectangular area in the center of [ PROGRAM mode ] the LCD monitor will be metered for light.
Sharpness You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. SHARPNESS SOFT NORMAL VIVID [ PROGRAM mode ] Sub menu Icon SOFT NORMAL VIVID Description The edges of the image are softened. This effect is suitable for editing images on your PC. The edges of the image are sharp. This is suitable for printing.
Save / Load the camera configuration (MySET) Use the MySET mode to save frequently used camera settings (SAVE) and use it later (LOAD) Saving the camera configuration : Available in the PROGRAM, A/S/M and NIGHT SCENE shooting modes. 1. Use the camera buttons and menu to set desired camera configuration. 3072 SAVE MOVE: SET:OK 2. Press the menu button in any modes except AUTO, MYSET 1 VOICE RECORDING, MySET, MOVIE CLIP or SCENE MYSET 2 mode. MYSET 3 3.
Scene Select the [SCENE] submenu to automatically configure optimal settings, depending on the selected scene. Only available in the Scene Mode. 3072 SCENE PORTRAIT CHILDREN LANDSCAPE CLOSE UP SUNSET [ SCENE mode ] Sub menu Icon Description PORTRAIT To take picture of a person. CHILDREN Take a still picture of capturing moving children. LANDSCAPE CLOSE UP SUNSET DAWN Scenery with green woods or blue sky. Close-up shooting for small objects such as plants and insects. Splendor of the setting sun.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. You can turn the power on with the play mode button. The camera is turned on in play mode. Press the play mode button again to switch to the Recording mode.
Starting play mode Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip, the movie clip indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again.
LCD monitor indicator The LCD monitor displays information about the shooting conditions. No. Description Icon Page 1 Battery 2 Play mode 3 File Type 4 Voice memo p.58 5 Protect indicator p.65 6 DPOF indicator p.68 7 Stored image number p.15 10/10 If you press the LCD button, you can check the following recording information: SIZE AV TV ISO FLASH DATE 56 : : : : : : 3072X2304 F2.7 1/60 75 OFF 2004/09/01 SIZE AV TV ISO FLASH DATE : 3072X2304 Size : F2.
Using the camera buttons to adjust the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( ) / Enlargement ( ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail( ) / Enlargement( ) button The maximum enlargement rate in proportion to the image size. Image size 3072 2816 Maximum enlargement rate X12 X11 2592 9.00 2272 6.45 2048 5.33 1600 1024 5.00 4.00 640 3.33 Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the TRIMMING? enlargement button. TRIM : OK CANCEL : 2. Different parts of the image can be viewed by pressing the 5 function button. 3.
Voice ( ) memo / Up button 3. Press the shutter button to start recording and voice will be recorded to the still image for 10 seconds. While the voice is recording, the recording status window will be displayed as shown alongside. 4. The recording can be stopped by pressing the shutter button again. STOP.SHUTTER REC 5. The ( ) icon will be displayed on the LCD monitor after voice memo recording has finished. - Voice memos can’t be recorded onto movie clip files.
LEFT/ RIGHT/ MENU/ OK button LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an secondary menu. - MENU button : When you press the MENU button, the play mode menu will be displayed on the LCD monitor.
Delete( ) button This deletes images stored on the memory card. Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor. 3. Press the OK button to delete the image. DELETE? DEL. : OK CANCEL : INFORMATION Before deleting images from the camera, you should protect or download images to your computer that you wish to keep.
Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY button. The items indicated by are default settings. Menu tab Main menu DELETE Sub menu Secondary menu SELECT - ALL - Page p. 64 ONE PIC PROTECT SELECT UNLOCK / LOCK p.
Setting up the play back function using the LCD monitor Menu tab Main menu D P O F CANCEL SELECT Sub menu Secondary menu STANDARD - INDEX - PRINT SIZE - ONE PIC - ALL PICs - DEFAULT - Page p. 70 p. 72 AUTO PAPER SIZE POSTCARD, 4X6, L 2L, A4, A3 AUTO LAYOUT FULL INDEX 1, 2, 4, 9, 16 P C I U AUTO C S PLAIN T PAPER TYPE PRINTER T SETUP O FASTPHO. AUTO B M R I I Z D E PRINT QUALITY PHOTO p.
Deleting images Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. Deleting images 1. Press the play mode button and press the menu button. 2.
Protecting images This is used to protect specific shots from being accidentally erased (LOCK). It also unprotects images that have been previously protected (UNLOCK). Protecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [PROTECT] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [ONE PIC] : Only an image that is displayed on the LCD monitor is protected or unprotected.
Starting the slide show Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [SLIDE] menu tab. Setting play interval: Set the slide show play interval. 1. Use the Up/Down buttons to select the [INTERVAL] menu and press the Right button. 2. Use the Up/Down buttons to select the desired interval. 3.
Resize Change the resolution (size) of pictures taken. Select [LOGO] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Rotating an image You can rotate the stored images by 90, 180, or 270 degrees. You can view a picture in its proper orientation if the picture has been taken with the camera oriented vertically or up-sidedown. The rotated image can’t be enlarged or trimmed. 1. Press the play mode button and use the Left / Right buttons to select an image to rotate. ROTATE 2. Press the menu button and use the Left / Right buttons RIGHT(90 ) to select the [ROTATE] menu tap. LEFT(90 ) UPDOWN(180 ) 3.
DPOF : STANDARD This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [STANDARD] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [SELECT] : A window for selecting the image to be printed is opened.
DPOF : PRINT SIZE You can specify the print size when printing images stored on the memory card. The [PRINT SIZE] menu is available only for DPOF 1.1 compatible printers. Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [PRINT SIZE] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. TIFF, Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu. SELECT : Setting up the scope of PictBridge PRINTER SETUP : Setting up printing PRINT : Printing pictures DPOF PRINT : Printing the DPOF files RESET : Initializing the PictBridge functions Connecting the Camera to a Printer 1.
PictBridge: Picture Selection You can select the scope of the PictBridge function. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you PICTBRIDGE connect the camera to the printer.(See p.71) SELECT ONE PIC 2. The [PICTBRIDGE] menu will appear. PRINTER SETUP ALL PICs 3. Select the [SELECT] menu by pressing the UP/ DOWN PRINT DPOF PRINT button and press the RIGHT button. RESET 4. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
PictBridge: Print Setting You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you PICTBRIDGE connect the camera to the printer.(See p.71) SELECT 2. The [PICTBRIDGE] menu will appear. PRINTER SETUP 3. Select the [PRINTER SETUP] menu by pressing the UP/ PRINT DPOF PRINT DOWN button and press the RIGHT button. RESET 4.
PictBridge: Picture Printing Printing Pictures 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you PICTBRIDGE connect the camera to the printer.(See p.71) SELECT 2. The [PICTBRIDGE] menu will appear. PRINTER SETUP 3. Select the [PRINT] menu by pressing the UP/ DOWN PRINT DPOF PRINT button and press the RIGHT button. RESET 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
PictBridge : DPOF AUTO PRINT This allows you to directly print the files with DPOF information. For instructions on how to set up DPOF, refer to pages 69 to 70. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.71) 2. The [PICTBRIDGE] menu will appear. 3. Select the [DPOF PRINT] menu using the UP/DOWN button and press the RIGHT button. Next, select [YES] using the Up/Down button, and then press the OK button. 4.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu FILE PWR SAVE LANGUAGE FORMAT DATE. TIME IMPRINT LAMP SOUND 76 Sub menu Secondary menu RESET - SERIES - OFF, 01 ~ 03 ~ 10MIN ENGLISH FRENCH KOREAN A GERMAN B S.CHINESE T Y P E SPANISH T Y P E T.CHINESE RUSSIAN p.77 p.78 ENGLISH ITALIAN Page DANISH p.
Setup menu Menu tab Main menu LCD VIDEO Sub menu Secondary menu DARK - NORMAL - BRIGHT - NTSC - PAL - OFF - 1 ~ 5 SEC - COMPUTER - PRINTER - NO - YES - Q.VIEW USB RESET Page p.82 p.83 p.84 p.84 p.85 File name This function allows the user to select the file naming format. Assigning File Names 1. In any mode other than Voice Recording mode, press the MENU button. 3072 2. Press the LEFT/ RIGHT button and select the [SETUP] SET UP BACK: SET:OK RESET menu tab.
File name INFORMATION The first stored folder name is 100SSCAM, and the first file name is SA700001. Whenever you store an image, the file number is increased by 1. The file numbers are named from SA700001 to SA709999 automatically, 9999 files will be stored in a folder. The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 101SSCAM ~ 999SSCAM. The files used with the memory card conform to the DCF(Design rule for Camera File systems) format.
Language There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or AC adapter are removed and inserted again, the language setting will be preserved. Setting Language 1. In any mode other than Voice Recording mode, press the MENU button. 3072 SET UP BACK: SET:OK 2. Press the LEFT/ RIGHT button and select the [SETUP] ENGLISH FILE menu tab. PWR SAVE 3. Select the [LANGUAGE] menu by pressing the UP/ LANGUAGE FORMAT DOWN button and press the RIGHT button. DANSK DATE.
Setting up the Date/ Time/ Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting Date/Time & Selecting Date type 1. In any mode other than Voice Recording mode, press the MENU button. 3072 SET UP BACK: SET:OK 2. Press the LEFT/ RIGHT button and select the [SETUP] FILE menu tab. 04/ 09/ 01 PWR SAVE 3. Select the [DATE. TIME] menu by pressing the UP/ 00:00 LANGUAGE FORMAT DOWN button and press the RIGHT button. YY/MM/DD DATE.TIME 4.
Imprinting the recording date INFORMATION The Date & Time are imprinted at the bottom right side of the still image. The date will be imprinted as a DATE TYPE setting. TIME is imprinted in the following way : [Hour : Minute: Second] and hours are shown using the 24 hour clock. The imprint function is applied only to still images. Function lamp You can turn on and off the function lamp located on the front of the camera. Setting the function lamp 1.
Sound If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. Setting Operation Sounds 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Setting the Video Out Type 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [VIDEO] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. Setting Quick View 1. In any mode other than Voice Recording mode, press the MENU button. SET UP BACK: 2. Press the LEFT/ RIGHT button and select the [SETUP] LAMP menu tab. SOUND LCD 3. Select the [Q.VIEW] menu by pressing the UP/ DOWN VIDEO button and press the RIGHT button. Q.VIEW 4.
Initialization(RESET ALL) All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed. Initializing the Camera 1. In any mode other than Voice Recording mode, press the MENU button. SET UP 2. Press the LEFT/ RIGHT button and select the [SETUP] LCD menu tab. VIDEO 3. Select the [RESET] menu by pressing the UP/ DOWN Q.VIEW USB button and press the RIGHT button. RESET 4.
Setting up the MYCAM menu You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. The items indicated by are default settings. Menu tab Main menu Page Sub menu OFF IMAGE 1 IMAGE 2 IMAGE 3 OFF SOUND 1 SOUND 2 SOUND 3 OFF SH.SOUND 1 SH.SOUND 2 SH.SOUND 3 p.86 START IMAGE START SOUND p.87 p.87 SH.SOUND * Menus are subject to change without prior notice.
Start up sound You can select the sound that is activated whenever the camera is turned on. Setting the Startup Sound 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [MYCAM] menu tab. 3. Select the [START SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc.
Warning indicator There are several warnings that may appear on the LCD display Warning indicator Causes - Memory card error - Turn off the camera power and turn it on again - Insert the memory card again - Format the memory card (p.
Before contacting a service center Please check the following Symptom Causes - Insert fresh batteries The camera doesn t switch on - There is low battery capacity - An AC Power Adapter is not connected - Batteries are inserted incorrectly with the reverse polarities The camera power ceases whilst in use - The batteries are exhausted - The Camera is turned off automatically - The Adapter plug is not connected securely - Insert fresh batteries - Press the power button to reactivate camera - Remove and
Before contacting a service center Symptom Causes - If the subject is closer than 0.8m, select macro shot mode The images are unclear - A picture was taken within 0.
Before contacting a service center Symptom Causes Remedy Colour of image is different to the original scene - White balance setting is incorrect - Select appropriate White balance Images are too bright - Exposure is excessive - Reset exposure compensation - Check the connection cables No image on external monitor - The external monitor has not been connected properly with the camera - There are incorrect files in the memory card - Check the connection When using the PC’s explorer, the [Removabl
Specifications Type Image Sensor Effective Pixel Total Pixel Focal Length Lens F No. Digital Zoom Viewfinder Focusing Shutter Optical Viewfinder LCD Monitor Type Range Type Speed Control Exposure Flash Compensation ISO Equivalent Modes Range Recharging Time Sharpness Effect White Balance Voice Recording Date Imprinting Still Image Shooting Movie Clip Media Storage 94 File Format 1/1.8" CCD Approx. 7.0 Mega-pixel Approx. 7.4 Mega-pixel Schneider Lens f = 7.7 ~ 23.
Specifications Image Size Storage Capacity (32MB) Image Play Type Editing Interface Power Source Dimensions (WxHxD) Weight Operating Temperature Operating Humidity Camera Driver Software Application Special Features 3072 : 3072X2304 pixels, 2816 : 2816X2112 pixels, 2592 : 2592x1944 pixels, 2272 : 2272x1704 pixels, 2048 : 2048x1536 pixels, 1600 : 1600x1200 pixels, 1024 : 1024x768 pixels, 640 : 640x480 pixels 3072 : TIFF 1, S.Fine 8, Fine 16, Normal 24 2816 : TIFF 1, S.
Software Notes Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyrights for software are licensed only for use with a camera. In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window will automatically run. Before connecting the camera to the PC, you should first install the camera driver. Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. INFORMATION Close other programs before installing the application software. Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.
Setting up the application software 5. The Software License Agreement window will open, asking you to agree to the licensing. Use the button on the bottom left to select the language of your choice, and then click [Agree] to accept the license agreement. The installation will proceed to the next stage. If you do not agree to the license agreement, click [Disagree]. The installation will be canceled. If the language of your choice is not listed, please select [English]. 6.
Setting up the application software The QuickTime program folder will appear. 10. The QuickTime Settings - Introduction window appears. Click [Next >]. Click on the Close button to close the folder. [Click !] [Click !] 11. Set the transfer rate for downloading content from the Internet, and then click [Next >]. 12. Set up your browser for QuickTime plug-in. Click [Next >]. [Click !] 13. Specify the file types you want to associate with QuickTime. Click [Finish]. [Click !] 14.
Setting up the application software * The QuickTime Player will launch, the readme file will open, and the Step 15 window will open. Click on the Close 1 and Close 2 buttons to exit the program. [Close 1 button] [Close 2 button] 15. A window where you can choose the program you want to install will appear. Click [Install]. For information on application software, please refer to page 97. [Click !] If you select [Cancel] , the application program installation will be cancelled. 16.
Setting up the application software 18. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse..] and choose a folder you want. [Click!] 19. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >] button. If you want to add the program icons to a different folder, choose another folder, and then click [Next >] button. [Click!] 20. Digimax Viewer installation is successfully completed.
Setting up the application software 23. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation program will be canceled. [Click!] 24. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse...] and choose a folder you want. [Click!] 25. The [Select Components] window will appear. Click [Next >] button. [Click!] 26.
Setting up the application software 27. PhotoImpression Installation is completed. Click the [Finish] button and Digimax Reader installation will be started. The system will not reboot even if the [Yes, I want to restart the computer now] option is selected. *Frame 27 may not appear according to the system requirements. [Click!] 28. A window will be displayed as shown alongside. Click the [INSTALL] button. [Click!] - Check the [MANUAL] button. Instructions for using Digimax reader will be displayed.
Setting up the application software 32. Installation is complete. To apply changes, you must restart the computer. Select [Yes, I want to restart my computer now], and then click [OK]. [Click!] *Frame 32 may be displayed according the system requirements. Click the [Finish] button to restart the computer. [Click!] 33. After restarting the computer, connect the PC to the camera with the USB cable. 34. Turn the camera power on.
Setting up the application software INFORMATION If you have installed the camera driver, [Found New Hardware Wizard] may not open. On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. (for Windows 98 and 98 SE). When connecting the camera to your PC, it is recommended that you use an AC power adapter.
Starting PC Mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable. The LCD monitor is always turned off in PC mode. The auto focus lamp will blink when the files are transferring via the USB connection. Connecting the camera to a PC 1. Turn the PC power on. 2. Turn the camera power on. 3.
Starting PC Mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu.
Starting PC Mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.
Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Trace [Start Settings] and click [Control Panel]. 2. Double-click [Add/Remove programs]. 3. The [Add/Remove Programs Properties] window will open. Click [Digimax V70] and click the [Add/Remove] button. [Click !] 4. Uninstallation is complete. Click the [Finish] button and the window will disappear.
Removable Disk To use this camera as a Removable Disk, install (p.98) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM PC. 100SSCAM) can be transferred to the INFORMATION Important information whilst using the Removable Disk The [Removable Disk] indicator will not show when the camera power is off or the USB cable is removed.
Removing the removable disk Windows 98SE 1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have to wait until the lamp illuminates. 2. Unplug the USB cable. Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have to wait until the lamp illuminates. 2.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. [Click!] Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 9.0 ~ 10.3. 3.
Digimax Viewer 2.1 This software is only compatible with Windows. 1. To open Digimax Viewer, click the [Start Programs Samsung Digimax Viewer 2.1 Digimax Viewer 2.1 ] and Digimax Viewer 2.1 will then open. 2. If the [Auto Launch] option is selected, this program will be executed automatically with recognizing the camera. 3. You can easily use the Digimax viewer 2.1 program as it offers a FILE menu and TOOL bar.And, you can use the pop up menu. Click an image and press the right mouse button.
Using PhotoImpression With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. To start the program, click [Start Programs ArcSoft PhotoImpression PhotoImpression]. The following screen will appear. [ Help Button ] [ Command Button ] [ Tool Bar ] You can use PhotoImpression to perform the following tasks.
Using PhotoImpression Tool Bar Button Description Button Description Resize Layer Rotate Layer Flip Layer Horizontally Rotate All Layers Undo Redo Copy Paste Delete Layer Close Picture INFORMATION For detailed instructions on how to use PhotoImpression, please refer to the program's Help. Digimax Reader Digimax Reader is a Text recognition program. You can save an image file that is captured in the Text mode, as a text file with this program. This software is only compatible with Windows.
Digimax Reader How to use the Digimax Reader 1. Connect the camera and the PC with a USB cable and download the images that were stored in the camera to the PC. * Please see page 107 ~ 109 for details on Connecting a camera and PC, Downloading images. 2. Run the Digimax Reader. 3. Click the Open( ) icon as shown alongside. 4. Select the image you want to save as a text file. * Only an image that was taken with SAMSUNG camera can be opened. 5. Click the Area Analysis( image. ) icon to scan the 6.
Digimax Reader 8. To save the section as a text, click the Save( icon. A window as shown alongside will be displayed. ) 9. Select a file type that you want to. Selectable file type : *.TXT, *.HWP, *.DOC, *.RTF INFORMATION To get an image that can be recognized as a text : - Keep a distance of 20cm between the subject and the camera. - The subject need to be centered. - Avoid the camera shake to get a good image. Refer to the [Help] menu in Digimax Reader for further information.
FAQ [Case 6] How do I know my computer supports a USB Interface? Check the USB port in your computer or keyboard. Check the OS version. A USB Interface is available in Windows 98, 98SE, 2000, ME .XP. Check [Universal Serial Bus controllers] in Device Manager. Do the following to check [Universal Serial Bus controllers]. Win 98/ME : Trace [Start Settings Control Panel System Device Manager Universal Serial Bus controllers].
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5263/5264 FAX : (1) 310-537-1566 www.