user manual
Table Of Contents
- LCD Display
- Safety Instructions
- Introduction
- Connections
- Using the Software
- Adjusting the LCD Display
- Input
- Picture [PC / DVI / DisplayPort / MagicInfo Mode]
- Picture [ AV / HDMI / Component / TV Mode]
- Sound
- Setup
- Multi Control
- MagicInfo
- Troubleshooting
- Specifications
- Information
- Appendix
Video Wall
A Video Wall is a set of video screens connected together, so that each screen shows a part of the
whole picture or where the same picture is repeated on each screen.
When the Video Wall is on, you can adjust the Video Wall screen setting.
Note
• When a Horizontal or Vertical split is over four, use a resolution of XGA (1024 x 768) or greater
to prevent any picture degradation.
• Size will be disabled when Video Wall is running.
• Disabled when PIP is set to On.
Video Wall
Turns Off/On the Video Wall function of the selected display Off/On.
• Off
• On
Format
The Format can be selected to see a divided screen.
• Full
Provides a full screen without any margins.
• Natural
Displays a natural image with the original aspect ratio intact.
Adjusting the LCD Display