user manual
Table Of Contents
- LCD Display
- Safety Instructions
- Introduction
- Connections
- Using the Software
- Adjusting the LCD Display
- Input
- Picture [PC / DVI / DisplayPort / MagicInfo Mode]
- Picture [ AV / HDMI / Component / TV Mode]
- Sound
- Setup
- Multi Control
- MagicInfo
- Troubleshooting
- Specifications
- Information
- Appendix
Fan Control (UD46A model Only)
Selects auto or manual for the fan speed settings.
• Auto
• Manual
Fan Speed Setting(UD46A model Only)
Sets the fan speed within a range of 0 and 100.
Note
Enabled when Fan Control is set to Manual.
Temperature Control
Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77°C by default.
Note
• The picture will be dimmed if the temperature exceeds the specified temperature, and the product
will automatically power off to prevent overheating if the temperature keeps rising.
• It is best to use the product at temperatures 75 - 80°C (based on ambient temperature of 40°C).
Refer to "Specifications" herein for details about operating conditions.
• It is best to set Fan Control to Auto when you change the Temperature Control setting.
Adjusting the LCD Display