user manual
Table Of Contents
- LCD Display
- Safety Instructions
- Introduction
- Connections
- Using the Software
- Adjusting the LCD Display
- Input
- Picture [PC / DVI / DisplayPort / MagicInfo Mode]
- Picture [ AV / HDMI / Component / TV Mode]
- Sound
- Setup
- Multi Control
- MagicInfo
- Troubleshooting
- Specifications
- Information
- Appendix
Note
• This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The input
resolution must be identical to the panel resolution.)
• In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported
if the Edit Name is set to PC or DVI PC.
• This is only supported if the Size is set to 16:9.
Setup Reset
Reset all the values for a setting.
Reset All
Reset all the settings for the display.
Multi Control
Available Modes
•
PC / DVI / DisplayPort
•
AV
•
Component
•
HDMI
•
MagicInfo
•
TV
Adjusting the LCD Display