user manual
Table Of Contents
- LCD Display
- Safety Instructions
- Introduction
- Connections
- Using the Software
- Adjusting the LCD Display
- Input
- Picture [PC / DVI / DisplayPort / MagicInfo Mode]
- Picture [ AV / HDMI / Component / TV Mode]
- Sound
- Setup
- Multi Control
- MagicInfo
- Troubleshooting
- Specifications
- Information
- Appendix
It is highly recommended not to turn off the AC power during an operation.
• For pivoted LCD Displays, ticker transparency is not supported.
• For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies.
• For drive D, EWF is not applied.
• To save Setup contents that have been changed when EWF is in the Enable state, you must
Commit them.
• By selecting Disable, Enable or Commit, the system is restarted.
MagicInfo
1. Select Application - step 1
You can select an Application to be executed in your computer when Windows starts.
2. Select TCP/IP - step 2
In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop to
make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation.
3. Select TCP/IP - step 2
Adjusting the LCD Display