user manual
Table Of Contents
- LCD Display
- Safety Instructions
- Introduction
- Connections
- Using the Software
- Adjusting the LCD Display
- Input
- Picture [PC / DVI / DisplayPort / MagicInfo Mode]
- Picture [ AV / HDMI / Component / TV Mode]
- Sound
- Setup
- Multi Control
- MagicInfo
- Troubleshooting
- Specifications
- Information
- Appendix

DVI IN (PC Video Connection Terminal)
Connect the [DVI IN] port
on the monitor to the
DVI port on the PC using the DVI cable.
RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/
DP/HDMI Audio Connection Terminal (Input))
Connect the [RGB/DVI/DP/HDMI AUDIO
IN]
terminal of the monitor and the speaker output
terminal of your computer's sound card using a
stereo cable (sold separately).
DP IN
AV/COMPONENT AUDIO IN [R-AUDIO-L]
Connect
the [AV/COMPONENT AUDIO IN [R-
AUDIO-L]] port on the monitor to the audio
output port on the PC or on the external device
using an audio cable.
AV IN
Connect the [AV IN] terminal of your
monitor to
the video output terminal of the external device
using a VIDEO cable.
AUDIO OUT
Connect a headphone or an External speaker.
DC OUT
Make sure to use
connecting [DC OUT] terminal
to the authorized TV-Tuner Box. (US Only)
Otherwise, this may result in damage to
the product.
HDMI IN 1
• Connect the [HDMI IN 1] terminal at the back
of your LCD Display to the HDMI terminal
of your digital output device using a HDMI
cable.
• Up to HDMI 1.3 can be supported.
Introduction
Connect the [DP IN] port on the LCD Display to the
DP port on the PC using the DP cable.
Receives a signal from the Display port.










