User Manual DB32E DB40E DB48E DB55E DM32E DM40E DM48E DM55E DM65E DM75E DH40E DH48E DH55E The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Recommended hours of use per day for the DBE models is less than 16 hours. If the product is used for longer than 16 hours a day, the warranty may be void.
Table of contents Before Using the Product Copyright 7 Safety Precautions Symbols Cleaning Storage Electricity and Safety Installation Operation 8 8 8 9 9 10 12 Installing the Wall Mount Preparing before installing Wall-Mount Installing the Wall Mount Kit Wall Mount Kit Specifications (VESA) 29 29 29 30 Remote Control (RS232C) Cable Connection Connection Control Codes 31 31 34 35 Connecting and Using a Source Device Preparations Checking the Components Components 16 16 Parts Control Panel Reverse
Table of contents Schedule Available features in the Schedule page 75 75 Template 77 Clone Product 80 ID Settings Device ID PC Connection Cable Device ID Auto Set 81 81 81 81 Video Wall Apply to Video Wall 82 82 83 Network Status 84 Picture Mode 85 On/Off Timer On Timer Off Timer Holiday Management 86 86 87 87 Ticker 88 More settings 88 URL Launcher 89 Screen Adjustment Picture Mode 90 Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) 91 Color Temperature 92 Whit
Table of contents Sound Adjustment Sound Mode 114 Sound Effect Virtual Surround Dialog Clarity Equalizer 115 115 115 115 HDMI Sound 116 Sound on Video Call 116 Dolby Digital Comp 117 Speaker Settings Sound Output 117 117 Auto Volume 118 Reset Sound 118 Broadcasting Auto Program 119 Antenna 120 Channel List Added Ch.
Table of contents Network Standby 151 Eco Solution Energy Saving Eco Sensor Screen Lamp Schedule No Signal Power Off Auto Power Off 152 152 152 152 153 153 Temperature Control 153 Device Manager Keyboard Settings Mouse Settings Pointer Settings 154 154 155 156 Play via 157 Change PIN 157 Security Safety Lock Button Lock USB Auto Play Lock Mobile Connection Lock 158 158 158 159 159 General Smart Security BD Wise Anynet+ (HDMI-CEC) Troubleshooting for Anynet+ HDMI Hot Plug DivX® Video On Demand
Table of contents Specifications General 194 Preset Timing Modes 197 Appendix Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others 199 199 199 199 Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality Prevention of Afterimage Burn-in 200 200 200 License 202 Terminology 203 6
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Safety Precautions Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Caution ――Take the following steps when cleaning. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecolored stains on the product. ――Contact Customer Service Center if the inside of the product needs cleaning (service fee will be •• An electric shock or injury may result. ! Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. charged).
Installation Caution Do not disconnect the power cord while the product is being used. •• The product may become damaged by an electric shock. Warning DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. •• A fire or electric shock may result. Have a technician install the wall-mount hanger.
Bend and keep part of the outdoor TV antenna cable hanging downwards (the part inside the room) to prevent rainwater from entering the product. Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter. •• If rainwater enters the product, a fire or electric shock can occur. ! When using an outdoor antenna, be sure to install the antenna away from nearby power lines to prevent the antenna from collapsing onto them in strong winds.
Operation Caution Do not drop the product while moving. •• Product failure or personal injury may result. Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ! •• A fire or electric shock may result. Do not set down the product on its front. •• Contact Samsung Customer Service Center for repairs. •• The screen may become damaged.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product. Do not use or keep combustible spray or an inflammable substance near the product. •• The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. •• An explosion or fire may result. ! During a lightning or thunderstorm, remove the power cable and do not touch the antenna cable. Ensure the vents are not blocked by tablecloths or curtains.
Caution Rest your eyes for more than 5 minutes for every 1 hour of product use. •• Eye fatigue will be relieved. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. •• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. •• If children have had the battery in their mouths, consult your doctor immediately. When replacing the battery, insert it with the right polarity (+, -). •• Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid.
Chapter 02 Preparations Checking the Components Components ――Components may differ in different locations. -- Contact the vendor where you purchased the product if any components are missing. Warranty card Quick Setup Guide Regulatory guide Power cord Remote Control D-SUB cable RS232C(IN) adapter COVER-JACK Screw (M3L8, 1EA) (M4L8, 4EA) Holder-Ring (4EA) (The DM65E and DM75E models are not supported.) (The DM65E and DM75E models are not supported.) (DM65E, DM75E models are only supported.
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve Parts quality. Panel Key Control Panel Buttons Description Power on the product. If you press the button when the product is turned on, the control menu will be displayed. ――To exit the OSD menu, press and hold the panel key for at least one second. Panel Key Move to the upper or lower menu. You can also adjust the value of an option. ――Change the channel in TV mode.
――If you press the button on the panel key when the product is turned on, the control menu will be displayed. Buttons Description Select the connected input source. Control menu Source Move the panel key right to select Source in the control menu. When the list of input sources is displayed, move the panel key left or right to select the desired input source. Next, press the panel key. Display the OSD menu. Menu Home Move the panel key left to select Menu in the control menu.
Reverse Side Port ――The color and shape of parts may differ from what is shown. Specifications are RS232C IN subject to change without notice to improve quality. ――Models DB32E, DB40E, DB48E, DB55E and DM32E are only supported. RS232C OUT RS232C IN RS232C OUT RGB / DVI / HDMI / AV / COMPONENT AUDIO IN AUDIO OUT SD CARD Description Connects to MDC using an RS232C adapter. RGB / DVI / HDMI / AV / COMPONENT AUDIO IN Receives sound from a PC via an audio cable.
Reverse Side Port ――The color and shape of parts may differ from what is shown. Specifications are RS232C IN subject to change without notice to improve quality. ――Models DM40E, DM48E, DM55E, DM65E, DM75E, DH40E, DH48E and DH55E are RS232C OUT only supported. RS232C IN Description Connects to MDC using an RS232C adapter. IR / AMBIENT SENSOR IN Supplies power to the external sensor board or receives the light sensor signal.
Plug In Module (Sold separately) Anti-theft Lock ――An anti-theft lock allows you to use the product securely even in public places. PIM Slot ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. ――The following images are for reference only. Real-life situations may differ from what is shown in the images.
Spacer logo Do not pull on the spacer logo using force. The logo may tear or break off.
Remote Control ――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ――A button without a description in the image below is not supported on the product. POWER OFF Power on the product. .QZ ABC DEF GHI JKL MNO PRS TUV WXY DEL-/-- SYMBOL 1 4 Press to select additional channels (digital) being broadcasted by the same station.
Quickly select frequently used functions. TOOLS INFO Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Return to the previous menu. It sets safe lock function. If multiple products are connected through the Video Wall feature, press the SET button and enter a product ID using the number buttons. Control the product using the remote control.
Connection Using an IR Stereo Cable (sold separately) 1 2 ――The DBE and DM32E models do not support the IR OUT port. Make sure to connect the External ambient sensor while the product is powered off. Then, power on the product. IR OUT IR / AMBIENT SENSOR IN Controlling more than one display product using your remote control •• Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN port on the other display product using the dedicated stereo cable.
Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. •• Ensure that an authorized installation company installs the wall mount. •• Otherwise, it may fall and cause personal injury. •• Make sure to install the specified wall mount. Tilting Angle and Rotation 15 ˚ ――Contact Samsung Customer Service Center for further details.
Figure 1.3 Side view Installation on an Indented Wall ――Contact Samsung Customer Service Center for further details. B D D Plane view A Minimum 40 mm B Minimum 70 mm A C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ――When installing the product on an indented wall, allow at least the space specified above between the product and wall for C ventilation and ensure that the ambient temperature is kept below 35 C. E Figure 1.
Using the COVER-JACK ――The DM65E and DM75E models are not supported. To prevent theft of the SD memory card or any other USB device, install the COVER-JACK. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. DB40E / DB48E / DB55E / DM40E / DM48E / DM55E / DH40E / DH48E / DH55E ――When using a DVI cable, make sure to cut off the side of the COVER-JACK first. ――Cut out the Cover-Jack according to the DVI cable size before use.
Installing the Wall Mount Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring(1). ――DM65E, DM75E models are only supported. Installing the Wall Mount Kit 1 The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket.
Wall Mount Kit Specifications (VESA) ――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury. •• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Remote Control (RS232C) •• Pin assignment 1 2 3 4 5 Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.
LAN Cable •• RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 9 •• Pin assignment 3 2 1 5 1 2 3 4 5 6 7 8 -P2- 6 -P1- 1 -P1Female -P1- -P2- -P2- Rx 2 --------> 3 Tx STEREO Tx 3 <-------- 2 Rx PLUG Gnd 5 ---------- 5 Gnd (3.
Cross LAN cable (PC to PC) •• Connector : RJ45 Direct LAN cable (PC to HUB) HUB RJ45 P2 RJ45 P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ P1 P1 P2 RJ45 MDC P2 Signal TX- 2 <--------> 6 RX- <--------> 1 TX+ RX+ 3 <--------> 1 TX+ 2 <--------> 2 TX- RX- 6 <--------> 2 TX- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Signal P1 TX+ 1 TX- 33
Connection •• Connection 2 ――Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product.
No. Control Codes Viewing control state (Get control command) Header Command 0xAA Command type ID Data length Command 0xAA Command type Command type 10 Video Wall On 0x84 0~1 11 Video Wall User Control 0x89 - E.g. Power On & ID=0 Data length Data 1 Value Checksum Command No. Value range •• All communications take place in hexadecimals. The checksum is calculated by adding up all values except the header.
Power control Volume control •• Function A product can be powered on and off using a PC. •• Function The volume of a product can be adjusted using a PC.
Input source control 0x24 HDMI2_PC •• Function The input source of a product can be changed using a PC. 0x25 DisplayPort ――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to •• Viewing input source state (Get Input Source Status) Header Command 0xAA 0x14 ID Data length "Get" commands. ――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports. Checksum ――MagicInfo is only available with models that contain the MagicInfo function.
Screen mode control •• Nak •• Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. ――This control can only be used on models that include a TV.
PIP On/Off control Auto adjustment control (PC and BNC only) •• Function The PIP mode of a product can be turned on or off using a PC. •• Function Automatically adjust the PC system screen using a PC. ――Only available on models that have the PIP function. ――The mode cannot be controlled if Video Wall is set to On. •• Viewing auto adjustment state (Get Auto Adjustment Status) None ――This function is not available in MagicInfo.
Video Wall Mode Control Safety Lock •• Function Video Wall mode can be activated on a product using a PC. •• Function PC can be used to turn the Safety Lock function on or off on a product. This control is only available on a product whose Video Wall is enabled. This control is available regardless of whether or not the power is turned on.
Video Wall On •• Nak •• Function Turn Video Wall on or off on the product from your computer. Header Command 0xAA 0xFF ID Data length Ack/Nak r-CMD Val1 3 'N' 0x84 ERR Checksum •• Get Video Wall On/Off Status Header Command 0xAA 0x84 ID Data length "ERR": A code showing what error has occurred Checksum Video Wall User Control 0 •• Function Turn the Video Wall function on or off on the product from your computer.
10x10 Video Wall Model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Off 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F 4 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0
Wall_SNo: Product Number code assigned to the product 10x10 Video Wall Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ...
Chapter 03 Connecting and Using a Source Device Before Connecting Pre-connection Checkpoints ――Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. ――Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. ――Connect the sound ports correctly: left = white and right = red.
Connection using a DVI cable (Digital type) Connection Using an HDMI-DVI Cable After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings as shown below to enable the video and audio from the computer.
Connection Using an HDMI Cable Connection Using an DP Cable HDMI IN DP IN •• Precautions for using DP ――To increase the standby power capacity, the product stops DP communication when it is turned off or in power-saving mode. If the product in dual monitor mode is turned off or goes into power-saving mode, monitor setting changes may not be updated. As a result, screen output may not be displayed properly. In the occurrence of this issue, set Max. Power Saving to Off before using the product.
Connecting an External Monitor •• Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. ――Connecting parts may differ in different products. ――The DP OUT port is only available when the input source is PC, DVI, HDMI (PC connection), DisplayPort, MagicInfo or MagicInfo S. ――When you play content using Player (MagicInfo S) on the home screen, Loopout is supported only for images. It is not supported for voice.
Connecting to a Video Device •• Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •• You can connect a video device to the product using a cable. ――Connecting parts may differ in different products. ――Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable ――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. ――After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the settings as shown below to enable the video and audio from the video device. You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
Connection Using an HDMI Cable Connecting to an Audio System Using an HDMI cable or HDMI to DVI Cable (up to 1080p) ――Connecting parts may differ in different products. •• For better picture and audio quality, connect to a digital device using an HDMI cable. •• An HDMI cable supports digital video and audio signals, and does not require an audio cable. -- To connect the product to a digital device that does not support HDMI output, use an HDMIDVI and audio cables.
Connecting the antenna Connecting the LAN Cable ――Connecting parts may differ in different products. ――Connecting parts may differ in different products. ――When the product is powered on for the first time, basic settings are configured automatically. Take extra care to ensure the wires inside the antenna cable are not bent. RJ45 ANT IN •• Use Cat7(*STP Type) cable for the connection.
Changing the Input source Source allows you to select a variety of sources and change source device names. Source ――The screen may not display correctly if an incorrect source is selected for the source device you want to convert to. You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source. ――The input source can also be changed by using the SOURCE button on the remote control.
Chapter 04 Using MDC Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. - For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website. MDC Program Installation/Uninstallation Installation ――MDC installation can be affected by the graphics card, mother board and network conditions. 1 Click the MDC Unified installation program.
Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable. Connection using a direct LAN cable ――Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
Connection using a cross LAN cable ――Multiple products can be connected using the RS232C IN / OUT port on the product.
Chapter 05 Home feature This feature is provided in Support → Go to Home. Accessible using the HOME button on the remote control. ――To use the Player feature, set Play via to MagicInfo in System. Player HOME Play a range of content such as channels with schedules assigned, templates or files. Play channels or content using any of the following methods. → Player →ENTER E •• Network Channel: Play content using the server. ――To run Network Channel, make sure the product is connected to the server.
Approving a connected device from the server 3 Select Device from the top menu bar. 4 Select Lite from the menus on the left. 5 Select Unapproved from the sub-menus of Lite. 6 Select the Approve button for your device from the list of unapproved Lite devices. Approving the Lite server •• Set MagicInfo Mode to Lite in Server Network Settings. Approve and use the Lite server now. ――First configure the server Network Settings before device approval.
7 Enter the information required to approve the device. 9 When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. ――For further details on how to configure a schedule, refer to the . ――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its settings.
Approving the Premium server 3 Select Device from the top menu bar. 4 Select Premium from the menus on the left. 5 Select Unapproved from the sub-menus of Premium. 6 Select the Approve button for your device from the list of unapproved Premium devices. •• Set MagicInfo Mode to Premium in Server Network Settings. Approve and use the Premium server now. ――First configure the server Network Settings before device approval. 1 2 Access the server you have assigned to your device.
7 Enter the information required to approve the device. 9 When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. ――For further details on how to configure a schedule, refer to the . ――If a device is deleted from the list of devices approved by the server, the device will reboot to reset its settings.
Device : All Player Content : All Sort By : File Name Browse and play content stored in the selected device. No channel. Network Channel My Templates Options 1 / 4 item(s) Network Channel Play content, templates and schedules configured on the server. •• You can view whether the server is connected (approval) in the Player menu screen. To view whether the server is connected when a Network Channel is running, press INFO on the remote. 1 No channel. Select Network Channel from the Player menu.
Available features in the Player page The Player list page provides the following features. •• Device Select either Internal or USB to search for a desired device list. -- All / Internal / USB •• Content Select a content type as criterion to search for a desired content list. -- All / Video / Image / PDF / Flash / Office / My Templates •• Sort By Specify the content sort criterion.
Player page Settings menu Default Storage Select the storage location that you want to download scheduled channels from the network to. Settings •• Internal / USB / SD Card Picture size Settings Set the screen size for content. Select the storage location that you want to download scheduled channels from the network to.
Default Content This default content will be displayed if you run a channel while no programs are scheduled on the channel. •• None Safely Remove Safely removes USB memory Reset Restore all the values under Settings to the default when the product was purchased.
When Content is Running Press the INFO button on the remote control. •• Current Time Viewing the details of the content that is running •• CH Number: Number assigned to the channel currently playing ――Only applicable during Network Channel / Local Channel playback. Information Current Time Type: •• CH Name: Name of the channel currently playing ――Only applicable during Network Channel / Local Channel playback.
Changing the settings for the content that is running Press the TOOLS button on the remote control during content playback to configure settings such as Picture Mode and Sound Mode. •• Playlist View a list of content items currently playing. •• Music Set the background music for the content currently playing.
File Formats Compatible with Player •• Supported file systems include FAT32 and NTFS. •• A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played. Check the vertical and horizontal resolution of the file. •• Check the supported video and audio Codec types and Versions. •• Check the supported file versions. -- Flash player 11.0 and older and Flash Air 3.0 and older versions are supported.
Contents File Extension Container *.avi AVI *.mkv MKV *.asf ASF *.wmv MP4 *.mp4 3GP *.mov VRO *.3gp VOB *.vro PS *.mpg TS Video Codec DivX 3.11 / 4.x / 5.x / 6.x Resolution 1920 x 1080 Frame rate (fps) 6~30 Bit rate (Mbps) 30 Audio Codec AC3 LPCM AAC MPEG4 SP / ASP HE-AAC WMA H.264 BP / MP / HP DD+ MPEG(MP3) DTS Core Motion JPEG G.711(ALaw,μ-Law) *.mpeg *.ts Window Media Video v9 *.tp *.trp MPEG2 *.flv *.vob *.svi MPEG1 *.m2ts *.mts VP6 640 x 480 4 *.
Video •• 3D video is not supported. •• Content with a resolution larger than the resolution specified in the table above is not supported. •• Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback. •• Video content will not play, or not play correctly, if there is an error in the content or the container. •• Some USB/digital camera devices may not be compatible with the player.
Flash Power Point •• Flash player 11.0 and older and Flash Air 3.0 and older versions are supported. •• Flash Animation -- Compatible file format : SWF •• Recommended resolution : 1280 x 720 -- Caution Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation •• Flash Video -- Compatible file format : FLV -- Video Codec : H.264 BP Resolution : 1920 x 1080 -- Audio Codec : H.
WORD Template files •• Compatible document file formats -- Extension : .doc, .docx -- Version : Office 97 ~ Office 2007 •• Functions not supported -- Page background effect -- Some paragraph styles -- Word Art -- Align A group alignment error may occur •• Creation/editing/playback are only available in Template. LFD •• Supported in Network Channel and Local Channel •• Compatible document file formats -- Extension : .
File Formats Compatible with Video Wall ――Refer to the for further details. Video Image •• 3D video is not supported. •• Compatible image file format : Jpeg, bmp, png •• Content with a resolution larger than the resolution specified in the table above is not supported. •• Supported maximum resolution : 15,360 x 8,640 ――A higher resolution image may take longer to display on the screen.
Restrictions •• Only one video (Video) file can be played per client. ――Different content files can be played on the displays of a video wall. Two video (Video) files cannot be played on a single display of a video wall.
Schedule Available features in the Schedule page The Schedule page provides the following features. → Schedule → ENTER E HOME Schedule Type : Local Device : Internal Options Schedule your content on a local channel or edit existing channels. Playing Time [CH1]Channel 1 [CH2]Channel 2 [CH3]Channel 3 12:00 am 12:30 am Add content to create a program on the channel.
Configuring channel schedules Play media content such as videos, photos and music at a desired time. 1 Select a channel to configure. 2 Select video, music and photo content you want to apply to the channel schedule. 3 Set the time to play the schedule. (Start Time ~ Stop Time) 4 Change the channel schedule name, and then select a destination folder to save to. 5 Press the Save button. ――Only applicable when Type is set to Local. Editing a channel schedule.
Template HOME Available features in the Template page Create unique content using templates. It is easy to create content. Simply change images and text in a template. → Template → ENTER E Template Sort the template list using the following criteria. Market : All Select a template to customize. My Templates Orientation : Landscape 1 / 64 item(s) •• Market •• Orientation -- Landscape: Select this mode when using the product in landscape orientation.
Entering text Inserting content such as videos, photos and PDF files Aa Create Template Select in the editable zone to add content or edit the existing text. Create Template Press the volume button on the remote to change the font size. Select in the editable zone to add content or edit the existing text. Edit Item(s) selected Select to delete Preview Cancel picture1.jpg New town interior design Edit Text Font option Save Sustainble evolution unfolods tomorrw’s design Background Screen bg_co.
3 Preview Configure Template Name and Storage. Save Duration 23:59:59 Template Name Template preview is running. It will disappear after 20 seconds. Storage 1 Preview the created template using the Preview feature. 2 To save the template, press the Save button. Internal Save New town interior design Sustainble evolution unfolods tomorrw’s design Template01 4 Cancel Press the Save button to finish creating the content.
Clone Product HOME → Clone Product → ENTER E Clone Product Export settings on the product to an external storage device. You can also import settings from an external storage device. This option is useful when assigning the same settings to several products. When a duplicate file is not found on the external storage device 1 Connect the external storage device, then run the Clone Product function. 2 The No cloning file found on the external storage device.
ID Settings HOME → ID Settings → ENTER E Assign an ID to a set. Device ID Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224) ――Press u/d to select a number, and press E. ID Settings ――Enter the number you want using the number buttons on the remote control. PC Connection Cable -- The displayed image may differ depending on the model. Select a method to connect to MDC to receive the MDC signal.
Video Wall HOME → Video Wall → ENTER E Video Wall -- The displayed image may differ depending on the model. Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function. Apply to ――The DBE and DM32E models are not supported.
Video Wall You can activate or deactivate Video Wall. To organize a video wall, select On. •• Off / On Horizontal x Vertical This feature automatically splits a videowall display based on a videowall matrix configuration. Enter the videowall matrix. The videowall display is split based on the configured matrix. The number of vertical or horizontal display devices can be set within the range 1 and 15. ――A videowall display can be split into a maximum of 225 screens.
Network Status HOME Check the current network and Internet connection. → Network Status → ENTER E Network Status -- The displayed image may differ depending on the model.
Picture Mode HOME → Picture Mode → ENTER E Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the computer. •• Shop & Mall Suitable for shopping malls. -- Select either Video/Image or Text depending on the picture mode. Picture Mode •• Office & School Suitable for offices and schools.
On/Off Timer HOME → On/Off Timer → ENTER E ――You must set Clock Set before you can use this feature. On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. The power is turned on with the specified volume or input source. On/Off Timer On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first. (On Timer 1 ~ On Timer 7) -- The displayed image may differ depending on the model.
Off Timer Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7) •• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product. -- The check mark indicates days you’ve selected. •• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left and right arrow buttons to change entry fields.
Ticker HOME → Ticker → ENTER E Input text while a video or image is displayed and display the text on the screen. •• Off / On •• Message: Enter a message to display on the screen. •• Time: Set the Start Time and End Time to display a Message. •• Font Options: Specify the text font and color for the message. Ticker •• Position: Select an orientation to display a Message. •• Scroll: Specify the scroll Direction and Speed for the message. •• Preview: Preview configured caption settings.
URL Launcher HOME For details on how to use the URL Launcher feature, contact the dealer the product was purchased from. ――To use the URL Launcher feature, set Play via to URL Launcher in System. → URL Launcher → ENTER E Change URL pm 12:00 URL Launcher January 1 2015 Clone Product ID Settings Video Wall Network Status Picture Mode On/Off Timer Ticker More settings -- The displayed image may differ depending on the model.
Chapter 06 Screen Adjustment Configure the Picture settings (Backlight, Color Tone, etc.). The layout of the Picture menu options may vary depending on the product. Picture Mode Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the computer. •• Shop & Mall Suitable for shopping malls.
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) MENU m → Picture → ENTER E Picture Picture Mode Shop & Mall · Backlight 80 · Contrast 100 · Brightness 45 · Sharpness 60 · Color 55 · Tint (G/R) G50 Your product has several options for adjusting picture quality.
Color Temperature Adjust the color temperature (Red / Green / Blue). (Range: 2800K–16000K) ――Enabled when Color Tone is set to Off. MENU m → Picture → Color Temperature → ENTER E ――Color Temperature is disabled if Picture Mode is set to Calibration or BD Wise. Picture Color Temperature 16000K -- The displayed image may differ depending on the model.
White Balance 2 Point Adjust the color temperature for a more natural picture. MENU m → Picture → White Balance → ENTER E Picture White Balance •• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness. •• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness. •• Reset: Suitable for environments where videowall display are used. 10 Point Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
Gamma Adjust the primary color intensity. ――If Picture Mode is set to Calibration, Gamma is disabled. MENU m → Picture → Gamma → ENTER E Picture Gamma 0 -- The displayed image may differ depending on the model. Calibrated Value Select whether to apply the brightness, color, gamma and uniformity settings customized using the color calibration program Advanced Color Management to the Information and Advertisement modes.
Advanced Settings Picture Mode MENU m → Picture → Advanced Settings → ENTER E Advanced Settings Dynamic Contrast Terminal & Station Adjustable options Video/Image Dynamic Contrast / Black Tone / Flesh Tone / RGB Only Mode / Color Space Text Dynamic Contrast / Black Tone Video/Image Dynamic Contrast / Black Tone / Flesh Tone / RGB Only Mode / Color Space / Motion Lighting Text Dynamic Contrast / Black Tone High Black Tone Darkest Flesh Tone 0 RGB Only Mode Color Space Shop & Mall, Office
Dynamic Contrast Advanced Settings Dynamic Contrast High Black Tone Darkest Flesh Tone 0 RGB Only Mode Color Space Off Native Motion Lighting Off Adjust the screen contrast. •• Off / Low / Medium / High Black Tone Select the black level to adjust the screen depth. •• Off / Dark / Darker / Darkest Flesh Tone Emphasize pink Flesh Tone. RGB Only Mode -- The displayed image may differ depending on the model.
Picture Options Picture Mode MENU m → Picture → Picture Options → ENTER E Shop & Mall, Office & School, Terminal & Station, Video Wall Picture Options Picture Mode settings Adjustable options Video/Image Color Tone / Digital Clean View / MPEG Noise Filter / HDMI Black Level / Film Mode / Auto Motion Plus / Dynamic Backlight Text Color Tone / HDMI Black Level / Dynamic Backlight Color Tone Off Calibration HDMI Black Level / Dynamic Backlight Digital Clean View Off BD Wise MPEG Noise Filter
Color Tone Picture Options If Picture Mode is set to Text Color Tone Off Digital Clean View Off If Picture Mode is set to Video/Image or BD Wise MPEG Noise Filter Off •• Off / Cool / Standard / Warm1 / Warm2 ――If Picture Mode is set to Calibration, Color Tone is disabled. HDMI Black Level Low Film Mode Off Auto Motion Plus Off Dynamic Backlight Off -- The displayed image may differ depending on the model.
HDMI Black Level Picture Options Color Tone Off Digital Clean View Off MPEG Noise Filter Off HDMI Black Level Low Film Mode Off Auto Motion Plus Off Dynamic Backlight Off Selects the black level on the screen to adjust the screen depth. •• Auto / Low / Normal ――Available only in HDMI, DVI and DisplayPort mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p). ――The DBE and DM32E models do not support DisplayPort mode. Film Mode This mode is suitable to view movies.
Auto Motion Plus Picture Options Color Tone Off Digital Clean View Off MPEG Noise Filter Off HDMI Black Level Low Film Mode Off Auto Motion Plus Off Dynamic Backlight Off -- The displayed image may differ depending on the model. -- Auto Motion Plus is only available on the DM65E, DM75E models. ――Models DM65E and DM75E are only supported. Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture. The menu names may vary depending on the country.
Picture Size Choose size and aspect ratio picture displayed on screen. Picture Size MENU m → Picture → Picture Size → ENTER E ――Different screen adjustment options are displayed depending on the current input source. •• 16:9: Sets the picture to 16:9 wide mode. Picture Size Picture Size •• Zoom1: Use for moderate magnification. Cuts off the top and sides. 16:9 •• Smart View 1: Reduces the 16:9 picture by 50%. · Position Resolution •• Zoom2: Use for a stronger magnification.
Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom. ――To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Custom, follow these steps. Picture Size Picture Size Custom · Position Resolution 1 Press the d button to select Position. Press the E button. 2 Press the u or d button to move the picture up or down. 3 Press the E button.
Resolution If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu.
Auto Adjustment Adjust frequency values/positions and fine tune the settings automatically. MENU m → Picture → Auto Adjustment → ENTER E Picture Auto Adjustment -- Available in PC mode only. -- The displayed image may differ depending on the model. PC Screen Adjustment MENU m → Picture → PC Screen Adjustment → ENTER E Picture •• Coarse / Fine Removes or reduces picture noise.
Picture Off Selecting Picture Off switches off the screen. The volume is not disabled. To switch the screen on, press any button other than the volume button. MENU m → Picture → Picture Off → ENTER E Picture Picture Off -- The displayed image may differ depending on the model. Reset Picture Resets your current picture mode to its default settings. MENU m → Picture → Reset Picture → ENTER E Picture Reset Picture -- The displayed image may differ depending on the model.
Chapter 07 OnScreen Display PIP PIP Settings MENU m → OnScreen Display → PIP → ENTER E Main picture OnScreen Display PIP Display Orientation Screen Protection Message Display Menu Language The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen.
•• PIP (Off / On): Activate or deactivate the PIP function. PIP •• Source: You can select a source of the sub picture. •• Antenna (Air / Cable): Select either Air or Cable as the input source for the sub-screen. ――This option is enabled if the secondary display is set to TV. PIP On Source TV Antenna Air Channel Air 4 •• Channel: Select the channel for the sub-screen. ――This option is enabled if the secondary display is set to TV.
Display Orientation Onscreen Menu Orientation Set the menu screen orientation. MENU m → OnScreen Display → Display Orientation → ENTER E •• Landscape: Display the menu in landscape mode (default). •• Portrait: Display the menu in portrait mode on the right side of the product screen. Display Orientation Onscreen Menu Orientation Landscape Source Content Orientation Landscape Aspect Ratio Full Screen -- The displayed image may differ depending on the model.
Screen Protection Auto Protection Time MENU m → OnScreen Display → Screen Protection → ENTER E Screen Protection Auto Protection Time Screen Burn Protection If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen.
Timer Screen Burn Protection You can set the timer for Screen Burn Protection. Pixel Shift The Screen Burn Protection feature stops automatically after a specified period of time. Timer Timer Immediate Display Off Side Gray Off -- The displayed image may differ depending on the model. Off Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Immediate Display Screen Burn Protection Select the screen saver you want to display immediately. Pixel Shift •• Off / Pixel / Rolling Bar / Fading Screen Timer Side Gray Immediate Display Off Side Gray Off When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen. •• Off / Light / Dark -- The displayed image may differ depending on the model.
Message Display Source Info Select whether to display the source OSD when the input source changes. MENU m → OnScreen Display → Message Display → ENTER E No Signal Message Message Display Source Info On No Signal Message On MDC Message On Download Status Message Off -- The displayed image may differ depending on the model. •• Off / On Select whether to display the no-signal OSD when no signal is detected.
Menu Language Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. MENU m → OnScreen Display → Menu Language → ENTER E OnScreen Display Menu Language English -- The displayed image may differ depending on the model. Reset OnScreen Display This option returns the current settings under OnScreen Display to the default factory settings.
Chapter 08 Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode You can select a sound mode to suit your personal preferences. •• Standard: Selects the normal sound mode. •• Music: Emphasizes music over voices. MENU m → Sound → Sound Mode → ENTER E •• Movie: Provides the best sound for movies. •• Clear Voice: Emphasizes voices over other sounds.
Sound Effect Configure your preferred sound effect for output sound. ――If Speaker Settings is set to External, Sound Effect is disabled. ――Available only when Sound Mode is set to Standard. MENU m → Sound → Sound Effect → ENTER E Virtual Surround Sound Effect Virtual Surround Off Dialog Clarity Off Equalizer -- The displayed image may differ depending on the model. This function provides a virtual 5.
HDMI Sound Select whether to hear from AV(HDMI) or PC(DVI). •• AV(HDMI) / PC(DVI) MENU m → Sound → HDMI Sound → ENTER E Sound HDMI Sound AV(HDMI) -- The displayed image may differ depending on the model. Sound on Video Call MENU m → Sound → Sound on Video Call → ENTER E Select sound output to listen to during a video call. •• Current Source / Video Call ――If Speaker Settings is set to External, Sound on Video Call is disabled.
Dolby Digital Comp Set Dolby Digital Compression mode. •• Line / RF MENU m → Sound → Dolby Digital Comp → ENTER E Sound Dolby Digital Comp RF -- The displayed image may differ depending on the model.
Auto Volume The volume can vary depending on the channel. Automatically equalize the volume level when switching to another channel. •• Off / Normal / Night MENU m → Sound → Auto Volume → ENTER E Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same. Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you may want to keep the volume low.
Chapter 09 Broadcasting Configure the Broadcasting settings for the product. Available in TV mode only. Auto Program This feature automatically searches and saves all received channels. •• Auto Program takes about 6–7 minutes. MENU m → Broadcasting → Auto Program → ENTER E Broadcasting Auto Program Antenna Channel List Edit Channel Edit Favorites Audio Options Program Rating Lock Air 1 Go to the Auto Program menu. 2 Press the Start button. 3 Select a broadcast signal to search.
Antenna Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the LED display. •• Air / Cable MENU m → Broadcasting → Antenna → ENTER E Broadcasting Antenna Air -- The displayed image may differ depending on the model. -- Available in TV mode only.
Channel List MENU m → Broadcasting → Channel List → ENTER E Broadcasting Register or delete channels. Add favorite channels or rename analog channels. Select a desired channel from Channel List to view the channel instantly. ――To navigate Channel List faster, press the channel buttons. The channel list changes page by page. Added Ch. Shows all added channels. Channel List Favorites 1 ~ Favorites 5 Shows all favorite channels, in up to five groups. Each group has a separate screen.
Edit Channel Manage channels saved on your TV. Delete channels, re-register deleted channels or rename analog channels. Icons found in the edit channel page MENU m → Broadcasting → Edit Channel → ENTER E Broadcasting •• •• A : Analog channel *: A channel that is selected Deleting/registering channels Edit Channel Deleting channels 1 Select channels to delete from the screen. To cancel, select again.
Editing registered channels Select Options from the edit channel page. The following functions are provided in the page. Provided functions may vary depending on the broadcast signal. Option Name Operations Select All Select all channels in the Edit Channel page. Deselect All Deselect all channels. Antenna Select either Air or Cable as digital channel mode. Category Channels saved on your TV are classified under the All and Added Ch. categories. Select a desired category.
Edit Favorites MENU m → Broadcasting → Edit Favorites → ENTER E Broadcasting Creating a favorite channel list Set frequently viewed channels as favorite channels. Favorite channels are indicated by a symbol in the Edit Channel or Channel List page. A maximum of five favorite channel lists are allowed. Create different favorite channel lists for each family member. Adding the current channel to a favorite channel list Add the channel you are currently watching to a favorite channel list.
Viewing channels saved under a favorite channel list Deleting channels from a favorite channel list ――Favorite channel lists are only displayed if they have been created previously. Delete channels from a favorite channel list, if required. When changing the channel using the channel buttons, channels saved in favorite channel lists can only be accessed. 1 1 Select Channel List from the Broadcasting menu. The channel list is displayed.
Renaming a favorite channel list Change the name of a favorite channel list, if required. 1 Select Change Fav. from the screen to change the favorite channel list on the right to another desired favorite channel list. 2 Select Options from the screen. Sub-menu items are displayed. 3 Select Rename Favorites from the sub-menu items. A prompt box appears. 4 Change the favorite channel list using the prompt box. The name for a favorite channel list can be up to 20 characters long.
Audio Options Preferred Language (for digital broadcasts) MENU m → Broadcasting → Audio Options → ENTER E Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous translations of the program into foreign languages). ――You can only select a language from among the ones being broadcasted. Audio Options Preferred Language Multi-Track Sound Use the up and down arrow keys to select a language, and then press E.
Program Rating Lock When turned on, the Program Rating Lock feature can automatically block programs that you deem inappropriate for your children. You must enter a PIN (personal identification number) before you can set or change any of the Program Rating Lock restrictions. MENU m → Broadcasting → Program Rating Lock → ENTER E •• Off / On ――This option is available when the input source is TV, AV. ――The default PIN number for a new product set is “0-0-0-0”.
•• Canadian English Rating: You can block TV programs based on their Anglophone Canadian rating. Canadian English Rating displays a column with locks and the following ratings categories. C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. / G: General programming, suitable for all audiences. / PG: Parental Guidance.
Channel Settings Fine Tune (analog channels only) MENU m → Broadcasting → Channel Settings → ENTER E Broadcasting Channel Settings If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. ――Settings are applied to the channel you’re currently watching.
Chapter 10 Network Network Status Network Settings MENU m → Network → Network Status → ENTER E MENU m → Network → Network Settings → ENTER E You can check the current network and Internet status. Configure network settings to use various smart hub features such as Internet search, content sharing through a home network and feature updates. Network Status Your wireless network and Internet connection are setup and ready to use. Network Settings Select your network type.
Network Settings (Wired) •• Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. Connecting to a Wired Network There are three ways to attach your product to your LAN using cable.
Set the network connection to use Internet services such as perform software upgrades. 2 In the pop-up menu that appears, click Status. Automatic Network Settings (Wired) 3 On the dialog that appears, click the Support tab. 4 On the Support Tab, click the Details button. The Network connection values are displayed. Connect to the network using a LAN cable. Make sure a LAN cable is connected first.
Network Setting (Wireless) Connecting to a Wireless Network Wireless IP sharer (router having DHCP server) The LAN Port on the Wall LAN Cable Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly. ――Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure.
6 When done, use the right arrow button to move the cursor to Done, and then press E. The How to set up manually network connection screen appears and the verification process starts. 1 Set Network type to Wireless from the Network Settings page. 2 The Network function searches for available wireless networks. When done, it displays a list of the ――A connection with the router is established, but the Internet cannot be accessed.
10 When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts. 11 When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.” message appears. WPS(PBC) How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps. 1 Set Network type to Wireless from the Network Settings page. 2 Select WPS(PBC), press E, and then press E again.
Wi-Fi Direct MENU m → Network → Wi-Fi Direct → ENTER E Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router. To use this function, your mobile device should be supported by the Wi-Fi Direct. To connect your mobile device with your product using Wi-Fi Direct, follow these steps: 1 Go to Wi-Fi Direct screen. The product starts to search devices. 2 Turn on the Wi-Fi Direct function on your device.
Screen Mirroring Server Network Settings MENU m → Network → Screen Mirroring → ENTER E MENU m → Network → Server Network Settings → ENTER E Connect a mobile device that supports the mirroring function to the product. This allows the screen and sound from the mobile device to be outputted on the product. Mirroring refers to outputting the screen and sound from a mobile device on a display device.
Device Name MENU m → Network → Device Name → ENTER E Select or enter a device name. This name can be shown on network remote controls over the network.
Chapter 11 System Accessibility Voice Guide MENU m → System → Accessibility → ENTER E Voice Guide Switch Voice Guide on or off. The language used for Voice Guide will be the same as the current menu language. Accessibility Voice Guide Off Video Description Off Caption Off Menu Transparency Medium High Contrast Off Enlarge Off •• Off / On ――Volume, Speed and Pitch are enabled only when Voice Guide is set to On. Volume Set the volume level for the Voice Guide.
Video Description Accessibility Voice Guide Off Video Description Off Caption Off Menu Transparency Medium High Contrast Off Enlarge Off -- The displayed image may differ depending on the model. Add video description to the main audio to help the visually impaired. Caption Caption You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
Digital Caption Options (digital channels only) Configure the subtitle settings such as size and color. Adjusts the each option. When done, select Close. •• Size: Options include Default, Small, Standard, Large and Extra Large. The default is Standard. •• Font Style: Select the caption fonts. •• Font Color: You can change the color of the letters. Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. The default is White.
Menu Transparency Accessibility Voice Guide Off Video Description Off Caption Off Menu Transparency Medium High Contrast Off Enlarge Off Adjust transparency of menu box. •• High / Medium / Low High Contrast Set the background and font to high-contrast colors in Menu. Menu transparencies become opaque when the option is selected. •• Off / On Enlarge Set whether to enlarge highlighted item in Menu. •• Off / On -- The displayed image may differ depending on the model.
Setup Initial settings (Setup) After powering on the product for the first time, configure basic settings such as the language, channel and time. MENU m → System → Setup → ENTER E System Press the button. ――Initial Setup automatically changes Source to TV. 1 Selecting a language. Accessibility Setup Touch Control Press the u or d button, and then press the E button. Specify the OSD menu language. 2 3 Network Settings Set up your network connection. Press the E button to start.
7 Play via -- MagicInfo / URL Launcher Select the appropriate player mode depending on the environment where you are using the product. ――The Play via setting step only appears when connected to the network. 8 Device Name -- User Input / [Signage]Display 1 ~ 6 Select or enter a device name. This name can be shown on network remote controls over the network. 9 Setup Complete Congratulations! Setup is complete and you're ready to get started. To watch TV using the product now, select OK.
Touch Control Configure touch control related features. MENU m → System → Touch Control → ENTER E Touch Control Touch Control Lock Lock the touchscreen control mode to prevent devices from being controlled by touch input. •• Off / On Touch Control Lock Off Admin Menu Lock Admin Menu Lock Off Set the Admin Menu Lock to display the administrator settings menu when you tap and hold the finger on the screen.
Time You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. MENU m → System → Time → ENTER E Clock Set the current year, date and time. ――Press the INFO button if you want to view the current time. Time Clock Clock Mode DST Off Set the current time manually or automatically. Sleep Timer Off Auto: Have the product set the current time automatically using the time from a digital channel.
DST Time Switches the DST (Daylight Saving Time) function on or off. Clock Off / Auto / Manual DST Off Sleep Timer Off Power On Delay 0 sec •• Start Date: Set the start date of Daylight Saving Time. •• End Date: Set the end date of Daylight Saving Time. •• Time Offset: Select the correct time offset your timezone. ――Start Date, End Date and Time Offset are enabled only when DST is set to Manual. Sleep Timer -- The displayed image may differ depending on the model.
Auto Source Switching Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. MENU m → System → Auto Source Switching → ENTER E Auto Source Switching When the Auto Source Switching is On, the display video source will automatically be searched for active video.
Power Control Auto Power On This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed. MENU m → System → Power Control → ENTER E PC Module Power Power Control Auto Power On Off Max. Power Saving Power Button The PC module can be turned on/off separately from the LFD. Synced Power-On PC Module Power Standby Control •• Off / On On Auto Power On Only Network Standby -- The displayed image may differ depending on the model.
Standby Control Power Control Auto Power On Off PC Module Power Power Button •• Auto Power-saving mode will activate if no input signals are detected even though a source device is connected to the display. The message No Signal will appear if no source device is connected. Max. Power Saving Standby Control You can set the screen standby mode to be applied when an input signal is received.
Eco Solution Energy Saving Reduce the power consumption by adjusting the screen brightness. MENU m → System → Eco Solution → ENTER E •• Off / Low / Medium / High Eco Sensor Eco Solution Energy Saving Off Eco Sensor On Screen Lamp Schedule Off No Signal Power Off 15 min. Auto Power Off -- The displayed image may differ depending on the model. Off To enhance your power savings, the picture settings will automatically adapt to the light in the room.
No Signal Power Off Eco Solution Energy Saving Off Eco Sensor On Screen Lamp Schedule Off No Signal Power Off 15 min. Auto Power Off Off Save power by turning the device off when no signal is received from any source. •• Off / 15 min. / 30 min. / 60 min. ――Disabled when an attached PC is in power saving mode. ――The product will automatically power off at a specified time. The time can be changed as required.
Device Manager MENU m → System → Device Manager → ENTER E Device Manager Keyboard Settings Mouse Settings Pointer Settings Configure options for external input devices connected to the product. Keyboard Settings Connecting a keyboard to the product displays the Keyboard Settings menu. Select Keyboard Select a keyboard you want to use from the available connected keyboards. ――It is possible to use only one connected keyboard. Keyboard Options ――Depending on the country.
Device Manager Keyboard Settings Mouse Settings Pointer Settings Mouse Settings Connecting a mouse to the product displays the Mouse Settings menu. Select Mouse Configure mouse connection settings or options for connected mouse devices. ――Among connected mouse devices, only one mouse can be used. Mouse Options -- The displayed image may differ depending on the model. ――Depending on the country. Primary Button Select a button on the mouse that will perform basic functions (click and enter).
Device Manager Keyboard Settings Mouse Settings Pointer Settings Pointer Settings Specify the pointer size, speed and shape. Pointer Size Specify the pointer size. •• Small / Medium / Large / Extra large Pointer Speed -- The displayed image may differ depending on the model. Specify the pointer speed. A higher speed increases the pointer sensitivity. •• Slow / Standard / Fast Pointer Image Specify the pointer shape.
Play via Select the appropriate Play via mode depending on the environment where you are using the product. The home screen may be different depending on the setting. MENU m → System → Play via → ENTER E •• MagicInfo / URL Launcher System Play via MagicInfo -- The displayed image may differ depending on the model. Change PIN MENU m → System → Change PIN → ENTER E The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN.
Security Safety Lock ――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0". If you want to change the PIN number, use the Change PIN function. MENUm → System → Security → ENTERE It sets safe lock function. Security •• Off / On Safety Lock Off · Power On Button Off Button Lock Off USB Auto Play Lock Off Mobile Connection Lock Off -- The displayed image may differ depending on the model.
USB Auto Play Lock Security Safety Lock Off · Power On Button Off Button Lock Off USB Auto Play Lock Off Mobile Connection Lock Off Select whether to automatically play MagicInfo content saved on a connected USB device. •• Off Play MagicInfo content saved on the USB device automatically. •• On Do not play MagicInfo content saved on the USB device automatically. ――Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock : On" for five seconds.
Smart Security General Security provided to protect your TV and connected storage devices against viruses includes. MENUm → System → General → ENTERE Smart Security Use this option to turn Smart Security protection On/Off. General •• Off / On Smart Security On BD Wise On Anynet+ (HDMI-CEC) On HDMI Hot Plug On DivX® Video On Demand Game Mode -- The displayed image may differ depending on the model. Off Scan Inspect the TV and connected storage devices to check for viruses.
BD Wise General Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. Smart Security On BD Wise On •• Off / On ――Available when you connect Samsung products that support BD Wise through an HDMI cable to the product. Anynet+ (HDMI-CEC) On ――The BD Wise function is enabled only when a source device with the BD Wise function is connected.
Anynet+ (HDMI-CEC) General Smart Security On Anynet+ (HDMI-CEC) BD Wise On Anynet+ (HDMI-CEC) On HDMI Hot Plug On Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Auto Turn Off Anynet+ (HDMI-CEC) Setting an Anynet+ Device to turn Off automatically when the product is turned off. Anynet+ (HDMI-CEC) On Auto Turn Off No Device search -- The displayed image may differ depending on the model. •• No / Yes ――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. ――May not be enabled depending on the device.
Troubleshooting for Anynet+ Problem Anynet+ does not work. Possible Solution •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. •• Check if the Anynet+ device power cord is properly connected. •• Check the Anynet+ device’s Video/Audio/HDMI cable connections. •• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu. •• Check whether the remote control is Anynet+ compatible. •• Anynet+ doesn’t work in certain situations.
Problem The connected device is not displayed. Possible Solution •• Check whether or not the device supports Anynet+ functions. •• Check whether or not the HDMI cable is properly connected. •• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu. •• Search Anynet+ devices again. •• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable. •• Some HDMI cables may not support Anynet+ functions.
HDMI Hot Plug General Smart Security On BD Wise On Anynet+ (HDMI-CEC) On HDMI Hot Plug On DivX® Video On Demand Game Mode This feature is used to activate the time delay to turn on a DVI/HDMI source device. •• Off / On DivX® Video On Demand Shows the registration code authorized for the product. If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file. For more information about DivXⓇ VOD, visit “http://vod.divx.com”.
Reset System This option returns the current settings under system to the default factory settings. MENU m → System → Reset System → ENTER E System Reset System -- The displayed image may differ depending on the model.
Chapter 12 Support Software Update MENU m → Support → Software Update → ENTER E The Software Update menu lets you upgrade your product software to the latest version. ――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade. ――When you upgrade software, all video and audio settings you have made will return to their default settings.
Go to Home Accessible using the HOME Go to Home to play a variety of content from a memory device or a connected network. Player button on the remote control. Search or play channels or content saved on devices. MENU m → Support → Go to Home → ENTER E Schedule Create content schedules in local channels or edit saved channels. Player Schedule Template Play a variety of content, such as scheduled channels, templates or files. Template To create content, select a template.
Video Wall Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function. Network Status Check the current network and Internet connection.
Reset All This option returns all the current settings for a display to the default factory settings. MENU m → Support → Reset All → ENTER E Support Reset All -- The displayed image may differ depending on the model.
Chapter 13 Playing photos, videos and music (Media Play) Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. Play photos, videos or music saved on a storage device. Play a variety of content using the following methods. •• Using a USB device: Play media content such as videos, photos and music from a USB device. •• Connecting a storage device: Play media content saved on a storage device such as a smartphone, camera, PC or cloud service.
Compatible devices with media play •• Some USB digital cameras, smartphones and audio devices may not be compatible with the product. •• Media play is only compatible with USB MSC devices. •• MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.) These MSC devices must be connected directly to a USB port on the product.
Using a USB device Connecting a USB device 1 Turn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 The Player page automatically appears as soon as a USB device connects to the product. ――If only one USB device is connected, files saved on the USB device are displayed automatically. It is recommended to use a USB HDD that has a power adapter.
Playing media content from a PC/mobile device Approving a PC/mobile device connection Play photos, videos or music saved on a PC or mobile device. To play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved. ――The media playback feature is available on any devices that support DLNA DMC. The DLNA DMC feature allows you to search media content and control content playback from a product after connecting a PC or mobile device to the product.
When connected to a home network (DLNA) Play content saved on a device connected to a home network. ――Playing media content using a non-Samsung DLNA server may result in a compatibility issue. ――Playback of some media content shared with a PC or mobile device may not be possible depending on the content encoding type or the content file format. Some functions may not be available. ――Media content may not play properly if there is network congestion. If this is the case, use a USB device.
Menu items in the media content list page Option Name Operations Photos Videos Music Slide Show Start a slideshow. ――This menu item is not available if Sort by is set to Folder. Encoding Select an encoding language if the title of media content appears corrupted. c Rename Playlist Rename a playlist. c Delete Playlist Delete a playlist. c Add to Playlist Add files to a playlist or create a new playlist. c Play Selected Select and play desired content from the media content list.
Available buttons and features during photo playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. •• Pause / Play Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder. -- Pressing the INFO button while a device name is selected will display information about the selected device. -- Pressing the INFO button while a file is selected will display information about the selected file.
Available buttons and features during video playback Option Name Select Scene Operations Thumbnails: Select a scene and play the video from the scene. ――Thumbnails is not available if 1) the thumbnail of the video is not extracted yet, 2) the video contains audio only or 3) the video play time is shorter than 60 seconds. Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. Chapter Titles: Select and play another video in the same folder.
Available buttons and features during music playback •• Pause / Play Pause or play music. •• Rewind / Fast Forward Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select ∂ twice. •• Previous / Next To play the previous music file, select twice. Selecting once will play the current music from the beginning. To play the next music file, select ‚. •• Repeat Configure Repeat mode. Repeat One plays the current music file repeatedly.
Supported Subtitle and Media play file formats Subtitle External Internal •• MPEG-4 timed text (.ttxt) •• Xsub Container: AVI •• SAMI (.smi) •• SubStation Alpha Container: MKV •• SubRip (.srt) •• SubViewer (.sub) •• Advanced SubStation Alpha Container: MKV •• Micro DVD (.sub or .txt) •• SubStation Alpha (.ssa) •• SubRip Container: MKV •• Advanced SubStation Alpha (.ass) •• Powerdivx (.psb) •• MPEG-4 timed text Container: MP4 Supported image resolutions File Extension Type Resolution *.jpg, *.
Supported music file formats File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek (jump) function is not supported. Supports up to 2 channel Supported Video Formats •• Video content will not play, or not play correctly, if there is an error in the content or the container. •• Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
File Extension Container *.avi AVI *.mkv MKV *.asf ASF *.wmv MP4 *.mp4 3GP *.mov VRO *.3gp VOB *.vro PS *.mpg TS Video Codec DivX 3.11 / 4.x / 5.x / 6.x Resolution 1920 x 1080 Frame rate (fps) 6~30 Bit rate (Mbps) 30 Audio Codec AC3 LPCM ADMPCM MPEG4 SP / ASP (IMA, MS) AAC HE-AAC H.264 BP / MP / HP WMA DD+ Motion JPEG MPEG(MP3) *.mpeg DTS Core *.ts Window Media Video v9 G.711(ALaw,μ-Law) *.tp *.trp MPEG2 *.mov *.flv MPEG1 *.vob *.svi *.m2ts *.mts *.divx *.
Chapter 14 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating normally by using the product test function. If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card.
Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
Screen issue The screen display does not look normal. Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in a sports event or action video. Low signal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone within a distance of one-meter radius may cause static on analog and digital products. The brightness and color do not look normal.
Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Video is available but there is no sound. If an HDMI cable is connected, check the audio output settings on the PC. Go to Sound and change Speaker Settings to Internal. If a source device is used •• Make sure the audio cable is properly connected to the audio input port on the product.
Sound issue There is an echo sound coming from the speakers. Different decoding speeds between the product speakers and external speakers can cause an echo. In this case, set Speaker Settings to External. Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity.
Other issue Audio or video cuts out intermittently. Check the cable connection and connect it again if required. Using a very hard or thick cable may corrupt audio and video files. Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it is recommended to use right-angle cables. Small particles are found on the edges of the product. The particles are part of the product design. The product is not defective. The PIP menu is not available.
Other issue The IR sensor is not functioning. Make sure the sensor light turns on when a button is pressed on the remote control. •• If the sensor light does not turn on, turn the power switch off and then on again on the back of the product. (The power LED lights up red when the screen is switched off.) If the sensor light still does not turn on after the power switch is turned off and then on again, an internal jack may be disconnected. Contact your nearest service center to have the product serviced.
Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. •• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor and adjust the frequency in Monitor Settings. •• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and adjust the frequency in Monitor Settings. -- Refer to the user manual for your PC or graphics card for further instructions on adjustment.
Question How do I set powersaving mode? Answer •• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. •• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver Settings or BIOS SETUP on the PC. •• Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
Chapter 15 Specifications - General Size Model Name Panel - DB32E / DM32E Size 32 CLASS (31.5 inches / 80 cm) 40 CLASS (40.0 inches / 101 cm) Display area 698.4 mm (H) x 392.85 mm (V) / 27.50 inches (H) x 15.47 inches (V) 885.6 mm (H) x 498.15 mm (V) / 34.87 inches (H) x 19.61 inches (V) 10 W 10 W + 10 W Display area H V Audio Output Model Name Panel Audio Output DB40E / DM40E DB48E / DM48E DB55E / DM55E Size 48 CLASS (47.6 inches / 121 cm) 55 CLASS (54.
Model Name Panel DM65E Size 65 CLASS (64.5 inches / 163 cm) 75 CLASS (74.5 inches / 189 cm) Display area 1428.48 mm (H) x 803.52 mm (V) / 56.24 inches (H) x 31.63 inches (V) 1650.24 mm (H) x 928.26 mm (V) / 64.97 inches (H) x 36.55 inches (V) 10 W + 10 W 10 W + 10 W Audio Output Model Name Panel DH40E 40 CLASS (40.0 inches / 101 cm) 48 CLASS (47.6 inches / 121 cm) Display area 885.6 mm (H) x 498.15 mm (V) / 34.87 inches (H) x 19.61 inches (V) 1054.08 mm (H) x 592.92 mm (V) / 41.
Power Supply Environmental considerations AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Operating Temperature : 32 F - 104 F (0 C - 40 C), With PIM : 50 F - 104 F (10 C - 40 C) * For installing the housing, keep the internal temperature at 40 C or below.
Preset Timing Modes ――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. ――Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product.
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.
Chapter 16 Appendix Responsibility for the Pay Service (Cost to Customers) ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
Optimum Picture Quality and Afterimage Burn-in Prevention Black Matrix Common Electrode (ITO) Color-Filter Optimum Picture Quality •• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. -- The number of sub-pixels by panel type: 6,220,800 Source Drain •• Run Auto Adjustment to improve the picture quality.
Preventing afterimage burn-in ――The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. •• Powering Off, Screen Saver and Power Saving Mode -- Power off the product for 2 hours after using it for 12 hours. -- Go to Display Properties > Power Supply on your PC and set the product to power off as required.
License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium content. DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Ⓡ Ⓡ Manufactured under a license from U.S.
Terminology 480i / 480p / 720p / 1080i / 1080p____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method. - Scanning Scanning refers to a process of sending pixels that form an image progressively. A larger number of pixels will deliver a clearer and more vivid picture.
