Operation Manual

147
Time
MENU m → System → Time → ENTER E
Time
Clock
DST
Sleep Timer
Power On Delay
O
O
0 sec
-
The displayed image may differ depending on the model.
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time
using the Timer function.
Clock
Set the current year, date and time.
―
Press the INFO button if you want to view the current time.
Clock Mode
Set the current time manually or automatically.
Auto: Have the product set the current time automatically using the time from a digital channel.
―
You must have the cable or an antenna connected to the product to set the time automatically.
Manual: Set the current time manually.
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
―
Available only when Clock Mode is set to Manual.
―
You can set the Date and Time directly by pressing the number buttons on the remote control.
Time Zone
Select your time zone.
―
This function is only available when the Clock Mode is set to Auto.
Time Oset
If the current time that has been automatically set is different from the actual time, adjust the hour between the interval -12
hours and +12 hours.
―
Time Offset is only available when Clock Mode is set to Auto and the antenna is connected.
―
When the current time information cannot be received through the signal from a broadcaster, the current time is set
through the network (e.g., when watching TV through a cable broadcast receiver or satellite receiver).