User Guide DS-5021D / DS-5014D This manual contains information that is proprietary to SAMSUNG Electronics Co. Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to third parties in any form without the prior written consent of SAMSUNG Electronics Co. Ltd.
COPYRIGHT This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to third parties in any form without the prior written consent of SAMSUNG Electronics Co., Ltd. TRADEMARKS OfficeServ DS-5021D, OfficeServ DS-5014D are the trademark of SAMSUNG Electronics Co., Ltd.
ABOUT THIS GUIDE This User guide provides instructions for the use of Samsung’s latest DS-5021D and DS-5014D 2 line LCD digital phones that can be used in connection with Samsung’s Enterprise IP Solutions, OfficeServ System. Please take the time to study this guide to become familiar with the operation of your DS- 5021D/5014D phone and the benefits this new IP technology can provide. Keep this guide handy. You may need to look up instructions for infrequently used features.
SAFETY CONCERNS This page is intentionally left blank. Page II © SAMSUNG Electronics Co., Ltd.
SAFETY CONCERNS For product safety and correct operation, the following information must be read before the installation and operation of your DS-5021D/5014D digital phone. Symbols Caution Indication of a general caution Restriction Indication of a prohibited action when using the product Instruction Indication of a required action © SAMSUNG Electronics Co., Ltd.
SAFETY CONCERNS WARNING The handset receiver on the digital phone may retain metallic objects. Care should be taken when using the handset in the vicinity of small metal objects. Avoid placing objects containing water such as vases, cups, cosmetics, and medicines near the phone. Moisture in the digital phone may cause a fire and electric shocks. Do not install the phone on an unstable surface or in direct sunlight.
SAFETY CONCERNS Do not install the phone near a heater or naked flames (cigarette lighter, heating apparatus, etc.). It may cause a fire or electric shocks. Do not use flammable solvent or materials near the phone. Do not store them near the phone. It may cause a fire or electric shocks. If the phone makes excessive noise, emits an odour, or smoke, immediately unplug the phone and call your Authorised Samsung Reseller. © SAMSUNG Electronics Co., Ltd.
SAFETY CONCERNS CAUTION Use a soft dry cloth to clean the phone. Do not use any chemical solvents like wax, benzene, alcohol, thinner, aerosols, lubricant, or detergent. The use of chemicals on the phone may cause fading/discoloring or damage to the parts. Do not place heavy things on the phone. It may cause damage to some parts. Do not separate, repair or remodel the phone arbitrarily. If a repair is needed, please contact your Authorised Samsung Reseller. Page VI © SAMSUNG Electronics Co., Ltd.
TABLE OF CONTENTS ABOUT THIS GUIDE Conventions.......................................................................................................................... I SAFETY CONCERNS Symbols .............................................................................................................................. III Warning...............................................................................................................................IV Caution .......................................
TABLE OF CONTENTS THINGS YOU SHOULD KNOW 1. About Stations and Trunk Lines............................................................................................... 15 2. Selecting System Functions...................................................................................................... 16 Using the Scroll / Soft Button............................................................................................. 16 Using the Function Code .................................................
TABLE OF CONTENTS 2. Intercom Calls .............................................................................................................................. 34 Assigning the Names to Your Extension ........................................................................... 34 Calling an Extension Number ............................................................................................ 35 Answering an Intercom Call.............................................................................
TABLE OF CONTENTS CONVENIENT FEATURES 1. Do Not Disturb ............................................................................................................................. 69 Setting Do Not Disturb ....................................................................................................... 69 Cancelling Do Not Disturb ................................................................................................. 70 One Time DND .......................................................
TABLE OF CONTENTS 4. Alarm Features............................................................................................................................. 95 Appointment Reminder / Alarm Clock ............................................................................... 95 Alarm Cancel ..................................................................................................................... 96 Alarm Message.................................................................................
TABLE OF CONTENTS APPLICATION MENUS 1. Navigation Buttons ................................................................................................................... 115 Menu Button .................................................................................................................... 115 Send Button ..................................................................................................................... 116 End Button ......................................................
PREPARATION 1. Main Features Application menu This button allows you to access the digital phone’s menu call log, incoming call log, system directory functions, Enter End Send Menu functions. The menu functions include the recent outgoing transferring incoming calls, inquiry of speed dial numbers, and alarm function. Speed Dial For frequently used phone numbers, you can press one speed dial button to make a call to the speed dial number. Pickup You can answer a call at another extension.
PREPARATION Hold Hold You can use the Hold feature when you need something or another call arrives. Use this button to temporarily hold the current call until you are ready to resume the call. You can even pickup a held call at another station. Conference Calls This button is used when multiple parties need to be connected simultaneously during a phone conversation. Up to five parties including you can be connected in a conference call.
PREPARATION Page If you have an urgent announcement to make, or you wish to locate a colleague, you can page through the speaker of other stations, or through optional external speakers. Executive/Secretary When the Executive/Secretary button is pressed once, the executive and his/her secretary can be connected. The secretary can use this Executive/Secretary feature to receive an incoming call and then simply forward it to the executive.
PREPARATION 2. Checking Parts in the Package Dual–Jack Modular Line Handset DS-5021D User Guide Phone Stand - Please contact your Authorised Samsung Reseller if any item above is missing or damaged. NOTE Page 4 © SAMSUNG Electronics Co., Ltd.
PREPARATION 3. Name and Features of the DS-5021D / 5014D Digital phone Front Panel Programmable Buttons (DS-5021D : 21, DS-5014D : 14) Soft Buttons Scroll Button Status Indicator Speaker LCD screen Redial Button Volume Button Conference Button Transfer Button Dial Buttons Speaker Button Hold Button Microphone Navigation Buttons Se nd nu Me d En © SAMSUNG Electronics Co., Ltd.
PREPARATION Name and Features of Each Part EMBEDEMBED Programmable Buttons The DS-5021D digital phone has 21 programmable buttons and the DS-5014D digital phone has 14 programmable buttons. The programmable buttons allow you to activate desired functions or telephone numbers with a single button press. Among the programmable buttons, the functions of 3 buttons are pre-set as follows. ! Message Button When someone has left you a message this button’s LED blinks.
PREPARATION Conference Button This button allows you to set up a conference call for up to 5 persons, including you. Transfer Button This button is used in the following cases : ! When transferring your current call to other extension, extension group or externally. ! During a screened transfer pressing the transfer button allows you to toggle between the Original caller and station user you wish to transfer the caller to. ! To enter station based programming options.
PREPARATION Bottom Panel of the DS-5021D / 5014D Groove for the Desk Stand Wall Mounting Holes Phone Line Connection Port Expansion Module Handset Connection Port Groove for the Wall Mounting Stand Handset Connection Port Plug the handset cord into this port marked with the symbol. Phone Line Connection Port Connect the phone line cord. Expansion Module Plug the KDB module into this module and secure with the two screws provided.
PREPARATION Additional Module As the additional modules that can be connected to the DS-5021D/5014D phones and provide various functions, there are KDB-D/KDB-S/KDB-F for the modules types. The acoustic optic modulator(AOM) can be also connected to the DS-5021D/5014D phone. Module Type Functions KDB-D Can connect the digital extension device.(Supplying the DLI Port) KDB-S Can connect a regular phone with a wireless phone.
PREPARATION KDB-F The standard mode of speakerphone in DS-5021D/5014D phone is ‘Half Duplex’. The half duplex means that it can communicate in both directions but only one way at a time. The KDB-F enhances the speakerphone mode to the full duplex, so it can provide better communication. Connecting up to 3 external microphones to the KDB-F module, a conference can use this in a very convenient way. To use this function, the phone shall have the pre-programmed EXTMIC button.
PREPARATION 4. Assembling the DS-5021D / 5014D Digital phone Connecting lines to the phone 1. Connect the handset to the handset connection port. 2. Connect the line cord to the phone line connection port. Using the Desktop Stand If the phone needs to be used in a desktop environment, insert the desktop stand into the two side holes, which are located at the rear of the phone, and push it in the upward direction, as shown in the figure below. © SAMSUNG Electronics Co., Ltd.
PREPARATION When used as the wall mounting digital phone Assemble the stand into the left/right slots that are located in the lower section of the base. Place the two holes for wall mounting on screws that are installed on the wall. When used as a wall mounted digital phone, the location of the handset hook should be changed so that the handset can be secured. Take out the handset hook, flip it over and then insert the hook back into the hook holder as shown. Page 12 © SAMSUNG Electronics Co., Ltd.
PREPARATION Adding a KDB Module 1. In the center of the bottom panel, there is an expansion module that can install KDB. Two connectors are covered with the plastic cover, which shall be removed in order to install the KDB module. Plastic Cover 2. After removing the cover, plug in the KDB module and secure with the two screws provided. KDB © SAMSUNG Electronics Co., Ltd.
PREPARATION Adding an AOM 1. Connect the DLI cable on the main system to the DLI port at the bottom of AOM. At this time, the AOM extension pair shall be assigned at the telephone system in order to use AOM. 2. Prepare the following AOM connectors and 4 screws that are provided with AOM itself. 3. Connect AOM to the phone by using the AOM connector. Place the AOM connector over two screw holes in the right side of AOM and the other two screw holes at the side of DS-5021D/5014D line cord port.
THINGS YOU SHOULD KNOW 1. About Stations and Trunk Lines A station is a digital or digital phone or standard telephone connected to the OfficeServ system. Telephone S ys te m A trunk line is directly connected to your phone company’s telephone network. It allows you to make telephone calls to parties outside your office(for example, your home) or to receive incoming calls from external parties. Outs ide Trunk Line Ins ide Telephone S ys te m E xte ns ion © SAMSUNG Electronics Co., Ltd.
THINGS YOU SHOULD KNOW 2. Selecting System Functions To use the functions of the OfficeServ system you can: press the programmable button that is registered with the required function, select the function by using the Scroll button and 3 Soft buttons that are underneath the LCD screen or dial the function code. For example, if the callback function is required, find the programmable button with this function first.
THINGS YOU SHOULD KNOW 3. Keep pressing the Scroll button until the desired function shows up. If there is a " symbol displayed, it means that Scroll additional menus are available. 4. If the desired function appears on the LCD screen, select it by using the Soft button associated with the desired function. Using the Function Code Many of the OfficeServ system functions can be invoked by dialling function codes.
THINGS YOU SHOULD KNOW Dial Button Function 44 Reserve connection to a busy 45 Dial Button Function 600 Cancel all call forwarding Busy station Camp-on 601+xxx Set Forward All Calls 46 Conference 602+xxx Set Forward Busy 47 Enter account code 603+xxx Set Forward No Ans 48 Set station message 604+xxx Set Forward Busy/No Ans 49 Flash 66 Group call pickup 500~529 Station group 67 Night ring answer 53+grp+0 Exclude group 681 Voice Dialler 53+grp+1 Include group 682 Record
THINGS YOU SHOULD KNOW Assigning the Programmable Button Extenders By adding an extender to some buttons, you can use the digital phone more conveniently. For example, if the extender 4 is added to the [PAGE] button, when this button is pressed, it will allow a page announcement to be made to stations in page zone 4. Refer to the following table to select the extenders that can be assigned for each programmable button.
THINGS YOU SHOULD KNOW 1. Press the [Transfer] button. 2. Press [1] [0] [7]. 3. Select the programmable button that requires !Volume" "] an extender by using the [! button to, scroll through programmable buttons and then press the right Soft button, or press the programmable button to add an extender. 4. When the cursor comes to the input area on the LCD panel, dial the required extender. 5. Save the extender by pressing the right or left Soft button. Press the [Transfer] button to finish programming.
THINGS YOU SHOULD KNOW 3. Entering Characters Using the dial buttons of this phone, you can easily enter/edit, letters, numbers and special characters. Special Button Used To enter letters of the alphabet the following special button is used. Button A : Switch to capital/small letters when entering characters. ! The A button of the DS-5021D/5014D digital phone is located on the first button of the bottom row of the programmable buttons below the LCD screen. An example for the DS-5021D is shown.
THINGS YOU SHOULD KNOW Entering Characters Press the [!Volume"] button to move the cursor and insert or modify the desired letter. Press the [Volume"] button and move the cursor one space to the right to use the same dial button letters as the previous letter used. Procedures for entering characters are described below. Enter the characters according to the table below. Press button A to switch between capital and lower case letters. Dial frequency 1 2 3 4 5 0 < > .
THINGS YOU SHOULD KNOW 4. Configuring My Phone Allows you to set the feature preferences for your digital phone. To Change the Digital phone Passcode The pre-assigned station passcode is 1234. You can change the station passcode if needed. 1. Press the [Transfer] button. 2. Press [1] [0] [1]. 3. Enter the previous passcode. 4. Enter the new passcode. The passcode must be a 4-digit number. 5. Re-enter the new passcode for confirmation. If the passcode is entered correctly, a beep will be heard twice.
THINGS YOU SHOULD KNOW 6. Save the new passcode by pressing the [Transfer] button. Setting the Answer Mode Intercom calls can be answered with one of three answer modes. A different answering mode can be selected for [0] ANS MODE : the answer mode when answering intercom calls. ! [1] EXEC ANS : the answer mode when answering calls using the executive/secretary hot line. ! You must be a designated Boss or Secretary for this option to be available. 1. Press the [Transfer] button. 2. Dial [1] [0] [3]. 3.
THINGS YOU SHOULD KNOW 5. Press the [Transfer] button and save the selected entry. NOTE - If your digital phones is programmed for the Voice Announce answering function, and Call Forwarding No Answer is set, you must press the [Speaker] button or [Send] button to answer before the no an answer timer expires. Otherwise, the call will be forwarded. Using the Headset / Handset (Headset Operation) The DS-5021D/5014D digital phone user can switch between handset mode and headset mode.
THINGS YOU SHOULD KNOW 4. Save the selected entry by pressing the [Transfer] button. NOTE - The digital phone can have a headset mode button. If so, press this button when its LED is off and the digital phone is changed to headset mode and the LED will light up. Press this button again to return the digital phone back to handset mode and the LED button goes off. Enabling / Disabling the Key Confirmation Tone You can enable or disable a short confirmation tone whenever a dial button is pressed. 1.
THINGS YOU SHOULD KNOW Pulse to Tone Changeover When making an outside call on a dial pulse(mechanical) line, press the [#] button. All digits dialled after the [#] button will be sent as tones(electronic method). Hot Keypad The hot keypad allows you to make a call or activate the other functions of the OfficeServ system by pressing the dial buttons or function keys directly, without picking up the handset or pressing the [Speaker] button.
THINGS YOU SHOULD KNOW 5. Volume Adjustment !Volume" "] button is used for adjusting the volume of the handset, speaker, and ringer. The [! Adjusting Handset Volume 1. During a call using the handset. 2. Press the [Volume" "] button to increase the handset volume. 3. Press the [! !Volume] button to decrease the handset volume. Page 28 © SAMSUNG Electronics Co., Ltd.
THINGS YOU SHOULD KNOW Adjusting Speaker Volume 1. During a call using the [Speaker] button. 2. Press the [Volume" "] button to increase the speaker volume. 3. Press the [! !Volume] button to decrease the speaker volume. Adjusting Ring Volume 1. To increase the ring volume, press the [Volume" "] button while the phone is ringing. 2. To decrease the speaker volume, press the [! !Volume] button while the phone is ringing. © SAMSUNG Electronics Co., Ltd.
THINGS YOU SHOULD KNOW 6. Types of Signal Tone The types of signal tone used in this telephone system are described in the following table. Signal Usages Signal Interval Tone Name Dial tone Ring back tone Busy tone Transfer tone Confirmation tone A steady tone that indicates you can begin dialling. Indicates the station you dialled is ringing. Indicates the station you dialled is busy. Indicates your call is being held and you can dial another station.
THINGS YOU SHOULD KNOW 7. Telephone Status Indicator The status indicator turns on or off according to the telephone status. Functions Status of LCD Indicators Busy/Off-hook Steady red Extension Ring Flashing red Trunk Ring Flashing green Recalling Flashing yellow Message waiting Flashing red Calling Denied Fast flashing red within 1-second interval. © SAMSUNG Electronics Co., Ltd.
THINGS YOU SHOULD KNOW 8. Button LED The [Transfer] button, [Hold] button, and [Speaker] button have a LED that turns on or off according to the phone status. Transfer Hold Speaker For incoming external calls or intercom calls ringing at your digital phone the trunk button LED or Call button LED will flash green. The trunk button LED will flash red on other digital phones with the same trunk button. While holding a call, the green LED of the trunk line will blink.
BASIC FEATURES 1. Before Making / Answering a Call This section provides you with information on how to make or answer a call by using the handset or speakerphone. Calling Methods ▪ Using a handset This function allows you to lift the handset and make a call. ▪ Using a speakerphone This function allows you to make a call through the speakerphone without lifting the handset. Call Answering Methods ▪ Using a handset This function allows you to lift the handset and answer a call.
BASIC FEATURES 2. Intercom Calls This function is used when you want to make a call to other stations. Assigning the Names to Your Extension You can assign a name of up to 11 letters to your extension. This allows other extension users with display stations to call you using the directory dial feature and to see your name when you call them. 1. Press the [Transfer] button. 2. Press Dial [1] [0] [4]. 3. Enter the name. Refer to the ‘Things You Should Know’ in this guide for entering characters. 4.
BASIC FEATURES Calling an Extension Number 1. Pick up the handset and check for dial tone. 2. Dial the extension number or station group number. Wait until the other party answers the call. If a short signal tone(not a ringing tone) is heard, the receiving extension has set up the Voice Announce or Automatic Answer function. 3. Replace the handset or press the [End] button to finish the call.
BASIC FEATURES Answering an Intercom Call 1. When the Digital phone rings, pick up the handset or press the [Speaker] button or [Send] button. 2. To finish the call replace the handset or press either the [Speaker] or [End] button. Voice Page Announce Mode (Intercom Calls Only) When another station calls you, a short signal tone will be heard followed by the caller’s announcement. 1. To answer the call, pick up the handset or press the [Send] button. 2.
BASIC FEATURES Automatic Answer Mode (Intercom Calls Only) When another station calls you, a short signal tone will be heard and then the Digital phone automatically answers the call. 1. The microphone and speaker are turned on and you can communicate hands-free. 2. For a private conversation, lift the handset. 3. To end the call, replace the handset or press either the [End] or [Speaker] button. © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES Busy Station Callback When the called station is busy, you can set a busy station callback. When the busy station becomes free, your Digital phone will ring. If you pick up the Digital phone, the other station will begin to ring. 1. When you hear a busy signal, press the [CBK] button or dial [4] [4]. Or, press [CBK] the Soft button corresponding to [CBK] on the LCD panel. 2. When you hear the confirmation signal, replace the handset. 3.
BASIC FEATURES Busy Station Camp-On When you call another station and receive a busy signal, you can give the called station off-hook ring tone and wait for a little while. 1. Press the [CAMP] button or dial [4] [5]. [CAMP] Or, press the Soft button corresponding to the [CAMP] on the LCD screen. 2. The called station will receive off-hook ring tone repeated every few seconds and an available [Call] button will flash to indicate your call is waiting. 3. Wait for the called party to answer.
BASIC FEATURES 3. Outside Calls This function is used when you want to make an external call using any available trunk line. Calling Outside numbers You can use a handset or speakerphone when calling an external number. To make an external call with a handset, follow the procedures below. 1. Pick up the handset. 2. Press the trunk or trunk group button or or dial the trunk group access code(e.g., 0). 3. Dial the telephone number you want to call. 4.
BASIC FEATURES To make an external call with a speakerphone, follow the procedures below. 1. Press the [Speaker] button. 2. Press the trunk line or dial the trunk access code. 3. Dial the telephone number. 4. Finish the call, by pressing the [Speaker] button. NOTE - If the LCR(Least Cost Routing) feature is enabled on the OfficeServ system, press the [LCR] button or dial the LCR access code. © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES Authorization Code and Account Code Authorization Code If your OfficeServ system is programmed to require you to enter an authorization code before making a call, dial [*] plus a valid code before selecting a trunk line. Account Code If your OfficeServ system is programmed to require you to enter an account code before making a call, press the [ACCT] button or dial [4] [7] plus a valid code, press the [ACCT] button again and then select a trunk line.
BASIC FEATURES Universal Answer External calls may be programmed to ring through an external speaker. In this case, dial [6] [7] or the press [UA] button to answer the call. New Call Press the [NEW] button to disconnect your existing call, wait for dial tone and then make a new call on the same line. If this [NEW] button does not appear on your Digital phone, press the Soft button corresponding to [NEW] on the LCD screen.
BASIC FEATURES 4. Lift the handset or press the [Send] button to respond to the Callback. Wait for dial tone and dial the telephone number or speed dial number again. - A callback will be cancelled if not answered within 30 seconds. If you have set a callback, your [CBK] button’s LED, if programmed, will light. NOTE Cancelling Callback A maximum of 5 callbacks can be set for extensions or external calls lines at the same time. To cancel a callback, follow the procedure below. 1.
BASIC FEATURES Redial To redial the last telephone number you dialled, press the [Send] button for approximately 2 seconds or dial [1] [9]. Pressing the [Redial] key will give you the option to review up to 10 of your previously dialled external numbers. You have to set ‘Redial Review’ as ‘On’ in the ‘MMC210’ to review these numbers. 1. Press the [Redial] button. 2.
BASIC FEATURES Save Number with Redial To save the number you just dialled for later use, press the [SAVE] button before hanging up. This saved number can be redialled at any time by pressing the [SNR] button or dialling [1] [7]. The same external trunk line will be selected for you. NOTE Page 46 - The saved telephone number will be saved in memory until you save another number. - Saved Number Redial does not apply to intercom calls. © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES Automatic Redial / Retry When you make an outside call and receive a busy signal, the OfficeServ system can automatically redial the number for you. It will automatically redial at a pre-programmed interval for up to 99 attempts. 1. When you hear a busy signal, press the [RETRY] button or press the Soft button corresponding to [RETRY] [RETRY] on the LCD screen. 2. The system will reserve the line and automatically redial the same number for you.
BASIC FEATURES Call Park You can park an outside call in one of 10 ‘parking orbits’. 1. Press the [PARK] button. [PARK] Or, press the Soft button corresponding to [PARK] on the LCD screen. 2. Dial the orbit number required, [0]-[9] ; the [PARK] button will flash. Or, press a dedicated [PARK] button ; the [PARK ] button will also flash. To have the call ’parked’ picked up by another station, notify the station user of the parking orbit number. 3.
BASIC FEATURES 4. Intercom / Outside Calls Holding a Call You can temporarily suspend a conversation without ending the call by placing the call on hold. Or, when another call is received, you can put your first call on hold and answer the new call. You can simply press the button on hold again to resume the conversation. The types of hold available are system hold(general hold), automatic hold, exclusive hold, and consultation hold. System Hold 1.
BASIC FEATURES Automatic Hold With Automatic Hold set, when you are answering an outside call, pressing the trunk line or flashing Call button will automatically put your outside call on hold and connect you to the next call. You can set Automatic hold on your digital phone by following the procedure below. 1. Press the [Transfer] button. 2. Dial [1] [1] [0]. 3. To use this function, dial [0] [0] [1], and if this function is not required, dial [0] [0] [0]. 4.
BASIC FEATURES Exclusive Hold To place an outside call on hold exclusively so that other users cannot get it. 1. Press the [Hold] button twice. 2. The call will flash green on your Digital phone and this line will show a steady red light on other stations. 3. To retrieve the call on hold, press the flashing green line button or press the [Hold] button. - Intercom calls will always be placed on exclusive hold. NOTE © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES Consultation Hold When you are talking to an external caller and it is necessary to consult with another extension. 1. Press the [Transfer] button ; you will hear transfer dial tone. Your outside call is placed on Transfer hold. 2. Dial the extension number. 3. Consult with the internal party. ~ Hello 4. Press the [Transfer] button to return to the outside party or to hang up to transfer the call.
BASIC FEATURES Hold Recall 1. If you leave a call on hold longer than the system hold timer allows, it will recall your station. At this time, the call button on hold will have a slow flashing amber light. If you do not answer this recall within a pre-programmed period of time, it may go to the system operator depending upon your OfficeServ system programming. 2. When your Digital phone rings, lift the handset or press the [Send] button to answer the recall. Retrieving Calls Held at Another Station 1.
BASIC FEATURES Call Pickup This section explains how to pickup a call that is ringing at another station. Station Call Pickup If a call rings on another station and you know the station number, you can answer the call on your digital phone. 1. A call is ringing on another station. 2. Pick up the handset and listen for the dial tone. 3. Dial [6] [5]. 4. Dial the station number that is ringing. Page 54 © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES Group Call Pickup Each station can be assigned to a call pickup group. Refer to your System Administrator for details on your pick up group. 1. When a call is ringing on another station assigned to your pick up group. 2. Pick up the handset and check for dial tone. 3. Dial [6] [6]. 4. Or press the flashing [GROUP PICKUP] button, or press [GROUP PICKUP] button [GROUP PICKUP] followed by the related group number.
BASIC FEATURES Dialling by Directory Name Each extension number or speed dial number can have a relevant directory name. You can select the extension number or speed dial number from the list of directory names by scrolling down in alphabetical order. This online directory allows you to make any extension call or to find a speed dial number within just a few seconds. 1. Press the [DIR] button, or press the Soft button related to [DIR] in [DIR] the CALL menu. 2.
BASIC FEATURES Transferring Calls You can transfer your call to another extension or return to the outside party. 1. While on a call, press the [Transfer] button. Your call is automatically put on transfer hold. 2. Dial an extension or group number. Or, press the [DSS] button or station group button. Your call will be automatically put on transfer hold. 3. For blind transfer, hang up when you hear ringing. Or, wait for the called party to answer and advise him/her of the call. Then hang up.
BASIC FEATURES Call Retransferring If you wish to send the call to another extension without waiting for the first station to hang up, simply press another [DSS] button. Or, press the CALL button or trunk line button to return to the outside party and begin the transfer process again. NOTE - When you are transferring a call to a station programmed for Voice Announce or Auto Answer, the transferred call will always ring.
BASIC FEATURES Transfer To Voice Mail This feature is used to send a call directly to a voice mailbox. Your Digital phone must have a correctly programmed [VT] button to accomplish this. 1. Press the [VT] button while you are on a call. [VT] Or, press the Soft button corresponding to [VT] on the LCD screen. 2. Dial the mailbox number. 3. Hang up when dialling is completed. © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES Call Waiting If an outside call or another station has camped-on to you, your Digital phone will ring and the waiting call’s LED will flash green. 1. Press the flashing button to answer the waiting call. If your Digital phonee has the Automatic Hold feature set, your current call will go on hold automatically. 2. If Automatic Hold is not set, press the [Hold] button and then press the button with the flashing LED.
BASIC FEATURES Speed-Dial You may assign any frequently used numbers to a personal speed dial number list for your station. These personal speed dial numbers are in addition to the system Speed dial numbers available. Speed dial numbers can be allocated to buttons which allow you to press the one touch speed dial button to call the number.
BASIC FEATURES Programming the Speed Dial Numbers Your station can be assigned up to fifty numbers, 00~49. Ask your System Administrator for the number of speed dial numbers that have been assigned to your station. ! To program the personal dial numbers, 1. Press the [Transfer] button and dial [1] [0] [5], without lifting the handset. 2. Select a free speed dial number location(00-49). 3. Dial either a specific trunk line number or the trunk access code. 4.
BASIC FEATURES Dialling Speed Dial Numbers You can dial a speed dial number stored in the list of system speed dial numbers between 500-999 or the list of your personal number between 00-49 using the following procedure. 1. Press the [Memory] button or dial [1] [6], without lifting the handset. [Memory] 2. Dial the speed dial location number that is programmed with the telephone number you wish to call. 3. The telephone number is automatically dialled for you.
BASIC FEATURES Assigning a Name to the Speed Dial Button. A name of 11 characters can be assigned for each speed dial button. This name is used to dial the telephone number using the directory feature. 1. Press the [Transfer] button. 2. Dial [1] [0] [6]. 3. Press the speed dial number location to be assigned with a name(00-49). 4. Enter a name. Refer to the ‘Things You Should Know’ in this manual for how to enter a letter. 5.
BASIC FEATURES Programming One-touch Speed Dial Buttons You can assign a frequently used number from the speed dial numbers to one of the programmable keys on the Digital phone for one touch speed dial use. 1. Without lifting up the handset, press the [Transfer] button. 2. Dial [1] [0] [7]. 3. Locate a vacant [SPD] button using "] button and press the [Volume" the right Soft button. 4. Dial the speed dial number location(00-49 or 500-999) to be assigned for this button. 5.
BASIC FEATURES Using Chain Dialling After a speed dial number is pressed, additional numbers can be dialled manually [Memory] or you can chain together speed dial numbers. After the first speed dial number, press the [Memory] button or dial [1] [6] and then dial other speed dial number location. Or after the speed dial number is pressed, dial the additional numbers manually. Conference Calls You can make a conference call of up to 5 parties including yourself.
BASIC FEATURES 4. To drop a person from your conference call, press the [Conference] button and dial the extension or trunk number that is to be dropped. Press the [Conference] button again to re-establish the conference. - When attempting to add another person to the conference and you are not able to reach the desired person, simply press the [Conference] button again. NOTE Programming Conference Groups. 1. Press the [Transfer] button. 2. Dial [1] [1] [8]. © SAMSUNG Electronics Co., Ltd.
BASIC FEATURES 3. Select the required Conference Group !Volume" "] button number by using the [! and press the right Soft button. 4. Select ‘Name’ and press the right Soft button to enter the Conference Group name. Refer to the ‘Things You Should Know’ in this guide for entering characters. Press the right Soft button to save the name. 5. Using the [! !Volume" "] button to select [MBR1~4] and press the right Soft button. 6.
CONVENIENT FEATURES 1. Do Not Disturb When Do Not Disturb is registered, you can block incoming calls to your digital phone yet still use the digital phone for outgoing calls. Setting Do Not Disturb 1. Press the [DND] button or dial [4] [0] [1] while on-hook, or select [DND] from the LCD screen using the Scroll button and [Other] Soft button. 2. The status indicator and/or [DND] button LED flashes to inform you that the Do Not Disturb mode is set.
CONVENIENT FEATURES Cancelling Do Not Disturb The procedure for cancelling the Do Not Disturb mode is described below. 1. Check if the status indicator is flashing. 2. Press the [DND] button or dial [4] [0] [0]. 3. The status indicator goes off. One Time DND If you do not wish to be disturbed while you are on a call, press the [DND] button and set the station to Do Not Disturb. When you complete the call, the Do Not Disturb mode is automatically cancelled and new calls will be received.
CONVENIENT FEATURES 2. Call Forwarding This section explains various call forwarding features available on your OfficeServ system. Call Forward Option You can verify or change the Call Forward settings and the number specified for forwarding from the LCD screen of your digital phone. Enabling Call Forwarding can also be achieved using the dial buttons or the Forward Set Menu. 1. Press the [Transfer] button. 2. Dial [1] [0] [2]. 3.
CONVENIENT FEATURES 5. Dial the station, station group, or external number remembering to insert the trunk access code prior to the external number. 6. Press the right Soft button to move the cursor. 7. Dial [1] to enable call forwarding to the !Volume" "] destination, or press the [! button and select between [YES] or [NO]. 8. Press the [Transfer] button to save and exit. Page 72 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Forwarding Calls You can forward calls to another station, station group, or an external number. Programming procedures for various types of forwarding calls are described in detail next. If your digital phone has the FWD ALL, FWD BUSY, and FWD NO ANSWER FWD BUSY/NO ANSWER buttons, you can forward calls by pressing one of these buttons. In this case, a red LED is lit on the button indicating which call forward option is enabled.
CONVENIENT FEATURES Forwarding All Calls You can forward all your calls to another internal, station group or external number. 1. Dial [6] [0] [1]. 2. Dial the station number, group number, or external number. Remember to insert the trunk access code prior to entering the external number. 3. Hang up after the confirmation tone is received. NOTE Page 74 - The station receiving a forwarded call can transfer the call back to the forwarding station.
CONVENIENT FEATURES Forward Busy When you are busy on a call, incoming calls can be forwarded to another station, station group or an external number. 1. Dial [6] [0] [2]. 2. Dial the station number, group number, or external number. Remember to insert the trunk access code prior to entering the external number. 3. Hang up after the confirmation tone is received. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Forward No Answer Calls can be forwarded when you are not available to answer the call. 1. Dial [6] [0] [3]. 2. Dial the station number, group number, or external number. Remember to insert the trunk access code prior to entering the external number. 3. Hang up after the confirmation tone is received. Page 76 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Forward Busy / No Answer When the Forward Busy(FWD BUSY) and Forward No Answer(FWD NOANS) destinations are both set, you may enable both these options simultaneously. When you are busy, calls will be transferred to the number specified in Forward Busy destination. If you do not answer, the calls will be forwarded to the Forward No Answer destination. 1. Dial [6] [0] [4]. 2. Hang up after the confirmation tone is received. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Forward When DND is Set You can set a forward destination for those times you need to set Do Not Disturb. 1. Dial [6] [0] [5]. 2. Dial the station number, group number, or external number. Remember to insert the trunk access code prior to entering the external number. 3. Hang up after the confirmation tone is received. When you enable DND on your digital phone, all calls will be forwarded to the destination set above. Page 78 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Forward Follow Me All incoming calls to your digital phone can be forwarded to the station you are currently using. In addition, you can arrange for calls to another station to be forwarded to your digital phone (Remote Forwarding). To forward all calls to your digital phone to the station you are currently using : 1. Dial [6] [0] [6] at the station you are using. ‘enter the station to follow from’ is displayed. 2. Dial the station number of your digital phone. 3.
CONVENIENT FEATURES To forward calls from a specific station to your digital phone (Remote Forwarding) : 1. Dial [6] [0] [6]. ‘enter the station to follow from’ is displayed. 2. Dial the station number. 3. Hang up after the confirmation tone is received. Page 80 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 3. Paging and Messaging This section explains how to use the OfficeServ paging and messaging functions. NOTE - You must use the digital phone handset when paging. - If you are a frequent user of paging you can have a dedicated page zone button as one of your programmable buttons, making it unnecessary to press the [PAGE] button followed by the zone number. Internal Page You can make a page announcement through the station speakers. There are 5 internal zones 0-4. 1.
CONVENIENT FEATURES 5. Hang up after paging. External Page You can page externally through optional external speakers. There are 4 external zones 5-8 and [9] for all external zones. 1. Pick up the handset and check for dial tone. 2. Press the [PAGE] button or [5] [5], or select [PAGE] from the LCD screen by using the Scroll button and Soft buttons. 3. Select a zone number from [5], [6], [7], and [8], or page all external zones by dialling [9]. 4.
CONVENIENT FEATURES 5. Hang up after paging. All Page You can also page all external zones and internal page zone 0 simultaneously. 1. Pick up the handset and check the dial tone. 2. Press the [PAGE] button or [5] [5], or select [PAGE] from the LCD screen by using the Scroll button and Soft buttons. 3. Press the [*] or [ALL PAGE] button. 4. Start your announcement after receiving confirmation tone. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 5. Hang up after paging. Meet Me Page : MMPG 1. Pick up the handset and check for dial tone. 2. Press the [MMPG] button or [5] [4], or select [MMPG] from the LCD screen using the Scroll button and Soft buttons. 3. Dial the required zone number. 4. After receiving the confirmation tone instruct the other party to press [5] [6]. Page 84 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 5. Press the [WAIT] or [Transfer] button. 6. Hold the handset until the other party enters the page answer code([5] [6]). 7. The call is automatically connected when the other party enters the page answer code. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Call Park and Page You can transfer an external call to another person by parking the call and notifying the other person of the call via paging. This function is useful in a factory or in a large office when the called person is away from their workstation. Call Park and Page 1. Press the [PAGE] button while connected to the call and the call is automatically on hold. You can also select [PAGE] from the LCD screen using the Soft button. 2.
CONVENIENT FEATURES Retrieving the parked call 1. Press the [PARK] button or dial [1] [0], and enter the announced number. You can also enter the announced number after selecting [PARK] from the LCD screen. 2. You will be connected to the Parked call. NOTE - If the parked call is not retrieved within the pre-programmed time, the parked call will recall to your digital phone, an amber light will blink slowly on the Call or trunk button LED. You cannot park and page intercom calls.
CONVENIENT FEATURES Rejoining a Page With this option, you can listen to the latter part of a page announcement after finishing a call. 1. Press the [Transfer] button or [1] [1] [0]. 2. Dial [0] [5] [1] to enable this option, and [0] [5] [0] to disable it. 3. Press the [Transfer] button to save the setting. Page 88 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Setting a Message Indication You can leave a message indication when there is no answer or if the station required is busy. 1. Press the [Message] button or dial [4] [3]. 2. Hang up after hearing confirmation tone. 3. The [Message] button of the receiving station will flash. digital phones without the [Message] button will receive special dial tone as a message indicator. The status indicator will also flash red. - You can leave up to 5 messages on a station.
CONVENIENT FEATURES Cancelling Messages You can cancel messages you have left on other stations or messages left at your station. 1. Dial [4] [2] and enter the station number where you left your message. 2. To cancel all numbers left at your station, dial [4] [2] and enter your station number. The LED on your [Message] button and the status indicator will go out. Page 90 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Returning Messages 1. Press the [Message] button to review the stations that have left messages and press the Soft button associated with [Dial] on the LCD screen to call the station. Or, dial [4] [3] and the first station that left its number will be rung automatically. 2. The LED on your [Message] button and status indicator will remain flashing until the station responds. Repeat the above steps to respond to all station messages received. 3.
CONVENIENT FEATURES Viewing Message Indication You can view all messages before returning them. 1. Press the flashing [Message] button. The first station that left its number is displayed on the screen. 2. Press the [! !Volume" "] button to scroll through the messages. 3. Use the Soft buttons to return or cancel the message or to move to the next message. 4. Press the [Speaker] or [End] button after responding to the message left. Page 92 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Programmed Messages You can leave a programmed message on your station when you are away from your digital phone. The caller will see the message on their LCD when they call you and know that you are not available. 15 system wide messages are available(01-15) and 5 personal messages(16-20) 1. Dial [4] [8] and select the desired message code from the programmed message list. 2. Dial [4] [8] then [0] [0] to cancel the message. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Programmed Message List When you are away for a certain period of time, you can leave a message of absence on stations by selecting a message accordingly. The caller will see the message and know that you are away.
CONVENIENT FEATURES 4. Alarm Features Appointment Reminder / Alarm Clock This feature serves as an alarm clock. Up to 3 alarms may be set. Each alarm can be set as a one time alarm or a daily alarm. Three short rings will repeat three times. Lift the handset to answer the alarm. If you do not answer, the alarm will ring two more times at 5-minute intervals. 1. Press the [Transfer] button. 2. Dial [1] [1] [2]. 3. Dial the alarm number [1], [2] or [3]. 4.
CONVENIENT FEATURES 5. Select the type of alarm between [0](Not Set), [1](Today) or [2](Daily). 6. Press the [Transfer] button to save settings. Repeat the above steps to set other alarms as needed. Alarm Cancel Procedure for cancelling all previously registered alarms is described below. 1. Press the [Transfer] button. 2. Dial [1] [1] [2]. 3. Dial the alarm number [1], [2] or [3]. Page 96 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 4. Press the [Hold] button. - You can view the alarm message on the LCD screen. Refer to the next paragraph ‘Alarm Message’ for details. NOTE Alarm Message You can make a 16-character message to be associated with an alarm. 1. Press the [Transfer] button. 2. Dial [1] [1] [6]. 3. Dial the alarm number [1], [2] or [3]. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 4. Enter the time at which you want the alarm to sound. Enter the time as HHMM(hours and minutes) based on a 24-hour clock. 5. Select the type of alarm between [0](Not Set), [1](Today) or [2](Daily). 6. Enter the message using the dial buttons. Refer to ‘Things You Should Know’ of this guide for procedures on entering characters. 7. Press the [Transfer] button and save the alarm time and message. Repeat the above steps to set other alarms and messages when needed.
CONVENIENT FEATURES Alarm Message Cancel You can verify or change the Alarm settings from the LCD screen of your digital phone. Cancelling alarms can also be achieved using the dial buttons. 1. Press the [Transfer] button. 2. Dial [1] [1] [2]. 3. Dial the alarm number [1], [2] or [3]. 4. Press the right Soft button twice. 5. Press the [Hold] button to cancel. - You can view the alarm message on the LCD screen. Refer to the above section ‘Alarm Message’ for details. NOTE © SAMSUNG Electronics Co.
CONVENIENT FEATURES 5. Use with the Door Phone Answering The Door Phone You can answer calls from the Door Phone or open the door if an optional electric door lock is installed. 1. When a call from the Door Phone arrives, you will receive three short bursts of ring, repeated. 2. Lift the handset or press the [Send] button to connect to the Door Phone. 3. If an electric door lock is installed, you can open the door by dialling [1] [3]. Page 100 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Calling The Door Phone / Room Monitor You can call the Door Phone and listen to what is happening outside or in another room. 1. Dial the station number of the Door Phone. 2. You can listen or have a conversation when you are connected to the Door Phone. 3. If an electric door lock is installed, you can open the door by dialling [1] [3]. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 6. Executive / Secretary Hot Line ! An Executive and secretary can have a hotline set up between their stations. When the Executive is in DND mode or busy on a call, all new calls will forward to the secretary station. 1. Either the Executive or the secretary can make a call to the other station by pressing the [BOSS] button or by selecting [BOSS] [BOSS] from the LCD screen using the Soft buttons. 2.
CONVENIENT FEATURES 7. Group Listening While you are in a call, you can allow others to hear the conversation through the phone speaker. 1. Turn on the speaker by pressing the [LISTEN] button, or selecting [LISTEN] from the LCD screen using [LISTEN] the Soft button. The microphone of the digital phone is not active and the other party cannot hear sounds via that source. 2.
CONVENIENT FEATURES 8. Account Code If specified by programming, at any stage you can print out the account code along with the call history to allow calls to be charged to specific account code. To enter an Account Code: 1. Press the [ACCT] button or select [ACCT] using the Soft button during [ACCT] an external trunk call. 2. Dial the account code(Maximum 12 characters including [#]). 3. Press the [ACCT] button again or select [ACCT] using the Soft button.
CONVENIENT FEATURES 9. Locking Your digital phone You can lock your digital phone to prevent others from using your it while you are away. You can unlock the digital phone when you return. 1. Press the [Transfer] button. 2. Dial [1] [0] [0]. 3. Dial your 4-digit station passcode. 4. Dial [2] to lock all calls to and from your digital phone, [0] to unlock, and [1] to lock the digital phone from making outside calls only. 5. Press the [Transfer] button to save the settings. © SAMSUNG Electronics Co.
CONVENIENT FEATURES 10. Off-Hook Voice Announcement You can make a separate announcement to a station user currently on a call. This is not heard by the other party. This feature is useful when you have an urgent message to deliver. You cannot receive [OHVA] calls in DND mode. The [OHVA] feature can be used for intercom and transferred calls. OHVA Follow the below procedure to make an off-hook voice announcement. 1. Dial the extension number or [DSS] the [DSS] button. 2.
CONVENIENT FEATURES OHVA Cancel When receiving OHVA, you will hear the OHVA through your handset or speaker depending on which one you are using. In both cases, you can continue your call with the original party whilst listening to the OHVA. You can also talk to the announcing party, temporarily putting the other party on hold. 1. Press the flashing [CALL] button. This places the original party on hold and allows you to talk to the announcing party. 2.
CONVENIENT FEATURES 11. In Group / Out Of Group If your digital phone is assigned to a station group, you can remove your digital phone from the group or re-enter your digital phone to the group. When your digital phone is removed from the group, you will not receive calls to the station group, only calls to your station number. 1. Press the [IN/OUT] button, or select [IOG] from the Other menu on LCD screen using the [Scroll] button and Soft buttons.
CONVENIENT FEATURES 12. Mute This feature disables the handset or digital phone’s microphone, depending on which is in use. Thus, the other party cannot hear what you are saying. 1. Press the [MUTE] button or select [MUTE] from the LCD screen using the Soft button. The LED of the [Mute] button flashes. 2. Press the [MUTE] button again to cancel. The red light on the LED of the button goes off. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 13. Background Music You can listen to music through the digital phone’s speaker if a music source is provided. 1. To listen to the music, press the [Hold] button while on-hook. 2. Press the [Hold] button again to cancel. 3. Use the [! !Volume" "] button to adjust the music Volume. This does not affect the speaker volume setting. Page 110 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 14. Timer Call Duration Timer You can set the timer to be activated automatically for external calls. The timer appears on the LCD screen immediately on answering an incoming call and after a period of time or when the other party answers an outgoing call. The call duration time is displayed in minutes and seconds, and is reset when the call lasts longer than 100 minutes. Selecting [TIMER] from the LCD screen will manually reset the timer.
CONVENIENT FEATURES Auto Timer Your digital phone may have an automatic timer that starts automatically after a short period of time for forwarded and outgoing calls. This can be enabled or disabled as follows. 1. While on-hook, press the [Transfer] button. 2. Dial [1] [1] [0]. 3. Dial [0] [1] [1] to activate the auto timer or [0] [1] [0] to deactivate. 4. Press the [Transfer] button to save the settings. Page 112 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES Timer Function For digital phones, the timer can be used as a stopwatch. 1. Press the [TIMER] button, or select [TIMER] from the Other menu on the LCD screen using the [Scroll] button and Soft button when the digital phone is in idle mode. 2. Press the [TIMER] button again to stop the timer. 3. Note the elapsed time on the LCD screen. 4. Lift and replace the handset and the time and date display on the LCD will resume. © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES 15. Ring Preference You can answer a call automatically by lifting the handset or by pressing the [Send] button. Calls are answered in the order that they arrive at your digital phone. If the ring preference option is off, you must answer calls by pressing the flashing button. In this case you may answer the calls without regard to the order in which they arrived. 1. Press the [Transfer] button. 2. Dial [1] [1] [0]. 3. Dial [0] [6] [1] to enable the ring preference feature.
APPLICATION MENUS 1. Navigation Buttons The DS-5021D and DS-5014D digital phones are equipped with navigation buttons for convenient use of the digital phone functions. This chapter introduces the functions available using the navigation buttons and procedures for using the various applications. Menu Button The main menu is displayed when the [Menu] button is pressed in the idle state, You can select from the presented options.
APPLICATION MENUS Send Button If you press the [Send] button while the [OUT CALL LOG], [IN CALL LOG], [SPD NO. SEARCH], or [DIRECTORY DIAL] function is selected, the corresponding number will be dialled. ! If you press the [Send] button in idle mode, you enter the [OUT CALL LOG] menu. ! If you press the [Send] button in dial mode, you enter the [OUT CALL LOG] menu regardless of the numbers previously dialled.
APPLICATION MENUS Direction button These buttons are used when editing menu entries, or when moving between menu items. 1[ ] button is used - Used for moving to the previous menu. 2[ ] button is used Enter - In cases where the phone number is long, this button is used for displaying the rear part of the number which is not displayed on the LCD screen. 3[ ] button is used - Used for moving to the next menu.
APPLICATION MENUS 2. Main Menus Press the [Menu] button to display the main menu below. How to Select Items To select a menu items, you can use the navigation direction buttons, volume button or the dial buttons. ! ∧]/[∨] direction buttons or the [! !Volume" "] button and move to Use the [ the preferred menu. ! You can select the menu directly by pressing the dial button corresponding to the menu number. ! Press the [Enter] button to select the menu underlined by the cursor to expose submenus.
APPLICATION MENUS 3. Reviewing and Calling Recently Called Numbers Up to 50 recently called numbers can be saved. The actual number is allocated by your System Administrator. You can verify recently called numbers and redial them as required. 1. Press the [Menu] button to display the main menu screen. 2. Dial [1] to select [1. OUT CALL LOG] or select and press the [Enter] button 3. The list of recently called numbers is displayed.
APPLICATION MENUS 4. Reviewing and Calling Recently Received Numbers Up to 50 recently received numbers can be saved. The actual number is allocated by the System Administrator. You can verify recently called numbers or dial them as required. 1. Press the [Menu] button to display the main menu screen. 2. Dial [2] to select [2. IN CALL LOG], or select and press the [Enter] button 3. The list of recently received numbers is displayed.
APPLICATION MENUS 5. Reviewing and Calling Speed Dial Numbers You can review or call a speed number you have personally programmed or system speed number programmed in the OfficeServ system. The System Administrator can program the system speed numbers and names. 1. Press the [Menu] button to display the main menu screen. 2. Dial [3] to select [3. SPD NO. SEARCH]. 3. Dial [1] to select [1. PERSON SPD NO.] or dial [2] to select [2. SYSTEM SPD NO.]. 4. The saved speed dial number list appears.
APPLICATION MENUS 6. Reviewing and Calling Numbers by Name Using the OfficeServ system’s internal directories you can review by name and then call personal or system speed dial numbers or internal station numbers. The System Administrator can program system speed numbers and names. 1. Press the [Menu] button to display the main menu screen. 2. Dial [4] to select [4. DIRECTORY DIAL] or select and press the [Enter] button. The submenu below is displayed. 3. Dial [1] to select [1. PERSON SPD NO.
APPLICATION MENUS 7. Setting Forward Type and Number When you are unavailable to answer your calls on the DS-5021D or DS-5014D digital phone, you can set the forwarding function to have the calls answered at another station, station group or external number. Procedures for setting the forward type and numbers are described below. 1. Press the [Menu] button to display the main menu screen. 2. Dial [5] to select [5. FORWARD SET] or select and press the [Enter] button. 3.
APPLICATION MENUS 5. Select the forward type you wish to set. Dial [0] to select [0. FORWARD TYPE]. The current forward setting is displayed. 6. Select the required forward type to be set by using the [∧]/[∨] direction button, the [!Volume"] button and press the [Enter] button, or by pressing the dial button corresponding to the forward type. [0. FORWARD CANCEL] cancels your previous setting. 7. Press [End] to return to the idle screen Page 124 © SAMSUNG Electronics Co., Ltd.
APPLICATION MENUS 8. Setting Alarm Reminders This function works like an alarm clock and is useful to remind you of upcoming appointments. You can set the time and type of alarm for up to three alarms. 1. Press the [Menu] button to display the main menu screen. 2. Dial [6] to select [6. ALARM REMINDER]. The submenu below is displayed. 3. Use the [∧]/[∨] direction button or the [!Volume"] button and press the [Enter] button, or select the dial button corresponding to the alarm number you wish to set. 4.
APPLICATION MENUS 5. The submenu for the three alarm types is displayed as shown. ∧ ∨ Use the [ ]/[ ] direction buttons, the[!Volume"] button, or the dial buttons to select to select the alarm type, and press the [Enter] button. [0. NOT SET] the alarm does not ring. [1. TODAY] the alarm rings only once at the set time when selected. [2. DAILY] an alarm rings every day at the set time when selected. The selected alarm type is saved and you move to the upper menu displaying the submenu shown below. 6.
ANNEX 1. Troubleshooting Possible problems and troubleshooting steps for your digital phone are described below. Check the troubleshooting steps before contacting your Authorised Samsung Reseller. ? Dial tone is not heard when you lift the handset or press the [Speaker] button. ! Check if the handset and phone line are connected to the handset connection port and phone line connection port of the digital phone properly.
ANNEX ? Caller IDs are not displayed on the LCD screen. ! Confirm with your System Administrator that the caller ID service is available from your Telephone Company. ! If the caller blocks the sending of their caller ID, the caller ID will not be displayed. ! If the caller makes a call from an area where the caller ID cannot be provided (e.g., international calls), the caller ID will not be displayed. ! If the caller makes a call from a public phone, the caller ID will not be displayed.
ANNEX 2. Product Specifications The specifications and features of the DS-5021D/5014D digital phone are as follows. Item Model Weight(kg) Size(mm) Specification DS-5021D DS-5014D 1.1 1.1 266(width) X 206(length) X 119(height) Operating Temperature(°°C) 0 to 45 10 to 90 non condensing Operating Humidity(%) Number of the [Programmable] buttons 21 14 Navigation Button Yes Speakerphone Yes LCD © SAMSUNG Electronics Co., Ltd.
ANNEX This page is intentionally left blank. Page 130 © SAMSUNG Electronics Co., Ltd.