User Manual

DSR 9500A FTA, CI, EM VIA, VIA CI
GB-26
DIGITAL SATELLITE RECEIVER
DSR 9500A FTA, CI, EM VIA, VIA CI
GB
GB-27
4.3 Media Settings
You can set the various media settings you want.
Place the cursor on this sub menu and press .
● Select the TV system : PAL, SECAM.
● Select the TV type according to your TV: STANDARD
4: 3 ratio or WIDE SCREEN 16 : 9 ratio type.
● Select the aspect ratio conversion :
Letter box, Pan & Screen, Mixed or Full.
● Select the Video Signal Type :
Composite+RGB or Composite.
● Select the RF Channel. ● Select Broadcasting System : B/G, I or D/K.
4.4 Modem Setting
● Modem Type: Please choose your modem type
External or Advance External.
● Prefix: If you are using extension line,
please enter prefix number.
● Dialing: Please choose between Tone
and Pulse.
4.5 Time & Timer Setting
● Place the cursor on this sub menu and press .
● Press the / , / keys to change the Local
time in Time Zone.
The local time will be changed according to your
location.
● Press the / keys to choose event repetition
you want to reserve :
Daily, Every Sunday, Every Monday, Every Tuesday,
Every Wednesday, Every Thursday, Every Friday,
Every Saturday, Once.
● Press the Numerical ( ~ ) keys to set the time you want
and press the / keys to choose a switch time
you want to reserve.
● Select TV program to set the event program by
pressing / keys.
When you press the TV/RADIO key, TV program and Radio
program are toggled.
4. System Setup
This option enables you to change the factory
preset system settings as per your requirements.
4.1 Language Selection
The "Language Selection"option allows the user to
select the desired language of the OSD, Soundtrack,
Teletext, Subtitle or EPG.
● To accommodate user from different regions
speaking different languages.
● To select the desired language menu,
press / keys to change language and press .
● The OSD Language, Soundtrack, Teletext, Subtitle,
or EPG will vary according to the selected language.
4.2 OSD Setting
You can set the OSD transparency and the display time.
● Select OSD Transparency type.
The OSD Transparency level from 0 to 100%.
● Set the display duration of the information(banner)
box displayed in the screen.
The time ranges from 0.5 to 60.0 seconds.
● Place the cursor on the position you want,
and press the UP/DOWN keys or LEFT/RIGHT keys
until the screen moves to the position you want.
The screen will move to the position you want.
OPERATING THE RECEIVEROPERATING THE RECEIVER
DSR 9500A_GB_10.12 11/23/02 9:33 AM Page 26