User manual
Table Of Contents
- Health and safety information
- Basic troubleshooting
- Quick reference
- Contents
- Basic functions
- Extended functions
- Shooting options
- Playback/Editing
- Wireless network
- Connecting to a WLAN and configuring network settings
- Saving files to a smart phone automatically
- Sending photos or videos to a smart phone
- Using a smart phone as a remote shutter release
- Using Auto Backup to send photos or videos
- Sending photos or videos via email
- Using photo or video sharing websites
- Using Samsung Link to send files
- Settings
- Appendixes
Playback/Editing
94
Transferring les to your Windows OS computer
Connect the camera to your computer as a removable disk.
Your computer must be running Windows 7 or Windows 8 for you to connect the
camera as a removable disk.
1
On the Home screen, scroll to <Basic>.
2
Select .
3
Select Connectivity → i-Launcher → O.
4
Turn o the camera.
5
Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your les. The manufacturer is not responsible for any
loss of data.
6
Turn on the camera.
The computer recognizes the camera automatically.
7
On your computer, select My Computer → Removable Disk →
DCIM → 100PHOTO.
8
Drag or save les to your computer.
Disconnecting the camera (for Windows 7)
With Windows 8, the methods for disconnecting the camera are similar.
1
If the status lamp on your camera is blinking, wait until it stops.
2
Click on the tool bar at the bottom right of your computer
screen.
3
Click the pop-up message.
4
Click the message box that indicates the camera can be removed
safely.
5
Remove the USB cable.
Transferring les to the computer
Connect the camera to a computer to transfer les from the camera’s memory card to the computer.