Dryer User manual DV22K6800** DV6800K_DC68-03650A-08_EN.
Contents Contents Safety information 4 What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions 4 4 5 5 7 7 Before installation 9 Key installation requirements Location considerations Ducting requirements Exhausting requirements Electrical requirements 9 9 12 13 14 Installation 16 What’s included Step-by-step installation Exhaust ducting guide Changing the direction of the exhaust duct (optional)
41 Cleaning 41 Troubleshooting 42 Checkpoints Information codes 42 45 Specifications 46 Fabric care chart Protecting the environment Specification sheet Cycle chart 46 47 48 49 Contents Maintenance English 3 DV6800K_DC68-03650A-08_EN.
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. Safety information What you need to know about the safety instructions Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
CALIFORNIA PROPOSITION 65 WARNING Safety information WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. WARNING - Risk of Fire • • • • • • Clothes dryer installation must be performed by a qualified installer. Install the clothes dryer according to the manufacturer’s instructions and local codes. Do not install a clothes dryer with flexible plastic venting materials.
Safety information Safety information 7. Do not reach into the appliance if the drum is moving. 8. Do not install or store this appliance where it will be exposed to the weather. 9. Do not tamper with internal controls. 10. Do not repair or replace any part of the appliance or attempt any service unless specifically recommended in the user-maintenance instructions or in published userrepair instructions that you understand and have the skills to carry out. 11.
WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed.
Safety information • Safety information • • • • • • • • • • Do not use fabric softeners or products to eliminate static unless the softener or product is recommended for dryer use by the manufacturer of the fabric softener or product. Clean the lint screen before or after each load. Keep the area around the exhaust opening and surrounding areas free from lint, dust, and dirt. The interior of the dryer and exhaust duct should be cleaned periodically by qualified service personnel.
Before installation Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. Before installation Key installation requirements • • • A grounded electrical outlet.
Before installation NOTE When the exhaust duct is installed at the rear of the dryer, the rear must have at least 5.5 inch (140 mm) clearance. Before installation 5.5” (140 mm) Side by side installation A A B C D B A E F A* 1 in. (25 mm) D 25.8 in. (655 mm) B 23.6 in. (600 mm) E 1 in. (25 mm) C 1 in. (25 mm) F 3 in. (76 mm) *This Clearance is not applicable to standalone dryer. 10 English DV6800K_DC68-03650A-08_EN.
Stacked installation (Model: SK-DH) E A B Before installation F C D G H J I K A 3 in. (76 mm) G 1 in. (25 mm) B 48 in². (310 mm²) H 23.6 in. (600 mm) C 24 in². (155 mm²) I 1 in. (25 mm) D 3 in. (76 mm) J 27.1 in. (688 mm) E 6 in. (152 mm) K 3 in. (76 mm) F 67 in. (1702 mm) WARNING Samsung’s washers and dryers can be stacked to maximize usable space. You can purchase an optional stacking kit from your Samsung retailer. English 11 DV6800K_DC68-03650A-08_EN.
Before installation Ducting requirements Recommended Use only for short-run installation 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° elbows Rigid Rigid 0 80 ft. (24.2 m) 60 ft. (28.3 m) 1 60 ft. (28.3 m) 45 ft. (13.7 m) 2 45 ft. (13.7 m) 35 ft. (10.7 m) 3 35 ft. (10.7 m) 25 ft. (7.6 m) Before installation Weather hood type NOTE * Use a 4-inch (10.2 cm) diameter rigid aluminum or galvanized steel duct.
Exhausting requirements Outside the United States and Canada • WARNING • In the United States and Canada • • • • • • • All dryers must be exhausted to the outside. The required exhaust duct is 4 inches (10.2 cm) in diameter. See “Ducting requirements” in the “Installation” section for the maximum duct length and number of bends that can be used. The total length of flexible metal duct must not exceed 7’ 10½” (2.4 m).
Before installation Electrical requirements The wiring diagram is located on the plate under the control panel or rear frame. • WARNING Before installation • • Improperly connecting the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether your dryer is properly grounded.
U.S. only Canada Only Most U.S. dryers require a 120 / 240 volt, 60 Hz AC approved electrical service. Some require 120 / 208 volt, 60 Hz approved electrical service. The electric service requirements can be found on the data label located behind the door. A 30-ampere fuse or circuit breaker on both sides of the line is required. A 120 / 240 volt, 60 Hz AC approved electrical service fused through a 30-ampere fuse or circuit breaker on both sides of the line is required.
Installation This dryer must be installed by a qualified technician. The installer is responsible for connecting the dryer to the main power while observing the relevant safety regulations of your area. What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the accessories, contact a local Samsung service center or the retailer.
Accessories & tools Provided accessories DRYER STACKING KIT Cover Plate Installation Stacking Kit (Canadian models only) Required tools Pliers Cutting knife Nut driver Philips screwdriver Duct tape Wrench Level WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach. English 17 DV6800K_DC68-03650A-08_EN.
Installation Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Install the exhaust system 1. Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer. 2. To change the door direction, see “Switching the door position”. 3. Install the exhaust system as instructed in the “Exhaust ducting guide” section.
STEP 2 Connect the electrical wiring First, read through the “Electrical requirements” section, and then follow the instructions on this page or the next page. Instructions for a 3-wire system are on this page. Instructions for a 4-wire system are on the next page. For a 3-wire system A Loosen or remove the screws from the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block. Tighten the screws.
Installation For a 4-wire system Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. 1. A CAUTION • D B Installation E C • F A. Center silver-colored terminal block screw 2. Loosen or remove the screws from the center terminal block. 3. Connect the neutral wire (white or center wire) and ground wire (white) to the center, silver-colored terminal screw of the terminal block. Tighten the screw. 4.
• • • • Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block. A strain relief must be used. Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8” (1 cm) deep well socket. STEP 3 Level the dryer To ensure optimal performance, the dryer must be level. A Installation Using a level (A), check if the dryer is level side to side and then front to back.
Installation STEP 4 Final Check When installation is complete, confirm that: • • • • • The dryer is plugged into an electrical outlet and grounded properly. The exhaust ductwork is connected and the joints are taped. You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct. The dryer is level and is sitting firmly on the floor. The dryer starts, runs, heats, and shuts off properly. Installation Exhaust ducting guide Ducting 1.
Changing the direction of the exhaust duct (optional) WARNING Before performing this exhaust installation, disconnect the dryer from its electrical supply. Wear gloves to protect your hands and arms from sharp edges when working inside the cabinet. Side venting A Detach the right (A) or left (B) side knockout as desired. 2. Pull the duct out of the dryer, and then remove the screw (C) from the duct. Set screw (C) aside. You will need it in a later step. 3.
Installation 4. Reconnect the cut portion of the duct (D), and then fasten it to the ramp on the appliance base with the screw (C) which you set aside in Step 2. 5. Connect a duct to an elbow, and then tape the duct and the elbow together with duct tape. 6. Insert the duct with elbow (E) through the rear opening, and then connect it to the internal duct. C D Installation CAUTION E Wire components in the dryer may interfere slightly with the duct.
8. Cover the back opening with a cover plate (G). WARNING Never leave the back opening uncovered. It must be covered with a cover plate. G Installation Bottom venting 1. Detach the bottom knockout (A). 2. Pull the duct out of the dryer, and then remove the screw (B) from the duct. Set screw (B) aside. You will need it in a later step. 3. Cut the duct as shown and keep the cut portion of the duct (C). A B C 4.9"(125 mm) English 25 DV6800K_DC68-03650A-08_EN.
Installation 4. Reconnect the cut portion of the duct (C), and then fasten it to the ramp on the appliance base with the screw (B) which you set aside in Step 2. 5. Insert the elbow (D) through the rear hole and connect it to the duct (C). 6. Rotate the elbow (D) through the bottom opening. B C Installation D C CAUTION Do not to pull or damage the electrical wires inside the dryer when inserting the duct. D 7. Apply duct tape (E) on the joint as shown.
8. Cover the back opening with a cover plate (F). WARNING Never leave the back opening uncovered. It must be covered with a cover plate. F Installation English 27 DV6800K_DC68-03650A-08_EN.
Installation Switching the door position To reverse the direction of the door, we recommend that you contact a qualified technician. Unplug the power cord of the dryer. 2. Remove the two hinge screws from the door, and then remove the door by lifting it up slightly. 3. Remove the two screws on the opposite side of the door hinge. Installation 1. 28 English DV6800K_DC68-03650A-08_EN.
Locate and remove the 9 screws from the door as shown. 5. Remove the door lever. 6. Remove the door frame. Installation 4. English 29 DV6800K_DC68-03650A-08_EN.
Installation Rotate the door glass 180°. 8. Reassemble the door frame and the door lever. Installation 7. 30 English DV6800K_DC68-03650A-08_EN.
9. Move the location of the screw, used to fix the door hinge, as shown. Installation 10. Remove the lever cover by pressing the hook on it. 11. Put the lever holder on the other side as shown. English 31 DV6800K_DC68-03650A-08_EN.
Installation 12. Insert and tighten the two hinge screws. Installation 13. Insert and tighten the two screws on the opposite side of the door hinge. 32 English DV6800K_DC68-03650A-08_EN.
Before you start Here are a few things you should know before starting your dryer. Sort and load • • • • Put one wash load in the dryer at a time. Do not mix heavy and lightweight items together. To improve drying efficiency for one or two items, add a dry towel to the load. For best results, untangle items before inserting them into the dryer. • • • • Overloading reduces the tumbling action, resulting in uneven drying and wrinkling.
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the “Safety information“ before operating this appliance. Feature panel 02 08 01 10 09 11 03 04 05 06 07 Operations 01 Cycle selector Turn the cycle selector to select a desired cycle. When a cycle is selected, the cycle indicator lights up. 02 Digital graphic display Displays all cycle information, including the cycle time, information code, operating status, and indicators.
Press to change the temperature of the current cycle. • • 04 Temp. • • • High: For sturdy cottons or those labeled Tumble Dry. Medium: For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium. Med Low: For heat lower than Medium. Use to dry synthetic or washable knit fabrics. Low: For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm. Extra Low: Provides the lowest heated drying temperature possible.
Operations Indicators Drying in progress Drum Light Cooling in progress Sound Off Wrinkle Prevent in progress Child Lock Cycle is complete My Cycle Filter Check Mixed Load Bell Simple steps to start 1. Press Power to turn on the dryer. 2. Turn the Cycle Selector to select a cycle. Operations 3. Change the cycle settings (Dry Level, Temp., and Time) as necessary. 4. Optionally, you can activate options available by pressing the relevant button (Adjust Time, Wrinkle Prevent and/or Mixed Load Bell).
Cycle overview Sensor Dry Sensor Dry cycles sense moisture in the load and stop the dryer when the load reaches the dryness level you have selected with Dry Level. Description NORMAL For most fabrics including cottons and linens. HEAVY DUTY For drying items made out of heavy fabrics, such as jeans, corduroys, or work clothes, with high temperature heat. SANITIZE Use to sanitize items by applying high-temperature heat to the fabric. This cycle can make items soft and reduce smells.
Operations Cycle guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Cycle Description Bedspreads & Comforters Follow the care label instructions or dry using NORMAL. • Make sure the item is thoroughly dry before using or storing. • May require repositioning in the drum to ensure even drying.
Special features Child Lock My Cycle Child Lock prevents children from playing with the dryer. When Child Lock is activated, all buttons except for the Power button are disabled. You can create your own cycle that contains your preferred settings and use it at your convenience. To activate/deactivate Child Lock, simultaneously press and hold Time and Wrinkle Prevent for 3 seconds. NOTE Drum Light To turn on the drum light while the dryer is running, press and hold Dry Level for 3 seconds.
Operations If an information code appears on the dryer, follow these steps: 1. Press and hold Mixed Load Bell for 3 seconds to activate Smart Care. 2. Open the Smart Care app on your smartphone. 3. Put the smartphone’s camera close to the display of the dryer. The app automatically recognizes the information code, and displays suggestions on your smartphone. 4. If the smartphone fails to recognize the information code more than twice, type the information code manually into the Smart Care app.
Maintenance Keep the dryer clean to prevent decreased performance and to lengthen its life. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. Cleaning Feature panel • • • • Tumbler • • Remove any stains from the tumbler with an all-purpose cleaner.
Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • • Does not run. • • • • • Does not heat. • • • • • Troubleshooting Does not dry. • • • • • • • • Make sure the door is latched shut. Make sure the power cord is plugged into a live electrical outlet. Check your home’s circuit breakers or fuses. Press or tap Start/Pause again if the door is opened during a cycle. Clean the lint filter.
Problem Action • Is noisy. • • • Dries unevenly. • • • Has odors. • • Household odors from paint, varnish, strong cleaners, etc. may enter the dryer with the surrounding room air. This is normal as the dryer draws the air from the room, heats it, pulls it through the tumbler, and exhausts it outside. When these odors linger in the air, completely ventilate the room before using the dryer. If odors persist, wash and dry the items again. • • • Make sure the lint filter is cleaned before every load.
Troubleshooting Problem Action • Extended time. Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Troubleshooting 44 English DV6800K_DC68-03650A-08_EN.
Information codes If the dryer fails to operate, you may see an information code on the display panel. To determine what you should do, check the list of codes in the table below, and then try the suggested actions. Code Action Operating the dryer with the door open. dC FC AC HC • • Make sure the door is properly closed. Make sure laundry is not caught in the door. Invalid power source frequency • Try restarting the cycle. • If this information code remains, contact a Samsung service center.
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, ironing, and dry cleaning. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Low Line dry / Hang to dry Warning symbols for laundering Drip dry Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations.
Specification Specification sheet A B Type C D Front loading dryer A. Height 33.5” (850 mm) B . Width 23.6” (600 mm) C. Depth 25.8” (655 mm) D. Depth with door open 90° 44.2” (1123 mm) Dimensions Net Weight 89.1 lb (40.4 kg) Heater rating 2200 W (elec.) Specification 48 English DV6800K_DC68-03650A-08_EN.
Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about ¾ full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about ½ full. • Small load : Fill the drum with 3-5 items, not more than ¼ full.
Specification NOTE • : factory setting, : can be selected Temperature setting Cycle Sensor Dry Manual Dry NORMAL HEAVY DUTY SANITIZE WOOL DELICATES ACTIVE WEAR TOWELS PERM PRESS QUICK DRY TIME DRY AIR FLUFF WRINKLE RELEASE Cycle Sensor Dry Manual Dry NORMAL HEAVY DUTY SANITIZE WOOL DELICATES ACTIVE WEAR TOWELS PERM PRESS QUICK DRY TIME DRY AIR FLUFF WRINKLE RELEASE Extra Low High Medium Med Low Low - - Mixed Load Bell - Wrinkle Preve
Warranty (U.S.A) SAMSUNG DRYER LIMITED WARRANTY TO ORIGINAL PURCHASER WITH PROOF OF PURCHASE This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
Warranty (U.S.
LIMITATION OF REMEDIES YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY.
Warranty (CANADA) SAMSUNG DRYER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, par
Warranty (CANADA) Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from province to province. To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc.
Memo DV6800K_DC68-03650A-08_EN.
Memo DV6800K_DC68-03650A-08_EN.
Memo DV6800K_DC68-03650A-08_EN.
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) DC68-03650A-08 DV6800K_DC68-03650A-08_EN.