Dryer User manual DV50K7500E(G)*, DV45K6500E(G)*, DV45K6200E(G)* DV7500K-03381C-02_EN.
Contents Contents Safety information 4 What you need to know about the safety instructions Important safety symbols Important safety precautions Warnings Cautions 4 4 6 8 8 Installation requirements 10 Key installation requirements Location considerations Alcove or closet installations Ducting requirements Exhausting requirements Gas requirements Electrical requirements 10 10 11 14 15 16 17 Installation 19 What’s included Step-by-step installation Vent blockage test Exhaust ducting guide Door re
55 Vent sensor Cleaning 55 56 Troubleshooting 57 Checkpoints Samsung Smart Home Information codes 57 60 61 Specifications 62 Fabric care chart Protecting the environment Specification sheet Cycle chart 62 63 64 65 English 3 DV7500K-03381C-02_EN.
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. Safety information What you need to know about the safety instructions Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it.
Safety information Important safety precautions Safety information WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using this appliance. 2. Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. 3.
17. This appliance must be grounded. See “Electrical requirements” and ”Grounding” in “Installation” section. 18. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 19. Do not insert your hand under the dryer. • This may result in injury. 20. Take care that children’s fingers are not caught in the door when closing it. • This may result in injury. 21.
Safety information WARNING - What to do if you smell gas: Safety information • • • • • • • • Do not try to light any appliance. Do not turn on the appliance. Do not touch any electrical switch. Do not use any phone in your building. Clear the room, building or area of all occupants. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. If you cannot reach your gas supplier, call the fire department.
• • • • • • • • • • • SAVE THESE INSTRUCTIONS English 9 DV7500K-03381C-02_EN.indd 9 4/7/2016 5:05:38 PM Safety information • • Do not use fabric softeners or products to eliminate static unless the softener or product is recommended for dryer use by the manufacturer of the fabric softener or product. Clean the lint screen before or after each load. Keep the area around the exhaust opening and surrounding areas free from lint, dust, and dirt.
Installation requirements Read through the following instructions before installing the dryer and keep this manual for future reference. WARNING The control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. Installation requirements Service personnel - Do not contact these parts while the appliance is energized. Key installation requirements • • • A grounded electrical outlet. A power cord for electric dryers (except in Canada).
Alcove or closet installations WARNING • • Minimum clearances between the dryer and adjacent walls or other surfaces: Sides 1 in. (25 mm) Rear 5.9 in. (150 mm) Top 17 in. (432 mm) Closet front 2 in. (51 mm) A A B C E A B D F A 1 in. (25 mm) D 2 in. (50 mm) B 27 in. (686 mm) E 32.6 in. (828 mm) - DV50K7500* 32.4 in. (823 mm) - DV45K6500*, 6200* C 17 in. (432 mm) F 5 in. (127 mm) English 11 DV7500K-03381C-02_EN.
Installation requirements Installation with pedestal D Installation requirements A B C E F A 38.7 in. (984 mm) D 53.1 in. (1350 mm) - DV50K7500* 53 in. (1345 mm) - DV45K6500*, 6200* to clear open door B 53.3 in. (1355 mm) E 32.6 in. (828 mm) - DV50K7500* 32.4 in. (823 mm) - DV45K6500*, 6200* C 27 in. (686 mm) F 5 in. (127 mm) 12 English DV7500K-03381C-02_EN.
Installation with stacked washing machine and dryer A E I Installation requirements B F C D G A 3 in. (76 mm) B H J G 1 in. (25 mm) 48 in . (3100 mm ) H 27 in. (686 mm) C 24 in . (1550 mm ) I 5 in. (127 mm) D 3 in. (76 mm) J 3 in. (76 mm) E 6 in. (152 mm) K 34.2 in. (869 mm) F 78.5 in. (1994 mm) L 8 in.
Installation requirements Ducting requirements Installation requirements Recommended Use only for short-run installation 4” (10.2 cm) 2.5” (6.4 cm) Weather hood type No. of 90° elbows Rigid Metallic flexible* Rigid Metallic flexible* 0 80 ft. (24.4 m) 41 ft. (12.4 m) 74 ft. (22.6 m) 33 ft. (10.1 m) 1 68 ft. (20.7 m) 37 ft. (11.2 m) 62 ft. (18.9 m) 29 ft. (8.8 m) 2 57 ft. (17.4 m) 33 ft. (10.1 m) 51 ft. (15.5 m) 25 ft. (7.6 m) 3 47 ft. (14.3 m) 29 ft. (8.8 m) 41 ft. (12.
Exhausting requirements Outside the United States and Canada • WARNING • In the United States and Canada • • • • • • All dryers must be exhausted to the outside. The required exhaust duct is 4 inches (10.2 cm) in diameter. See “Ducting requirements” in the “Installation” section for the maximum duct length and number of bends that can be used. The total length of flexible metal duct must not exceed 7’ 10½” (2.4 m).
Installation requirements Gas requirements WARNING • Installation requirements • • • • • • Use only natural or LP (liquid propane) gases. THE INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL FUEL GAS CODE ANSI/ Z223.1, LATEST REVISION (FOR THE UNITED STATES), OR WITH THE CAN / CGA-B149 INSTALLATION CODES (FOR CANADA). Gas dryers are equipped with a burner vent for use with natural gas.
Electrical requirements The wiring diagram is located on the plate under the control panel or rear frame. • • • Improperly connecting the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether your dryer is properly grounded. Do not modify the plug provided with your dryer – if it doesn’t fit the outlet, have a proper outlet installed by a qualified electrician.
Installation requirements • Installation requirements If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be connected to a permanently grounded metal wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dryer. Electrical connections Before operating or testing, follow all grounding instructions in the “Grounding” section.
Installation This dryer must be installed by a qualified technician. The installer is responsible for connecting the dryer to the main power while observing the relevant safety regulations of your area. What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the accessories, contact a local Samsung service center or the retailer.
Installation Accessories & tools Provided accessories Water hose (Canadian models only) Rack Dry (DV50K7500E(G)* Only) Smart Home Adapter (sold separately, HD39J1230GW) Short water hose Installation Y connector Required tools Pliers Cutting knife Pipe wrench (gas models only) Nut screwdriver Level Philips screwdriver Duct tape Wrench WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach.
Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Install the exhaust system 1. Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer. 2. To change the door direction, see “Door reversal”. 3. Install the exhaust system as instructed in the “Exhaust ducting guide” section.
Installation STEP 3 Connect the electrical wiring First, read through the “Electrical requirements” section, and then follow these steps. 3-wire system Installation A. External ground connector 1. Loosen or remove the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block. Tighten the screws. 3. Connect the other wires to outer terminal block screws. Tighten the screws. 4.
4-wire system 1. Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • B. Green or bare copper wire of power cord C. ¾” (1.9 cm) UL-listed strain relief D. Center silver-colored terminal block screw E. Neutral grounding wire (white) 2. Loosen or remove the screws from the center terminal block. 3. Connect the neutral wire (white or center wire) and ground wire (white) to the center screw of the terminal block.
Installation • A strain relief must be used. Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8” (1 cm) deep well socket. STEP 4 Connect the water hose (applicable models only) The dryer must be connected to a cold water tap using the provided water hoses. Installation 1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose.
Using the short hose as an extension Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling by hand until it is tight. 2. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten. You can damage the coupling. 3. Connect the Y connector (A) to the brass male end of the short hose. Turn the coupling by hand until it is tight. 4.
Installation STEP 5 Level the dryer To ensure optimal performance, the dryer must be level. 1. A Using a level (A), check if the dryer is level side to side and then front to back. If the dryer is not level, adjust the leveling feet (B) at the bottom of the dryer. Then, check if the dryer is level again.
STEP 6 Power on (Gas models) Make sure all gas connections, the exhaust line, and all wiring is connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 7 below. STEP 7 Final Check When installation is complete, confirm that: The dryer is plugged into an electrical outlet and grounded properly. The exhaust ductwork is connected and the joints are taped.
Installation STEP 8 Wi-Fi connection using the Smart Home Adapter You can control the dryer remotely using the Smart Home Adapter (sold separately), your home network, an Android or iOS smart phone, and the Samsung Smart Home app. To purchase the Smart Home Adapter, visit www.samsung.com and go to the DV50K7500 product page or search for Smart Home Adapter.
3. A Insert the Smart Home Adapter into the Adapter port (A) in the correct direction. Make sure the Samsung logo faces forward. CAUTION 4. Insert the upper area of the adapter cover first, and then press to lock as shown. CAUTION • • To prevent device damage or system failure, moisture away from the adapter cover. If the adapter cover gets wet or stained, use a soft cloth or sponge wipe up the moisture or wipe away the stain, and then dry well.
Installation Network connection (applicable models only) You can use the optional Smart Home Adapter (sold separately) to control and monitor your dryer through the Samsung Smart Home app. For more information about Samsung Smart Home, see the Samsung Smart Home section in this manual. NOTE • • Installation • • • • • Recommended encryption systems include WPA/TKIP and WPA2/AES. Any newer or non-standard Wi-Fi authentication protocols are not supported.
Vent blockage test After the dryer is installed, start the Vent Blockage Test to check if the duct system is properly installed. The Vent Blockage Test automatically detects the status of the ducts and reports any blockage or problems. Proper ducting can reduce drying time and save energy. NOTE The Vent Blockage Test must run with the dryer in a cool state. If the dryer warms up after the installation check, run the AIR FLUFF cycle for several minutes to reduce its internal temperature.
Installation NOTE • • Installation • During or after the test, the internal drum is hot. Use caution to prevent burns. The Vent Blockage Test is used to check for problems to the current duct system when the dryer is installed for the first time. If the test result displays “CLg” (the duct system is blocked ), refer to the “Ducting requirements” section on page 14 and the “Exhaust ducting guide” section below, and then take proper measures to correct any problems.
Door reversal Type 1 1. Unplug the power cord. 2. Remove two door hinge screws. 3. Lift the door and remove it. NOTE 4. Remove the two screws that are above and below the cut-out in the frame front. 5. Remove the two screws above and below the lever holder on the opposite side of the door opening. 6. Remove the two screws that hold the lever holder in place, and then remove the lever holder. English 33 DV7500K-03381C-02_EN.
Installation Re-insert the two screws that held the lever holder into the same screw holes, and then tighten. 8. Remove the single screw from the back of the door hinge. Installation 7. NOTE This is the screw that supports the door against the frame so you can unscrew or screw in the hinge without needing to support the door yourself. 9. Insert the screw you just removed into the other screw hole on the back of the door hinge, and then tighten. 10.
11. Push the lever holder into the cut out on the other side of the door opening. Insert screws, and then tighten as shown. English 35 DV7500K-03381C-02_EN.indd 35 4/7/2016 5:05:48 PM Installation 12. Re-attach the remaining screws to the remaining holes above and below the lever holder, and then tighten.
Before you start Here are a few things you should know before starting your dryer. Sort and load • • • • Put one wash load in the dryer at a time. Do not mix heavy and lightweight items together. To improve drying efficiency for one or two items, add a dry towel to the load. For best results, untangle items before inserting them into the dryer. • • • • Overloading reduces the tumbling action, resulting in uneven drying and wrinkling.
Rack Dry (applicable models only) Some models come with a drying rack which is inserted into the drum at the factory. If your model came with a drying rack, remove the rack from the drum before you use the dryer for the first time. To remove the rack, pull the rack straight up, and then take it out of the drum. Remove the drying rack from its packaging and store the rack for later use. English 37 DV7500K-03381C-02_EN.
Before you start Drying rack drying suggestions Item Washable sweaters (block to shape and lay flat on rack) Stuffed toys (cotton or polyester fiber-filled) Cycle settings TIME DRY with the Extra Low temperature setting Stuffed toys (foam or rubber-filled) Foam rubber pillows AIR FLUFF Sneakers WARNING Before you start • • Make sure to unpack the drying rack before using it. Otherwise, the dryer can be damaged or its performance diminished.
Operations WARNING To reduce the risk of fire, electric shock, or injury, read the “Safety information“ before operating this appliance. Feature panel Electric models DV50K7500E* 07 02 09 13 06 15 08 01 10 11 03 04 05 12 07 02 09 13 06 15 10 01 11 14 03 04 05 12 DV42K6200E* 07 02 09 13 06 15 10 01 11 14 03 04 05 12 English 39 DV7500K-03381C-02_EN.
Operations Gas models DV50K7500G* 07 02 09 13 06 15 08 01 10 11 03 04 05 12 DV45K6500G* 07 02 09 13 06 15 10 Operations 01 11 14 03 04 05 12 DV42K6200G* 07 02 09 13 06 15 10 01 11 14 03 04 05 12 40 English DV7500K-03381C-02_EN.
01 Cycle Selector Turn the Cycle Selector to select the desired cycle. The indicator by the cycle name lights up. • Sensor Dry cycles: The dryer senses the internal humidity and uses it to determine the drying time. • Manual Dry cycles: The drying time is fixed. • Steam cycles: The dryer sprays water into the drum to deodorize clothes and reduce static electricity and wrinkles. Displays all cycle information, including the cycle time, information code, and operating status.
Operations Press Temp. to change the temperature of the current cycle. • • 04 Temp. • • • 05 Time High: For sturdy cottons or those labeled Tumble Dry. Medium: For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium. Med Low: For heat lower than Medium. Use to dry synthetic or washable knit fabrics. Low: For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm. Extra Low: Provides the lowest heated drying temperature possible.
09 My Cycle 10 Mixed Load Bell Choose your favorite cycle including the cycle time, temperature, and dry level. See “My Cycle” for details. The Mixed Load Bell notifies you when the average dry level in a load is damp dry (80 % dried). This lets you take items that you don’t want fully dried or that dry quickly out of the dryer early while letting others continue to dry. You can select this option in all Sensor Dry cycle except for WOOL, ACTIVE WEAR, and STEAM SANITIZE.
Operations NOTE Extremely tangled items finished by the washer may degrade the drying efficiency or cause the door to open. We recommend that you untangle the items before drying. Do not put objects on the dryer, especially on the feature panel. CAUTION Do not spray water onto the feature panel. This may cause a system failure. Simple steps to start Press POWER to turn on the dryer. To change the cycle during operation 2. Turn the Cycle Selector to select a cycle. 1.
Cycle overview Cycle Description ECO NORMAL (DV45K6500E(G)*, DV50K7500E(G)*) For reducing energy usage. This cycle adjusts the cycle time and temperature for increased efficiency. For most fabrics including cottons and linens. NORMAL If Normal is selected, the Eco Dry function is enabled by default. For more information, see Eco Dry in the “Feature panel“ section. For drying items made out of heavy fabrics, such as jeans, corduroys, or work clothes, with high temperature heat.
Operations Cycle Description STEAM SANITIZE Use to sanitize items by applying steam and high-temperature heat to the fabric. This cycle can make items soft and reduce smells. Confirm that the laundry load is wet or partially before starting this cycle. Drying guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference.
Cycle Description Plastics (shower curtains, outdoor furniture covers, etc.) Use AIR FLUFF or TIME DRY and the Low or Extra Low temperature settings depending on the care label instructions. WARNING Do not dry: • • • Fiberglass items (curtains, draperies, etc.) Woolens, unless recommended on the label Items spotted or soaked with vegetable or cooking oils Operations English 47 DV7500K-03381C-02_EN.
Operations Special features Child Lock Child Lock prevents children from playing with the dryer. When Child Lock is activated, all buttons except for the POWER button are disabled. To activate/deactivate Child Lock, simultaneously press and hold Temp. and Time for 3 seconds. 1. Press and hold Eco Dry for 3 seconds to activate Smart Care. The Smart Care indicator turns on. 2. Open the Smart Care app on your smartphone. 3. Put the smartphone’s camera close to the display of the dryer.
Sound On/Off My Cycle To turn off the dryer’s notification beeps and melodies, press and hold Dry Level for 3 seconds (DV50K7500*) or press Sound (DV45K6500*, 6200*). You can create your own cycle that contains your preferred settings, and use it at your convenience. To unmute the dryer, press and hold Dry Level again for 3 seconds(DV50K7500*) or press Sound (DV45K6500*, 6200*) 1. Turn the Cycle Selector to select a cycle. The cycle indicator turns on. 2. Set or change the settings (Dry Level, Temp.
Operations Samsung Smart Home (applicable models only) Installation Visit the Google Play Store, Galaxy Apps, or Apple App Store and search for “Samsung Smart Home”. Download and install the Samsung Smart Home app provided by Samsung Electronics to your smart device. NOTE • • The Samsung Smart Home app is designed for Android 4.0 (ICS) or higher, or iOS 7.0 or higher, and is optimized for Samsung smartphones (Galaxy S and Galaxy Note series).
Getting started Insert the Smart Home Adapter into the Smart Home Adapter port of your dryer. 2. Run the Samsung Smart Home app and log in with your Samsung account. iPhone users are required to provide the login information each time they access the app. 3. Access Device > the plus (+) icon, and then tap Dryer. 4. Follow the onscreen instructions to provide the necessary information about the router, and then tap Next. 5.
Operations 6. Once your dryer is registered properly, the App will show this message. “Congratulations! Your dryer has been added to your Smart Home. Please complete the setup by restarting your dryer. You may then remotely control your dryer by turning on Smart Control. * The remote control function is only available with electric dryers.” 7. When the device registration is complete, the dryer icon will appear in the Samsung Smart Home app. 8.
Key features You can register Samsung smart home appliances on the Samsung Smart Home server for remote access. Menu overview 01 07 03 08 02 09 04 10 11 05 For improved performance, the content and design of the app is subject to change without notice. 01 Current cycle Tap to select a desired cycle. 02 Start/Pause With Smart Control (Smart Monitor) enabled on the dryer, you can remotely start an operation or pause an operation temporarily. 03 Options You can set or adjust options remotely.
Operations 06 About Device • • Version: Displays the current version of the Dryer app. Self Check (applicable models only): The dryer runs a selfdiagnosis and displays an information code if it finds an issue to check. 07 Current Process The current process - Washing, Rinsing, etc. - is displayed. 08 Progress The progress of the selected cycle is displayed in 1 % increments. 09 Remaining Time The time remaining for the selected cycle is displayed for.
Maintenance Keep the dryer clean to prevent decreased performance and to lengthen its life. WARNING The control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel - Do not contact these parts while the dryer is energized. Vent sensor The dryer features a vent sensor that detects and notifies you when it is time to clean the ductwork. The indicator lets you know the status of the duct.
Maintenance Cleaning Feature panel Dryer exterior • • • • • Clean with a soft, damp cloth. Do not use abrasive substances. Do not spray liquid cleaning agents directly on the display of the dryer. Some laundry pre-treatment soil and stain removers may damage the feature panel. When using liquid cleaning agents, apply them to the cleaning cloth. Do not apply them directly to the dryer. Wipe up any spills or overspray immediately.
Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • • Does not run. • • • • • Does not heat. • • • • • • • • • • Check your home’s circuit breakers or fuses. Some cycles do not require heat. Check the selected cycle again. For a gas dryer, make sure the gas supply is on. Clean the lint filter and exhaust duct. The dryer may have moved into the cool-down phase of the cycle.
Troubleshooting Problem Is noisy. Action • Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly. • It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle. Make sure the dryer is leveled properly as outlined in the installation instructions. It is normal for the dryer to hum due to the high velocity of air moving through the dryer drum, fan, or exhaust system. • • • Dries unevenly. • • • Has odors.
Problem Action Items still wrinkled after Wrinkle Prevent (Wrinkle Away, Wrinkle Release). • • • Small loads of 1 to 4 items work best. Load fewer items. Load similar-type items. Take out the items immediately after drying is complete. • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed. • Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached.
Troubleshooting Samsung Smart Home Problem I could not find “Samsung Smart Home” in the app market. The Samsung Smart Home app fails to operate. The Samsung Smart Home app is installed but is not connected to my dryer. Could not log into the app. An error message appears when I try to register my dryer. Troubleshooting The Samsung Smart Home app is successfully connected to my dryer but does not run. Action • The Samsung Smart Home app is available for smartphones that run Android 4.
Information codes If the dryer fails to operate, you may see an information code on the display panel. To determine what you should do, check the list of codes in the table below, and then try the suggested actions. Code Action Operating the dryer with the door open. DC FC AC • • Make sure the door is properly closed. Make sure laundry is not caught in the door. Invalid power source frequency • Try restarting the cycle. • If this information code remains, contact a Samsung service center.
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, ironing, and dry cleaning. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Low Line dry / Hang to dry Warning symbols for laundering Drip dry Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations.
Specification Specification sheet NOTE E “A. Height” Spec can vary from 42.4 to 43.3 inches (107.7 - 108.9 cm) depending on the leveling feet adjustments. A B C D Front loading dryer Type A. Height B. Width C. Depth Dimensions D. Depth with door open 90° Specification E. Width with door open 110° Product - inches (cm) 38.7 (98.4) Required for Installation - inches 40.7 Product - inches (cm) 27.0 (68.6) Required for Installation - inches 29.0 Product - inches (cm) Heater rating 32.
Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about ¾ full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about ½ full. • Small load : Fill the drum with 3-5 items, not more than ¼ full.
Specification NOTE • : factory setting, : can be selected Cycle Temperature setting High Medium Med Low Low ECO NORMAL (DV45K6500E(G)*, DV50K7500E(G)*) Extra Low Time setting NORMAL HEAVY DUTY BEDDING PERM PRESS WOOL (DV45K6500E(G)*, DV50K7500E(G)*) DELICATES ACTIVE WEAR QUICK DRY TIME DRY AIR FLUFF REFRESH WRINKLE AWAY STEAM SANITIZE Specification 66 English DV7500K-03381C-02_EN.
Options Cycle Anti Static ECO NORMAL (DV45K6500E(G)*, DV50K7500E(G)*) Mixed Load Bell Wrinkle Prevent NORMAL HEAVY DUTY BEDDING PERM PRESS WOOL (DV45K6500E(G)*, DV50K7500E(G)*) DELICATES Adjust Time ACTIVE WEAR QUICK DRY AIR FLUFF TIME DRY Eco Dry REFRESH WRINKLE AWAY STEAM SANITIZE Specification English 67 DV7500K-03381C-02_EN.
Warranty (U.S.A) SAMSUNG DRYER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, par
Warranty (U.S.A) Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. To obtain warranty service, please contact SAMSUNG at: Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.
Warranty (CANADA) SAMSUNG DRYER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.
Warranty (CANADA) This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilit
Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from province to province. To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada 1-800-SAMSUNG (726-7864) www.samsung.
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) DC68-03381C-02 DV7500K-03381C-02_EN.