Operation Manual

32
Setting Up the
Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate
the unit using a Samsung TV remote control, by
connecting the DVD 1080PK to a SAMSUNG TV
using a HDMI Cable. (see page 10-11) (This is only
available with SAMSUNG TVs that support
Anynet+).
Select On when you connecting the DVD-1080PK
with Samsung TV that support Anynet+.
1. With the unit in Stop mode, press the MENU button.
2. Press the

/

buttons to select Setup, then press the 
or ENTER button.
MenuReturnEnter
Language Setup

Audio Setup

Display Setup

Parental Setup :

DivX(R) Registration

Anynet+(HDMI-CEC):On
3. Press the

/

buttons to select Anynet+(HDMI-CEC),
then press the
 or ENTER button.
MenuReturnEnter
4. Set the Anynet+(HDMI-CEC) to “On” on your DVD Player,
then press the
 or ENTER button.
Language Setup

Audio Setup

Display Setup

Parental Setup :

DivX(R) Registration

Anynet+(HDMI-CEC):On
• You can operate the DVD Player by using TV
remote control. (TV buttons that can be used to con
trol the DVD Player : , , , ,
, , ,and buttons,
buttons.).
• When you press Anynet+ button on the TV remote
control, the below OSD will appear.
View TV
Select Device
®
Menu on Device
Device Operation
Setup
Receiver : Off
®
®
®
®
®
Record
®
Exit
Move
ENTER
DVDP
V
i
ew
TV
®
TV Menu
- Select Device : Use this option to select device.
- Menu on Device : Same as MENU button on the
DVD Player remote control.
- Device Operation : Same as INFO button on the
DVD Player remote control.
Note
• By pressing the PLAY button of the unit while watch-
ing TV, the TV screen will change to the play screen.
• If you play a DVD when the TV power is off, the TV
will power On.
• If you turn the TV off , the DVD Player will power
off automatically.
• If you change the HDMI to other sources
(Composite,Component,... etc) in TV while play
ing the DVD disc, the DVD Player will stop play
ing.
MenuReturnEnter
Language Setup

Audio Setup

Display Setup

Parental Setup :

DivX(R) Registration

Anynet+(HDMI-CEC):On
Off
√ On
5. Set the Anynet+ function at your TV. (See the TV instruction
manual for more information.).
Note
To make the Setup menu disappear, press the
MENU button.