Operation Manual

English

Rear Panel

1. SCART JACK

- Connect to a TV scart input jack

2. DIGITAL AUDIO OUT JACKS

- Use either an optical or coaxial digital cable to con-

nect to a compatible Dolby Digital receiver.

- Use either an optical or coaxial digital cable to con-

nect to an A/V Amplifier that contains a Dolby Digital,

MPEG2 or DTS decoder.

3. HDMI OUT JACK

- Use the HDMI cable to connect this jack to the HDMI

jack on your television for the best quality picture.

- If an HDMI cable is connected to an HDMI-compati-

ble TV, HDMI will be output automatically within 10

seconds.

4. VIDEO OUT JACK

- Use a video cable to connect to the Video input jack

on your television.

5. 5.1CH ANALOG AUDIO OUT JACKS

- Connect to an amplifier with 5.1ch analog input jacks.

Note

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in

the TV’s menu system.

- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver-

sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

- There may be no image output if the DVD player is connected to a TV or display that is not compatible

with the above format.

- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.

- See pages 29 ~ 30 to get more information on how to use the setup menu.