VSX_918_818_KU.book 1 ページ 2008年5月15日 木曜日 午後6時46分 AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-918V VSX-818V Register your product at www.pioneerelectronics.com (US) www.pioneerelectronics.ca (Canada) • Protect your new investment The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.
VSX_918_818_KU.book 2 ページ 2008年5月15日 WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_B_En or moisture. WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region.
VSX_918_818_KU.book 3 ページ 2008年5月15日 IMPORTANT 木曜日 午後6時46分 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
VSX_918_818_KU.book 4 ページ 2008年5月15日 木曜日 午後6時46分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Contents 01 Before you start 04 Controls and displays Checking what’s in the box . . . . . . . . . . . . . . . Loading the batteries . . . . . . . . . . . . . . . . . . . Installing the receiver . . . . . . . .
VSX_918_818_KU.book 5 ページ 2008年5月15日 09 Controlling the rest of your system 午後6時46分 Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" is a registered trademark of DTS, Inc. and "DTS 96/24" is a trademark of DTS, Inc. For U.S. and Australia Model English Operating other Pioneer components . . . . . . 49 Setting the remote to control other components . . . . . . . . . . . . . . . . . . . . . . . . .
VSX_918_818_KU.book 6 ページ 2008年5月15日 01 木曜日 午後6時46分 Before you start Chapter 1: Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: • • • • • • Setup microphone Remote control unit Dry cell batteries (AA size IEC R6) x2 AM loop antenna FM wire antenna These operating instructions Loading the batteries Installing the receiver • When installing this unit, make sure to put it on a level and stable surface.
VSX_918_818_KU.book 7 ページ 2008年5月15日 木曜日 午後6時46分 5 minute guide 02 Chapter 2: • Be sure to complete all connections before connecting to an AC power source. 1 Connect your DVD player and TV. See Connecting a DVD player and TV on page 12 to do this. For surround sound, you’ll want to hook up using a digital connection from the DVD player to the receiver. Center (C) Surround Left (LS) Listening position 3 Plug in and switch on the receiver, followed by your DVD player, subwoofer and TV.
VSX_918_818_KU.book 8 ページ 2008年5月15日 02 木曜日 午後6時46分 5 minute guide Make sure there are no obstacles between the speakers and the microphone. Automatically setting up for surround sound (MCACC) AUX MASTER VOLUME The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level.
VSX_918_818_KU.book 9 ページ 2008年5月15日 木曜日 午後6時46分 5 minute guide 5 02 • If you’re using a subwoofer, it is automatically detected every time you switch on the system. Make sure it is on and the volume is turned up. 1.Auto MCACC Now Analyzing [ OK ] [ OK ] [ OK ] :Cancel • For correct speaker settings, do not adjust the volume during the test tones. 1.
VSX_918_818_KU.
VSX_918_818_KU.book 11 ページ 2008年5月15日 木曜日 午後6時46分 Connecting up 03 Chapter 3: English Connecting up Digital audio cables Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver.1 Coaxial digital audio cable Optical cable Video cables These cables are the most common type of video connection and are used to connect to the composite video terminals. The yellow plugs distinguish them from cables for audio.
VSX_918_818_KU.book 12 ページ 2008年5月15日 03 木曜日 午後6時46分 Connecting up DVD player Connecting a DVD player and TV This page shows you how to connect your DVD player and TV to the receiver. 1 Connect a coaxial digital audio output on your DVD player to the DIGITAL COAX 1 (DVD/BD) input on this receiver. Use a coaxial digital audio cable for the connection.1 2 Connect the composite video output and the stereo analog audio outputs2 on your DVD player to the DVD/BD inputs on this receiver.
VSX_918_818_KU.book 13 ページ 2008年5月15日 木曜日 午後6時46分 Connecting up 03 VSX-918V IN HDMI ANTENNA AUX R CEN- SUB TER WOOFER FM UNBAL L IN DIGITAL IN CD CONTROL (DVD / BD) IN 1 OPT OUT IN CD-R / TAPE / MD (ASSIGNABLE) 2 OPT FRONT DVD / BD IN SUB WOOFER PREOUT TV / SAT IN MONITOR OUT DVR / VCR IN DVR / VCR OUT DVD5.
VSX_918_818_KU.book 14 ページ 2008年5月15日 03 木曜日 午後6時46分 Connecting up Connecting other audio components The number and kind of connections depends on the kind of component you’re connecting.1 Follow the steps below to connect a CD-R, MD, DAT, tape recorder or other audio component. VSX-918V IN HDMI ANTENNA AUX R FM UNBAL L IN DIGITAL IN CD CONTROL (DVD / BD) IN 1 CD-R / TAPE / MD 2 If necessary, connect the analog audio outputs of the component to a set of spare audio inputs on this receiver.
VSX_918_818_KU.book 15 ページ 2008年5月15日 木曜日 午後6時46分 Connecting up 03 VSX-918V IN ANTENNA AUX R FM UNBAL L IN DIGITAL IN CD CONTROL (DVD / BD) IN 1 Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
VSX_918_818_KU.book 16 ページ 2008年5月15日 03 木曜日 午後6時46分 Connecting up Using the component video jacks Component video should deliver superior picture quality when compared to composite video. A further advantage (if your source and TV are both compatible) is progressive-scan video, which delivers a very stable, flicker-free picture. See the manuals that came with your TV and source component to check whether they are compatible with progressive-scan video.
VSX_918_818_KU.book 17 ページ 2008年5月15日 木曜日 午後6時46分 Connecting up Español HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.
VSX_918_818_KU.book 18 ページ 2008年5月15日 03 木曜日 午後6時46分 Connecting up Connecting to the front panel audio mini jack Front audio connections are accessed via the front panel using the VIDEO/PORTABLE button. Press VIDEO/PORTABLE and select PORTABLE input. Use a stereo mini-jack cable to connect a digital audio player, etc. This receiver AC outlet Power supplied through this outlet is turned on and off by the receiver’s power switch.
VSX_918_818_KU.book 19 ページ 2008年5月15日 木曜日 午後6時46分 Connecting up 03 Using external antennas Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below). fig. b Use an F connector to connect an external FM antenna. Deutsch fig. a To improve FM reception English Connecting antennas fig.
VSX_918_818_KU.book 20 ページ 2008年5月15日 03 木曜日 午後6時46分 Connecting up You can use the speakers connected to the B speaker terminals to listen to stereo playback in another room. Make sure to review Hints on speaker placement on page 21 when placing the speakers in another room. See Switching the speaker system on page 22 for the listening options with this setup. Connecting the speakers A complete setup of six speakers (including the subwoofer) is shown here but everyone’s home setup will vary.
VSX_918_818_KU.book 21 ページ 2008年5月15日 木曜日 午後6時46分 Connecting up 03 Twist exposed wire strands together. 2 Loosen terminal and insert exposed wire. 3 Tighten terminal. 1 2 3 10 mm (3/8 in.) B-Speaker terminals: 1 Twist exposed wire strands together. 2 Push open the tabs and insert exposed wire. Release the tabs. 1 2 3 Caution • Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal.
VSX_918_818_KU.book 22 ページ 2008年5月15日 03 木曜日 午後6時46分 Connecting up Switching the speaker system Caution • If you choose to install the center speaker on top of the TV, be sure to secure it with putty, or by other suitable means, to reduce the risk of damage or injury resulting from the speaker falling from the TV in the event of external shocks such as earthquakes. • Make sure no exposed speaker wire is touching the rear panel, this may cause the receiver to turn off automatically.
VSX_918_818_KU.book 23 ページ 2008年5月15日 木曜日 午後6時46分 Controls and displays 04 Chapter 4: English Controls and displays Deutsch Front panel Illustration shows the VSX-918V model 1 2 3 4 5 6 7 AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-918V PHASE CONTROL ACOUSTIC EQ AUTO SURR / STREAM DIRECT STEREO / A.L.C.
VSX_918_818_KU.book 24 ページ 2008年5月15日 04 木曜日 午後6時46分 Controls and displays 10 MCACC PORTABLE jack Use to connect a microphone when performing Auto MCACC setup, or connect an auxiliary component using a stereo mini-jack cable (page 18). 11 PHONES jack Use to connect headphones (when connected, there is no sound output from the speakers (except speaker system B connections)). 18 PHASE CONTROL Press to switch on/off Phase Control (page 10).
VSX_918_818_KU.book 25 ページ 2008年5月15日 木曜日 午後6時46分 Controls and displays DTS Lights when a source with DTS encoded audio signals is detected. 3 2 DIGITAL Lights to indicate decoding of a Dolby Digital multichannel signal. 7 AUTO SURR. Lights when Auto Surround (see Auto playback on page 30) or XM HD Surround (page 58) is on. 9 SLEEP Lights when the sleep mode is active (page 28). 10 Tuner indicators / MONO Lights when the mono mode is set using the MPX button. 16 D.E.
VSX_918_818_KU.book 26 ページ 2008年5月15日 04 木曜日 午後6時46分 Controls and displays 3 MULTI CONTROL buttons Press to select control of other components (see Controlling the rest of your system on page 49). TV CTRL, PORTABLE, CD-R, XM and SIRIUS buttons can be used with SHIFT button. Remote control Illustration shows the VSX-918V model 1 11 RECEIVER 2 3 SOURCE INPUT SELECT 12 MULTI CONTROL TV CTRL DVD TV DVR CD-R XM SIRIUS CD FM AM PORTABLE iPod RECEIVER STEREO/ AUTO/DIRECT A.L.C.
VSX_918_818_KU.book 27 ページ 2008年5月15日 木曜日 午後6時46分 Controls and displays MASTER VOLUME +/– Use to set the listening volume. TOP MENU Displays the disc ‘top’ menu of a DVD. SUBTITLE* Displays/changes the subtitles included in multilingual DVD-Video discs. REC* Start recording. AUDIO* Changes the audio language or channel on DVD discs. CATEGORY Press to browse digital radio broadcasts. HDD*, DVD* These buttons switch between the hard disk and DVD controls for HDD/DVD recorders.
VSX_918_818_KU.book 28 ページ 2008年5月15日 04 TUNER DISP* Switches between named station presets and radio frequencies (page 47). 9 INFO Use to bring up information screens on a digital TV. CLASS* Switches between the three banks (classes) of radio station presets (page 47). 10 SHIFT Press to access the ‘boxed’ commands (above the buttons) on the remote. These buttons are marked with an asterisk (* ) in this section. D.
VSX_918_818_KU.book 29 ページ 2008年5月15日 Controls and displays 木曜日 午後6時46分 04 Operating range of remote control English The remote control may not work properly if: • There are obstacles between the remote control and the receiver’s remote sensor. • Direct sunlight or fluorescent light is shining onto the remote sensor. • The receiver is operated simultaneously with another infrared remote control unit.
VSX_918_818_KU.book 30 ページ 2008年5月15日 05 木曜日 午後6時46分 Listening to your system Chapter 5: Listening to your system Important • Certain features explained in this section will not be possible depending on the source (for example, PCM 88.2 kHz/96 kHz, DTS 96 kHz (24 bit) or WMA9 Pro sources). Auto playback The simplest, most direct listening option is the Auto Surround feature.
VSX_918_818_KU.book 31 ページ 2008年5月15日 木曜日 午後6時46分 Listening to your system 05 Using the Advanced surround effects STEREO/ AUTO/DIRECT A.L.C. STANDARD ADV SURR PHASE ACOUSTIC SOUND EQ DIALOG RETRIEVER When you select STEREO you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital and DTS multichannel sources are downmixed to stereo. In the Auto level control stereo mode (A.L.C.
VSX_918_818_KU.book 32 ページ 2008年5月15日 05 木曜日 午後6時46分 Listening to your system Using Front Stage Surround Advance The Front Stage Surround Advance function allows you to create natural surround sound effects using just the front speakers and the subwoofer. STEREO/ AUTO/DIRECT A.L.C. STANDARD ADV SURR PHASE • While listening to a source, press STEREO/ A.L.C. to select Front Stage Surround Advance modes. • STEREO – See Listening in stereo on page 31 for more on this. • A.L.C.
VSX_918_818_KU.book 33 ページ 2008年5月15日 木曜日 午後6時46分 Listening to your system • Default setting: OFF / ALL CH (after the Auto MCACC Setup or EQ Auto Setting) PHASE ACOUSTIC SOUND EQ DIALOG RETRIEVER PHASE CONTROL • ALL CH – No special weighting is given to any one channel. STANDBY/ON DVD • CUSTOM 1/2 – Custom settings TV DVR VIDEO/PORTABLE INPUT SELECTOR PHONES SOUND RETRIEVER VSB MODE SPEAKERS SIGNAL SELECT • EQ OFF – Switches Acoustic Calibration EQ off.
VSX_918_818_KU.book 34 ページ 2008年5月15日 05 木曜日 午後6時46分 Listening to your system C RECEIVER Setting the AV options There are a number of additional sound settings you can make using the AV Parameter menu. The defaults, if not stated, are listed in bold. Important • The AV Parameter menu is not available with DVD 5.1ch selected by SIGNAL SEL (SIGNAL SELECT) (see Choosing the input signal on page 36).
VSX_918_818_KU.book 35 ページ 2008年5月15日 木曜日 午後6時46分 Listening to your system 05 What it does Option(s) DUAL MONOd Specifies how dual mono encoded Dolby Digital soundtracks should be played. ch1 – Channel 1 is heard only ch2 – Channel 2 is heard only DRC (Dynamic Range Control) e Localizes dialog in the center channel to make it stand out from other background sounds in a TV or movie soundtrack. Some Dolby Digital and DTS audio sources include ultralow bass tones.
VSX_918_818_KU.book 36 ページ 2008年5月15日 05 木曜日 午後6時46分 Listening to your system Playing other sources 1 Turn on the power of the playback component. 2 Turn on the power of the receiver. 3 Select the source you want to playback. Use the MULTI CONTROL buttons (INPUT SELECTOR). 4 Start playback of the component you selected in step 1.
VSX_918_818_KU.book 37 ページ 2008年5月15日 木曜日 午後6時46分 The System Setup menu 06 Chapter 6: RECEIVER CONTROL CH + ONE TOUCH COPY RECEIVER SOURCE TUNE AV PARAMETER TOP MENU T.EDIT MENU ST INPUT SELECT ST ENTER CD-R XM SIRIUS CD FM AM PORTABLE GUIDE CH - CATEGORY TUNE iPod SETUP RECEIVER SUBTITLE RETURN REC ANT AUDIO 1 Switch on the receiver and your TV. Use the RECEIVER button to switch on.1 System Setup System Setup 1.Auto MCACC 2.Manual MCACC 3.Manual SP Setup 4.
VSX_918_818_KU.book 38 ページ 2008年5月15日 06 • For some of the settings below, you’ll have to connect the setup microphone to the front panel and place it about ear level at your normal listening position. See Automatically setting up for surround sound (MCACC) on page 8 if you’re unsure how to do this. Also see Other problems when using the Auto MCACC Setup on page 10 for notes regarding background noise and other possible interference.
VSX_918_818_KU.book 39 ページ 2008年5月15日 木曜日 午後6時46分 The System Setup menu 2 Adjust the distance of the left channel from the listening position. 2b.Fine SP Distance 2a.Fine Channel Level + [ 0.0dB (Reference) 0.0dB ] +1.0dB [ –3.0dB ] [ +10.0dB ] [ –1.5dB ] L(Reference) 10.0ft ENTER:Next :Cancel :Finish • If you want to go back and adjust a channel, simply use / to select it. 3 When you’re finished, press RETURN. You return to the Manual MCACC setup menu. • Default setting: 10.
VSX_918_818_KU.book 40 ページ 2008年5月15日 06 木曜日 午後6時46分 The System Setup menu • If you want to go back and adjust a channel, simply use / to select it. 2 Wait for the EQ AUTO Setting to finish. 2c.EQ AUTO Setting 4 When you’re finished, press RETURN. You return to the Manual MCACC setup menu.
VSX_918_818_KU.book 41 ページ 2008年5月15日 木曜日 午後6時46分 The System Setup menu 06 2d.EQ Data Copy 2d.EQ Data Copy TO CUSTOM1 CUSTOM2 TO FROM [ CUSTOM1 CUSTOM2 [ OK CUSTOM1 CUSTOM2 ] Start Copy FROM [ ALL CH ADJ CUSTOM2 ] [ OK ] :Cancel :Cancel 3 Select ‘OK’ to copy and confirm. 2e. EQ CUSTOM1 Adjust Test Tone Type: "ALL CH ADJUST" [ Left ] 40Hz : +1.0dB 125Hz : [ 0.0dB] 250Hz : [ 0.0dB] 4kHz : [ 0.0dB] 13kHz : [ 0.0dB] TRIM : [ 0.0dB] :Finish Use / to select the channel.
VSX_918_818_KU.book 42 ページ 2008年5月15日 06 After you have completed an automatic or manual Acoustic Calibration EQ adjustment, you can check the ALL CH ADJUST, FRONT ALIGN and custom settings using the onscreen display. 1 Select ‘EQ Data Check’ from the Manual MCACC setup menu. 2g.EQ Data Check 2.Manual MCACC a.Fine Ch Level b.Fine SP Distance c.EQ AUTO Setting d.EQ Data Copy e.EQ CUSTOM1 Adjust f .EQ CUSTOM2 Adjust g .
VSX_918_818_KU.book 43 ページ 2008年5月15日 木曜日 午後6時46分 The System Setup menu 3a.Speaker Setting 3.Manual SP Setup a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance Front SMALL Center [ SMALL ] Surr [ SMALL ] SUB W. : YES center speakers are also routed to the subwoofer). If you did not connect a subwoofer choose NO (the bass frequencies are output from other speakers). :Return :Finish • SUB W.
VSX_918_818_KU.book 44 ページ 2008年5月15日 06 木曜日 午後6時46分 The System Setup menu 1 Select ‘Crossover Network’ from the Manual SP Setup menu. 3b.Crossover Network 3.Manual SP Setup a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance Frequency 3 Confirm your selected setup option. The test tones will start after you press ENTER. After the volume increases to the reference level, test tones will be output. 80Hz 3c.Channel Level Test Tone [ Manual ] Please Wait . . .
VSX_918_818_KU.book 45 ページ 2008年5月15日 The System Setup menu 木曜日 午後6時46分 06 Speaker Distance 3d.Speaker Distance 3.Manual SP Setup a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance [ [ [ [ [ 10.0ft 10.0ft ] 10.0ft ] 10.0ft ] 10.0ft ] 10.0ft ] :Finish 3 When you’re finished, press RETURN. You return to the Manual SP Setup menu. Italiano 2 Adjust the distance of each speaker using / . You can adjust the distance of each speaker in 0.5 feet increments.
VSX_918_818_KU.book 46 ページ 2008年5月15日 07 木曜日 午後6時46分 Using the tuner Chapter 7: Using the tuner High speed tuning Press and hold TUNE / for high speed tuning. Release the button at the frequency you want. Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below.
VSX_918_818_KU.book 47 ページ 2008年5月15日 木曜日 午後6時46分 Using the tuner 07 XM SIRIUS CD FM AM RECEIVER TUNER DISP CLASS MPX D.ACCESS ACOUSTIC SOUND DIALOG RETRIEVER EQ MIDNIGHT ANALOG ATT DIMMER SLEEP SIGNAL SEL SR+ CH SEL +10 iPod CTRL LEVEL MUTE INFO SHIFT TUNE ST TV CONTROL INPUT SELECT TV CH TV VOL Tip T.EDIT MENU ST ENTER GUIDE CH - CATEGORY TUNE RECEIVER RETURN 1 Tune to a station you want to memorize. See Listening to the radio on page 46 for more on this.
VSX_918_818_KU.book 48 ページ 2008年5月15日 08 木曜日 午後6時46分 Making recordings Chapter 8: Making recordings Making an audio or a video recording You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV).
VSX_918_818_KU.book 49 ページ 2008年5月15日 木曜日 午後6時46分 Controlling the rest of your system 09 Chapter 9: VSX-918V model only Most components can be assigned to one of the MULTI CONTROL buttons using the component’s manufacturer preset code stored in the remote. Note CONTROL CONTROL OUT IN OUT IN VSX-918V • You can cancel or exit any of the steps by pressing RECEIVER. To go back a step, press RETURN.
VSX_918_818_KU.book 50 ページ 2008年5月15日 09 木曜日 午後6時46分 Controlling the rest of your system Selecting preset codes directly Direct function • Default setting: ON RECEIVER MULTI CONTROL TV CTRL TV DVR DVD CD-R CD TUNER DISP CLASS MPX D.ACCESS MIDNIGHT ANALOG ATT DIMMER SLEEP SIGNAL SEL SR+ ENTER SOURCE INPUT SELECT XM SIRIUS FM AM STEREO/ PORTABLE DISC +10 iPod CTRL iPod RECEIVER TV CONTROL INFO INPUT 1 While pressing the RECEIVER button, press and hold the ‘1’ button.
VSX_918_818_KU.book 51 ページ 2008年5月15日 木曜日 午後6時46分 Controlling the rest of your system 09 This remote control can control components after entering the proper codes or teaching the receiver the commands (see Controlling the rest of your system on page 49 for more on this). Use the MULTI CONTROL buttons to select the component Button(s) TV Function Components Switches the DTV on or off. DTV Switches the TV or CATV between standby and on.
VSX_918_818_KU.book 52 ページ 2008年5月15日 09 木曜日 午後6時46分 Controlling the rest of your system Controls for other components This remote control can control these components after entering the proper codes or teaching the receiver the commands (see Controlling the rest of your system on page 49 for more on this). Use the MULTI CONTROL buttons to select the component. Button(s) Function SOURCE Press to switch the component between standby and on.
VSX_918_818_KU.book 53 ページ 2008年5月15日 木曜日 午後6時46分 Controlling the rest of your system 09 Function Components ENTER/ DISC Chooses the disc. Multiple CD player Ejects the disc. MD player DVD player DVR player Changes sides of the LD. LD player TOP MENU Displays the disc ‘top’ menu of a DVD player. DVD/DVR player Pauses the tape. Cassette deck Stops the tape. Cassette deck ENTER Starts playback. Cassette deck / Fast rewinds/fast forwards the tape.
VSX_918_818_KU.book 54 ページ 2008年5月15日 09 木曜日 午後6時46分 Controlling the rest of your system Preset Code List You should have no problem controlling a component if you find the manufacturer in this list, but please note that there are cases where codes for the manufacturer in the list will not work for the model that you are using. There are also cases where only certain functions may be controllable after assigning the proper preset code.
VSX_918_818_KU.book 55 ページ 2008年5月15日 木曜日 午後6時46分 Other connections 10 Chapter 10: English Other connections Connecting your iPod to the receiver Caution Connecting an iPod AM SIRIUS AUX MASTER VOLUME iPod DIRECT 3 Use the TOP MENU button to display iPod Top menu. When the display shows Top Menu you’re ready to play music from the iPod.2 • If after pressing iPod the display shows No Connection, try switching off the receiver and reconnecting the iPod to the receiver.
VSX_918_818_KU.book 56 ページ 2008年5月15日 10 木曜日 午後6時46分 Other connections iPod playback To navigate songs on your iPod, you can take advantage of the OSD of your TV connected to this receiver.1 You can also control all operations for music in the front panel display of this receiver. Tip • You can play all of the songs in a particular category by selecting the All item at the top of each category list. For example, you can play all the songs by a particular artist.
VSX_918_818_KU.book 57 ページ 2008年5月15日 木曜日 午後6時46分 Other connections 10 Switching the iPod controls1 HDMI IN DIGITAL IN CD CONTROL (DVD / BD) IN 1 OPT OUT IN CD-R / TAPE / MD OUT 2 (TV / SAT) IN AM LOOP REC DVD / BD IN FRONT DVD / BD IN SUB WOOFER PREOUT TV / SAT IN MONITOR OUT DVR / VCR IN DVR / VCR OUT DVD5.1 CH INPUT OUT XM IN TV / SAT IN IN DIGITAL IN COAX 1 OUT (DVD / BD) (ASSIGNABLE) (ASSIGNABLE) DVR / VCR AUDIO R SU D 5.
VSX_918_818_KU.book 58 ページ 2008年5月15日 10 木曜日 午後6時46分 Other connections Listening to XM Radio After connecting, you will be able to use this receiver to select channels and navigate categories using the on-screen display.
VSX_918_818_KU.book 59 ページ 2008年5月15日 木曜日 午後6時46分 Other connections 10 About XM You will need to have some presets stored to do this. About XM Radio 2 Press / to select the channel preset you want. You can also use the number buttons on the remote control to recall the channel preset. The XM Menu provides additional XM Radio features. 1 Press TOP MENU. 3 When you’re finished press TOP MENU to return to the reception display.
VSX_918_818_KU.book 60 ページ 2008年5月15日 10 木曜日 午後6時46分 Other connections programming. There are three places to find your eight character XM Radio ID: On the XM Mini-Tuner, on the XM Mini-Tuner package, and on XM Channel 0. Record the Radio ID in the following eight squares for reference. Note: The XM Radio ID does not use the letters “I”, “O”, “S” or “F”. Activate your XM Satellite Radio service in the U.S. online at http://activate.xmradio.com or call 1-800-XMRADIO (1-800-967-2346).
VSX_918_818_KU.book 61 ページ 2008年5月15日 木曜日 午後6時46分 Other connections 10 After connecting, you will be able to use this receiver to select channels and navigate categories using the on-screen display.2 The information displayed is as follows: A Decades A0 The '50s SR005 Channel number Artist name Johnny B. Good Song name Composer name Channel name Selecting channels and browsing by genre SIRIUS Decades SIRIUS CH Guide A0 SR005 Chuck Berry Johnny B.
VSX_918_818_KU.book 62 ページ 2008年5月15日 10 木曜日 午後6時46分 Other connections 1 Press CLASS (SHIFT+2) to select the class in which the channel is stored. Press repeatedly to cycle through classes A, B and C. 2 Press / to select the channel preset you want. • You can also use the number buttons on the remote control to recall the channel preset.
VSX_918_818_KU.book 63 ページ 2008年5月15日 木曜日 午後6時46分 Other connections 10 • On-screen volume display. • On-screen display of listening mode. • Automatic video input switching on the flat panel TV. • Automatic volume muting on the flat panel TV.2 See also SR+ Setup for Pioneer flat panel TVs on page 66 for more on setting up the receiver. TUNER DISP CLASS MPX D.
VSX_918_818_KU.book 64 ページ 2008年5月15日 11 木曜日 午後6時46分 Other Settings Chapter 11: Other Settings Assigning the digital inputs • Default settings: The Input Assign menu You only need to make settings in the Input Assign menu if you didn’t hook up your digital equipment according to the default settings for the digital inputs, or if you have connected equipment using component video cables. 1 Press RECEIVER on the remote control, then press the SETUP button.
VSX_918_818_KU.book 65 ページ 2008年5月15日 木曜日 午後6時46分 Other Settings 11 Assigning the component video inputs Assigning the HDMI inputs • Default settings: HDMI - 1 – DVD HDMI - 2 – TV If you used HDMI to connect your video equipment, you must tell the receiver which input terminal(s) you have used, so that you see the proper video signal when you select the input source. 1 Select ‘HDMI Input’ from the Input Assign menu. a.Digital Input b.Component Input c.HDMI Input 4b.Component Input a.
VSX_918_818_KU.book 66 ページ 2008年5月15日 11 (VSX-918V model only) SR+ Setup for Pioneer flat panel TVs Make the following settings if you have connected a Pioneer flat panel TV to this receiver using an SR+ cable. Note that the number of settings available will depend on the flat panel TV you’ve connected. See also Using this receiver with a Pioneer flat panel TV on page 62. 1 Press RECEIVER on the remote control, then press the SETUP button. An on-screen display (OSD) appears on your TV.
VSX_918_818_KU.book 67 ページ 2008年5月15日 木曜日 午後6時46分 Additional information 12 Chapter 12: • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. Remedy The power does not turn on. • Disconnect the power plug from the outlet, and insert again. • Make sure there are no loose strands of speaker wire touching the rear panel.
VSX_918_818_KU.book 68 ページ 2008年5月15日 12 木曜日 午後6時46分 Additional information Problem Remedy Considerable noise in radio broadcasts. • Connect the antenna (page 19) and adjust the position for best reception. • Route any loose cables away from the antenna terminals and wires. • Fully extend the FM wire antenna, position for best reception, and secure to a wall (or connect an outdoor FM antenna). • Connect an additional internal or external AM antenna (page 19).
VSX_918_818_KU.book 69 ページ 2008年5月15日 木曜日 午後6時46分 Additional information 12 No sound, or sound suddenly ceases. • If you’ve made separate connections for audio, make sure you have assigned the analog/digital jack(s) to the corresponding HDMI input for the component. See Assigning the HDMI inputs on page 65 to do this. • Check the audio output settings of the source component. • VSX-918V model only: – Check that the AV Parameter setting is set to HDMI AMP/THRU (refer to page 35).
VSX_918_818_KU.book 70 ページ 2008年5月15日 12 木曜日 午後6時46分 Additional information iPod messages Symptom Cause Error I1 There is a problem with the signal path from the Switch off the amplifier and reconnect the iPod iPod to the amplifier. to the amplifier. If this doesn’t seem to work, try resetting your iPod. Error I2 The software version being used with the iPod needs to be updated.
VSX_918_818_KU.book 71 ページ 2008年5月15日 木曜日 午後6時46分 Additional information 12 –––––––– No artist name or song title is available for this selection. No action required. Upgrade XM Tuner The connected XM CNP-1000 is incompatible. Contact XM Listener Care (1-800-967-2346) and This receiver features advanced technology that ask about upgrading your XM CNP-1000 to an is designed for use with the XM Mini-Tuner. XM Mini-Tuner.
VSX_918_818_KU.book 72 ページ 2008年5月15日 12 木曜日 午後6時46分 Additional information Resetting the main unit Specifications Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. Amplifier section 1 Front . . .95 W (20 Hz to 20 kHz, THD 0.2 %, 8 Ω)1 Switch the receiver into standby. 2 While holding down the ADVANCED SURROUND button, press and hold the STANDBY/ON button for about three seconds.
VSX_918_818_KU.book 73 ページ 2008年5月15日 木曜日 午後6時46分 Additional information Video Section Input (Sensitivity/Impedance) DVR/VCR, DVD/BD, TV/SAT . . . . . . . 1 Vp-p/75 Ω • Output (Level/Impedance) AM Tuner Section Frequency Range . . . . . . . . . 530 kHz to 1700 kHz Sensitivity (IHF, Loop antenna) . . . . . . . 350 µV/m Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . 50 dB Antenna . . . . . . . . . . . . . . . . . . . . . . Loop antenna DVR/VCR, DVD/BD, TV/SAT MONITOR . . . . .
VSX_918_818_KU.book 74 ページ 2008年5月15日 12 木曜日 午後6時46分 Additional information We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
VSX_918_818_KU.book 75 ページ 2008年5月15日 木曜日 PIONEER ELECTRONICS (USA) INC. 午後6時46分 PIONEER ELECTRONICS OF CANADA, INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSA in the U.S.A.
VSX_918_818_KU.book 76 ページ 2008年5月15日 木曜日 午後6時46分 Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 1–800–421–1404 Please do not ship your product to Pioneer without first calling the Customer Support at the above listed number for assistance. Pioneer Electronics Service, Inc. P.O.