User manual

Intelligent Picture Control
25
GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
2 Press the OK or ❿ .
Result: The Setup menu is displayed.
3 Press the corresponding  , ❷ buttons to select the User
Set option.
4 Press the OK or ❿ buttons to select this option.
Result
: The User Set menu is displayed.
5 Press the corresponding  or ❷ buttons, until the IPC option
is selected.
6 Press the Ok or ❿ buttons to select the IPC (intelligent picture
control) option.
➢ When intelligent picture control mode is On, the
sharpness of the image is adjusted automatically.
7 To adjust the sharpness manually, press the ❷
button to turn
the IPC mode
Off.
8 Press the ➛ or ❿ buttons until the picture is displayed according
to your preferences.
➢ If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9 On completion, press the RETURN button.
➢ You can also directly Select function using IPC button
on the remote control.
Clock Set
Colour System : Auto
NICAM : On
IPC : On
VideoPlus Extend : Off
User Set
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
On
Off
VCR
00444A DVD-CM250/XEU-GB2 5/12/04 1:42 PM Page 25