User's Manual

English _57
● NAVIGATING THE SETUP MENU
3
Press the π/† buttons
to select Anynet+(HDMI-
CEC), then press the ®
or ENTER button.
4
Set the Anynet+(HDMI-
CEC) to “On”on your DVD
Player., then press the ®
or ENTER button.
1
Press the MENU button.
2
Press the √/® buttons
to select HDMI Page,
then press the † or
ENTER button.
▼
To make the setup menu disappear, press the
MENU button.
Setting Up The Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate this DVD Player using a Samsung TV
remote control. This is done by connecting the DVD player to a SAMSUNG TV using an HDMI
Cable. (see pages 12-13) This is only available with SAMSUNG TVs that support Anynet+.
To operate Anynet+, you must turn Anynet+(HDMI-CEC) On in the Setup Menu.
5
Set the Anynet+ function on
your Samsung TV. (See your
TV instruction manual for
more information.).
• When you press Anynet+
button on the TV remote
control, the OSD to the right
will appear.
View TV
Select Device
®
Menu on Device
Device Operation
Setup
Receiver : Off
®
®
®
®
®
Record
®
Exit
Move
ENTER
DVP
V
i
ew
TV
®
TV Menu
-- HDMI Page --
HDMI Auto
Anynet +(HDMI-CEC) On
Picture Quality
BD Wise Off
-- HDMI Page --
HDMI Auto
Anynet +(HDMI-CEC) On
Picture Quality
BD Wise Off
-- HDMI Page --
HDMI Auto
Anynet +(HDMI-CEC) On
Picture Quality
BD Wise Off
On
Off