User Manual

English - 23
Connecting & Setting Up
Case 3: Connecting to an AV
amplifier with a digital output jack
If your AV amplifier has a Dolby Digital, MPEG2
or DTS decoder and a digital input jack, use this
connection. To enjoy Dolby Digital, MPEG2 or
DTS sound, you will need to set up the audio
settings.
According to your amplifier, connect to an optical
cable or a coaxial cable.(See pages 38~39)
Case 2 : Connecting to a stereo
amplifier with AV output jacks
If your stereo amplifier only has AUDIO INPUT
jacks(L and R), use the AUDIO OUT jacks.
whitered
whitered
Front(L)
speaker
Front(R)
speaker
Rear(L)
Front(L)
Subwoofer Centre
Front(R)
Rear(R)
or
01082E_HR735_EUR_01~58 4/11/06 8:46 PM Page 23