DVD-HR773 DVD-HR775 DVD-HR777 DVD user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
getting started WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
PRECAUTION Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
getting started Maintenance of Cabinet For safety reasons, be sure to disconnect the AC power cord from the AC outlet. • Do not use benzene, thinner, or other solvents for cleaning. • Wipe the cabinet with a soft cloth. HDD (Hard Disk Drive) The hard disk has a high storage density, which enables long recording durations and quick access to written data. However, it can easily be damaged by shock, vibration or dust and should be kept away from magnets.
• Keep in a clean protection jacket. • If you move your HDD & DVD RECORDER suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. Disc Specifications This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD.
getting started • In both modes, playback can be performed before and after finalisation, but additional recording, deleting and editing can not be performed after finalisation. • If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost. • A DVD-RW blank disc is initialized to VR Mode when first initialized.
COPY PROTECTION • Many DVD discs are encoded with copy protection. Because of this, you should only connect your HDD & DVD RECORDER directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. • This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
getting started Do not use the following discs! • LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product. [Note] Disc types that can be played : CD/CD-R/-RW/MP3/JPEG/DVD-Video/DVD-RAM/±RW/±R. For a DVD-RW/-R disc, which has been recorded in Video Mode on another component, it can play only when finalised. • Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.
• TPL ( Target Peripheral List ) Since this product is not a Windows XP but a embedded USB host system, naturally the supported USB devices cannot help being limited. The USB host functionality and compatibility of this product have been proved with following items.
contents GETTING STARTED 2 CONNECTING & SETTING UP 22 2 3 12 13 14 16 18 21 Warning Precaution General Features Before reading the user’s manual How to use the HDD & DVD RECORDER Unpacking Description Tour of the Remote Control 22 23 24 30 32 33 Connecting the HDD & DVD RECORDER Additional connections Antenna + HDD & DVD RECORDER + External decoder box + TV Other type of connecting the Video output cable Other type of connecting the Audio output cable Connecting HDMI/DVI to a TV Connecting to AV 3 IN
RECORDING 66 81 REFERENCE Recordable Discs Recording Formats Recording Mode Unrecordable pictures Recording immediately Copying from a Camcorder Making a One Touch Recording (OTR) Simultaneous Recording and Playback Time Shift function as a live signal Making a Timer Recording Using the ShowView Feature ShowView Extended Go To Recorded List 81 85 86 87 87 92 93 95 96 Basic Editing (Title List) Using the Sort function (Title List) Navigation Menu Select Contents Advanced Editing (Playlist) Copying from
getting started GENERAL FEATURES This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD. You can also edit digital images on DVD-RAM/±RW discs or HDD. HDD Recording • DVD-HR773 You can record up to Approx. 264 hours of video (in EP mode (8 Hours)) on the internal 160GB (gigabyte) hard disk (HDD). • DVD-HR775 You can record up to Approx. 421 hours of video (in EP mode (8 Hours)) on the internal 250GB (gigabyte) hard disk (HDD).
BEFORE READING THE USER’S MANUAL Make sure to check the following terms before reading the user manual. Icons that will be used in manual Icon Definition HDD This involves a function available on the HDD. DVD This involves a function available on DVD or DVD±R/-RW(V) discs that have been finalised. RAM This involves a function available on DVD-RAM. -RW This involves a function available on DVD-RW. -R +RW +R This involves a function available on DVD-R. This involves a function available on DVD+RW.
getting started HOW TO USE THE HDD & DVD RECORDER Step 1: Select the disc type or HDD Please check available disc type before recording. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVD±R. You can record files directly to the built-in HDD or edit a recorded file.
Step 3 : Recording There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classified as follows: Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc. Step 4 : Playing A DVD consists of sections, called titles, and sub- sections, called chapters.
getting started UNPACKING Accessories Check for the supplied accessories below. USB PAUSE REPEAT Video/Audio Cable RF Cable for TV Remote Control Batteries for Remote Control (AAA Size) Instruction Manual Quick Guide Preparing the Remote Control Install Batteries in the Remote Control • Open the battery cover on the back of the remote control. • Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly. • Replace the battery cover.
Controllable TV Codes BRAND BUTTON SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09 BRAND NOBLEX NOKIA BUTTON 66 AIWA 82 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 NORDMENDE 72, 73, 75 BANG & OLUFSEN 57 PANASONIC 53, 54, 74, 75 BLAUPUNKT 71 PHILIPS 06, 55, 56, 57 BRANDT 73 PHONOLA 06, 56, 57 BRIONVEGA 57 PIONEER 58, 59, 73, 74 52 RADIOLA 75 RADIOMARELLI 06, 56 57 DAEWOO 19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 RCA 45, 46 EMERSON 64 REX 74 FERGUSON SABA 73 FIN
getting started DESCRIPTION Front Panel 1 2 8 12 11 10 3 7 6 5 4 9 OPEN/CLOSE button Opens and closes the disc tray. DISPLAY Displays the playing status, time, etc. PLAY/PAUSE button Plays a disc or pauses playback. SEARCH/SKIP buttons Goes to the next title/chapter/track or goes back to the previous title/chapter/track. (Playback mode) Select TV preset Channels. (Stop mode) STOP button Stops disc playback. REC button Starts recording. HDD/DVD button Selects HDD/DVD mode.
Rear Panel Fan 1 3 2 4 5 GETTING STARTED The fan always revolves when the power is on. Ensure a minimum of 10 cm clear space on all sides of the fan when installing the product. 6 7 8 9 10 1 In from aerial connector Connects RF cable from antenna. 2 Out to TV connector Connects RF cable to TV antenna input. 3 AV2(EXT) INPUT SCART connector Connects to equipment having SCART output jack. 4 AV1(TV) OUTPUT SCART connector Connects to equipment having SCART input jack.
getting started Front Panel Display 10 Playback-related, Open/Close indicator Lights when playback-related and open/close buttons are selected. In Disc Indicator Lights status icon. DVD VIEW Indicator Lights when DVD mode is selected. HDD VIEW Indicator Lights when HDD mode is selected. USB VIEW Indicator Lights when USB mode is selected. Disc Media Indicator Lights when a DVD±RW/±R disc is loaded. TIMER Indicator Lights to indicate the timer record mode.
TOUR OF THE REMOTE CONTROL Your HDD & DVD RECORDER remote control will work with Samsung televisions and compatible brands. Installing batteries in the Remote Control 2. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. TV button USB Press this to operate TV. 3. Replace the cover. Assuming typical TV usage, the batteries last for about one year.
connecting & setting up CONNECTING THE HDD & DVD RECORDER This section involves various methods of connecting the HDD & DVD RECORDER to other external components and required initial setting modes. You can connect your HDD & DVD RECORDER to the television using the SCART cable if the appropriate input is available on the television. 1. Connect the RF cable as shown. 2. Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD RECORDER. 3.
ADDITIONAL CONNECTIONS You can connect your HDD & DVD RECORDER to a satellite or digital tuner. CONNECTING & SETTING UP External device (VCR/Satellite receiver) - DVD mode 1. Connect the AV2 connector of HDD & DVD RECORDER and VCR/Satellite receiver or digital tuner using a SCART cable. 2. Connect the AV1 connector to the SCART AV connector on TV. 3. Turn on the HDD & DVD RECORDER, VCR/Satellite receiver or digital tuner and TV. 4. Set Input mode on AV2. - TV mode 1.
connecting & setting up ANTENNA + HDD & DVD RECORDER + EXTERNAL DECODER BOX + TV If you connect external decoder box to HDD & DVD RECORDER, you can record scrambled channels (CANAL+ or Premiere broadcasts) received through the built-in TV tuner in HDD & DVD RECORDER. Wall 3 DECODER 1. Connect RF antenna cables as shown. 2. Connect the AV1 connector on this recorder to the SCART AV connector on TV using a SCART cable. 3. Connect the AV2 connector to a SCART AV connector on decoder box. 4.
OTHER TYPE OF CONNECTING THE VIDEO OUTPUT CABLE There are several ways to output a video signal not using scart cables. Select one of the following video connections that best suits. • Case 1 : Connecting to a Video (Composite) output jack • Case 2 : Component Video output jacks Case 1 : Connecting to a Video (Composite) output jack 1. Connect a video (Yellow) cable between the VIDEO (yellow) OUT jack on HDD & DVD RECORDER and VIDEO (yellow) INPUT jack on your TV (or AV amplifier).
connecting & setting up Case 2 : Component Video output jacks 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y, PB, PR) jacks on HDD & DVD RECORDER and COMPONENT IN(Y, PB, PR) jacks on your TV. • You will enjoy high quality and accurate colour reproduction images. 2. Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier). (See pages 27~29). 3. After connecting, refer to the page 43.
OTHER TYPE OF CONNECTING THE AUDIO OUTPUT CABLE Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
connecting & setting up Case 2 : Connecting to a stereo amplifier with AV output jacks If your stereo amplifier only has AUDIO INPUT jacks (L and R), use the AUDIO OUT jacks Red White 28_ connecting & setting up Front(L) speaker Front(R) speaker
Case 3: Connecting to an AV amplifier with a digital output jack If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings. According to your amplifier, connect to an optical cable or a coaxial cable.
connecting & setting up CONNECTING HDMI/DVI TO A TV If your TV has a HDMI/DVI input, connect HDMI/DVI Adapter cable to a TV. You will enjoy the best quality images and sounds. • Case 1 : Connecting to a TV with HDMI Jack • Case 2 : Connecting to a TV with DVI Jack Case 1 : Connecting to a TV with HDMI Jack • Using the HDMI cable (not supplied) connect the HDMI OUT jack on the rear of the HDD & DVD RECORDER to the HDMI IN jack of your TV.
J CONNECTING & SETTING UP Red White To use HDMI cable (not supplied), make the Audio/Video connection before plugging in the power cord or after finishing the “Plug & Play Setup.” Do not connect the HDMI cable while the “Plug & Play Setup” is progressing. Progressive scan automatically activates when HDMI is connected. If TV/HDMI Receiver does not support DTS, Audio output is not available when you play disc in DTS format. You can switch from the HDMI output to other output only in stop mode.
connecting & setting up CONNECTING TO AV 3 IN, DV INPUT JACK This allows you to connect your HDD & DVD RECORDER to other external devices and view or record their outputs. • Case 1 : Connecting a VCR, Set-Top Box(STB), DVD player or Camcorder to the AV 3 IN jacks • Case 2 : Connecting a DV Device to the DV IN jack Case 1 : Connecting a VCR, Set-Top Box(STB), DVD player or Camcorder to the AV 3 IN jacks Connecting a VCR or external device to AV 3 IN jacks of the HDD & DVD RECORDER.
Case 2 : Connecting a Camcorder to the DV IN jack If your digital camcorder has a DV output jack, connect it to the DV input jack of your HDD & DVD RECORDER. CONNECTING & SETTING UP Camcorder M If the input is not selected automatically, use INPUT SEL. button to select proper input. CONNECTING TO USB DEVICES This allows you to connect your HDD & DVD RECORDER to USB devices. Connecting a USB memory, MP3 player, Digital Camera to the USB HOST.
system setup ON-SCREEN MENU NAVIGATION The on-screen menus allow you to enable or disable various functions on your HDD & DVD RECORDER. Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus. 1. ▲▼, ◄► buttons Press these buttons on the remote control to move the selection bar ▲▼, ◄► to cycle through the menu options. 2. OK button Press this button on the remote control to confirm any new settings. 3.
6. Auto channel scan will be started. • The number of stations automatically stored by the HDD & DVD RECORDER depends on the number of stations that it has found. 7. After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. Auto channel scan completed successfully. Press the [OK] button to auto clock set. OK 8. Wait until current date and time are displayed automatically.
system setup SETTING THE CLOCK This menu is used to set the current time. You need to set the time to use timer recording. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select System, then press the OK or ► button. 4. Press the ▲▼ buttons to select Clock Set, then press the OK or ► button. Press the ▲▼◄► buttons to input Month, Day, Year, Hour or Minute.
4. Press the ▲▼ buttons to select Auto Setup, then press the OK or ► button. The message “Your data will be lost. Press [OK] to continue, [RETURN] to exit.” is displayed. 5. Press the OK button, then press the ▲▼◄► buttons to select your Country. • The HDD & DVD RECORDER searches for the stations according to a preset preference list corresponding to the country that you have selected. (See page 34) 6. Press the OK button. Channel scan will be started.
system setup SETTING UP THE LANGUAGE OPTIONS If you set the language options, in advance, they will come up automatically every time you watch a movie. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Language, then press the OK or ► button. Language setup menu will be displayed. 4. Press the ▲▼ buttons to select the desired language option, press the OK or ► button.
Anynet+ (HDMI CEC) Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the HDD & DVD RECORDER to a SAMSUNG TV using an HDMI Cable. (See pages 30~31) (This is only available with SAMSUNG TVs that support Anynet+.) HDD & DVD RECORDER HDD Library Timer Record Disc Manager System | Clock Set Auto Power Off : Off | Anynet+ (HDMI CEC)Off : On | | DivX(R) RegistrationOn Setup 1.
system setup SETTING UP THE AUDIO OPTIONS You can connect the HDD & DVD RECORDER to an external amp or Home theatre. Allows you to setup the Audio device and sound status depending on the audio system in use. You can also set NICAM mode. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Audio, then press the OK or ► button. 4.
DRC HDD & DVD RECORDER HDD Library Timer Record Audio Digital Output : PCM | DTS : Off | : On | : On | DRC Disc Manager Off On NICAM Setup mMOVE sSELECT rRETURN eEXIT NICAM NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.
system setup 3D Noise Reduction (motion adaptive noise reduction) • Off : Normal • On : Provides a clear picture through noise reduction (for recording).
Video Output HDD & DVD RECORDER HDD Library Timer Record Disc Manager Setup mMOVE Video TV Aspect : 16:9 Wide | 3D Noise Reduction : Off | HDMI Resolution : 576P | Video Output : Component Component Component Output RGB : Interlace sSELECT rRETURN | eEXIT In Component mode, you can set video output to Progressive or Interlace. When the HDMI cable (not supplied) is not connected, available video output jacks are as follow.
system setup SETTING UP THE PARENTAL LOCK Z The Parental Lock function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Parental Lock, then press the OK or ► button.
SETTING UP THE RECORDING OPTIONS Automatic Chapter Creator CVKL (V-mode) A DVD-Video consists of ‘Titles’ and ‘Chapters’. When you record one programme, it makes one Title. If you use this function, the Title will be divided into Chapters. 2. Press the ▲▼ buttons to select Recording, then press the OK or ► button. HDD & DVD RECORDER DVD-RW(V) Library Timer Record Disc Manager 3. Press the ▲▼ buttons to select Chapter Creator, then press the OK or ► button. 4.
system setup EZ Record CVKL (V-mode) This function allows you to Initialise and Finalise a disc automatically. 1. Press the ▲▼ buttons to select EZ Record, then press the OK or ► button. 2. Press the ▲▼ buttons to select On, then press the OK or ► button. Press the EXIT ( ) button to exit the menu. 3. Insert a disc. If the disc is new, it will initialise automatically.
playback This section introduces basic functions of playback and playback by disc type. Read the following information before playing a disc. REGION CODE (DVD-VIDEO ONLY) 2 ALL LOGOS OF DISCS THAT CAN BE PLAYED STEREO CREATOR Dolby Digital Stereo DTS PAL broadcast system in U.K, France, Germany, etc. Digital Audio DivX MP3 DISC TYPES THAT CAN BE PLAYED Disc Types DVD-VIDEO Disc Logo content Recorded content Disc Shape Max. Playing Time Single sided(12cm) 240 min.
playback Disc Types Disc Logo content Recorded content Disc Shape Max. Playing Time 1 hr. (XP: Excellent Quality) DVD-RAM Single Layer(12cm) 2 hrs. (SP: Standard Quality) (4.7GB) 4 hrs. (LP: Long Playback) AUDIO 6 or 8 hrs. (EP: Extended) VIDEO 2 hr. (XP: Excellent Quality) Dual Layer(12cm) 4 hrs. (SP: Standard Quality) (9.4GB) 8 hrs. (LP: Long Playback) 12 or 16 hrs. (EP: Extended) 1 hr. (XP: Excellent Quality) DVD-RW AUDIO VIDEO 12cm (4.7GB) 2 hrs. (SP: Standard Quality) 4 hrs.
Discs that cannot be played • • • • DVD-Video with a region number other than “2” or “ALL” 3.9 GB DVD-R Disc for Authoring. DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard A DVD±R/DVD-RW(V) disc which has been recorded and not finalised in a different manufacturer’s recorder. • DVD-ROM/PD/MV-Disc, etc • CVD/CD-ROM/CDV/CD-G/CD-I This HDD & DVD RECORDER can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
playback USING THE DISC MENU & TITLE MENU Some type of discs contain a dedicated menu system that allows you to select special functions for title, chapter, audio track, subtitle, film preview, information on characters, etc. For DVD-VIDEO Disc Z • Disc Menu : Press the DISC MENU button to enter the disc menu of the disc. • Move to the setup menu related to playback operation. • You can select audio language and subtitle etc. provided by the disc.
Skipping Chapters, Titles or Markers SZXCVBKL During play, press the SKIP ( ) buttons on the remote control. Slow Motion Play SZXCVKLD In pause mode, press the SEARCH ( ) buttons on the remote control. • If you press the SEARCH ( ) button, 1/2 1/4 1/8 • If you press the SEARCH ( ) button, 1/2 1/4 1/8 • To return to normal speed playback, press the PLAY ( ) button. ) buttons during pause, the disc will play slowly at 1/4 speed.
playback USING THE INFO BUTTON The INFO function allows you to easily search for a desired scene by accessing title, chapter, or time. You can also change the subtitle and audio settings and set some features including Angle, Repeat, and Zoom. Moving to a scene directly using the INFO SZXCVKLD If you want to move to a certain title, chapter or time, use this function. 1. Press the INFO button during playback. 2. Press the ▲▼ buttons to select Search, then press the OK or ► button. 3.
SELECTING THE SOUNDTRACKS & AUDIO CHANNELS SZXCKLD Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV programmes. You can also operate this function by pressing the AUDIO button on the remote control. 1. Press the INFO button during playback. 2. Press the ▲▼ buttons to select Audio. PLAYBACK 3. Press the ◄► buttons to select the desired soundtracks or audio channel. M Soundtracks or Audio channel may be different because they are disc-specific.
playback Repeat A-B SZXCVKL 1. Press the INFO button during playback. Repeat 2. Press the ▲▼ buttons to select Repeat. A-B > 3. Press the ◄► buttons to select A-B, then press the OK button. 4. Press the OK button at the point where you want the repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts.
USING MARKERS SXC (VR mode) Set marks at scenes you want to see again so that you can start playback from the marked position. Setting Markers 1. Press the MARKER button during playback. Marker 01 02 -- -- -- -- -- -- -- -- N:2 3. Press the ► button to move to the next position. 4. Press the OK button again when the desired scene appears. • The number 02 is displayed and the scene is memorized.
playback USING THE BOOKMARKS ZCVKL (V mode) Setting Bookmarks 1. Press the MARKER button during playback. Bookmark 2. Press the OK button when the desired scene appears. • The number 1 is displayed and the scene is memorized. 1 2 - - - - - - - -- 3. Press the ► button to move to the next position. 4. Press the OK button again when the desired scene appears. The number 2 is displayed and the scene is memorized. • Repeat above to bookmark other positions. • You can bookmark up to 10 scenes.
PLAYING AN AUDIO CD/MP3 Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback 2 3 2 5 5 9 6 10 11 7 8 REPEAT 1 SKIP ( page. ) button : Moves to the previous or next 2 Press the SEARCH ( ) buttons : Fast Play (X 2, X 4, X 8) (Audio CD only) 3 STOP ( 4 PAUSE ( 5 PLAY ( 6 ▲▼ : Selects a track (song). 7 RED(A) button : • Creates a playlist or go to playlist. • Select All : MP3, CD-DA • Copy : MP3 • CD Import : Audio CD 8 GREEN(B) button : Selects the sort order.
playback Playing an MP3 Disc 1. Insert an MP3 disc into the disc tray. • The menu is displayed 2. Press the buttons to select Library, then press the OK or ► button. 3. Press the buttons to select Music, then press the OK or ► button. 4. Press the buttons to select the track you want to hear, and then press the OK button. MP3 Screen Elements ➀ CD Q Song 1.mp3 Music List 1/9 No. Title Size Y ROOT ➁ ➂ ➃ ► 00:02:22 9 Song 1.mp3 E ROOT Edit Sort #/$ PREVIOUS/NEXT PAGE Q Song 1.mp3 3.
CD Import o 1. Press the RED(A) button during the Music List playback. 2. Press the buttons to select CD Import, then press the OK or ► button. 4. Press the ►▲▼ buttons to select the target media,then press the OK button. • You can create a new folder by pressing the GREEN(B) button. 5. Press the RED(A) button to select Start Copy. The message “Number of file : x” is displayed. 6. Press the ◄► buttons to select Start, then press the OK button. File copy begins.
playback Go To Playlist oA 1. Press the RED(A) button during the Music List playback. 2. Press the ▲▼ buttons to select Go To Playlist, then press the OK or ► button. CD Playlist q U No. Title Length Y PLAYLIST E PLAYLIST01 3. Press the ▲▼ buttons to select the desired playlist folder, then press the OK button. The selected tracks are played automatically. ► 00:02:22 Y PLAYLIST mMOVE sSELECT a CHECK eEXIT Delete the Playlist oA 1.
Go To Music List oA 1. Press the BLUE(D) button during the Playlist playback. The Music List will be displayed. CD Q TRACK04 Playlist 1/4 U No. Title Y PLAYLIST01 R Length TRACK04 4:03 002 TRACK02 3:57 ► 00:02:22 003 TRACK06 5:08 I TRACK04 k PLAYLIST01 004 TRACK01 4:19 New Playlist Music List eEXIT Using the Sort A When you need to change the Sort order of Music List, you can change it simply. CD Q Song 10.mp3 Music List 1/10 No. 1.
playback VIEWING A PICTURE G 1. Insert a JPEG disc into the disc tray. • The menu is displayed 2. Press the ▲▼ buttons to select Library, then press the OK or ► button. 3. Press the ▲▼ buttons to select Photo, then press the OK or ► button. • To see the next 8 pictures, press the SKIP ( ) button. • To see the previous 8 pictures, press the SKIP( ) button. CD Image 1.jpg Photo List 1/17 ROOT Image 1.jpg Image 10.jpg Image 11.jpg Image 13.jpg Image 14.jpg Image 15.jpg Image 16.
Zoom To setup, follow steps 1 to 4 in page 62. 5-1. Press the YELLOW(C) button to select Zoom. 6. Each time the OK button is pressed, the picture is enlarged up to 4x (four times the normal size). ➞ X2 ➞ X4 ➞ X2 ➞ Normal • You can go to Photo List by pressing YELLOW(C) button. PLAYBACK ❖ To stop the Zoom Press the GREEN(B), STOP ( ) or RETURN button. Go To Photo List To setup, follow steps 1 to 4 in page 62. 5-1. Press the RETURN button to go to Photo List.
playback PLAYING A DIVX N Using the MENU button 1. Insert a DivX disc into the disc tray. • The menu is displayed CD Movie_01.avi DivX List 1/1 No. 2. Press the ▲▼ buttons to select Library, then press the OK or ► button. 3. Press the ▲▼ buttons to select DivX, then press the OK or ► button. 4. Press the ▲▼ buttons to select the avi file (DivX), then press the OK or PLAY ( ) button. Title Size Y ROOT 001 Movie_01.avi 162.8MB 3 DivX E ROOT Edit Sort Subtitle Enc. Contents a CHECK eEXIT 5.
Western Afrikaans, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German, Icelandic, Indonesian, Italian, Malay, Norwegian, Portuguese, Spanish, Swahili, Swedish Central English, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian(Latin), Slovak, Slovenian Greek English, Greek Cyrillic English, Azeri, Belarusian, Bulgarian, Kazakh, Macedonian, Russian, Serbian, Tatar, Ukrainian, Uzbek If the subtitle language is displayed in broken fonts, change DivX Subtitle to th
recording This section shows various HDD & DVD Recording methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. RECORDABLE DISCS This HDD & DVD RECORDER can record on the following discs. HDD DVD-RAM DVD-RW DVD-R DVD+RW DVD+R • DVD-RAMs and DVD±RWs are rewritable. • DVD±Rs are non-rewritable.
M Finalise - This closes the DVD-RW/±R so no additional recording can be done. Unfinalise - This allows additional recording on a DVD-RW disc originally recorded on the HDD & DVD RECORDER. - A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalised. - A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised. - A DVD±R disc cannot be unfinalised. When you insert an unused disc, the following message appears.
recording RECORDING MODE Select one of four recording modes by pressing the REC MODE button repeatedly while the unit is in Stop mode for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording.
• DVD-HR777 Recording Times Recording Mode XP (high quality mode) SP (standard quality mode) LP (long recording mode) FR (Flexible Recording) M DVD-RAM/±RW/±R Approx. 68 hours Approx. 1 hour about 8.5 Mbps Approx. 135 hours Approx. 2 hours about 4.5 Mbps Approx. 270 hours Approx. 4 hours about 2 Mbps Approx. 405 hours Approx. 6 hours/ about 1.6 Mbps Approx. 534 hours Approx. 8 hours/ about 1.2 Mbps Approx. 68 hours ~ 534 hours Approx.
recording RECORDING IMMEDIATELY SXCVKL Before you start 1. Check that the disc has enough available space for the recording. 2. Press the HDD or DVD button. If you select DVD, Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display. Recording the current TV programme you are watching 1. Press the PROG ( ) or number buttons to select the current programme you want to record.
To pause recording • • • • Press the REC PAUSE button to pause a recording in progress. Press the REC PAUSE button again during pause to resume recording. ) buttons while recording pauses. You can switch channels by pressing the PROG ( If you select DV mode during rec pause, recording will be stopped. If you change the input source during rec pause in DV mode , recording will be stopped. To stop recording M You can not change the recording mode while recording.
recording To stop recording Press the STOP ( ) button to stop or finish a recording in progress. • When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a moment” is displayed. M To display playback related icons on the screen, press any direction button on the remote control. MAKING A ONE TOUCH RECORDING (OTR) SXCVKL You can set the HDD & DVD RECORDER to record in 30-minute increments up to 8 hours by pressing the REC button. 1. Press the HDD or DVD button.
SIMULTANEOUS RECORDING AND PLAYBACK S You can play back from the beginning of the programme you are currently recording. You can watch the previous title list while recording a programme. Using the PLAY ( ) button HDD ► Play RECORDING 1. With the unit in recording mode, press the PLAY ( ) button. It plays back the title that you are currently recording from the beginning. Playback is not available for 10 seconds from the start of recording.
recording TIME SHIFT FUNCTION AS A LIVE SIGNAL S This function replays recordings as a live signal. If you are interrupted while watching a TV programme, simply press the TIME SHIFT button, and the HDD & DVD RECORDER immediately starts recording the programme. Time Shift >CHANGE On sSELECT Using the Time Shift function 1. Press the TIME SHIFT button on the remote control. The Time Shift menu is displayed. 2. Press the ▲▼ button to select On, then press the OK button. 3.
MAKING A TIMER RECORDING SXCVKL 1. Check if the antenna cable is connected. 2. Check the remaining time of the disc. 3. Check if the date and time are correct. Make sure the Clock (Setup-Clock Set) is set before you proceed with a timer recording. (See page 36) 1. With the unit in Stop mode, press the TIMER button. 2. Press the ▲▼ buttons to select the Scheduled List, then press the OK or ► button. HDD & DVD RECORDER HDD Library Timer Record | ShowView | Scheduled List ShowView Extended 3.
recording • TITLE : To label the title name, press the RED(A) button. Title renaming screen appears. Follow steps 4 and 5 of “Renaming (Labelling) a Title” on pages 81~82. 5. After selecting the set up value for each mode, press the OK button to select Save. • ’ will appear on the front panel. It means that a timer recording is registered. If the timer settings overlap; The programmes are recorded in order of priority.
Adding a Scheduled List Follow these directions to add an entry from the Scheduled List To setup, follow steps 1 to 2 in “Making a Timer Recording” on page 75. 3. Press the ▲▼ buttons to select the number of the Scheduled List, then press the RED(A) button. • Set the items you want to add. See the “Making a Timer Recording” section for more information on Timer Recording Input items.(See pages 75~76) 4. Press the OK button to confirm the added setting. ) button after finishing the operation.
recording USING THE SHOWVIEW FEATURE SXCVKL Before setting your HDD & DVD Recorder to record. • Switch on both the television and your HDD & DVD RECORDER. • Check that the date and time are correct. Up to twelve programmes can be set to record. 1. With the unit in Stop mode, press the TIMER button. 2. Press the ▲▼ buttons to select ShowView, then press the OK or ► button. • A message is displayed to allow you to enter the ShowView code. 3.
SHOWVIEW EXTENDED To prevent delays or overruns, the HDD & DVD Recorder has a function called ShowView Extended allowing you to extend the recording time by up to 60 minutes. • Only use if PDC is not available or set to OFF. 1. With the unit in Stop mode, press the TIMER button. 2. Press the ▲▼ buttons to select ShowView Extended, then press the OK or ► button. HDD & DVD RECORDER HDD Library Timer Record | Scheduled List ShowView Extended Disc Manager Recorded List Setup ) button to exit the menu.
recording Clear Recorded List Clears all Recorded List at once. 3-1. Press the GREEN(B) button. HDD 4. Press the ◄► buttons to select Yes, then press the OK button. No.
editing BASIC EDITING (TITLE LIST) Playing the Title SXCVKL Follow these instructions to play back a scene from the Title List. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2. Press the ▲▼ buttons to select an entry you want to play from Title List, then press the OK or PLAY ( ) button. The selected entry (title) will be played back. HDD JAN/01/2008 17:30 PR1 Title List 1/3 No.
editing 5. Press the BLUE(D) button to select Save. The changed title name is displayed on the title item of the selected entry. HDD Rename Sports(A1) Back Space mMOVE Space sSELECT Clear rRETURN Save eEXIT Locking (Protecting) a Title SXCVKL Follow these instructions to lock an entry to protect it from accidental editing. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2.
Deleting a Title SXCVKL Follow these instructions to delete an entry from the Title List. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 3. Press the RED(A) button to select Edit. Edit menu is displayed. Title List 2/3 No.
editing Splitting a Section of a Title (Split) SK Follow these instructions to split a section of a Title List entry into two titles. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2. Press the ▲▼ buttons to select an entry you want to Split from the Title List, then press the RED(A) button. The Edit menu is displayed. 3. Press the ▲▼ buttons to select Split, then press the OK or ► button.
4. Press the OK button at the starting point. The image and starting point time is displayed in the section deletion starting point window. • Select the start and end points of the section you want to delete using the playback related buttons. • Playback related buttons : (PLAY ( ), PAUSE ( ), SEARCH ( )). 5. Press the OK button at the end point. The image and end point time is displayed in the Section deletion ending point window. HDD JAN/01/2008 17:30 PR1 Title List No.
editing NAVIGATION MENU Time Navigation SXC (VR mode) Using this function, you can search scene minute-by-minute from the recorded title list. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. HDD JAN/01/2008 17:30 PR1 Title List 1/3 No. 2. Press the ▲▼ buttons to select an entry you want to play from Title List, then press the YELLOW(C) button.
SELECT CONTENTS SXCVKL 1. Press the BLUE(D) button to select Contents. 2. Press the ▲▼ buttons to select the contents you want to move, then Press the OK or ► button. M This function is possible only when the disc contains the selected contents. HDD JAN/01/2008 17:30 PR1 Title List 1/3 No.
editing Playing Entries in the Playlist SXC (VR mode) Follow these instructions to play the playlist entries. N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. 2. Press the ▲▼ buttons to select the playlist you want to play, then press the OK or PLAY ( ) button. 3. Press the STOP ( ) button to stop playing. The screen returns to the Playlist screen. HDD JAN/02/2008 13:47 Playlist 1/3 No.
Editing a Scene for the Playlist SXC (VR mode) Follow these instructions to edit scenes for a playlist. N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. 3. Press the ▲▼ buttons to select Edit Playlist, then press the OK or ► button. The Edit Playlist screen is displayed. Playlist 1/3 No.
editing Moving a Scene (Changing the Position of a Scene) To setup, follow steps 1 to 3 on page 89. 4-1. Press the ▲▼◄► buttons to select the scene you want to move (change the position), then press the GREEN(B) button. • A yellow selection window is displayed on the scene to be moved. 5. Press the ▲▼◄► buttons to select the position to which you want to move the selected scene, then select the OK button. M HDD JAN/02/2008 13:47 Edit Playlist Scene No.
Deleting a Playlist Entry from the Playlist N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. HDD JAN/02/2008 13:47 No. 2. Press the ▲▼ buttons to select an entry you want to delete in the Playlist, then press the MARKER button until a checkmark appears. Repeat this step to select an additional title you want to delete.
editing COPYING FROM HDD TO DVD OR VICE-VERSA About the Copy Screen 1 HDD Selected Items: Copy 2 3 Available : 4099MB Source : HDD To : DVD 4 DVD 001 JAN/01/2008 1 002 JAN/01/2008 1 3 MPEG2 003 JAN/01/2008 1 0 SP 8 47MB Start Copy Sort Selection a CHECK 5 6 1 Total size and number of selected titles for copying 2 Title to be copied 3 This shows available disc space 4 The location where the copied files are stored 5 Copy start button 6 Sort button (Date, Name, Length, Channel In
7. Press the RED(A) button to select Start Copy. • The title to be copied is not displayed on the screen, and copying begins while the currently broadcasting programme is displayed on the screen. • Press the INFO button to view the copy processing bar. If you press INFO button again, copy processing bar will disappear. • To cancel the copying in progress, press the RED(A) button. x 21% b Bar Type Cancel c Channel 8. After a successful copy, “The title is successfully copied” message is displayed.
editing 6. Press the ▲▼ buttons to select the MP3, Photo or DivX file you want to copy, then press the MARKER button until a checkmark appears. • If you don’t want to copy a certain one of the checked entries, simply select that entry and press the MARKER button to deselect it until the checkmark disappears. 7. Press the ►▲▼ buttons to select the target media,then press the OK button. • You can create a new folder by pressing the GREEN(B) button. 8. Press the RED(A) button to select Start Copy.
M Pressing the EXIT ( CD Selected Items: 76.8MB (2) Source : DVD Copying... Copy Available : 236715MB To : Y :ROOT Free space 236615 MB Number of E file MP3 : 1 /(1)24 File Name :E 01.MP3 ###(2)## 1.mp3 9 MP3 8 36.6MB Start Copy t ROOT E MP3 (3) 33% New Folder eEXIT EDITING ) button during folder copying will cancel the folder copying after the current file is copied. You can copy up to 500 files or 500 sub folders to one folder.
editing DISC MANAGER Editing the Disc Name XCVKL Follow these instructions to give a name to a disc. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. 3. Press the ◄► buttons to select Rename, then press the OK button. The Rename screen is displayed. 4. Select the desired characters using the ▲▼◄► buttons, then press the OK button. 5. Press the BLUE(D) button to select Save. A disc name is given to the disc.
Delete All Title Lists XCVKL 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. Disc Manager Disc Name DVD-VR Used Space 00:17 ( 0.52 GB) Available Space 01:54 SP ( 3.85 GB) Disc Protection Info Not Protected Current Rec. Mode VR-Mode Rename
editing Formatting a Disc SXCK Use these instructions to format a disc. The disc protect should also be cleared. 1. With the unit in Stop mode, press the MENU button. HDD 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. Disc Manager Used Space 000:39 ( 1.68 GB) Available Space 065:19 XP ( 231.01 GB) 3. Press the ◄► buttons to select Format, then press the OK button.
M Once a disc is finalised, you cannot delete entries from the record list. After being finalised, the DVD±R/-RW(video mode) operates in the same manner as a DVD-Video. Depending on the disc type, the displayed screen may be different. Finalising time may be different depending on the amount of data recorded on the disc. Data on the disc will be damaged if the recorder is powered off during finalisation process. You can finalise the disc automatically using EZ Record.
reference TROUBLESHOOTING If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service centre. PROBLEM EXPLANATION/SOLUTION The input is displayed for a while when the power is turned on. The HDD & DVD RECORDER requires some time to initialize and the input will be displayed for approx. 10 seconds after it is turned on. Cannot record TV programmes. • Check whether the power cord is securely plugged into the power outlet.
EXPLANATION/SOLUTION No audio output. Check whether you have selected the correct digital output options in the Audio Output Options menu. (See pages 40~41) Timer lamp flickers • Check there is enough space in the disc or HDD for recording. • Check whether the current disc is recordable or not. Make sure to check before the start time of recording. Timer recording does not work properly. • Re-check the recording time and the end time settings again.
appendix SPECIFICATIONS General Input Power requirements AC 220~240 V, 50 Hz Power consumption 30 Watts / 2.2 Watts (Power off ) Weight 3.8 Kg Dimensions 430 mm(W) x 300 mm(D) x 55 mm(H) Operating temp. +5 °C to +35 °C Other conditions Keep level when operating. Less than 75% operating humidity Video Composite Video : 1.0 V p-p at 75ȍ load, sync negative Audio Max.
UNITED KINGDOM This Samsung product is warranted for the period of twelve (12)months from the original date of purchase,against defective materials and workmanship.In the event that warranty service is required,you should return the product to the retailer from whom it was purchased. However,Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
DVD-HR773 DVD-HR775 DVD-HR777 DVD Manuel d’utilisation imaginez les possibilités Merci d’avoir choisi cet appareil Samsung. Pour recevoir une assistance plus complète, veuillez enregistrer votre produit sur www.samsung.
premiers pas AVERTISSEMENT POUR REDUIRE LES RISQUES D’ELECTROCUTION, NE RETIREZ PAS LE COUVERCLE (NI LE PANNEAU ARRIERE). AUCUNE PIECE SITUEE A L’INTERIEUR NE PEUT ETRE REPAREE PAR L’UTILISATEUR. POUR TOUTE REVISION, S’ADRESSER A UN TECHNICIEN SPECIALISE. ATTENTION RISQUE D’ELECTROCUTION NE PAS OUVRIR Ce symbole indique une “tension électrique dangereuse” à l’intérieur de l’appareil susceptible de provoquer une décharge électrique ou un dommage corporel.
PRÉCAUTIONS Consignes de sécurité importantes Lisez attentivement ces instructions d’utilisation avant d’utiliser l’appareil. Conformez-vous à toutes les consignes de sécurité listées ci-dessous. Conservez ces instructions d’utilisation en vue d’une consultation ultérieure. Lisez les instructions. 2) Conservez les instructions. 3) Tenez compte de tous les avertissements. 4) Suivez toutes les instructions. 5) N’utilisez jamais cet appareil à proximité de l’eau.
premiers pas Entretien du châssis Pour des raisons de sécurité, assurez-vous de débrancher le cordon d’alimentation CA de la prise CA. • N’utilisez pas de benzène, de diluant ou d’autres solvants pour le nettoyage. • Nettoyez le châssis avec un chiffon doux. HDD (disque dur) Le disque dur dispose d’une grande capacité de stockage qui permet un enregistrement de longue durée et un accès rapide aux données écrites.
• Rangez-les verticalement. • Gardez-les dans une chemise de protection propre. • Si vous déplacez rapidement votre GRAVEUR DE DVD AVEC DISQUE DUR d’un endroit froid à un endroit chaud, les parties en fonctionnement et les lentilles peuvent générer de la condensation et entraîner une lecture anormale du disque. Dans pareil cas, attendez deux heures avant de brancher l’appareil. Insérez ensuite le disque et essayez à nouveau de le lire.
premiers pas • Dans les deux modes, la lecture est possible avant et après finalisation mais il n’est plus possible d’enregistrer, d’effacer et de modifier après finalisation. • Si vous souhaitez enregistrer le disque en mode VR, puis enregistrer en mode V, assurez-vous d’exécuter le Format. Soyez attentif à l’exécution du Format car vous risquez de perdre l’ensemble des données enregistrées. • Un disque DVD-RW vierge est initialisé en mode VR lors de sa première initialisation.
PROTECTION CONTRE LA COPIE • De nombreux DVD sont protégés contre la copie. C’est pourquoi vous devez raccorder directement votre GRAVEUR DE DVD AVEC DISQUE DUR à votre téléviseur et non à un magnétoscope. Le branchement à un magnétoscope entraîne une déformation de l’image lorsque vous tentez de lire des DVD protégés contre la copie.
premiers pas N’utilisez pas les disques suivants ! • Les disques LD, CD-G, CD-I, CD-ROM, DVD-ROM ne doivent pas être utilisés avec cet appareil. [Remarque] Types de disque qui ne peuvent pas être lus : CD/ CD-R/-RW/MP3/JPEG/DVD-Video/DVD-RAM/±RW/±R. La lecture d’un disque DVD-RW/-R enregistré en Mode Vidéo sur un autre composant n’est possible qu’une fois celui-ci finalisé. • Cet appareil risque de ne pas lire certains disques commerciaux ou certains disques DVD achetés hors zone.
• TPL (Target Peripheral List ) Ne s'agissant pas d'un système Windows XP mais d'un système hôte USB intégré, les périphériques USB pris en charge par ce produit sont inévitablement limités. La fonction hôte USB et la compatibilité de ce produit ont été démontrées sur les éléments suivants (outre ces éléments, il est probable qu'un grand nombre d'autres périphériques USB soit compatible avec ce produit).
contenu PREMIERS PAS 2 2 3 12 13 14 16 18 21 RACCORDEMENT & CONFIGURATION 22 22 23 24 33 Raccordement du GRAVEUR DE DVD AVEC DISQUE DUR Raccordements supplémentaires Antenne + GRAVEUR DE DVD AVEC DISQUE DUR + Décodeur externe + Téléviseur Autre type de raccordement du câble de sortie Vidéo Autre type de raccordement du câble de sortie Audio Raccordement d’un câble HDMI/DVI à un téléviseur Raccordement à la prise d’entrée DV, AV 3 IN Branchement aux périphériques USB 34 34 36 36 38 38 40 41 44 45 N
ENREGISTREMENT 66 73 74 75 78 79 79 MODIFICATION 81 81 85 86 87 87 92 93 95 96 FICHE TECHNIQUE Disques enregistrables Formats d’enregistrement Mode d’enregistremente Images non enregistrables Enregistrement immédiat Copie à partir d’un caméscope Réalisation d’un enregistrement immédiat (OTR) Enregistrement et lecture simultanés Fonction de programmation en tant que signal direct Réalisation d’un enregistrement programmé Utilisation de la fonction ShowView ShowView Allongé Accès à la liste d’enregistr
premiers pas FONCTIONS GÉNÉRALES Cet appareil vous permet d’enregistrer et de lire des vidéos numériques de haute qualité sur des disques DVDRAM/±RW/±R ou sur le disque dur. Vous pouvez également modifier des images numériques sur des disques DVD-RAM/±RW/ ou sur le disque dur. Enregistrement sur le disque dur • DVD-HR773 Vous pouvez effectuer un enregistrement vidéo d’une durée maximale d’environ 264 heures (8 heures en mode EP) sur le disque dur interne de 160 Go (gigaoctet).
AVANT DE LIRE LE MANUEL D’UTILISATION Prenez connaissance des points suivants avant de procéder à la lecture du manuel d’utilisation. Le tableau ci-dessous répertorie les icônes que vous rencontrerez dans le manuel Icône Définition HDD Désigne une fonction disponible sur le disque dur. DVD Indique une fonction disponible sur les DVD ou DVD±R/-RW(V) enregistrés et finalisés. RAM Désigne une fonction disponible sur un DVD-RAM. -RW Désigne une fonction disponible sur DVD-RW.
premiers pas UTILISATION DU GRAVEUR DE DVD AVEC DISQUE DUR Etape 1: Sélectionner le type de disque ou le disque dur Veuillez vérifier le type de disque disponible avant de démarrer l’enregistrement. Si vous souhaitez enregistrer de manière répétée sur le même disque ou modifier le disque après l’enregistrement, sélectionnez un disque réinscriptible du type DVD±RW ou DVD-RAM. Si vous souhaitez sauvegarder un enregistrement sans faire de modifications, optez pour un disque non réinscriptible DVD±R.
Etape 3 : Enregistrement Il existe deux méthodes d’enregistrement : l’enregistrement direct et l’enregistrement programmé. L’enregistrement programmé comprend quatre modes. Mode d’enregistrement : XP (mode Haute qualité), SP (mode Qualité standard), LP (mode Enregistrement long) et EP (mode Etendu) en fonction du mode d’enregistrement. Lorsque l’enregistrement est en mode FR, la meilleure qualité d’image est enregistrée en fonction du temps restant sur le disque.
premiers pas DÉBALLAGE Accessoires Assurez-vous que tous les accessoires ci-dessous se trouvent bien dans l’emballage. USB PAUSE REPEAT Câble vidéo/audio Câble RF pour le téléviseur Télécommande Piles pour la télécommande (type AAA) Manuel d’instructions Guide de configuration rapide Préparation de la télécommande Insertion des piles dans la télécommande • Retirez le couvercle du compartiment réservé aux piles situé à l’arrière de la télécommande. • Placez-y deux piles AAA.
Codes des téléviseurs pouvant être entrés à distance MARQUE BOUTON SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09 MARQUE NOBLEX NOKIA BOUTON 66 AIWA 82 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 NORDMENDE 72, 73, 75 BANG & OLUFSEN 57 PANASONIC 53, 54, 74, 75 BLAUPUNKT 71 PHILIPS 06, 55, 56, 57 BRANDT 73 PHONOLA 06, 56, 57 BRIONVEGA 57 PIONEER 58, 59, 73, 74 52 RADIOLA 75 RADIOMARELLI 06, 56 57 DAEWOO 19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 RCA 45, 46 EMERSON 64
premiers pas DESCRIPTION Façade 1 2 8 12 11 10 3 7 6 9 BOUTON OPEN/CLOSE Permet d'ouvrir et de fermer le tiroir disque. AFFICHAGE Affiche l’état de la lecture, l’heure, etc. BOUTON PLAY/PAUSE Permet de lire un disque ou de mettre en pause la lecture. BOUTON RECHERCHE/ SAUT 5 4 Pour aller aux titre/chapitre/piste suivants ou revenir aux titre/chapitre/piste précédents. (Mode Playback (Lecture)) Permet de sélectionner les chaînes préréglées de votre téléviseur.
Panneau arrière 1 3 2 4 5 6 7 8 9 10 1 Entrée en provenance de la prise d’antenne Permet de connecter le câble RF de l’antenne. 2 Sortie vers le connecteur du téléviseur Permet de connecter un câble RF à l’entrée de l’antenne du téléviseur. 3 Connecteur ENTREE PERITEL AV2 (EXT) Permet de connecter un appareil muni d’une sortie Péritel. 4 Connecteur SORTIE PERITEL AV1 (TV) Permet de connecter un appareil muni d’une entrée Péritel.
premiers pas Affichage en façade 10 Témoins associés à la lecture et à l’ouverture et la fermeture S’allume lorsque le bouton associé à la lecture et le bouton d’ouverture/de fermeture sont sélectionnés. Boutons du mode Disque Affiche l’état. Témoin AFFICHAGE DVD S’allume lorsque le mode DVD est sélectionné. Témoin AFFICHAGE DISQUE DUR S’allume lorsque le mode HDD (DISQUE DUR) est sélectionné. Témoin AFFICHAGE USB S’allume lorsque le mode USB (USB) est sélectionné.
APERÇU DE LA TÉLÉCOMMANDE La télécommande de votre ENREGISTREUR DE DVD AVEC DISQUE DUR fonctionne avec les téléviseurs Samsung et les marques compatibles. Insertion des piles dans la télécommande 2. Installez deux piles AAA. Veillez à installer les piles en respectant le sens de polarité (+/–) indiqué dans le compartiment. Bouton TV USB Appuyez pour faire fonctionner le téléviseur. 3. Remettez le capot en place. La durée de vie des piles est d'environ un an si le téléviseur est utilisé normalement.
raccordement & configuration RACCORDEMENT DU GRAVEUR DE DVD AVEC DISQUE DUR Cette partie traite des différentes méthodes de raccordement du GRAVEUR DE DVD AVEC DISQUE DUR aux autres composants externes et des modes de réglage initial requis. Vous pouvez connecter votre GRAVEUR DE DVD AVEC DISQUE DUR au téléviseur à l’aide du câble Péritel si l’entrée appropriée est disponible sur le téléviseur. 1. Connectez le câble RF comme indiqué. 2.
RACCORDEMENTS SUPPLÉMENTAIRES Vous pouvez connecter votre GRAVEUR DE DVD AVEC DISQUE DUR à un satellite ou à un syntoniseur numérique. RACCORDEMENT & CONFIGURATION appareil externe (récepteur satellite/magnétoscope) - Mode DVD 1. Reliez le connecteur AV2 du GRAVEUR DE DVD AVEC DISQUE DUR et le récepteur satellite/ magnétoscope ou le syntoniseur numérique à l’aide d’un câble Péritel. 2. Reliez le connecteur AV1 au connecteur Péritel AV du téléviseur. 3.
raccordement & configuration ANTENNE + GRAVEUR DE DVD AVEC DISQUE DUR + DÉCODEUR EXTERNE + TÉLÉVISEUR Si vous connectez un Décodeur externe au GRAVEUR DE DVD AVEC DISQUE DUR, vous pouvez enregistrer les chaînes cryptés (CANAL+ ou Première) reçues via le syntoniseur TV intégré sur le graveur. Mur 3 DECODEUR 1. Connectez les câbles d’antenne RF comme indiqué. 2. Reliez le connecteur AV1 du graveur au connecteur Péritel AV du téléviseur à l’aide d’un câble Péritel. 3.
AUTRE TYPE DE RACCORDEMENT DU CÂBLE DE SORTIE VIDÉO Il existe plusieurs façons de transmettre le signal vidéo sans utiliser de câbles Péritel. Sélectionnez ci-dessous le raccordement vidéo qui vous convient le mieux. • Cas 1 : Raccordement à une prise de sortie Vidéo (composite) • Cas 2 : Prises de sortie Vidéo composant Cas 1 : Raccordement à une prise de sortie Vidéo (composite) 1.
raccordement & configuration Cas 2 : Prises de sortie Vidéo composant 1. Connectez les câbles vidéo composant (non fournis) entre les prises COMPONENT OUT (Y, PB, PR) sur le GRAVEUR DE DVD AVEC DISQUE DUR et les prises COMPONENT IN (Y, PB, PR) sur votre téléviseur. • Profitez d’images de haute qualité dotées d’un rendu des couleurs parfait. 2.
AUTRE TYPE DE RACCORDEMENT DU CÂBLE DE SORTIE AUDIO Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. Fabriqué sous licence de Dolby Laboratories. “Dolby” et le symbole du double D sont des marques déposées des laboratoires Dolby.
raccordement & configuration Cas 2 : Raccordement à un amplificateur stéréo avec prises de sortie AV Si votre amplificateur stéréo possède uniquement des prises d’entrée AUDIO INPUT (L et R), utilisez les prises de sortie AUDIO OUT.
Cas 3 : Raccordement à un amplificateur AV avec prise de sortie numérique ou Arrière droit(R) Arrière gauche(L) Avant(L) Avant(R) Caisson de basses Centrale Français _29 RACCORDEMENT & CONFIGURATION Si votre amplificateur AV est équipé d’un Décodeur numérique Dolby Digital, MPEG2 ou DTS et d’une prise d’entrée numérique, utilisez ce raccordement. Pour profiter du son Dolby Digital, MPEG2 ou DTS, vous devrez configurer les paramètres audio.
raccordement & configuration RACCORDEMENT D’UN CÂBLE HDMI/DVI À UN TÉLÉVISEUR Si votre téléviseur possède une entrée HDMI/DVI, raccordez-lui un câble HDMI/DVI. Vous apprécierez la très grande qualité d’image et de son.
J Pour utiliser le câble HDMI (non fournis), branchez celui-ci avant le câble d’alimentation ou une fois la procédure de M Blanc « Configuration Plug & Play » effectuée. Ne branchez pas le câble HDMI lorsque la procédure « Configuration Plug & Play » est en cours. Le balayage progressif s’active automatiquement lorsque le câble HDMI est branché.
raccordement & configuration RACCORDEMENT À LA PRISE D’ENTRÉE DV, AV 3 IN Cette fonction vous permet de raccorder votre GRAVEUR DE DVD AVEC DISQUE DUR à d’autres périphériques et de visualiser ou d’enregistrer leur sortie.
Cas 2 : Connexion d’un lecteur DV à la prise d’entrée DV IN Si votre caméscope numérique possède une prise de sortie DV, connectez-la à la prise d’entrée DV de votre GRAVEUR DE DVD AVEC DISQUE DUR. M Si l’entrée n’est pas sélectionnée automatiquement, utilisez le bouton INPUT SEL. pour sélectionner l’entrée appropriée. BRANCHEMENT AUX PÉRIPHÉRIQUES USB Ces instructions vous permettent de brancher votre ENREGISTREUR DE DVD AVEC DISQUE DUR sur les périphériques USB.
configuration du système NAVIGATION DANS LES MENUS À L’ÉCRAN Les menus à l’écran vous permettent d’activer ou de désactiver différentes fonctions de votre GRAVEUR DE DVD AVEC DISQUE DUR. Appuyez sur le bouton MENU pour ouvrir le menu à l’écran, puis utilisez les boutons suivants pour naviguer dans les menus à l’écran. 1. Boutons ▲▼, ◄► Appuyez sur ces boutons de la télécommande afin de déplacer la barre de sélection ▲▼, ◄► pour naviguer entre les options du menu. 2.
6. Le balayage automatique des chaînes est lancé. • Le nombre de chaînes enregistrées automatiquement par le GRAVEUR DE DVD AVEC DISQUE DUR dépend du nombre de canaux trouvés. Balayage automatique de canal terminé avec succès. Appuyez sur la touche [OK] pour le paramétrage automatique de l’horloge. 7. Lorsque le balayage automatique des chaînes est terminé, le réglage automatique de l’horloge est démarré dans les 10 secondes.
configuration du système RÉGLAGE DE L’HORLOGE Ce menu est utilisé pour régler l’heure exacte. Vous devez régler l’heure pour utiliser l’enregistrement programmé. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. 2. Appuyez sur les boutons ▲▼ pour sélectionner Paramétrer, puis appuyez sur le bouton OK ou ►. 3. Appuyez sur les boutons ▲▼ pour sélectionner Système, puis appuyez sur le bouton OK ou ►. DD & DVD RECORDER DD Bibliothèque Enr. par min.
4. Appuyez sur les boutons ▲▼ pour sélectionner Installation Auto, puis appuyez sur le bouton OK ou ►. Le message “Vos données seront perdues. [OK] : POURSUIVRE ou [RETURN] : QUITTER.” s’affiche. 5. Appuyez sur le bouton OK, puis sur les boutons ▲▼◄► pour sélectionner votre pays. • Le GRAVEUR DE DVD AVEC DISQUE DUR recherche les chaînes selon une liste de préférences préréglées correspondant au pays que vous avez sélectionné.
configuration du système CONFIGURATION DES OPTIONS DE LANGUE Si vous configurez les options de langue à l’avance, elles s’afficheront automatiquement chaque fois que vous visionnerez un film. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. DD & DVD RECORDER DD Bibliothèque 2. Appuyez sur les boutons ▲▼ pour sélectionner Paramétrer, puis appuyez sur le bouton OK ou ►. Enr. par min. Gestionnaire de Disque 3. Appuyez sur les boutons ▲▼ pour sélectionner Langue, puis appuyez sur le bouton OK ou ►.
Anynet+ (HDMI CEC) Anynet+ est une fonction qui permet de faire fonctionner l’enregistreur à l’aide d’une télécommande pour téléviseur Samsung en reliant l’ENREGISTREUR DE DVD AVEC DISQUE DUR à un téléviseur Samsung à l’aide d’un câble HDMI (reportez-vous aux pages 30 à 31) (uniquement disponible avec les téléviseurs Samsung prenant en charge Anynet+) Système | Paramétrer horloge Bibliothèque Enr. par min. Gestionnaire de Disque Extinct.
configuration du système CONFIGURATION DES OPTIONS AUDIO Vous pouvez brancher votre GRAVEUR DE DVD AVEC DISQUE DUR sur un amplificateur externe ou un ensemble Home cinéma. Cela vous permet de configurer le dispositif audio et l’état du son en fonction du système audio en cours d’utilisation. Vous pouvez également régler le mode NICAM. DD & DVD RECORDER DD 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. 2. Appuyez sur les boutons ▲▼ pour sélectionner Paramétrer, puis appuyez sur le bouton OK ou ƃ. 3.
DRC DD & DVD RECORDER DD Bibliothèque Enr. par min. Gestionnaire de Disque Audio Sortie numérique : PCM | DTS : Arrêt | DRC : Marche Arrêt Marche : Marche NICAM | | Paramétrer mDÉPLA. sSELECT. rREVENIR eSORTIE NICAM Les programmes NICAM sont divisés en 3 types. NICAM Stéréo, NICAM Mono et Bilingue (transmission dans une autre langue). Les programmes NICAM sont toujours accompagnés d’un son mono standard et vous pouvez sélectionner le son désiré en réglant NICAM Marche ou Arrêt.
configuration du système Réduction bruit 3D (réduction du bruit adaptable au déplacement) • Arrêt : Normal • Marche : Procure une image plus nette grâce à la réduction du bruit (pour l’enregistrement). DD & DVD RECORDER DD Bibliothèque Enr. par min. Gestionnaire de Disque Paramétrer mDÉPLA. Vidéo Format écran : 4:3 Letter Box | Réduction bruit 3D Arrêt : Arrêt | Marche : 576p | Résolution HDMI Sortie Vidéo : Composant | Sortie component : Progressif | sSELECT.
Sortie Vidéo DD & DVD RECORDER DD Bibliothèque Enr. par min. Gestionnaire de Disque Paramétrer mDÉPLA. Vidéo Format écran : 4:3 Letter Box | Réduction bruit 3D : Arrêt | Résolution HDMI : 576p | Sortie Vidéo : Composant Composant Sortie component RVB : Progressif sSELECT. rREVENIR | eSORTIE En mode composant, vous pouvez régler la sortie vidéo sur balayage progressif ou Balayage entrelacé.
configuration du système CONFIGURATION DU VERROUILLAGE PARENTAL Z La fonction verrouillage parental peut être utilisée avec des DVD ayant reçu un niveau de censure, ce qui permet de contrôler le type de DVD qui peuvent être regardés en famille. Un disque comporte 8 niveaux d’évaluation. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. 2. Appuyez sur les boutons ▲▼ pour sélectionner Paramétrer, puis appuyez sur le bouton OK ou ƃ. 3.
CONFIGURATION DES OPTIONS D’ENREGISTREMENT Création automatique des chapitres CVKL (Mode V) Un DVD vidéo est divisé en « Titles » et en « Chapters ». Lorsque vous enregistrez un programme, un titre est alorscréé. Si vous utilisez cette fonction, le titre se divise en chapitres. 2. Appuyez sur les boutons ▲▼ pour sélectionner enregistrement, puis appuyez sur le bouton OK ou ►. DD & DVD RECORDER DVD-RW(V) Bibliothèque Enr. par min.
configuration du système Enregistrement EZ CVKL (Mode V) Cette fonction vous permet d’initialiser et de finaliser automatiquement un disque. DD & DVD RECORDER DD Bibliothèque 1. Appuyez sur les boutons ▲▼ pour sélectionner Enregistrement EZ, puis appuyez sur le bouton OK ou ƃ. 2. Appuyez sur les boutons ▲▼ pour sélectionner Marche, puis sur le bouton OK ou ƃ. Appuyez sur le bouton EXIT ( ) pour sortir du menu. Enr. par min.
lecture Cette section présente le fonctionnement de base de la lecture et de la lecture par type de disque. Veuillez lire les informations suivantes avant de lire un disque. CODE RÉGIONAL (DVD VIDÉO UNIQUEMENT) 2 ALL LOGOS DES DISQUES COMPATIBLES STEREO CREATOR Dolby Digital Stéréo DTS Système de diffusion adopté au Royaume Uni, France, Allemagne, etc.
lecture Types de disque Contenu du logo du disque Contenu enregistré Forme du disque Durée de lecture maximale ou minute 1 (XP: Excellente qualité) DVD-RAM Monoface (12cm) 2 (SP: Qualité standard) (4,7Go) 4 (LP: Lecture longue) AUDIO 6 ou 8 (EP: Etendu) VIDEO 2 (XP: Excellente qualité) Double face (12cm) 4 (SP: Qualité standard) (9,4Go) 8 (LP: Lecture longue) 12 ou 16 (EP: Etendu) 1 (XP: Excellente qualité) DVD-RW AUDIO VIDEO 12cm (4,7Go) 2 (SP: Qualité standard) 4 (LP: Lecture longue) 6
Disques qui ne peuvent pas être lus • • • • • • DVD Vidéo comportant un code régional autre que “2” ou “ALL” DVD-R d’auteur 3,9 Go DVD-RAM/-RW (mode VR) enregistré sans tenir compte des normes d’enregistrement vidéo Un DVD±R/DVD-RW(V) enregistré et non finalisé sur un enregistreur d’une marque différente. DVD-ROM/PD/Disque MV, etc CVD/CD-ROM/CDV/CD-G/CD-I Le GRAVEUR DE DVD AVEC DISQUE DUR ne peut lire que les disques compatibles avec DVD-RAM Standard Version 2.0.
lecture UTILISATION DU MENU DU DISQUE & DU MENU DES TITRES Certains disques comportent un système de menus permettant de sélectionner des fonctions spéciales comme titre, chapitre, bande son, bande annonce, informations sur les acteurs, etc. Pour un DVD-VIDEO • Menu du Disque : Appuyez sur le bouton DISC MENU pour accéder au menu disque. • Accédez au menu de configuration de la lecture. • Vous pouvez sélectionner la langue audio et la langue de sous-titrage disponibles sur le disque.
Saut de chapitres, de titres ou de repères SZXCVBKL Lecture lente SZXCVKLD En mode Pause, appuyez sur les boutons RECHERCHE ( ) de la télécommande. • Si vous appuyez sur le bouton RECHERCHE ( ) : 1/2 1/4 1/8 • Si vous appuyez sur le bouton RECHERCHE ( ) : 1/2 1/4 1/8 • Pour repasser en lecture à vitesse normale, appuyez sur le bouton PLAY ( ). La lecture du disque se fait à vitesse lente (1/4) lorsque vous appuyez longuement sur les boutons RECHERCHE ( ) en mode pause.
lecture UTILISATION DU BOUTON INFO La fonction INFO permet de rechercher rapidement une scène en accédant au titre, au chapitre, à la piste ou à l’heure. Elle permet également de modifier les sous-titres et les paramètres audio et de régler certaines fonctions comme la fonction Angle, Zoom, Répétition. Passage direct à une scène grâce à la fonction INFO SZXCVKLD Utilisez cette fonction pour accéder à un titre, un chapitre ou une heure spécifique. 1. Appuyez sur le bouton INFO au cours de la lecture. 2.
SÉLECTION DES CANAUX DE PISTE SON & AUDIO SZXCKLD Sélectionne l’une des pistes son enregistrées sur le disque. Sélectionne également les canaux audio. Vous pouvez également activer cette fonction en appuyant sur le bouton AUDIO de la télécommande. 1. Appuyez sur le bouton INFO au cours de la lecture. 2. Appuyez sur les boutons ▲▼ pour sélectionner Audio. M LECTURE 3. Appuyez sur les boutons Ƃƃ pour sélectionner les bandes son ou le canal audio de votre choix.
lecture Répétition A-B SZXCVKL 1. Appuyez sur le bouton INFO au cours de lalecture. 2. Appuyez sur les boutons ▲▼ pour sélectionner Répétition. Répétition A-B > 3. Appuyez sur les boutons Ƃƃ pour sélectionner A-B, puis sur le bouton OK. 4. Appuyez sur le bouton OK à l’instant (A) où vous souhaitez faire démarrer la lecture répétée et appuyez à nouveau à l’instant (B) où vous souhaitez arrêter la lecture répétée. La lecture de la section A-B démarre. M >CHANG. sSELECT.
UTILISATION DES MARQUEURS SXC (Mode VR) Posez des repères aux scènes que vous désirez revoir afin de commencer la lecture à partir de la position repérée. Réglage de repères 1. Appuyez sur le bouton MARKER au cours de la lecture. Marqueur 01 02 -- -- -- -- -- -- -- -- N:2 3. Appuyez sur les boutons ƃ pour passer à la position suivante. 4. Appuyez de nouveau sur le bouton OK lorsque la scène souhaitée apparaît.
lecture UTILISATION DES SIGNETS ZCVKL (Mode V) Réglage de signets 1. Appuyez sur le bouton MARKER au cours de la lecture. Signet 2. Appuyez sur le bouton OK lorsque la scène souhaitée apparaît. • Le numéro 1 s’affiche et la scène est mémorisée. 1 2 - - - - - - - -- 3. Appuyez sur les boutons ƃ pour passer à la position suivante. 4. ppuyez de nouveau sur le bouton OK lorsque la scène souhaitée apparaît. Le numéro 2 s’affiche et la scène est mémorisée.
LECTURE D’UN FICHIER CD/MP3 AUDIO Boutons de la télécommande servant à la lecture de CD audio (CD-DA)/MP3 2 3 2 5 1 Bouton SAUT ( ) : permet de passer à la page précédente ou la page suivante. 2 Boutons RECHERCHE ( ) : permet d’accélérer la lecture (X2, X4, X8) (CD audio uniquement) 3 Bouton STOP ( (chanson). 4 Bouton PAUSE ( 5 Bouton PLAY ( (chanson). 6 : permet de sélectionner une piste (chanson).
lecture Lecture d’un disque MP3 1. Insérez le disque MP3 dans le tiroir disque. • Le menu s’affiche 2. Appuyez sur les boutons ▲▼ pour sélectionner Bibliothèque, puis sur le bouton OK ou ƃ. 3. Appuyez sur les boutons ▲▼ pour sélectionner Musique, puis sur le bouton OK ou ƃ. 4. Appuyez sur les boutons ▲▼ pour sélectionner la piste que vous souhaitez lire, puis appuyez sur le bouton OK. MP3 Screen Elements ➀ CD Q Song 1.mp3 Liste musicale 1/9 No. Titre Taille Y ROOT ➁ ► ➂ ➃ 00:02:22 9 Song 1.
Import. CD o 1. Appuyez sur le bouton ROUGE (A) au cours de la lecture de la liste musicale. CD Q TRACK01 Liste musicale 1/10 No. 2. Appuyez sur les boutons ▲▼ pour sélectionner Import. CD, puis sur le bouton OK ou ►. Il. TRACK01 Nouv. lect. Liste de lecture Sélectionner tout 002 TRACK02 3:57 003 TRACK03 3:57 004 TRACK04 4:03 005 TRACK05 4:09 006 TRACK06 5:08 007 TRACK07 3:31 Édit Mode Lecture #/$ Précédent/Page suivante a Marqueur CD Eléments sélectionnés: 5.
lecture Liste de lecture oA 1. Appuyez sur le bouton ROUGE (A) au cours de la lecture de la Liste musicale. CD No. 2. Appuyez sur les boutons ▲▼ pour sélectionner Liste de lecture, puis appuyez sur le bouton OK ou ƃ. 3. Appuyez sur les boutons ▲▼ pour sélectionner le dossier de la liste de lecture souhaitée, puis appuyez sur le bouton OK. La lecture des pistes sélectionnées démarre automatiquement.
Aller dans liste de fichiers musicaux oA 1. Appuyez sur le bouton BLEU (D) au cours de la lecture de la Liste de lecture. La Liste de lecture s’affiche. CD Q TRACK04 Liste de lecture U 1/4 No. Titre Y PLAYLIST01 R Longueur TRACK04 4:03 002 TRACK02 3:57 ► 00:02:22 003 TRACK06 5:08 I TRACK04 k PLAYLIST01 004 TRACK01 4:19 Nouv. l. lect.
lecture LECTURE D’UNE IMAGE G 1. Insérez le disque JPEG dans le tiroir disque. • Le menu s’affiche 2. Appuyez sur les boutons ▲▼ pour sélectionner Bibliothèque, puis sur le bouton OK ou ƃ. 3. Appuyez sur les boutons ▲▼ pour sélectionner Photo, puis appuyez sur le bouton OK ou ƃ. • Appuyez sur le bouton SAUT ( ) pour visualiser les huit images suivantes. • Appuyez sur le bouton SAUT ( ) pour visualiser les huit images précédentes. CD Image 1.jpg Liste de photos 1/17 ROOT Image 1.jpg Image 10.
Zoom Pour la configuration, suivez les étapes 1 à 4 de la page 62. 5-1. Appuyez sur le bouton JAUNE (C) pour sélectionner Zoom. 6. Pour changer la taille de l’image, appuyez sur le bouton OK. L’agrandissement maximal est de quatre fois la taille normale (4x). ➞ X2 ➞ X4 ➞ X2 ➞ Normal LECTURE • Vous pouvez accéder à la Liste de photos en appuyant sur le bouton JAUNE (C). ❖ Pour arrêter le zoom Appuyez sur le bouton VERT (B), STOP ( ) ou RETURN.
lecture LECTURE D’UN DIVX N Utilisation du bouton MENU 1. Insérez un DivX dans le tiroir disque. • Le menu s’affiche CD Movie_01.avi Liste DivX 1/1 No. 2. Appuyez sur les boutons ▲▼ pour sélectionner Bibliothèque, puis sur le bouton OK ou ƃ. 3. Appuyez sur les boutons ▲▼ pour sélectionner DivX, puis sur le bouton OK ou ƃ. 4. Appuyez sur les boutons ▲▼ pour sélectionner le fichier avi (DivX), puis appuyez sur le bouton OK ou PLAY ( ). Titre Taille Y ROOT 001 Movie_01.avi 162.
Occid.
enregistrement Cette section présente diverses méthodes d’enregistrement sur disque dur et disque DVD. TCet appareil peut effectuer des enregistrements sur divers types de disques. Avant l’enregistrement, lisez les instructions suivantes et sélectionnez le type de disque en fonction de vos préférences. DISQUES ENREGISTRABLES Cet enregistreur est en mesure d’enregistrer sur les disques suivants. HDD DVD-RAM DVD-RW DVD-R DVD+RW DVD+R • Les DVD±RW et les DVD-RAM sont réinscriptibles.
M Finaliser - Cette fonction ferme le DVD-RW/±R et aucun enregistrement complémentaire ne peut être effectué. Ne pas finaliser - Cela permet un enregistrement complémentaire sur un disque DVD-RW enregistré à l’origine sur le GRAVEUR DE DVD AVEC DISQUE DUR. - Un disque DVD-RW déjà enregistré en DAO (Disc At Once) sur un PC ne peut pas être non finalisé. - Un disque DVD-RW qui a été déjà enregistré en mode Vidéo sur un enregistreur d’une autre marque ne peut pas être non finalisé.
enregistrement MODE D’ENREGISTREMENTE Sélectionnez l’un des quatre modes d’enregistrement en appuyant sur le bouton REC MODE à plusieurs reprises lorsque l’appareil est en mode Stop pour la durée d’enregistrement souhaitée et la qualité de l’image. Généralement, la qualité de l’image s’améliore lorsque la durée d’enregistrement diminue. En mode FR, le mode d’enregistrement le plus adapté est réglé automatiquement, en fonction du temps restant sur le disque et de la durée de l’enregistrement programmé.
• DVD-HR777 Recording Mode (Mode d’enregistrement) XP (mode Haute qualité) SP (mode Qualité standard) LP (mode Enregistrement long) FR (Enregistrement variable) M Env. 68 heures Env. 1 heure environ 8,5 Mbps Env. 135 heures Env. 2 heures environ 4,5 Mbps Env. 270 heures Env. 4 heures environ 2 Mbps Env. 405 heures Env. 6 heures/ environ 1,6 Mbps Env. 534 heures Env. 68 heures ~ 534 heures Env. 8 heures/ environ 1,2 Mbps Env.
enregistrement ENREGISTREMENT IMMÉDIAT SXCVKL Avant de commencer 1. Vérifiez que le disque dispose de suffisamment d’espace pour l’enregistrement. 2. Appuyez sur le bouton DD ou DVD. Si vous sélectionnez DVD, appuyez sur le bouton OPEN/CLOSE et placez Appuyez sur le bouton OPEN/ CLOSE pour fermer le tiroir disque. Attendez la disparition de LOAD sur l’affichage en façade. Enregistrement du programme de télévision en cours de visionnage 1.
Pour suspendre l’enregistrement • Appuyez sur le bouton REC PAUSE pour suspendre l’enregistrement en cours. • Appuyez sur le bouton REC PAUSE à nouveau pendant la pause pour reprendre l’enregistrement en cours. • Vous pouvez changer de chaîne en actionnant les boutons PROG ( ) lors des pauses d’enregistrement. • Si vous sélectionnez le mode DV (DV) en mode Rec pause (Pause enr.), l’enregistrement s’arrête. Si vous changez la source d’entrée lorsque vous êtes sur Rec pause (Pause enr.
enregistrement Pour arrêter l’enregistrement Appuyez sur le bouton STOP ( ) pour arrêter ou terminer l’enregistrement en cours. • Lors de l’utilisation de disques DVD-RAM/±RW/±R, le message “Mise à jour des informations du disque. Veuillez patienter un instant.” s’affiche. M Pour afficher à l’écran les icônes liées à la lecture, appuyez sur l’un des boutons directionnels de la télécommande.
ENREGISTREMENT ET LECTURE SIMULTANÉS S Vous pouvez lire à partir du début le programme en cours d’enregistrement. Vous pouvez consulter la liste précédente tout en enregistrant un programme. Utilisation du bouton PLAY ( ) 1. Appuyez sur le bouton PLAY ( ) pendant que l’appareil est en mode enregistrement. La lecture s’effectue à partir du début du titre en cours d’enregistrement. La lecture n’est disponible que 10 secondes après le début de l’enregistrement.
enregistrement FONCTION DE PROGRAMMATION EN TANT QUE SIGNAL DIRECT S Cette fonction permet de lire à nouveau les enregistrements comme un signal direct. Si vous êtes interrompu pendant que vous regardez un programme télévisé, appuyez simplement sur le bouton TIME SHIFT et l’ENREGISTREUR DE DVD AVEC DISQUE DUR démarre immédiatement l’enregistrement du programme en question. Time Shift >CHANG. Marche sSELECT. Utilisation de la fonction Programmation 1.
RÉALISATION D’UN ENREGISTREMENT PROGRAMMÉ SXCVKL 1. Vérifiez que le câble d’antenne est bien connecté. 2. Vérifiez qu’il reste suffisamment d’espace disponible sur le disque. 3. Vérifiez que la date et l’heure sont exactes. Assurez-vous que l’horloge est réglée (Paramétrer – Réglage de l’horloge) avant d’effectuer un enregistrement programmé. (Reportez-vous à la page 36) 1. Appuyez sur le bouton TIMER pendant que l’appareil est en mode Arrêt. 2.
enregistrement - Configurez l’heure de départ EXACTEMENT en fonction du programme télévisé publié. Sinon, l’enregistrement programmé ne fonctionnera pas. - Ne sélectionnez pas VPS ou PDC avant d’être certain que le programme que vous souhaitez enregistrer est émis par VPS ou PDC. • TITLE : Pour désigner le titre, appuyez à nouveau sur le bouton ROUGE (A). L’écran de changement du nom du titre apparaît. Suivez les étapes 4 à 5 de la rubrique « Changement du nom (étiquetage) d’un titre », pages 81~82. 5.
Ajout d’une liste programmée Suivez les consignes suivantes pour ajouter une entrée de la liste programmée. Pour la configuration, suivez les étapes 1 à 2 de la section « Réalisation d’un enregistrement programmé » en page 75. 4. Appuyez sur le bouton OK pour confirmer le réglage ajouté. 5. Appuyez sur le bouton EXIT ( ) pour terminer l’opération. L’écran Liste programmée disparaît.
enregistrement UTILISATION DE LA FONCTION SHOWVIEW SXCVKL Avant de programmer un enregistrement sur votre ENREGISTREUR DVD AVEC DISQUE DUR : • Allumez le téléviseur et l’ENREGISTREUR DE DVD AVEC DISQUE DUR. • Vérifiez que la date et l’heure sont exactes. Jusqu’à douze programmes peuvent être définis pour l’enregistrement. 1. Appuyez sur le bouton TIMER pendant que l’appareil est en mode Arrêt. DD & DVD RECORDER DD Bibliothèque 2.
SHOWVIEW ALLONGÉ Afin d’éviter les retards ou les dépassements, l’ENREGISTREUR DE DVD AVEC DISQUE DUR dispose de la fonction ShowView Allongé permettant d’allonger la durée d’enregistrement de 60 minutes. • Utilisez-la uniquement si la fonction PDC n’est pas disponible ou si elle est réglée sur ARRET. 1. Appuyez sur le bouton TIMER pendant que l’appareil est en mode Arrêt. DD & DVD RECORDER DD Bibliothèque 2. Appuyez sur les boutons ▲▼pour sélectionner ShowView Allongé, puis sur le bouton OK ou ƃ. Enr.
enregistrement Effacer la Liste enregistrée Efface toutes les Liste enregistrée en une fois. 3-1. Appuyez sur le bouton VERT (B). 4. Appuyez sur les boutons Ƃƃ pour sélectionner Oui, puis appuyez sur le bouton OK ou ƃ. DD Liste enregistrée No. Vers Source Date Démarrage Fin 01 DD PR 01 Jan 01 17:30 18:30 SP Marche OK 02 DD PR 01 Jan 01 21:00 22:00 SP Marche OK 03 DD Souhaitez-vous PR 01 Jan 01 supprimer 23:15 une 23:45 SP Marche OK liste enregistrée? Oui Supprimer mDÉPLA.
modification MODIFICATION DE BASE (LISTE DE TITRES) Lecture du titre SXCVKL Respectez les consignes suivantes pour lire une scène à partir de la liste de titres. N Utilisation du bouton TITLE LIST DD JAN/01/2008 17:30 PR1 1. Appuyez sur le bouton TITLE LIST, appareil en mode Stop ou Lecture. No. 2. A l’aide des boutons ▲▼, sélectionnez l’entrée que vous souhaitez renommer parmi la liste des titres, puis appuyez sur le bouton OK ou PLAY ( ). Le titre sélectionné est lu. 3.
modification 5. Appuyez sur le bouton BLEU (D) pour sélectionner Enreg. Le nom du titre changé s’affiche sur l’élément du titre de l’entrée sélectionnée. DD Renommer Sports(A1) Espace Libre mDÉPLA. Espace sSELECT. Effacer rREVENIR Enreg. eSORTIE Verrouillage (protection) d’un titre SXCVKL Suivez ces instructions pour verrouiller une entrée afin de la protéger contre toute modification accidentelle N Utilisation du bouton TITLE LIST 1. Appuyez sur le bouton TITLE LIST, appareil en mode Stop ou Lecture.
Suppression d’un titre SXCVKL Suivez ces instructions pour supprimer une entrée de la liste des titres. N Utilisation du bouton TITLE LIST 1. Appuyez sur le bouton TITLE LIST, appareil en mode Stop ou Lecture. Liste de Titres 2/3 No. Supprimer Copier 3 MPEG2 Protection 4l.Jan/02/2008 21:00 Nouv. lect. 1 SP Sélectionner tout Compatibillité Dessélect.
modification Partition d’une section d’un titre (partage) SK Suivez ces instructions pour séparer une section d’une entrée de liste de titres. N Utilisation du bouton TITLE LIST 1. Appuyez sur le bouton TITLE LIST, appareil en mode Stop ou Lecture. 2. Appuyez sur les boutons ▲▼ pour sélectionner une entrée que vous souhaitez séparer de la Liste de titres, puis appuyez sur le bouton ROUGE (A) Le menu Édit s’affiche. 3. Appuyez sur les boutons ▲▼ pour sélectionner Séparer, puis appuyez sur le bouton OK ou ƃ.
4. Appuyez sur le bouton OK au point de départ. L’image ainsi que l’heure du point de départ s’affichent dans la fenêtre du point de départ de la suppression de section. • Sélectionnez les points de départ et de fin de la section que vous souhaitez supprimer à l’aide des boutons liés à la lecture. • Boutons liés à la lecture : (PLAY ( ), PAUSE ( ), RECHERCHE ( )). 5. Appuyez sur le bouton OK au point de fin.
modification MENU NAVIGATION Navigation par Durée SXC (Mode VR) Cette fonction vous permet de rechercher une scène minute par minute dans la liste de titres enregistrée. N Utilisation du bouton TITLE LIST 1. Appuyez sur le bouton TITLE LIST, appareil en mode Stop ou Lecture. 2. Appuyez sur les boutons ▲▼ pour sélectionner une entrée à lire dans la Liste de titres, puis appuyez sur le bouton JAUNE (C). 3. Appuyez sur les boutons ▲▼ pour sélectionner Navigation par Durée, puis appuyez sur le bouton OK ou ƃ.
SÉLECTION DU CONTENU SXCVKL 1. Appuyez sur le bouton BLEU (D) pour sélectionner Contenu. 2. Appuyez sur les boutons ▲▼ pour sélectionner le contenu que vous souhaitez déplacer, puis appuyez sur le bouton OK ou ƃ. M Cette fonction n’est disponible que lorsque le disque contient le contenu sélectionné. DD JAN/01/2008 17:30 PR1 Liste de Titres 1/3 No.
modification Lecture des entrées dans la liste de lecture SXC (Mode VR) Suivez ces instructions pour lire les entrées de liste de lecture. N Utilisation du bouton PLAY LIST 1. Appuyez sur le bouton PLAY LIST, appareil en mode Stop ou Lecture. 2. Appuyez sur les boutons ▲▼ pour sélectionner la liste de lecture que vous souhaitez lire puis appuyez sur le bouton OK ou PLAY ( ). 3. Appuyez sur la bouton STOP ( ) pour arrêter la lecture. L’affichage revient à l’écran Liste de lecture.
Modification d’une scène pour la liste de lecture SXC (Mode VR) Suivez ces instructions pour modifier les scènes d’une liste de lecture. N Utilisation du bouton PLAY LIST 1. Appuyez sur le bouton PLAY LIST, appareil en mode Stop ou Lecture. 3. Appuyez sur les boutons ▲▼ pour sélectionner Edit. l. lect., puis appuyez sur le bouton OK ou ƃ. L’écran Editer la liste de lecture s’affiche. Liste de lecture 1/3 No. Supprimer Copier i LISTE DE LECTURE Renommer Edit.4 l. lect. Jan/02/2008 13:47 7l.6lect. Nouv.
modification Déplacement d’une scène (changement de la position d’une scène) Pour la configuration, suivez les étapes 1 à 3 de la page 89. 4-1. A l’aide des boutons ▲▼Ƃƃ, sélectionnez la scène que vous souhaitez déplacer (changer la position), puis appuyez sur le bouton VERT (B). • Une fenêtre de sélection jaune s’affiche sur la scène à déplacer. 5. Appuyez sur les boutons ▲▼Ƃƃ pour sélectionner la position à laquelle vous souhaitez déplacer la scène sélectionnée, puis appuyez sur le bouton OK.
Suppression d’une entrée dans la liste de lecture à partir de la liste de lecture N Utilisation du bouton PLAY LIST 1. Appuyez sur le bouton PLAY LIST, appareil en mode Stop ou Lecture. 3. Appuyez sur le bouton ROUGE (A) pour sélectionner Édit. Le menu Édit s’affiche. 4. Appuyez sur les boutons ▲▼ pour sélectionner Supprimer, puis appuyez sur le bouton OK ou ƃ. • Vous serez sollicité par le message de confirmation de suppression “Souhaitez-vous supprimer?”. 5.
modification EFFECTUER DES COPIES DU DISQUE DUR VERS UN DVD ET INVERSEMENT A propos de l’écran de copie 1 DD Eléments sélectionnés : Copier Disponible : 4099MB Source : DD 2 001 JAN/01/2008 1 4 DVD 002 JAN/01/2008 1 3 MPEG2 003 JAN/01/2008 1 0 SP 8 47MB Démarrer copie Trier Sélection a Marqueur 5 3 Vers : DVD 6 1 Taille totale et numéro des titres sélectionnés pour la copie 2 Titre à copier 3 Indique l’espace disponible sur le disque 4 L’emplacement où sont enregistrés les fichiers co
7. Appuyez sur le bouton ROUGE (A) pour sélectionner Démarrer copie. • Le titre à copier ne s’affiche pas à l’écran et la copie démarre alors que le programme en cours de diffusion est affiché à l’écran. • Appuyez sur le bouton INFO pour afficher la barre de traitement des copies. Si vous appuyez à nouveau sur le bouton INFO, la barre de traitement des copies disparaît. • Appuyez sur le bouton ROUGE (A) pour annuler la copie en cours. x 21% b Type de barre Annuler c Canal 8.
modification 6. A l’aide des boutons ▲▼, sélectionnez le fichier MP3, Photo ou DivX que vous souhaitez copier, puis appuyez sur le bouton MARKER jusqu’à ce que le fichier soit coché. • Si vous souhaitez ne pas copier l’une des entrées cochées, il vous suffit de sélectionner l’entrée en question et d’appuyer sur le bouton MARKER jusqu’à ce qu’elle ne soit plus cochée. 7. Appuyez sur les boutons ƃ▲▼ pour sélectionner le support cible; puis sur le bouton OK.
M Si vous appuyez sur le bouton EXIT ( ) durant la copie de dossiers, cette procédure sera annulée lorsque la copie du fichier en cours sera terminée. Vous pouvez procéder à la copie de 500 fichiers ou de 500 sous-dossiers dans un seul dossier. [MP3, JPEG, DivX] Si vous souhaitez copier des fichiers, vous devez créer un nouveau dossier avant de lancer la procédure de copie. Vous ne pouvez pas effectuer de copie dans le dossier racine sans créer de nouveau dossier. CD Eléments sélectionnés : 76.
modification GESTIONNAIRE DE DISQUE Modification du nom du disque XCVKL Procédez comme suit pour donner un nom à un disque. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. 2. Appuyez sur les boutons ▲▼ pour sélectionner Gestionnaire de Disque, puis appuyez sur le bouton OK ou ƃ. 3. Appuyez sur les boutons Ƃƃ pour sélectionner Renommer, puis appuyez sur le bouton OK. L’écran Renommer s’affiche. 4. Sélectionnez les caractères nécessaires à l’aide des boutons ▲▼Ƃƃ, puis appuyez sur le bouton OK. 5.
Suppression de toutes les listes de titres XCVKL 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. 2. Appuyez sur les boutons ▲▼ pour sélectionner Gestionnaire de Disque, puis appuyez sur le bouton OK ou ƃ. Gestionnairede Disque Nom du Disque DVD-VR Espace utilisé 00:17 ( 0.52 GB) Espace disponible 01:54 SP ( 3.85 GB) Info prot. Disque Arrêt Protégé Mode enr. Actuel Mode VR Renommer
modification Formatage d’un disque SXCK Use these instructions to format a disc. The disc protect should also be cleared. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. 2. Appuyez sur les boutons ▲▼ pour sélectionner Gestionnaire de Disque, puis appuyez sur le bouton OK ou ƃ. DD Gestionnairede Disque Espace utilisé 000:39 Espace disponible 065:19 XP ( 231.01 GB) ( 1.68 GB) 3. Appuyez sur les boutons Ƃƃ pour sélectionner Format, puis appuyez sur le bouton OK.
M Une fois le disque finalisé, vous ne pouvez plus supprimer des entrées dans la liste d’enregistrements. Une fois finalisé, le DVD±R/-RW (mode V) fonctionne de la même manière qu’un DVD-Vidéo. En fonction du type de disque, l’écran affiché peut différer. La durée de finalisation peut différer en fonction du volume de données enregistré sur le disque. Les données du disque seront endommagées si le graveur est éteint pendant le processus de finalisation.
fiche technique DÉPANNAGE Si votre appareil connaît des dysfonctionnements, passez en revue les points de contrôle avant de contacter un centre de service après-vente agréé Samsung. PROBLÈME EXPLICATION/SOLUTION L’entrée s’affiche pendant un instant à la mise sous tension. Le GRAVEUR DE DVD AVEC DISQUE DUR nécessite quelques minutes pour s’initialiser et l’entrée s’affiche durant environ 10 secondes après la mise sous tension. Impossible d’enregistrer des programmes télévisés.
PROBLÈME EXPLICATION/SOLUTION • Etes-vous en train de visualiser un programme en mode lent ou saut ? Si vous lisez un programme à une vitesse autre que la vitesse normale, vous n’entendrez aucun son. (hormis pour la recherche vers l’avant (X 2) du disque). • Vérifiez les branchements et les paramètres. (Reportez-vous aux pages 27 et 29, 40 et 41) • Vérifiez si le disque est endommagé. Nettoyez le disque, si nécessaire. • Vérifiez si le disque est inséré correctement face étiquetée vers le haut.
annexe CARACTÉRISTIQUES Généralités Entrée Alimentation AC 220~240 V, 50 Hz Consommation d’énergie 30 Watts / 2,2 Watts (en veille ) Poids 3,8 Kg Dimensions 430 mm(W) x 300 mm(D) x 55 mm(H) Température d’exploitation +5 °C à +35 °C Autres exigences Maintenez l’appareil de niveau lors du fonctionnement. Humidité de fonctionnement inférieure à 75% Vidéo Vidéo composite : 1,0 V p-p avec une charge de 75 sync. négative Audio Niveau d’entrée audio maxi.
FRANCE Chers clients, nous vous remercions d'avoir acheté un produit SAMSUNG. La présente carte à pour objet de préciser les modalités de la garantie que la société Samsung Electronics France vous offre indépendamment des garanties qui vous sont déjà offertes par le revendeur à qui vous avez acheté votre produit, et des garanties prévues par la loi (notamment la garantie des vices cachés prévue aux articles 1641 et suivants du Code civil, et la garantie légale de conformité prévue aux articles L.
Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
Comment éliminer ce produit (déchets d’équipements électriques et électroniques) (Applicable dans les pays de l’Union Européen et aux autres pays européens disposant de systémes de collecte sélective) Ce symbole sur le produit ou sa documentation indique qu’il ne doit pas être éliminé en fin de vie avec les autres déchets ménagers.
DVD-HR773 DVD-HR775 DVD-HR777 DVD gebruiksaanwijzing ongekende mogelijkheden Bedankt voor het aanschaffen van dit Samsung-product. Registreer uw product op www.samsung.com/global/register voor een zo compleet mogelijke service.
aan de slag WAARSCHUWING OM HET RISICO OPELEKTRISCHE SCHOKKEN TE BEPERKEN, DIENT U DE BEHUIZING (OF DE ACHTERZIJDE) NIET TE VERWIJDEREN. DIT APPARAAT BEVAT GEEN ONDERDELEN DIE DOOR DE GEBRUIKER KUNNEN WORDEN ONDERHOUDEN OF GEREPAREERD. LAAT ONDERHOUD EN REPARATIES OVER AAN EEN GEKWALIFICEERDE MONTEUR. LET OP GEVAAR VOOR ELEKTRISCHE SCHOKKEN NIET OPENEN Dit symbool duidt op gevaarlijke spanning binnen het product.
VOORZORGSMAATREGELEN Belangrijke veiligheidsinstructies Lees deze bedieningsinstructies zorgvuldig door voordat u het apparaat gebruikt. Volg alle onderstaande veiligheidsinstructies op. Houd deze instructies bij de hand voor toekomstig gebruik. Lees deze instructies. 2) Bewaar deze instructies. 3) Let op alle waarschuwingen. 4) Volg alle instructies op. 5) Gebruik dit apparaat niet in de buurt van water. 6) Reinig het apparaat alleen met een droge doek. 7) Blokkeer geen ventilatieopeningen.
aan de slag Onderhoud van behuizing Zorg er om veiligheidsredenen voor dat u de stekker uit het stopcontact haalt. • Gebruik geen benzine, thinner of andere oplosmiddelen. • Veeg de behuizing met een zachte doek schoon. HDD (Hard Disk Drive) De vaste schijf beschikt over een hoge opslagdichtheid, waardoor er langdurige opnamen kunnen worden gemaakt en er snelle toegang is tot opgenomen gegevens.
• Bewaar de schijf verticaal. • Bewaar de schijf in een schone beschermhoes. • Als u de HDD & DVD-RECORDER plotseling van een koude naar een warme plek verplaatst, kan condensatie op de werkende onderdelen en lens ontstaan, waardoor de schijf mogelijk op een abnormale manier wordt afgespeeld. Als dit gebeurt, steek dan de stekker niet in een stopcontact en wacht twee uur. Plaats vervolgens de schijf en probeer die opnieuw af te spelen.
aan de slag • Wanneer een DVD-RW die in videomodus is opgenomen, is afgesloten, wordt dit DVD-Video. • In beide modi kunt u afspelen voordat en nadat de DVD is afgesloten, maar nadat de DVD is afgesloten, kunt u niet meer opnemen, verwijderen of bewerken. • Als u in VR-modus en vervolgens in V-modus op de schijf wilt opnemen, moet u Format (Formatteren) uitvoeren.Wees voorzichtig wanneer u Format (Formatteren) uitvoert omdat alle opgenomen gegevens verloren kunnen gaan.
KOPIEERBEVEILIGING • Veel DVD’s bevatten een kopieerbeveiliging. Sluit uw HDD & DVD-RECORDER daarom rechtstreeks aan op uw tv en niet op een videorecorder. Aansluiting via een videorecorder kan leiden tot vervormde weergave van DVD’s met kopieerbeveiliging.
aan de slag Gebruik de volgende schijven niet! • Gebruik in dit apparaat geen schijven van het type LD, CD-G, CD-I, CD-ROM of DVD-ROM. [Opmerking] U kunt de volgende typen schijven afspelen : CD/CD-R/-RW/MP3/JPEG/DVD-VIDEO/DVD-RAM/±RW/±R. Een DVD-RW/-R-schijf die in videomodus op een ander apparaat is opgenomen, kan alleen worden afgespeeld als de schijf is voltooid. • Mogelijk kunt u bepaalde commerciële schijven en DVD-schijven die u buiten uw regio hebt aangeschaft, niet afspelen op dit apparaat.
• TPL ( Target Peripheral List ) Dit product is geen Windows XP-hostsysteem maar een ingebouwd USB-systeem waardoor het aantal ondersteunde USB-apparaten beperkt is. Onderzoek heeft uitgewezen dat de USB-hostfunctionaliteit en compatibiliteit van dit product voor de volgende producten werkt. (We verwachten echter dat het product behalve met deze merken ook in combinatie met vele andere USBapparaten kan worden gebruikt.
inhoud AAN DE SLAG 2 AANSLUITEN EN INSTELLEN 22 2 3 12 13 14 16 18 21 Waarschuwing Voorzorgsmaatregelen Algemene kenmerken Voordat u de gebruiksaanwijzing leest De HDD & DVD-RECORDER gebruiken Uitpakken Beschrijving De toetsen van de afstandsbediening 22 23 24 33 De HDD & DVD-RECORDER aansluiten Extra aansluitingen Antenne + HDD & DVD-RECORDER + externe decoderbox + TV Andere manier voor het aansluiten van de video-uitgangskabel Andere manier voor het aansluiten van de audio-uitgangskabel HDMI/DVI aa
OPNEMEN 66 81 Opneembare DVD’s Opname-indelingen Opnamemodus Beelden die tegen opnemen beveiligd zijn Direct opnemen Van een camcorder kopiëren Een OTR (One Touch Recording) maken Gelijktijdig opnemen en afspelen De functie Time Shift als live signaal Een timer-opname maken De functie ShowView gebruiken ShowView Extended Ga naar de Opnamelijst 81 85 86 87 87 92 93 95 Basisbewerking (Titellijst) De functie Sorteren gebruiken (Titellijst) Navigatiemenu Inhoud selecteren Geavanceerd bewerken (Afspeellijst
aan de slag ALGEMENE KENMERKEN Met dit apparaat kunt u hoogwaardige digitale films afspelen of opnemen op een DVD-RAM/±RW/±R-schijf of op de HDD. Ook kunt u digitale beelden op DVD-RAM/±RW-schijven of op de vaste schijf bewerken. Op vaste schijf (HDD) opnemen • DVD-HR773 U kunt maximaal 264 uur (in EP-modus (8 uur)) aan video-opnamen opslaan op de interne vaste schijf (HDD) van 160 GB (gigabyte).
VOORDAT U DE GEBRUIKSAANWIJZING LEEST Raadpleeg de volgende begrippen voordat u de gebruiksaanwijzing leest. Pictogrammen die in de gebruiksaanwijzing worden gebruikt Pictogram Woord HDD Een beschikbare functie voor de vaste schijf. (HDD). DVD Een beschikbare functie voor DVD of DVD±R/-RW(V)-schijven die zijn afgesloten. RAM Een beschikbare functie voor DVD-RAM’s. -RW Een beschikbare functie voor DVD-RW’s -R +RW +R Een beschikbare functie voor DVD-R’s Een beschikbare functie voor DVD+RW’s.
aan de slag DE HDD & DVD-RECORDER GEBRUIKEN Stap 1: Selecteer het schijftype of de vaste schijf (HDD) Controleer voordat u gaat opnemen de schijftypen die beschikbaar zijn. Als u herhaaldelijk op dezelfde schijf wilt opnemen of als u de schijf na de opname wilt bewerken, kiest u een herschrijfbare DVD±RW- of DVD-RAM-schijf. Als u een opname zonder wijzigingen wilt opslaan, kiest u een niet-herschrijfbare DVD±R.
Stap 3: Opnemen Er bestaan twee verschillende opnamemethoden, Directe opname en Timer-opname. Bij een timer-opname kan én van de vier beschikbare opnamestanden worden gebruikt: XP (hoogste kwaliteit), SP (standaard kwaliteit), LP (lagere kwaliteit) en EP (minste kwaliteit). Hoe lager de kwaliteit, des te langer u kunt opnemen. Wanneer het opnemen in de FRmodus (Flexibele opname) is ingesteld, wordt met de beste kwaliteit opgenomen rekening houdend met de resterende tijd op de schijf.
aan de slag UITPAKKEN Accessoires Controleer of de onderstaande accessoires zijn meegeleverd. USB PAUSE REPEAT Audio- en videokabel RF-kabel voor TV Afstandsbediening Batterijen voor de afstandsbediening (AAA-formaat) Gebruiksaanwijzing Snelstartgids De afstandsbediening voorbereiden Batterijen plaatsen in de afstandsbediening • Open het batterijklepje aan de achterkant van de afstandsbediening. • Plaats twee AAA-batterijen. Let bij het plaatsen op de correcte polariteit (+ en -).
Instelbare TV-codes MERK TOETS SAMSUNG MERK 01, 02, 03, 04, 05, 06, 07, 08, 09 NOBLEX NOKIA TOETS 66 AIWA 82 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 NORDMENDE 72, 73, 75 BANG & OLUFSEN 57 PANASONIC 53, 54, 74, 75 BLAUPUNKT 71 PHILIPS 06, 55, 56, 57 BRANDT 73 PHONOLA 06, 56, 57 BRIONVEGA 57 PIONEER 58, 59, 73, 74 52 RADIOLA 75 RADIOMARELLI 06, 56 57 DAEWOO 19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 RCA 45, 46 EMERSON 64 REX 74 FERGUSON SABA 73 FINLUX
aan de slag BESCHRIJVING Voorpaneel 1 2 8 12 11 10 3 7 6 9 TOETS OPEN/CLOSE Hiermee opent en sluit u de schijflade. DISPLAY Geeft o.a. de afspeelstatus, tijd weer. TOETS PLAY/PAUSE Hiermee speelt u een schijf af of onderbreekt u het afspelen. TOETSEN ZOEKEN/ OVERSLAAN 5 4 Hiermee gaat u naar de volgende/vorige titel, het volgende/vorige hoofdstuk of de volgende/vorige track. (Afspeelmodus) Hiermee selecteert u voorgedefinieerde tv-kanalen.
Achterpaneel Ventilator Zorg dat er minimaal 10 cm ruimte is aan alle kanten van de ventilator wanneer het product wordt geïnstalleerd. 1 3 2 4 5 6 7 8 9 10 1 Ingang voor antennestekker Aansluiten RF-kabel vanaf de antenne. 2 Uitgang voor TVaansluiting Aansluiten RF-kabel op ingang tv-antenne. 3 Aansluiting voor AV2(EXT) INPUT SCART-stekker Aansluiten op apparatuur met een SCART-uitgang. 4 Aansluiting voor AV1(TV) OUTPUT SCART-stekker Aansluiten op apparatuur met een SCART-ingang.
aan de slag Display voorpaneel 10 Aanduiding voor afspelen, openen/sluiten brandt wanneer de afspeelknoppen en de knoppen voor openen/sluiten worden geselecteerd. Aanduiding van de schijf statuspictogram brandt. DVD VIEW-aanduiding brandt wanneer de DVD-modus is geselecteerd. HDD VIEW-aanduiding brandt HDD-modus wordt geselecteerd. USB VIEW-aanduiding brandt wanneer de USB-modus wordt geselecteerd. Aanduiding schijfmedia brandt wanneer er een DVD±RW/±R-schijf wordt geladen.
DE TOETSEN VAN DE AFSTANDSBEDIENING De afstandsbediening van uw HDD- & DVD-RECORDER werkt ook met Samsung-televisies en compatibele merken. Batterijen plaatsen in de afstandsbediening 2. Plaats twee AAA-batterijen. Zorg ervoor dat de ‘+’ en ‘-’ van de batterijen overeenkomen met de afbeelding in het compartiment. Toets TV USB Druk hierop om de tv te bedienen. 3. Sluit het batterijklepje. Bij normaal gebruik van de televisie is de levensduur van de batterijen ongeveer een jaar.
aansluiten en instellen DE HDD & DVD-RECORDER AANSLUITEN Deze paragraaf beschrijft diverse methoden om de HDD & DVD-RECORDER aan te sluiten op andere externe onderdelen en de vereiste Basisinstellingen. Als de televisie over de juiste ingang beschikt, kunt u met de scartkabel de HDD & DVD-RECORDER op de televisie aansluiten. 1. Sluit de RF-antennekabel aan zoals weergegeven. 2. Sluit een uiteinde van de SCART-kabel aan op de AV1-aansluiting op de achterkant van de HDD & DVD-RECORDER. 3.
EXTRA AANSLUITINGEN U kunt uw HDD & DVD-RECORDER aansluiten op een satelliet of digitale tuner. AANSLUITEN EN INSTELLEN extern apparaat (videorecorder/satellietontvanger) - DVD-modus 1. Sluit de AV2-aansluiting van de HDD & DVD-RECORDER en video aan op de aansluiting van de satellietontvanger of digitale tuner met een SCART-kabel. 2. Sluit de AV1-aansluiting aan op de SCART AV-aansluiting op de tv 3. Zet de HDD & DVD-RECORDER, video/satellietontvanger of digitale ontvanger en tv aan. 4.
aansluiten en instellen ANTENNE + HDD & DVD-RECORDER + EXTERNE DECODERBOX + TV Als u de externe decoderbox op de HDD & DVD-RECORDER aansluit, kunt u gecodeerde kanalen (uitzendingen van CANAL+ of Premiere) opnemen die worden ontvangen via de ingebouwde tv-tuner in de HDD & DVD-RECORDER. Muur 3 DECODER 1. Sluit de RF-antennekabels aan zoals is weergegeven. 2. Gebruik een SCART-kabel om de AV1-aansluiting op deze recorder aan te sluiten op de AV SCART-aansluiting op de tv. 3.
ANDERE MANIER VOOR HET AANSLUITEN VAN DE VIDEO-UITGANGSKABEL Er zijn verschillende manieren om videosignalen te verzenden zonder scartkabels te gebruiken. Selecteer uit de onderstaande lijst met video-aansluitingen de aansluiting die voor u het meest geschikt is. • Situatie 1 : Aansluiten op een (Composite) video-uitgang • Situatie 2 : Componentvideo-uitgangen Situatie 1 : Aansluiten op een (Composite) video-uitgang 1.
aansluiten en instellen Situatie 2 : Componentvideo-uitgangen 1. Gebruik componentvideokabels (niet bijgeleverd) om de COMPONENT OUT-aansluitingen (Y, PB, PR) op de HDD & DVD-RECORDER te verbinden met de COMPONENT IN-aansluitingen (Y, PB, PR) op de tv. • Voor een hoge beeldkwaliteit en nauwgezette kleurweergave. 2. Gebruik audiokabels (wit en rood) om de audio-uitgangen op de HDD & DVD-RECORDER aan te sluiten op de audio-ingangen op de TV (of AV-versterker). (zie pagina 27~29). 3.
ANDERE MANIER VOOR HET AANSLUITEN VAN DE AUDIO-UITGANGSKABEL Gefabriceerd onder licentie van het Amerikaanse patentnummer 5,451,942 en andere Amerikaanse en elders in de wereld verstrekte en aangevraagde patenten. DTS en DTS Digital Out zijn geregistreerde handelsmerken en het DTS logo en symbool zijn handelsmerken van DTS, Inc. ©1996-2007 DTS, Inc. Alle rechten voorbehouden. Geproduceerd onder licentie van Dolby Laboratories.
aansluiten en instellen Situatie 2 : Aansluiten op een stereoversterker met AV-uitgangen Gebruik de audio-uitgangen als uw stereoversterker alleen audio-ingangen (L en R) heeft.
Situatie 3: Aansluiten op een AV-versterker met een digitale uitgang Gebruik deze aansluiting als uw versterker een Dolby Digital, MPEG2- of DTS-decoder en een digitale ingang heeft. Voor Dolby Digital-, MPEG2- of DTS-geluid moet u de geluidsinstellingen instellen. Aansluiten op een optische kabel of coaxkabel, afhankelijk van uw versterker.
aansluiten en instellen HDMI/DVI AANSLUITEN OP EEN TV Als uw TV een HDMI/DVI-ingang heeft, sluit u de HDMI/DVI-kabel aan op een TV. U zult genieten van beelden en geluiden met de beste kwaliteit.
J Wit Voor het gebruik van de HDMI-kabel (niet bijgeleverd), dient u de kabel aan te sluiten voordat u het stroomsnoer in het stopcontact steekt, of voordat u “Plug & Play instellen.” heeft voltooid. Sluit de HDMI-kabel niet aan terwijl “Plug & Play instellen” bezig is. Progressieve Scanning wordt automatisch in werking gesteld als HDMI aangesloten is. Als uw TV/HDMI-ontvanger DTS niet ondersteunt, hoort u geen geluid als u een schijf afspeelt in DTS-formaat.
aansluiten en instellen AANSLUITEN OP AV 3 IN- OF DV-IN-AANSLUITINGEN Hiermee kunt u de HDD & DVD-RECORDER op andere externe apparaten aansluiten en hun uitvoer weergeven of opnemen.
Situatie 2 : Een DV-apparaat aansluiten op de DV IN-aansluiting Als uw digitale camcorder een DV-uitgang heeft, sluit u deze aan op de DV-ingang van de HDD & DVDRECORDER. M Als de invoer niet automatisch wordt geselecteerd, gebruikt u de toets INPUT SEL. om de juiste ingang te selecteren. AANSLUITEN OP USB-APPARATEN Hiermee kunt u uw HDD & DVD-RECORDER aansluiten op USB-apparaten. Een USB-geheugen, MP3-speler of digitale camera op de USB HOST aansluiten.
systeem-installatie MENUNAVIGATIE OP HET TV-SCHERM Met de menu’s op het scherm kunt u diverse functies op de HDD & DVD-RECORDER in- of uitschakelen. Druk op de toets MENU om het schermmenu te openen en gebruik vervolgens de volgende toetsen om door de schermmenu’s te navigeren. 1. ▲▼,◄► toetsen Druk op deze toetsen op de afstandsbediening om de selectiebalk te verplaatsen en door de menuopties te bladeren. 2. Toets OK Druk op deze toets op de afstandsbediening om alle nieuwe instellingen te bevestigen. 3.
6. Het automatisch scannen van de zenders wordt gestart. • Het aantal stations dat automatisch door de HDD & DVDRECORDER wordt opgeslagen, hangt af van het aantal gevonden stations. Automatisch scannen van zenders voltooid. Druk op knop [OK] voor automatische instelling van klok. 7. Nadat het automatisch Scannen van zenders is voltooid, wordt de functie voor het automatisch instellen van de klok binnen 10 seconden gestart. Wilt u de klokfunctie direct starten, dan drukt u op OK. OK 8.
systeem-installatie DE KLOK INSTELLEN Met dit menu kunt u de huidige tijd instellen. Om een timer-opname te kunnen maken, moet u eerst de tijd instellen. 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Installen te selecteren en druk vervolgens op de toets OK of ►. HDD & DVD RECORDER HDD Bibliotheek Tijdopname Schijfbeheer 3. Druk op de toetsen ▲▼ om Systeem te selecteren en druk op OK of op de toets ►.
4. Druk op de toetsen ▲▼ om Automatische installatie te selecteren en vervolgens op OK of op de toets ►. De volgende melding verschijnt: “Uw gegevens gaan verloren. Druk op [OK] om door te gaan, op [RETURN] om af te sluiten”. 5. Druk op OK en druk vervolgens op de toetsen ▲▼◄► om uw land te kiezen. • De HDD & DVD-RECORDER zoekt de zenders volgens een voorgedefinieerde voorkeurslijst die overeenkomt met het land dat u hebt geselecteerd.
systeem-installatie DE TAALOPTIES INSTELLEN Als u de taalopties van tevoren instelt, worden deze standaard gebruikt wanneer u een film kijkt. 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Installen te selecteren en druk vervolgens op de toets OK of ►. HDD & DVD RECORDER HDD Bibliotheek Tijdopname 3. Druk op de toetsen ▲▼ om Taal te selecteren en druk op OK of op de toets ►. Het menu met taalinstellingen verschijnt. 4.
Anynet+ (HDMI CEC) Anynet+ is een functie die kan worden gebruikt om met de afstandsbediening van een Samsung-TV de recorder te bedienen. Sluit hiervoor de HDD- & DVD-RECORDER met een HDMI-kabel aan op een Samsung-TV. (Zie pagina’s 30~31) (Dit is alleen mogelijk bij SAMSUNGTV’s die Anynet+ ondersteunen.) 1. Druk op de toetsen ▲▼ om Anynet+ (HDMI CEC) te selecteren en druk op OK of op de toets ►. De Anynet+(HDMI CEC)-items worden weergegeven.
systeem-installatie DE GELUIDSOPTIES INSTELLEN U kunt de HDD & DVD-RECORDER op een externe versterker of thuisbioscoop aansluiten Hiermee kunt u de instellingen van geluidsapparatuur en de geluidsstatus regelen afhankelijk van het gebruikte geluidssysteem. U kunt ook de modus NICAM instellen. 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Installen te selecteren en druk vervolgens op de toets OK of ►. 3. Druk op de toetsen ▲▼ om Geluid te selecteren en druk op OK of op de toets ►. 4.
DRC HDD & DVD RECORDER HDD Bibliotheek Tijdopname Geluid Digitale output : PCM | DTS : Uit | : Aan | : Aan | DRC Schijfbeheer Uit Aan NICAM Installen mVERPL. sSelecteren rTERUG eEINDE NICAM NICAM-programma’s worden verdeeld in 3 typen. NICAM stereo, NICAM mono en tweetalig (transmissie in andere taal). NICAM-programma’s hebben altijd een standaard monogeluid en u kunt het gewenste geluid selecteren door NICAM in of uit te schakelen.
systeem-installatie 3D-ruisonderdrukking (motion adaptive ruisonderdrukking) • Uit : Normaal • Aan : Biedt een helderder beeld via ruisonderdrukking (voor opnames). HDD & DVD RECORDER HDD Video Bibliotheek Normaal/Breedbeeld : 4:3 Letter Box | Tijdopname 3D-ruisonderdrukking Uit Aan HDMI-resolutie : Uit | : 576p | Video-uitvoer : Component | Component uitvoer : Interlace | Schijfbeheer Installen mVERPL.
Video-uitvoer HDD & DVD RECORDER HDD Bibliotheek Tijdopname Schijfbeheer Installen mVERPL. Video Normaal/Breedbeeld : 4:3 Letter Box | 3D-ruisonderdrukking : Uit | HDMI-resolutie : 576p | Video-uitvoer : Component Component Component uitvoer RGB : Interlace sSelecteren rTERUG | eEINDE In de modus Component kunt u de video-uitgang instellen op Progressief of Interlace. Als de HDMI-kabel (niet bijgeleverd) niet is aangesloten, zullen de video-uitgangen als volgt beschikbaar zijn.
systeem-installatie HET KINDERSLOT INSTELLEN Z De functie Kinderslot werkt bij DVD’s die voorzien zijn van een classificatie. Zo kunt u controle houden over het type films waarnaar uw gezin kijkt. Een schijf bevat maximaal acht classificatieniveaus. 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Installen te selecteren en druk vervolgens op de toets OK of ►. 3. Druk op de toetsen ▲▼ om Kinderslot te selecteren en druk op OK of op de toets ►.
DE OPNAMEOPTIES INSTELLEN Hoofdstuk maken CVKL (V-modus) Een DVD-video bestaat uit ‘titels’ en ‘hoofdstukken’. Als u één programma opneemt, wordt één titel gemaakt. Als u deze functie gebruikt, wordt de titel verdeeld in hoofdstukken. HDD & DVD RECORDER DVD-RW(V) Bibliotheek 2. Druk op de toetsen ▲▼ om Opname, te selecteren en druk op OK of op de toets ►.
systeem-installatie EZ bestand CVKL (V-modus) Met behulp van deze functie kunt u een schijf automatisch initialiseren en afsluiten. HDD & DVD RECORDER HDD Bibliotheek 1. Druk op de toetsen ▲▼ om EZ bestand te selecteren en druk vervolgens op de toets OK of ►. 2. Druk op de toetsen ▲▼ om Aan te selecteren en druk vervolgens op de toets OK of ►. Druk op de toets EXIT ( ) om het menu af te sluiten.
afspelen In dit hoofdstuk worden de basisfuncties voor het afspelen per schijftype beschreven. Lees de volgende informatie voordat u een schijf afspeelt. REGIOCODE (ALLEEN DVD-VIDEO) 2 ALL LOGO’S VAN SCHIJVEN DIE KUNNEN WORDEN AFGESPEELD STEREO CREATOR Dolby Digital Stereo DTS PALtv-systeem in Engeland, Frankrijk, Duitsland etc.
afspelen Typen schijven Inhoud schijflogo Opgenomen inhoud Vorm van schijf Maximale speelduur 1 uur (XP: Uitstekende kwaliteit) DVD-RAM Enkelzijdig (12cm) 2 uur (SP: Standaardkwaliteit) (4,7GB) 4 uur (LP: Langdurig afspelen) AUDIO 6 of 8 uur (EP: Verlengd) VIDEO 2 uur (XP: Uitstekende kwaliteit) Dubbelzijdig (12cm) 4 uur (SP: Standaardkwaliteit) (9,4GB) 8 uur (LP: Langdurig afspelen) 12 of 16 uur (EP: Verlengd) 1 uur (XP: Uitstekende kwaliteit) DVD-RW AUDIO VIDEO 12cm (4,7GB) 2 uur (SP: S
Schijven die niet kunnen worden afgespeeld • • • • • • DVD-Video met een andere regiocode dan “2” of “ALL” 3,9 GB DVD-R-schijf voor authoring DVD-RAM/-RW(VR-modus) niet opgenomen overeenkomstig de Video Recording Standard Een DVD±R/DVD-RW (V)-schijf die is opgenomen en niet is afgesloten op een recorder van een andere fabrikant. DVD-ROM/PD/MV-schijf, etc CVD/CD-ROM/CDV/CD-G/CD-I Deze HDD & DVD-RECORDER kan alleen worden gebruikt met schijven die compatibel zijn met de DVD-RAMstandaard, versie 2.0.
afspelen HET SCHIJFMENU EN HET TITELMENU GEBRUIKEN Sommige schijven bevatten een specifiek menusysteem waarmee u speciale functies kunt selecteren voor de titel, hoofdstukken, ondertiteling, voorvertoningen van films, informatie over personages, enzovoort. Voor DVD-Video • Schijfmenu : Druk op de toets DISC MENU om het schijfmenu van de schijf te openen. • Ga naar het instellingenmenu voor het afspelen.
Hoofdstukken, titels of markeringen overslaan SZXCVBKL Vertraagd afspelen SZXCVKLD Druk tijdens pauze op de toets SEARCH (Zoeken) ( ) van de afstandsbediening. • Als u op de toets SEARCH ( ) drukt, 1/2 1/4 1/8 • Als u op de toets SEARCH ( ) drukt, 1/2 1/4 1/8 • Als u de normale afspeelsnelheid wilt hervatten, drukt u op de toets PLAY ( ). ) ingedrukt houdt, wordt de schijf op een kwart van de normale Als u in de pauzestand SEARCH ( snelheid afgespeeld.
afspelen DE TOETS INFO GEBRUIKEN Met de INFO-functies kunt u gemakkelijk naar een gewenste scène zoeken via de titel, het hoofdstuk, de track en het tijdstip. Bovendien kunt u de ondertitelings- en geluidsinstellingen wijzigen en bepaalde functies instellen, waaronder Beeldhoek, Herhalen en Zoomen. Rechtstreeks naar een scène gaan met INFO SZXCVKLD Gebruik deze functie als u naar een bepaalde titel, hoofdstuk of tijd wilt gaan. 1. Druk tijdens het afspelen op de toets INFO. 2.
DE GELUIDSSPOREN EN AUDIOKANALEN SELECTEREN SZXCKLD Hiermee selecteert u een van de geluidssporen die op de schijf zijn opgenomen. U kunt er ook de audiokanalen mee selecteren. U kunt deze functie ook uitvoeren via de toets AUDIO op de afstandsbediening. 1. Druk tijdens het afspelen op de toets INFO. 2. Druk op de toetsen ▲▼ om Geluid te selecteren. AFSPELEN 3. Druk op de toetsen ◄► om het gewenste geluidsspoor of audiokanaal te selecteren.
afspelen Herhalen A-B SZXCVKL 1. Druk tijdens het afspelen op de toets INFO. A-B > Herhalen 2. Druk op de toetsen ▲▼ om Herhalen te selecteren. 3. Druk op de toetsen ◄► om A-B te selecteren en druk op OK. 4. Druk op OK waar u het herhaaldelijk afspelen wilt laten beginnen (A) en druk nogmaals op OK waar u het herhaaldelijk afspelen wilt stoppen (B). Het herhaaldelijk afspelen van het gedeelte A-B begint.
MARKERINGEN GEBRUIKEN SXC (VR-modus) U kunt markeringen plaatsen bij scènes die u nogmaals wilt zien zodat u vanaf de gemarkeerde positie kunt afspelen. Markeringen instellen 1. Druk tijdens het afspelen op de toets MARKER. Markeren 01 02 -- -- -- -- -- -- -- -- N:2 3. Druk op de toetsen ► om naar de volgende positie te gaan. 4. Druk weer op OK wanneer de gewenste scène wordt weergegeven.
afspelen FAVORIETEN GEBRUIKEN ZCVKL (V-modus) Favorieten instellen 1. Druk tijdens het afspelen op de toets MARKER. Ferentie/Favor 2. Druk op OK wanneer de gewenste scène wordt weergegeven. • Het getal 1 wordt weergegeven en de scène wordt in het geheugen opgeslagen. 1 2 - - - - - - - -- 3. Druk op de toetsen ► om naar de volgende positie te gaan. 4. Druk weer op OK wanneer de gewenste scène wordt weergegeven. Het getal 2 wordt weergegeven en de scène wordt in het geheugen opgeslagen.
EEN AUDIO-CD/MP3 AFSPELEN Toetsen op de afstandsbediening voor het afspelen van muziek-CD’s (CD-DA)/MP3 1 De toets SKIP ( pagina. 2 3 2 5 2 De toetsen SEARCH ( X8) (Alleen muziek-CD’s) 3 De toets STOP ( 4 De toets PAUSE ( 5 De toetsen PLAY ( 5 9 6 10 11 7 8 6 ) : naar de volgende of vorige ) : snel afspelen (X2, X4, ) : het afspelen van een track stoppen. ) : afspelen onderbreken. ) en OK : een track afspelen. : een track selecteren.
afspelen Een MP3-schijf afspelen 1. Plaats een MP3-cd in de schijflade. • Het menu wordt weergegeven. 2. Druk op de toetsen ▲▼ om Bibliotheek te selecteren en druk vervolgens op OK of op de toets ►. 3. Druk op de toetsen ▲▼ om Muziek te selecteren en druk vervolgens op OK of op de toets ►. 4. Druk op de toetsen ▲▼ om de gewenste track te selecteren en druk vervolgens op OK. Onderdelen van het MP3-scherm ➀ CD Q Song 1.mp3 Muzieklijst 1/9 Nr. Titel Omvang Y ROOT ➁ ➂ ➃ ► 00:02:22 9 Song 1.
CD import o 1. Druk tijdens het afspelen van de muzieklijst op de RODE toets (A). 2. Druk op de knoppen ▲▼ om CD import te selecteren, en druk vervolgens op OK of op de knop ►. 4. Druk op de toetsen ►▲▼ om de doelmedia te selecteren en druk vervolgens op de toets OK. • Om een nieuwe map te maken, drukt u op de GROENE toets (B). 5. Druk op de RODE toets (A) om Start kopie te selecteren. De melding “Itemnummer: x” wordt weergegeven. 6. Druk op de toetsen ◄► om Start te selecteren en druk op de toets OK.
afspelen Afspeellijst oA 1. Druk tijdens het afspelen van de muzieklijst op de RODE toets (A). 2. Druk op de toetsen ▲▼ om Afspeellijst te selecteren en druk vervolgens op OK of op de toets ►. CD Afspeellijst q U Nr. Titel Lengte Y AFSPEELLIJST E PLAYLIST01 3. Druk op de toetsen ▲▼ om de gewenste afspeellijst te selecteren en druk vervolgens op OK. De geselecteerde tracks worden automatisch afgespeeld. ► 00:02:22 Y AFSPEELLIJST mVERPL.
Naar muzieklijst oA 1. Druk tijdens het afspelen van de afspeellijst op de BLAUWE toets (D). De muzieklijst wordt nu weergegeven. CD Q TRACK04 Afspeellijst 1/4 U Nr. Titel Y PLAYLIST01 R Lengte TRACK04 4:03 002 TRACK02 3:57 ► 00:02:22 003 TRACK06 5:08 I TRACK04 k PLAYLIST01 004 TRACK01 4:19 Nieuwe afspeel Muzieklijst eEINDE Sorteren gebruiken A U kunt de volgorde van de muzieklijst heel eenvoudig wijzigen. 1.
afspelen FOTO-CD’S AFSPELEN G 1. Plaats een JPEG-schijf in de schijflade. • Het menu wordt weergegeven CD Image 1.jpg 2. Druk op de toetsen ▲▼ om Bibliotheek te selecteren en druk op OK of op de toets ►. 3. Druk op de toetsen ▲▼ om Foto te selecteren en druk vervolgens op OK of op de toets ►. • Druk op de toets SKIP ( ) om de volgende 8 foto’s te bekijken. • Druk op de toets SKIP( ) om de vorige 8 foto’s te bekijken. Fotolijst 1/17 ROOT Image 1.jpg Image 10.jpg Image 11.jpg Image 13.jpg Image 14.
Zoom U voert instellingen in door stap 1 t/m 4 op pagina 62 te volgen. 5-1. Druk op de GELE toets (C) om Zoom te selecteren. 6. Telkens wanneer u op de toets OK drukt, wordt de foto tot 4x uitvergroot (vier keer de normale grootte). ➞ X2 ➞ X4 ➞ X2 ➞ Normaal • U opent de Fotolijst met de GELE toets (C). AFSPELEN ❖ Het zoomen stoppen Druk op de GROENE toets (B) of op de toets STOP ( ) of RETURN. Naar fotolijst U voert instellingen in door stap 1 t/m 4 op pagina 62 te volgen. 5-1.
afspelen EEN DIVX AFSPELEN N De toets MENU gebruiken 1. Plaats een DivX-schijf in de schijflade. • Het menu wordt weergegeven CD Movie_01.avi DivX-lijst 1/1 Nr. Titel Omvang 001 Movie_01.avi 162.8MB Y ROOT 2. Druk op de toetsen ▲▼ om Bibliotheek te selecteren en druk vervolgens op OK of op de toets ►. 3 DivX E ROOT 3. Druk op de toetsen ▲▼ om DivX te selecteren en druk vervolgens op OK of op de toets ►. Wijzigen 4.
Westen Afrikaans, Baskisch, Catalaans, Deens, Nederlands, Engels, Faerøers, Fins, Frans, Duits, IJslands, Indonesisch, Italiaans, Maleisisch, Noors, Portugees, Spaans, Swahili, Zweeds Centraal Engels, Albaans, Kroatisch, Tsjechisch, Hongaars, Pools, Roemeens, Servisch(Latin), Slowaaks, Sloveens Grieks Engels, Grieks Cyrillisch Engels, Azerbeidzjaans, Wit-Russisch, Bulgaars, Kazaks, Macedonisch, Russisch, Servisch, Tataars, Oekraïens, Oezbeeks Als de taal van de ondertiteling in verkeerde letters w
opnemen In dit hoofdstuk worden verschillende HDD & DVD-opnamemethoden besproken. Met dit apparaat kunt u op verschillende schijftypen opnemen. Lees voordat u begint de volgende instructies en kies het schijftype op basis van uw voorkeur. OPNEEMBARE DVD’S Met deze recorder kunt u op de volgende schijven opnemen. HDD DVD-RAM DVD-RW DVD-R DVD+RW DVD+R • DVD±RW’s en DVD-RAM’s zijn herschrijfbaar. • DVD±R’s zijn niet herschrijfbaar.
M Sluiten - Hiermee wordt de DVD-RW/±R gesloten zodat geen extra opnamen kunnen worden toegevoegd. Afsluiten ongedaan maken - Hiermee kunt u extra opnamen opslaan op een DVD-RW-schijf die oorspronkelijk op de HDD & DVD-RECORDER zijn opgenomen. - Het afsluiten van een DVD-RW die met DAO (Disc At Once) is opgenomen op een pc, kan niet ongedaan worden gemaakt. - Het afsluiten van een DVD±R kan niet ongedaan worden gemaakt.
opnemen OPNAMEMODUS Kies een van de vier opnamemodi voor de gewenste opnametijd en beeldkwaliteit door de toets REC MODE meerdere malen in te drukken vanuit de stopstand. Over het algemeen neemt de beeldkwaliteit toe naarmate de duur van de opname afneemt. In de modus FR wordt de meest geschikte opnamemodus automatisch aangepast op basis van de overgebleven tijd op de schijf en de lengte van de timer-opname.
• DVD-HR777 Duur van opname Opnamemodus DVD-RAM/±RW/±R XP (Hoge-kwaliteitsmodus) Ong. 68 uur Ong. 1 uur ong. 8,5 Mbps SP (Standaardkwaliteitsmodus) Ong. 135 uur Ong. 2 uur ong. 4,5 Mbps LP (Lange-opnamemodus) Ong. 270 uur Ong. 4 uur ong. 2 Mbps Ong. 405 uur Ong. 6 uur/ ong. 1,6 Mbps Ong. 534 uur Ong. 8 uur/ ong. 1,2 Mbps Ong. 68 uur ~ 534 uur Ong. 1~8 uur EP (Verlengde modus) FR (flexibele opnamemodus) M De opnametijd kan verschillen, afhankelijk van de specifieke opnamecondities.
opnemen DIRECT OPNEMEN SXCVKL Voordat u begint 1. Controleer of de schijf over voldoende beschikbare opnameruimte beschikt. 2. Druk op de toets HDD of DVD. Als u DVD heeft geselecteerd, drukt u op de toets OPEN/CLOSE en plaatst u een opneembare schijf in de schijflade. Druk op de toets OPEN/CLOSE om de schijflade te sluiten. Wacht tot LOAD niet meer op het display van het voorpaneel wordt weergegeven. Het tv-programma opnemen waarnaar u kijkt 1.
De opname tijdelijk onderbreken • • • • Druk op de toets REC PAUSE om een opname te onderbreken. Druk tijdens de onderbreking nogmaals op de toets REC PAUSE om de opname te hervatten. U kunt tijdens de onderbreking van een opname tussen kanalen schakelen door op PROG ( Als u tijdens Rec Pause de DV-modus selecteert, wordt de opname gestopt. Als u tijdens Rec Pause in DV-modus de invoerbron wijzigt, wordt de opname gestopt. ) te drukken.
opnemen De opname beëindigen Druk op de toets STOP ( ) om een opname te beëindigen. • Wanneer u DVD-RAM/±RW/±R-schijven gebruikt, verschijnt de melding “Schijfinformatie wordt bijgewerkt. Wacht een moment.” M U geeft pictogrammen voor het afspelen op het scherm weer door op een richtingspijl op de afstandsbediening te drukken. EEN OTR (ONE TOUCH RECORDING) MAKEN SXCVKL U kunt de HDD & DVD-RECORDER in stappen van 30 minuten maximaal 8 uur laten opnemen door op de toets REC te drukken. 1.
GELIJKTIJDIG OPNEMEN EN AFSPELEN S U kunt afspelen vanaf het begin van het programma dat u aan het opnemen bent. U kunt de eerder opgenomen titels bekijken terwijl een programma wordt opgenomen. De toets PLAY (Afspelen) ( ) gebruiken HDD ► Afspelen OPNEMEN 1. Druk in de opnamemodus op de toets PLAY ( ). De titel die u momenteel aan het opnemen bent, wordt afgespeeld. Het afspelen kan pas tien seconden nadat het opnemen is gestart, beginnen.
opnemen DE FUNCTIE TIME SHIFT ALS LIVE SIGNAAL S Met deze functie worden opnames als een live signaal afgespeeld. Als u tijdens het tv-kijken wordt gestoord, drukt u op de toets TIME SHIFT. De HDD & DVD RECORDER begint nu direct met het opnemen van het programma. Time Shift >Wijzigen Aan sSelecteren De functie Time Shift gebruiken. 1. Druk op de afstandsbediening op de knop TIME SHIFT. Het menu Time Shift wordt weergegeven. 2. Druk op de toetsen ▲▼ om Aan te selecteren, en druk vervolgens op OK. 3.
EEN TIMER-OPNAME MAKEN SXCVKL 1. Controleer of de antennekabel is aangesloten. 2. Controleer de resterende tijd op de schijf. 3. Controleer de datum en de tijd. De klok moet zijn ingesteld voordat u een timer-opname kunt maken. (zie pagina 36) 1. Druk in de stopstand op de toets TIMER. 2. Druk op de knoppen ▲▼ om Geplande lijst te selecteren en druk vervolgens op OK of op de knop ►. HDD & DVD RECORDER HDD Bibliotheek Tijdopname | ShowView | Geplande lijst ShowView Verlengd 3.
opnemen • TITEL : Druk op de RODE toets (A) om de titel een naam te geven. Het scherm voor het wijzigen van de titel verschijnt. Volg stap 4 en 5 van ‘De naam van een titel wijzigen’ op pagina 81~82. 5. Nadat u de waarden voor elke modus hebt ingesteld, drukt u op de toets OK om Opslaan te selecteren. • ’ wordt op het voorpaneel weergegeven. Dit betekent dat een timer-opname is geregistreerd. Als de timer-instellingen elkaar overlappen; De programma’s worden in de volgorde van prioriteit opgenomen.
Een geplande lijst toevoegen Volg de volgende aanwijzingen om een item aan de geplande lijst toe te voegen. Volg voor deze instelling stap 1 en 2 bij “Een timer-opname maken” op pagina 75. 3. Druk op de toetsen ▲▼ om het nummer van de Geplande lijst te selecteren en druk vervolgens op de RODE toets (A). • Stel de items in die u wilt toevoegen. Raadpleeg het gedeelte ‘Een timer-opname maken’ voor meer informatie over invoeritems voor timer-opnamen. (Zie pagina’s 75~76) OPNEMEN 4.
opnemen DE FUNCTIE SHOWVIEW GEBRUIKEN SXCVKL Voor het instellen van uw HDD- & DVD-recorder. • Schakel zowel de televisie als de HDD & DVD-RECORDER in. • Controleer de datum en de tijd. Er kunnen maximaal twaalf programma’s worden ingesteld. 1. Druk in de stopstand op de toets TIMER. 2. Druk op de toetsen ▲▼ om ShowView te selecteren en druk op OK of op de toets ►. • Er verschijnt een melding waarmee u de ShowView-code kunt invoeren. 3.
SHOWVIEW EXTENDED Om vertragingen of overschrijdingen van de maximumtijd te voorkomen, beschikt de HDD & DVD-RECORDER over de functie ShowView Extended (ShowView Verlengd). Met deze functie kunt u de opnametijd maximaal 60 minuten verlengen. • Gebruik deze functie alleen als PDC niet beschikbaar is of is uitgeschakeld. 1. Druk in de stopstand op de toets TIMER. 2. Druk op de toetsen ▲▼ om ShowView Verlengd te selecteren en druk op OK of op de toets ►.
opnemen Opnamelijst wissen Hiermee kunt u de hele Opnamelijst in één keer verwijderen. 3-1. Druk op de GROENE toets (B). 4. Druk op de toetsen ◄► om Ja te selecteren en druk vervolgens op de toets OK. HDD Opnamelijst Nr. Naar Bron Datum Begin Einde 01 HDD PR 01 Jan 01 17:30 18:30 SP Aan OK 02 HDD PR 01 Jan 01 21:00 22:00 SP Aan OK 03 HDD PR 01 23:15 23:45 SP Aan WiltJanu 01een opgenomen lijst wissen? OK Ja Verw. mVERPL. Alles verw.
bewerken BASISBEWERKING (TITELLIJST) De titel afspelen SXCVKL Volg deze instructies om een scène uit de titellijst af te spelen. N De toets TITLE LIST gebruiken 1. Druk in de stopstand/afspeelstand op de toets TITLE LIST. 2. Druk op de toetsen ▲▼ om in de titellijst de titel te selecteren die u wilt afspelen en druk vervolgens op OK of PLAY ( ). De geselecteerde titel wordt afgespeeld. 3. U stopt het afspelen van de titel door op STOP ( Het scherm keert terug naar het scherm Titellijst. ) te drukken.
bewerken 5. Druk op de BLAUWE toets (D) om Opslaan te selecteren. De gewijzigde titel wordt weergegeven in het titelveld van het geselecteerde afspeellijst-item. HDD Hernoemen Sports(A1) Backspace mVERPL. Spatie Verwijdere sSelecteren rTERUG Opslaan eEINDE Een titel vergrendelen (Beveiliging) SXCVKL Volg onderstaande instructies om een titel te vergrendelen en zo te voorkomen dat deze per ongeluk wordt verwijderd. N De toets TITLE LIST gebruiken 1.
Een titel verwijderen SXCVKL Volg onderstaande instructies om een titel uit de titellijst te verwijderen. N De toets TITLE LIST gebruiken 1. Druk in de stopstand/afspeelstand op de toets TITLE LIST. 3. Druk op de RODE toets (A) om Wijzigen te selecteren. Het menu Wijzigen wordt weergegeven. Titellijst 2/3 Nr. Verw. Kopiëren 3 MPEG2 Beveiliging 4 Jan/02/2008 Nieuwe afspeell.
bewerken Een deel van een titel afsplitsen (Opsplitsen) SK Volg onderstaande instructies om een gedeelte van een titel uit de titellijst af te splitsen N De toets TITLE LIST gebruiken 1. Druk in de stopstand/afspeelstand op de toets TITLE LIST. 2. Druk op de toetsen ▲▼ om in de titellijst de titel te selecteren waarvan u een deel wilt afsplitsen en druk vervolgens op RODE toets (A). Het menu Wijzigen verschijnt. 3.
4. Druk bij het startpunt op OK. Het beeld en de tijd van het startpunt worden weergegeven in het startpuntvenster voor sectieverwijdering. • Gebruik de afspeeltoetsen om de start- en eindpunten te selecteren van de sectie die u wilt verwijderen. )). • Afspeeltoetsen : (PLAY ( ), PAUSE ( ), SEARCH ( 5. Druk bij het eindpunt op OK. Het beeld en de tijd van het eindpunt worden weergegeven in het eindpuntvenster voor sectieverwijdering. 6. Druk op ◄► om Verw. te selecteren en druk vervolgens op OK.
bewerken NAVIGATIEMENU Tijdnavigatie SXC (VR-modus) Met deze functie kunt u minuutsgewijs zoeken naar een scène uit de lijst met opgenomen titels. N De toets TITLE LIST gebruiken 1. Druk in de stopstand/afspeelstand op de toets TITLE LIST. 2. Druk op de toetsen ▲▼ om in de titellijst de titel te selecteren die u wilt afspelen en druk vervolgens op de GELE toets (C). 3. Druk op de toetsen ▲▼ om Tijdnavigatie te selecteren en druk vervolgens op OK of op de toets ►. 4.
INHOUD SELECTEREN SXCVKL 1. Druk op de BLAUWE toets (D) om Inhoud te selecteren. 2. Druk op de toetsen ▲▼ om de inhoud te selecteren die u wilt verplaatsen en druk vervolgens op de toets OK of ►. M Deze functie is alleen beschikbaar als de schijf de geselecteerde inhoud bevat. HDD JAN/01/2008 17:30 PR1 Titellijst 1/3 Nr.
bewerken Titels in de afspeellijst afspelen SXC (VR-modus) Volg onderstaande instructies om de afspeellijsttitels af te spelen. N De toets PLAY LIST gebruiken 1. Druk in de stopstand/afspeelstand op de toets PLAY LIST. 2. Druk op de toetsen ▲▼ om de afspeellijst te selecteren die u wilt afspelen en druk op OK of de toets PLAY ( ). 3. Druk op STOP ( ) om het afspelen te stoppen. Het scherm keert terug naar het scherm Afspeellijst. HDD JAN/02/2008 13:47 Afspeellijst 1/3 Nr.
Een scène bewerken voor de afspeellijst SXC (VR-modus) Volg onderstaande instructies om scènes voor een afspeellijst te bewerken. N De toets PLAY LIST gebruiken 1. Druk in de stopstand/afspeelstand op de toets PLAY LIST. 3. Druk op de toetsen ▲▼ om Afspeell. Bew. te selecteren en druk op OK of op de toets ►. Het scherm Afspeellijst bewerken wordt weergegeven. Afspeellijst 1/3 Nr. Verw. Kopiëren i AFSPEELLIJST Hernoemen 4 Jan/02/2008 Afspeell. Bew. 13:47 7 6afspeell.
bewerken Een scène verplaatsen (de positie van een scène wijzigen) U voert instellingen in door stap 1 t/m 3 op pagina 89 te volgen. 4-1. Druk op de toetsen ▲▼ ◄► om de scène te selecteren die u wilt verplaatsen (van positie wilt veranderen) en druk vervolgens op de GROENE toets (B). • Er verschijnt een geel selectievenster op de te verplaatsen scène. 5. Druk op de toetsen ▲▼ ◄► om de positie te selecteren waarnaar u de geselecteerde scène wilt verplaatsen en druk vervolgens op OK.
Een afspeellijst-item uit de afspeellijst verwijderen N De toets PLAY LIST gebruiken 1. Druk in de stopstand/afspeelstand op de toets PLAY LIST. 3. Druk op de RODE toets (A) om Wijzigen te selecteren Het menu Wijzigen wordt weergegeven. 4. Druk op de toetsen ▲▼ om Verw. te selecteren en druk op OK of op de toets ►. • De melding bij verwijderen “Wilt u verwijderen?” verschijnt. 5. Druk op ◄► om Ja te selecteren en druk vervolgens op OK.
bewerken KOPIËREN VAN HDD NAAR DVD OF VICE VERSA Het kopieerscherm 1 HDD Geselecteerde items: Kopiëren Beschikbaar : 4099MB Bron : HDD 2 001 JAN/01/2008 1 4 DVD 002 JAN/01/2008 1 3 MPEG2 003 JAN/01/2008 1 0 SP 8 47MB Start kopie Sorteren Selectie a Markeren 5 3 Naar : DVD 6 1 Totale grootte en aantal geselecteerde titels om te kopiëren 2 Te kopiëren titel 3 Hiermee wordt de beschikbare schijfruimte weergegeven 4 Hier worden de gekopieerde bestanden bewaard 5 Toets voor starten van
7. Druk op de RODE toets (A) om Start kopie te selecteren. • De titel die wordt gekopieerd wordt niet op het scherm weergegeven en het kopiëren begint terwijl het huidige programma op het scherm wordt weergegeven. • Druk op de knop INFO om de voortgangsbalk van kopiëren weer te geven. Als u nogmaals op de knop INFO drukt, wordt de voortgangsbalk van kopiëren niet meer weergegeven. • Als u het kopiëren wilt annuleren, drukt u op de RODE toets (A). x 21% b Staaftype Annuleren c Kanaal 8.
bewerken 6. Druk op de toetsen ▲▼ om het MP3-, foto- of DivX-bestand te selecteren dat u wilt kopiëren en houd vervolgens de toets MARKER ingedrukt totdat er een vinkje wordt weergegeven. • Als u een bepaald gemarkeerd item niet wilt kopiëren, selecteert u dit item en houdt u de toets MARKER ingedrukt totdat het vinkje verdwijnt. 7. Selecteer met ►▲▼ een doelmedia en druk vervolgens op OK. • Om een nieuwe map te maken, drukt u op de GROENE toets (B). 8.
M Wanneer u op de toets EXIT ( DE NAAM VAN EEN MUZIEK-, FOTO- OF DIVX-BESTAND WIJZIGEN S U kunt de naam wijzigen van een muziek-, foto- of DivX-bestand dat u naar de HDD hebt gekopieerd. 1. Druk op de toetsen ▲▼ om de titel te selecteren die u wilt hernoemen en druk op vervolgens op de RODE toets (A). 2. Druk op de toetsen ▲▼ om Hernoemen te selecteren en druk vervolgens op de toets OK of ►. Het scherm Hernoemen wordt weergegeven. 3.
bewerken SCHIJVEN BEHEREN De naam van de schijf bewerken XCVKL Gebruik onderstaande instructies om een schijf een naam te geven. 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Schijfbeheer te selecteren en druk vervolgens op OK of op de toets ►. 3. Druk op ◄► om Hernoemen te selecteren en druk vervolgens op OK. Het scherm Hernoemen verschijnt. 4. Selecteer de gewenste tekens met de toetsen ▲▼ ◄► en druk vervolgens op de toets OK. 5.
Alle titellijsten verwijderen XCVKL 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Schijfbeheer te selecteren en druk vervolgens op OK of op de toets ►. 4. Druk op ◄► om Ja te selecteren en druk vervolgens op OK. Alle titellijsten worden verwijderd. Schijfbeheer Schijfnaam DVD-VR Gebruikte ruimte 00:17 ( 0.52 GB) Beschikbare ruimte 01:54 SP ( 3.85 GB) Info schijfbeveiliging Niet Beveiligd Huidige opnamemodus VR-modus Hernoemen
bewerken Een schijf formatteren SXCK Gebruik deze instructies om een schijf te formatteren. De schijfbeveiliging moet ook worden gewist. 1. Druk in de stopstand op de toets MENU. HDD 2. Druk op de toetsen ▲▼ om Schijfbeheer te selecteren en druk vervolgens op OK of op de toets ►. Schijfbeheer Gebruikte ruimte 000:39 ( 1.68 GB) Beschikbare ruimte 065:19 XP ( 231.01 GB) 3. Druk op de toetsen ◄► om Formatteren te selecteren en druk vervolgens op OK. HDD/ DVD-RAM/+RW Verw.
M Wanneer een schijf eenmaal is afgesloten, kunt u geen items uit de lijst van opnamen verwijderen. Nadat de schijf is afgesloten, werkt de DVD±R/-RW (videomodus) op dezelfde manier als een DVD-videospeler. Afhankelijk van het type schijf kan het weergegeven scherm verschillen. De afsluittijd kan verschillen, afhankelijk van de hoeveelheid gegevens die op de schijf zijn opgenomen. De gegevens op een schijf raken beschadigd, als de recorder wordt uitgeschakeld tijdens het afsluiten.
naslag PROBLEMEN OPLOSSEN Als het product niet goed werkt, gaat u de onderstaande controlepunten na voordat u contact opneemt met een erkend servicecentrum van Samsung. PROBLEEM VERKLARING/OPLOSSING De invoer wordt even weergegeven wanneer het apparaat wordt ingeschakeld. Nadat de HDD & DVD-RECORDER is ingeschakeld, duurt het even voordat deze geïnitialiseerd is en de invoer wordt ongeveer tien seconden nadat het apparaat is ingeschakeld, weergegeven. Ik kan geen TV-programma’s opnemen.
PROBLEEM VERKLARING/OPLOSSING • Speelt u een programma vertraagd af of slaat u scènes over? Als u een programma met een andere snelheid dan de normale snelheid afspeelt, hoort u geen geluid. (behalve voor vooruit zoeken (X 2) op de schijf.) • Controleer de aansluitingen en de instellingen. (Zie pagina’s 27~29, 40~41) • Controleer of de schijf is beschadigd. Maak de schijf schoon, indien nodig. • Controleer of de schijf is geplaatst met het etiket aan de bovenzijde. Er is geen audio-uitvoer.
bijlage SPECIFICATIES Algemeen Ingang Stroomvereisten AC 220~240 V, 50 Hz Energieverbruik 30 Watts / 2,2 Watts (Uitgeschakeld ) Gewicht 3,8 Kg Afmetingen 430 mm(W) x 300 mm(D) x 55 mm(H) Gebruikstemperatuur +5 °C tot +35 °C Overige condities Houd het apparaat horizontaal als dit is ingeschakeld. Zorg voor minder dan 75% bedrijfsvochtigheid Video Composiet Video : 1.0 V p-p bij 75Ω belasting, sync negatief Audio Max.
NEDERLAND BELGIË Dit Samsung-product is gegarandeerd tegen fabricage- en/of materiaalfouten voor een periode van twaalf (12) maanden gerekend vanaf de oorspronkelijke aankoopdatum, tenzij in de nationale of Europese wet- of regelgeving een andere garantieperiode is vastgesteld. Indien aanspraak wordt gemaakt op een reparatie onder garantie, dient u het product te retourneren aan de winkelier waar u het product gekocht heeft.
LUXEMBOURG BELGIQUE Cet appareil Samsung est couvert par une garantie de douze (12) mois - à moins qu’une autre période de garantie ne soit fixée dans la législation ou réglementation nationale ou européenne - à partir de la date d’achat, pour des défauts de fabrication et/ou matériaux utilisés. Pour revendiquer le droit de réparation sous garantie, vous devez retourner l’appareil chez le revendeur où vous l’avez acheté.
SAMSUNG KLANTENSERVICE Mocht u vragen of opmerkingen met betrekking tot Samsung producten hebben, neem dan a.u.b. contact op met de SAMSUNG klantenservice. Regio North America Latin America Land CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
Correcte verwijdering van dit product (elektrische & elektronische afvalapparatuur) Dit merkteken op het product of het bijbehorende informatiemateriaal duidt erop dat het niet met ander huishoudelijk afval verwijderd mag worden aan het einde van zijn gebruiksduur.