Operation Manual

16_ getting started
getting started
UNPACKING
Accessories
Check for the supplied accessories below.
PAUSE
REPEAT
USB
Video/Audio Cable RF Cable for TV Remote Control
Batteries for Remote Control (AAA Size) Instruction Manual Quick Guide
Preparing the Remote Control
Install Batteries in the Remote Control
Open the battery cover on the back of the remote control.
Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly.
Replace the battery cover.
If the remote does not operate properly:
Check the polarity +/– of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fl uorescent lighting nearby.
Dispose of batteries according to local environmental regulations. Do not put them in the household
trash.
To determine whether your television is compatible, follow the instructions below.
Switch your television on.
Point the remote control towards the television.
Press and hold the TV STANDBY/ON button and enter the two-fi gure code corresponding to the brand
of your television, by pressing the appropriate number buttons.
•
•
•
•
•
•
•
1.
2.
3.