Operation Manual
40_ system setup
system setup
SETTING UP THE AUDIO OPTIONS
You can connect the HDD & DVD RECORDER to an external amp or Home theatre.
Allows you to setup the Audio device and sound status depending on the audio system in use.
You can also set NICAM mode.
With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
Press the ▲▼ buttons to select Audio, then press the OK or ►
button.
Press the ▲▼ buttons to select the desired audio option, then
press the OK or ► button.
Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
Digital Output
PCM : Select this when your equipment does not decode Dolby
Digital (or MPEG-2) compatible.
Bitstream : Outputs Dolby Digital (or MPEG-2) audio as bitstream.
Select this when your AV receiver or AV amplifi er has a Dolby Digital
(or MPEG-2) Decoder.
Digital output setting is equally applied to both Dolby Digital and MPEG-
2 audio. LPCM sound track is always outputted as PCM. It has no
relation with Digital Output setting.
Be sure to select the correct Digital Output or you will hear no sound or
a loud noise.
DTS
Off : Doesn’t output DTS signal. Select this when your AV receiver (or
AV amplifi er) does not have a DTS decoder.
On : Outputs DTS Bitstream via digital output when you play DTS
track. Select this only when your AV receiver (or AV amplifi er) has a
DTS decoder.
When DTS soundtrack is played, sound does not output from AV Audio
Output.
1.
2.
3.
4.
5.
•
•
M
•
•
M
HDD & DVD RECORDER Setup
HDD
Library
Timer Record
Disc Manager
Setup
System
Channel Set
Language
Audio
Video
Parental Lock
1
Recording
|
|
|
|
|
|
|
m
MOVE
s
SELECT
r
RETURN
e
EXIT
HDD & DVD RECORDER Audio
HDD
Library
Timer Record
Disc Manager
Setup
Digital Output : PCM
DTS : Off
DRC : On
NICAM : On
|
|
|
|
m
MOVE
s
SELECT
r
RETURN
e
EXIT
PCM
Bitstream
HDD & DVD RECORDER Audio
HDD
Library
Timer Record
Disc Manager
Setup
Digital Output : PCM
DTS : Off
DRC : On
NICAM : On
|
|
|
|
m
MOVE
s
SELECT
r
RETURN
e
EXIT
Off
On