DVD-HR773 DVD-HR775 DVD-HR777 DVD user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
getting started Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
Precaution Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
getting started Maintenance of Cabinet For safety reasons, be sure to disconnect the AC power cord from the AC outlet. ~ Do not use benzene, thinner, or other solvents for cleaning. ~ Wipe the cabinet with a soft cloth. HDD (Hard Disk Drive) The hard disk has a high storage density, which enables long recording durations and quick access to written data. However, it can easily be damaged by shock, vibration or dust and should be kept away from magnets.
~ Keep in a clean protection jacket. ~ If you move your HDD & DVD RECORDER suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. Disc Specifications This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD.
getting started ~ In both modes, playback can be performed before and after finalisation, but additional recording, deleting and editing can not be performed after finalisation. ~ If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost. ~ A DVD-RW blank disc is initialized to VR Mode when first initialized.
COPY PROTECTION ~ Many DVD discs are encoded with copy protection. Because of this, you should only connect your HDD & DVD RECORDER directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. ~ This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
getting started Do not use the following discs! ~ LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product. [Note] Disc types that can be played : CD/CD-R/-RW/MP3/JPEG/DVD-Video/DVD-RAM/±RW/±R. For a DVD-RW/±R disc, which has been recorded in Video Mode on another component, it can play only when finalised. ~ Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.
~ TPL ( Target Peripheral List ) Since this product is not a Windows XP but a embedded USB host system, naturally the supported USB devices cannot help being limited. The USB host functionality and compatibility of this product have been proved with following items.
contents getting started 2 3 12 13 14 16 18 21 Warning Precaution General Features Before reading the user’s manual How to use the HDD & DVD RECORDER Unpacking Description Tour of the Remote Control connecting & setting up 22 23 24 25 27 30 32 33 Connecting the HDD & DVD RECORDER Additional connections Antenna + HDD & DVD RECORDER + External decoder box + TV Other type of connecting the Video output cable Other type of connecting the Audio output cable Connecting HDMI/DVI to a TV Connecting to AV 3 IN,
68 69 70 71 72 73 74 75 76 77 79 Recordable Discs Recording Formats Recording Mode Unrecordable pictures Recording immediately Copying from a Camcorder Making a One Touch Recording (OTR) Simultaneous Recording and Playback Time Shift function as a live signal Making a Timer Recording Go To Recorded List editing 81 85 86 87 87 92 93 95 96 Basic Editing (Title List) Using the Sort function (Title List) Navigation Menu Select Contents Advanced Editing (Playlist) Copying from HDD to DVD or VICE-VERSA Copyin
getting started General Features This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD. You can also edit digital images on DVD-RAM/±RW discs or HDD. DD Recording H ~ DVD-HR773 You can record up to Approx. 264 hours of video (in EP mode (8 Hours)) on the internal 160GB (gigabyte) hard disk (HDD). ~ DVD-HR775 You can record up to Approx. 421 hours of video (in EP mode (8 Hours)) on the internal 250GB (gigabyte) hard disk (HDD).
Before reading the user’s manual Make sure to check the following terms before reading the user manual. Icons that will be used in manual Icon Definition HDD This involves a function available on the HDD. DVD This involves a function available on DVD or DVD±R/-RW(V) discs that have been finalised. RAM This involves a function available on DVD-RAM. -RW This involves a function available on DVD-RW. -R +RW +R This involves a function available on DVD-R. This involves a function available on DVD+RW.
getting started How to use the HDD & DVD RECORDER Step 1: Select the disc type or HDD Please check available disc type before recording. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVD±R. You can record files directly to the built-in HDD or edit a recorded file.
Step 3 : Recording There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classified as follows: Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc. Step 4 : Playing A DVD consists of sections, called titles, and sub- sections, called chapters.
getting started Unpacking Accessories Check for the supplied accessories below. USB PAUSE REPEAT Video/Audio Cable RF Cable for TV Remote Control Batteries for Remote Control (AAA Size) Instruction Manual Quick Guide Preparing the Remote Control Install Batteries in the Remote Control ~ Open the battery cover on the back of the remote control. ~ Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly. ~ Replace the battery cover.
Controllable TV Codes BRAND BUTTON SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09 BRAND BUTTON NOBLEX 66 NOKIA 74 82 10, 11, 12, 13, 14, 15, 16, 17, 18 NORDMENDE 72, 73, 75 BANG & OLUFSEN 57 PANASONIC 53, 54, 74, 75 BLAUPUNKT 71 PHILIPS 06, 55, 56, 57 BRANDT 73 PHONOLA 06, 56, 57 BRIONVEGA 57 PIONEER 58, 59, 73, 74 CGE 52 RADIOLA 06, 56 CONTINENTAL EDISON 75 RADIOMARELLI 57 DAEWOO 19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 RCA 45, 46 EMERSON 64 REX 74 FER
getting started Description Front Panel 1 2 8 12 11 10 3 7 6 5 4 9 OPEN/CLOSE button Opens and closes the disc tray. DISPLAY Displays the playing status, time, etc. PLAY/PAUSE button Plays a disc or pauses playback. SEARCH/SKIP buttons Goes to the next title/chapter/track or goes back to the previous title/chapter/track. (Playback mode) Select TV preset Channels. (Stop mode) STOP button Stops disc playback. REC button Starts recording. HDD/DVD button Selects HDD/DVD mode.
Rear Panel 10 9 8 7 6 getting started 4 5 Fan The fan always revolves when the power is on. Ensure a minimum of 10 cm clear space on all sides of the fan when installing the product. 1 In from aerial connector Connects RF cable from antenna. 2 VIDEO OUT Connects the input of external equipment using a Video cable. 3 AV2(EXT) INPUT SCART connector Connects to equipment having SCART output jack.
getting started Front Panel Display 10 Playback-related, Open/Close indicator Lights when playback-related and open/close buttons are selected. In Disc Indicator Lights status icon. DVD VIEW Indicator Lights when DVD mode is selected. HDD VIEW Indicator Lights when HDD mode is selected. USB VIEW Indicator Lights when USB mode is selected. Disc Media Indicator Lights when a DVD±RW/±R disc is loaded. TIMER Indicator Lights to indicate the timer record mode.
Tour of the Remote Control Your HDD & DVD RECORDER remote control will work with Samsung televisions and compatible brands. Installing batteries in the Remote Control . Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. TV button USB Press this to operate TV. . Replace the cover. Assuming typical TV usage, the batteries last for about one year.
connecting & setting up Connecting the HDD & DVD RECORDER This section involves various methods of connecting the HDD & DVD RECORDER to other external components and required initial setting modes. You can connect your HDD & DVD RECORDER to the television using the SCART cable if the appropriate input is available on the television. 1. Connect the RF cable as shown. 2. Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD RECORDER. 3.
Additional connections You can connect your HDD & DVD RECORDER to a satellite or digital tuner. connecting & setting up External device (VCR/Satellite receiver) 1 - DVD mode 1. Connect the AV2 connector of HDD & DVD RECORDER and VCR/Satellite receiver or digital tuner using a SCART cable. 2. Connect the AV1 connector to the SCART AV connector on TV. 3. Turn on the HDD & DVD RECORDER, VCR/Satellite receiver or digital tuner and TV. 4. Set Input mode on AV2. - TV mode 1.
connecting & setting up Antenna + HDD & DVD RECORDER + External decoder box + TV If you connect external decoder box to HDD & DVD RECORDER, you can record scrambled channels (CANAL+ or Premiere broadcasts) received through the built-in TV tuner in HDD & DVD RECORDER. Wall DECODER 3 1. Connect RF antenna cables as shown. 2. Connect the AV1 connector on this recorder to the SCART AV connector on TV using a SCART cable. 3. Connect the AV2 connector to a SCART AV connector on decoder box. 4.
Other type of connecting the Video output cable There are several ways to output a video signal not using scart cables. Select one of the following video connections that best suits. ~ Case 1 : Connecting to a Video (Composite) output jack ~ Case 2 : Component Video output jacks Case 1 : Connecting to a Video (Composite) output jack 1. Connect a video (Yellow) cable between the VIDEO (yellow) OUT jack on HDD & DVD RECORDER and VIDEO (yellow) INPUT jack on your TV (or AV amplifier).
connecting & setting up Case 2 : Component Video output jacks 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y, Pb, Pr) jacks on HDD & DVD RECORDER and COMPONENT IN(Y, Pb, Pr) jacks on your TV. ~ You will enjoy high quality and accurate colour reproduction images. 2. Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier). (See pages 27~29). 3. After connecting, refer to the page 44.
Other type of connecting the Audio output cable Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2009 DTS, Inc. All Rights Reserved. Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
connecting & setting up Case 2 : Connecting to a stereo amplifier with AV output jacks If your stereo amplifier only has AUDIO INPUT jacks (L and R), use the AUDIO OUT jacks Red White 28_ connecting & setting up Front(L) speaker Front(R) speaker
Case 3: Connecting to an AV amplifier with a digital output jack If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings. According to your amplifier, connect to an optical cable or a coaxial cable.
connecting & setting up Connecting HDMI/DVI to a TV If your TV has a HDMI/DVI input, connect HDMI/DVI Adapter cable to a TV. You will enjoy the best quality images and sounds. ~ Case 1 : Connecting to a TV with HDMI Jack ~ Case 2 : Connecting to a TV with DVI Jack Case 1 : Connecting to a TV with HDMI Jack ~ Using the HDMI cable (not supplied) connect the HDMI OUT jack on the rear of the HDD & DVD RECORDER to the HDMI IN jack of your TV.
J connecting & setting up Red White ` To use an HDMI cable (not supplied), make the Audio/Video connection before plugging in the power cord or after finishing the “Plug & Play Setup.” Do not connect the HDMI cable while the “Plug & Play Setup” is progressing. ` ` ` ` Progressive scan automatically activates when HDMI is connected. If TV/HDMI Receiver does not support DTS, Audio output is not available when you play disc in DTS format.
connecting & setting up Connecting to AV 3 IN, DV input jack This allows you to connect your HDD & DVD RECORDER to other external devices and view or record their outputs. ~ Case 1 : Connecting a VCR, Set-Top Box(STB), DVD player or Camcorder to the AV 3 IN jacks ~ Case 2 : Connecting a DV Device to the DV IN jack Case 1 : Connecting a VCR, Set-Top Box(STB), DVD player or Camcorder to the AV 3 IN jacks Connecting a VCR or external device to AV 3 IN jacks of the HDD & DVD RECORDER.
Case 2 : Connecting a Camcorder to the DV IN jack If your digital camcorder has a DV output jack, connect it to the DV input jack of your HDD & DVD RECORDER. connecting & setting up Camcorder M ` If the input is not selected automatically, use INPUT SEL. button to select proper input. Connecting to USB Devices This allows you to connect your HDD & DVD RECORDER to USB devices. Connecting a USB memory, MP3 player, Digital Camera to the USB HOST.
system setup On-Screen Menu Navigation The on-screen menus allow you to enable or disable various functions on your HDD & DVD RECORDER. Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus. 1. ▲▼, ◀▶ buttons Press these buttons on the remote control to move the selection bar ▲▼, ◀▶ to cycle through the menu options. . OK button Press this button on the remote control to confirm any new settings. .
. Auto channel scan will be started. ~ The number of stations automatically stored by the HDD & DVD RECORDER depends on the number of stations that it has found. . After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. Auto channel scan completed successfully. Press the [OK] button to auto clock set. OK . Wait until current date and time are displayed automatically.
system setup Setting the Clock This menu is used to set the current time. You need to set the time to use timer recording. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the OK or ▶ button. . Press the ▲▼ buttons to select System, then press the OK or ▶ button. . Press the ▲▼ buttons to select Clock Set, then press the OK or ▶ button. Press the ▲▼◀▶ buttons to input Month, Day, Year, Hour or Minute.
. Press the ▲▼ buttons to select Auto Scanning, then press the OK or ▶ button. The message “Your data will be lost. Press [OK] to continue, [RETURN] to exit.” is displayed. . Press the OK button, then press the ▲▼◀▶ buttons to select your Country. ~ The HDD & DVD RECORDER searches for the stations according to a preset preference list corresponding to the country that you have selected.
system setup Setting up the Language Options If you set the language options, in advance, they will come up automatically every time you watch a movie. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the OK or ▶ button. . Press the ▲▼ buttons to select Language, then press the OK or ▶ button. Language setup menu will be displayed. . Press the ▲▼ buttons to select the desired language option, press the OK or ▶ button.
Power Save Setting ~ On: If it is set to On and you turn off the HDD & DVD recorder, the recorder enters the Power Save and the front panel display goes off. ~ Off : Does not set to Power Save. Normally select OFF mode.
system setup DivX(R) Registration Please use the Registration code to register this HDD & DVD RECORDER with the DivX(R) Video On Demand format. For more information, visit www.divx.com/vod HDD & DVD RECORDER HDD System Clock Set Library DivX(R) Video OnAuto Demand Power Off : Off Timer Record Anynet+ (HDMI Your registration codeCEC) is: XXXXXXXX: On Disc Manager Registration To learnDivX(R) more visit www.divx.
Setting up the Audio Options You can connect the HDD & DVD RECORDER to an external amp or Home theatre. Allows you to setup the Audio device and sound status depending on the audio system in use. You can also set NICAM mode. . Press the ▲▼ buttons to select Setup, then press the OK or ▶ button. . Press the ▲▼ buttons to select Audio, then press the OK or ▶ button. . Press the ▲▼ buttons to select the desired audio option, then press the OK or ▶ button. .
system setup DRC This is only active when a Dolby Digital signal is detected. ~ On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. ~ Off : You can enjoy the movie with the standard Dynamic Range.
Setting up the Video Options This function allows you to setup the video setting. This function depends on disc type. It may not work for some disc types. . Press the ▲▼ buttons to select Setup, then press the OK or ▶ button. . Press the ▲▼ buttons to select Video, then press the OK or ▶ button. Video setup menu will be displayed. . Press the ▲▼ buttons to select the desired video option, then press the OK or ▶ button.
system setup Video Output You can enjoy high quality image through RGB or Component video connections. RGB video output is available connecting scart jack(AV1) and component video output is available connecting component(Y, PB, PR) jack. Only one of these signals can be selected at one time. ~ Component ~ RGB In Component mode, you can set video output to Progressive or Interlace.
BD Wise (Only Samsung products) BD Wise is Samsung’s latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically. HDD & DVD RECORDER HDD Library Timer Record Disc Manager ~ On : The original resolution of the DVD disc will be output to the TV directly. ~ Off : The output resolution will be fixed according to the Resolution previously set, regardless of the resolution of the disc.
system setup Setting up the Parental Lock Z The Parental Lock function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the OK or ▶ button. . Press the ▲▼ buttons to select Parental Lock, then press the OK or ▶ button.
Setting up the Recording Options Automatic Chapter Creator CVKL (V-mode) A DVD-Video consists of ‘Titles’ and ‘Chapters’. When you record one programme, it makes one Title. If you use this function, the Title will be divided into Chapters. . Press the ▲▼ buttons to select Recording, then press the OK or ▶ button. HDD & DVD RECORDER DVD-RW(V) Library Timer Record Disc Manager . Press the ▲▼ buttons to select Chapter Creator, then press the OK or ▶ button. .
system setup EZ Record CVKL (V-mode) This function allows you to Initialise and Finalise a disc automatically. 1. Press the ▲▼ buttons to select EZ Record, then press the OK or ▶ button. . Press the ▲▼ buttons to select On, then press the OK or ▶ button. Press the EXIT ( ) button to exit the menu. . Insert a disc. If the disc is new, it will initialise automatically.
playback This section introduces basic functions of playback and playback by disc type. Read the following information before playing a disc. Region code (DVD-Video only) 2 ALL Logos of Discs that can be played STEREO CREATOR Dolby Digital Stereo DTS PAL broadcast system in U.K, France, Germany, etc. Digital Audio DivX MP3 Disc types that can be played Disc Types DVD-VIDEO Disc Logo content Recorded content Disc Shape Max. Playing Time Single sided(12cm) 240 min.
playback Disc Types Disc Logo content Recorded content Disc Shape Max. Playing Time Single Layer(12cm) 2 hrs. (SP: Standard Quality) (4.7GB) 4 hrs. (LP: Long Playback) 1 hr. (XP: Excellent Quality) DVD-RAM 6 or 8 hrs. (EP: Extended) AUDIO VIDEO 2 hr. (XP: Excellent Quality) Dual Layer(12cm) (9.4GB) 4 hrs. (SP: Standard Quality) 8 hrs. (LP: Long Playback) 12 or 16 hrs. (EP: Extended) 1 hr. (XP: Excellent Quality) DVD-RW AUDIO VIDEO 12cm (4.7GB) 2 hrs. (SP: Standard Quality) 4 hrs.
Discs that cannot be played DVD-Video with a region number other than “2” or “ALL” 3.9 GB DVD-R Disc for Authoring. DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard A DVD±R/DVD-RW(V) disc which has been recorded and not finalised in a different manufacturer’s recorder. ~ DVD-ROM/PD/MV-Disc, etc ~ CVD/CD-ROM/CDV/CD-G/CD-I ~ ~ ~ ~ ` This HDD & DVD RECORDER can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
playback Using the Disc Menu & Title Menu Some type of discs contain a dedicated menu system that allows you to select special functions for title, chapter, audio track, subtitle, film preview, information on characters, etc. For DVD-VIDEO Disc Z ~ Disc Menu : Press the DISC MENU button to enter the disc menu of the disc. ~ Move to the setup menu related to playback operation. ~ You can select audio language and subtitle etc. provided by the disc.
Skipping Chapters, Titles or Markers SZXCVBKL During play, press the SKIP ( ) buttons on the remote control. Slow Motion Play SZXCVKLD In pause mode, press the SEARCH ( ) buttons on the remote control. ~ If you press the SEARCH ( ) button, * 1/2 * 1/4 * 1/8 ~ If you press the SEARCH ( ) button, & 1/2 & 1/4 & 1/8 ~ To return to normal speed playback, press the PLAY ( ) button. Press and hold the SEARCH ( ) buttons during pause, the disc will play slowly at 1/4 speed.
playback Using the INFO button The INFO function allows you to easily search for a desired scene by accessing title, chapter, or time. You can also change the subtitle and audio settings and set some features including Angle, Repeat, and Zoom. Moving to a scene directly using the INFO SZXCVKLD If you want to move to a certain title, chapter or time, use this function. 1. Press the INFO button during playback. . Press the ▲▼ buttons to select Search, then press the OK or ▶ button. .
Selecting the Soundtracks & Audio Channels SZXCKLD Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV programmes. You can also operate this function by pressing the AUDIO button on the remote control. 1. Press the INFO button during playback. playback . Press the ▲▼ buttons to select Audio. . Press the ◀▶ buttons to select the desired soundtracks or audio channel. M ` Soundtracks or Audio channel may be different because they are disc-specific.
playback Repeat A-B SZXCVKL 1. Press the INFO button during playback. Repeat . Press the ▲▼ buttons to select Repeat. A-B > . Press the ◀▶ buttons to select A-B, then press the OK button. . Press the OK button at the point where you want the repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts.
Using Markers SXC (VR mode) Set marks at scenes you want to see again so that you can start playback from the marked position. Setting Markers 1. Press the MARKER button during playback. Marker 01 02 -- -- -- -- -- -- -- -- N:2 . Press the ▶ button to move to the next position. . Press the OK button again when the desired scene appears. ~ The number 02 is displayed and the scene is memorized.
playback Using the Bookmarks ZCVKL (V mode) Setting Bookmarks 1. Press the MARKER button during playback. Bookmark . Press the OK button when the desired scene appears. ~ The number 1 is displayed and the scene is memorized. 1 2 - - - - - - - -- . Press the ▶ button to move to the next position. . Press the OK button again when the desired scene appears. The number 2 is displayed and the scene is memorized. ~ Repeat above to bookmark other positions. ~ You can bookmark up to 10 scenes.
Playing an Audio CD/MP3 Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback 2 3 2 5 5 9 6 10 11 7 8 REPEAT 1 SKIP ( page. ) button : Moves to the previous or next 2 Press the SEARCH ( ) buttons : Fast Play (X 2, X 4, X 8) (Audio CD only) 3 STOP ( 4 PAUSE ( 5 PLAY ( 6 ▲▼ : Selects a track (song). 7 RED(A) button : • Creates a playlist or go to playlist. • Select All : MP3, CD-DA • Copy : MP3 • CD Import : Audio CD 8 GREEN(B) button : Selects the sort order.
playback Playing an MP3 Disc 1. Insert an MP3 disc into the disc tray. ~ The menu is displayed . Press the ▲▼ buttons to select Library, then press the OK or + button. . Press the ▲▼ buttons to select Music, then press the OK or + button. . Press the ▲▼ buttons to select the track you want to hear, and then press the OK button. MP3 Screen Elements ➀ CD Q Song 1.mp3 Music List 1/9 No. Title Y ROOT ➁ ➂ ➃ @▶# 00:02:22 9 Song 1.mp3 E ROOT Edit Sort [/] Previous/Next Page Q Song 1.mp3 3.
CD Import o 1. Press the RED(A) button during the Music List playback. . Press the ▲▼ buttons to select CD Import, then press the OK or + button. . Press the ▶▲▼ buttons to select the target media,then press the OK button. ~ You can create a new folder by pressing the GREEN(B) button. . Press the RED(A) button to select Start Copy. The message “Number of file : x” is displayed. . Press the ◄▶ buttons to select Start, then press the OK button. File copy begins.
playback Go To Playlist oA 1. Press the RED(A) button during the Music List playback. . Press the ▲▼ buttons to select Go To Playlist, then press the OK or ▶ button. CD Playlist � � No. Title Length Y PLAYLIST E PLAYLIST01 . Press the ▲▼ buttons to select the desired playlist folder, then press the OK button. The selected tracks are played automatically. ( @ ▶ # ) 00:02:22 Y PLAYLIST mMove sSelect a Check eExit Delete the Playlist oA 1.
Go To Music List oA 1. Press the BLUE(D) button during the Playlist playback. The Music List will be displayed. CD Q TRACK04 Playlist 1/4 � No. Title Length Y PLAYLIST01 R TRACK04 4:03 002 TRACK02 3:57 ( @ ▶ # ) 00:02:22 003 TRACK06 5:08 I TRACK04 � PLAYLIST01 004 TRACK01 4:19 New Playlist Music List eExit Using the Sort A When you need to change the Sort order of Music List, you can change it simply. 1. While the list menu is displayed, press the GREEN(B) button to select Sort. .
playback Viewing a Picture G 1. Insert a JPEG disc into the disc tray. ~ The menu is displayed . Press the ▲▼ buttons to select Library, then press the OK or ▶ button. . Press the ▲▼ buttons to select Photo, then press the OK or ▶ button. ~ To see the next 8 pictures, press the SKIP ( ) button. ~ To see the previous 8 pictures, press the SKIP( ) button. CD Image 1.jpg Photo List 1/17 ROOT Image 1.jpg Image 10.jpg Image 11.jpg Image 13.jpg Image 14.jpg Image 15.jpg Image 16.
Zoom To setup, follow steps 1 to 4 in page 64. 5-1. Press the YELLOW(C) button to select Zoom. . Each time the OK button is pressed, the picture is enlarged up to 4x (four times the normal size). ➞ X2 ➞ X4 ➞ X2 ➞ Normal ~ You can go to Photo List by pressing YELLOW(C) button. playback ❖ To stop the Zoom Press the GREEN(B), STOP ( ) or RETURN button. Go To Photo List To setup, follow steps 1 to 4 in page 64. 5-1. Press the RETURN button to go to Photo List.
playback Playing a DivX N Using the MENU button 1. Insert a DivX disc into the disc tray. ~ The menu is displayed CD Movie_01.avi DivX List 1/1 No. . Press the ▲▼ buttons to select Library, then press the OK or ▶ button. . Press the ▲▼ buttons to select DivX, then press the OK or ▶ button. . Press the ▲▼ buttons to select the avi file (DivX), then press the OK or PLAY ( ) button. Title Size Y ROOT 001 Movie_01.avi 162.8MB 3 DivX E ROOT Edit Sort Subtitle Enc. Contents a Check eExit .
Western Afrikaans, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German, Icelandic, Indonesian, Italian, Malay, Norwegian, Portuguese, Spanish, Swahili, Swedish Central English, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian(Latin), Slovak, Slovenian Greek English, Greek Cyrillic English, Azeri, Belarusian, Bulgarian, Kazakh, Macedonian, Russian, Serbian, Tatar, Ukrainian, Uzbek ` If the subtitle language is displayed in broken fonts, change DivX Subtitle to th
recording This section shows various HDD & DVD Recording methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. Recordable Discs This HDD & DVD RECORDER can record on the following discs. HDD DVD-RAM DVD-RW DVD-R DVD+RW DVD+R ~ DVD-RAMs and DVD±RWs are rewritable. ~ DVD±Rs are non-rewritable.
M ` Finalise - This closes the DVD-RW/±R so no additional recording can be done. ` Unfinalise - This allows additional recording on a DVD-RW disc originally recorded on the HDD & DVD RECORDER. - A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalised. - A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised. - A DVD±R disc cannot be unfinalised. When you insert an unused disc, the following message appears.
recording Recording Mode Select one of four recording modes by pressing the REC MODE button repeatedly while the unit is in Stop mode for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording.
~ DVD-HR777 Recording Times Recording Mode XP (high quality mode) SP (standard quality mode) LP (long recording mode) FR (Flexible Recording) M DVD-RAM/±RW/±R Approx. 68 hours Approx. 1 hour about 8.5 Mbps Approx. 135 hours Approx. 2 hours about 4.5 Mbps Approx. 270 hours Approx. 4 hours about 2 Mbps Approx. 405 hours Approx. 6 hours/ about 1.6 Mbps Approx. 534 hours Approx. 8 hours/ about 1.2 Mbps Approx. 68 hours ~ 534 hours Approx.
recording Recording immediately Before you start SXCVKL 1. Check that the disc has enough available space for the recording. . Press the HDD or DVD button. If you select DVD, Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display. Recording the current TV programme you are watching 1. Press the PROG ( ) or number buttons to select the current programme you want to record.
To pause recording ~ ~ ~ ~ Press the REC PAUSE button to pause a recording in progress. Press the REC PAUSE button again during pause to resume recording. You can switch channels by pressing the PROG ( ) buttons while recording pauses. If you select DV mode during rec pause, recording will be stopped. If you change the input source during rec pause in DV mode , recording will be stopped. To stop recording M ` You can not change the recording mode while recording.
recording To stop recording Press the STOP ( ) button to stop or finish a recording in progress. ~ When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a moment” is displayed. M ` To display playback related icons on the screen, press any direction button on the remote control. Making a One Touch Recording (OTR) SXCVKL You can set the HDD & DVD RECORDER to record in 30-minute increments up to 8 hours by pressing the REC button. 1. Press the HDD or DVD button.
Simultaneous Recording and Playback S You can play back from the beginning of the programme you are currently recording. You can watch the previous title list while recording a programme. Using the PLAY ( ) button HDD ▶ Play recording 1. With the unit in recording mode, press the PLAY ( ) button. It plays back the title that you are currently recording from the beginning. Playback is not available for 10 seconds from the start of recording.
recording Time Shift function as a live signal S This function replays recordings as a live signal. If you are interrupted while watching a TV programme, simply press the TIME SHIFT button, and the HDD & DVD RECORDER immediately starts recording the programme. Time Shift >CHANGE On sSELECT Using the Time Shift function 1. Press the TIME SHIFT button on the remote control. The Time Shift menu is displayed. . Press the ▲▼ button to select On, then press the OK button. .
Making a Timer Recording SXCVKL 1. Check if the antenna cable is connected. 2. Check the remaining time of the disc. 3. Check if the date and time are correct. Make sure the Clock (Setup-Clock Set) is set before you proceed with a timer recording. (See page 36) 1. With the unit in Stop mode, press the TIMER button. . Press the ▲▼ buttons to select the Scheduled List, then press the OK or ▶ button. HDD & DVD RECORDER HDD Library Timer Record . Press the OK button to select Add a list. .
recording ~ TITLE : To label the title name, press the RED(A) button. Title renaming screen appears. Follow steps 4 and 5 of “Renaming (Labelling) a Title” on pages 81~82. . After selecting the set up value for each mode, press the OK button to select Save. ~ ’ will appear on the front panel. It means that a timer recording is registered. If the timer settings overlap; The programmes are recorded in order of priority.
Deleting a Scheduled List SXCVKL Follow these directions to delete an entry from the Scheduled List. To setup, follow steps 1 to 2 in “Making a Timer Recording” on page 77. . Press the ◀▶ buttons to select Yes, then press the OK button. ~ The selected entry will be deleted from the list. . Press the EXIT ( ) button after finishing the operation. The Scheduled List screen will disappear. Go To Recorded List SXCVKL You can view a list of the programmes that have been recorded.
recording Clear Recorded List Clears all Recorded List at once. 3-1. Press the GREEN(B) button. HDD . Press the ◀▶ buttons to select Yes, then press the OK button. No.
editing Basic Editing (Title List) Playing the Title SXCVKL Follow these instructions to play back a scene from the Title List. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. . Press the ▲▼ buttons to select an entry you want to play from Title List, then press the OK or PLAY ( ) button. The selected entry (title) will be played back. . To stop title play, press the STOP ( ) button. The screen returns to the Title List screen.
editing . Press the BLUE(D) button to select Save. The changed title name is displayed on the title item of the selected entry. HDD Rename Sports(A1) Back Space mMove Space sSelect Clear rReturn Save eExit Locking (Protecting) a Title SXCVKL Follow these instructions to lock an entry to protect it from accidental editing. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. .
Deleting a Title SXCVKL Follow these instructions to delete an entry from the Title List. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. . Press the RED(A) button to select Edit. Edit menu is displayed. Title List 2/3 No.
editing Splitting a Section of a Title (Split) SK Follow these instructions to split a section of a Title List entry into two titles. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. . Press the ▲▼ buttons to select an entry you want to Split from the Title List, then press the RED(A) button. The Edit menu is displayed. . Press the ▲▼ buttons to select Split, then press the OK or ▶ button.
. Press the OK button at the starting point. The image and starting point time is displayed in the section deletion starting point window. ~ Select the start and end points of the section you want to delete using the playback related buttons. ~ Playback related buttons : (PLAY ( ), PAUSE ( ), SEARCH ( )). . Press the OK button at the end point. The image and end point time is displayed in the Section deletion ending point window.
editing Navigation Menu Time Navigation SXC (VR mode) Using this function, you can search scene minute-by-minute from the recorded title list. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. . Press the ▲▼ buttons to select an entry you want to play from Title List, then press the YELLOW(C) button. . Press the ▲▼ buttons to select Time Navigation, then press the OK or ▶ button. .
Select Contents SXCVKL 1. Press the BLUE(D) button to select Contents. . Press the ▲▼ buttons to select the contents you want to move, then Press the OK or ▶ button. M ` This function is possible only when the disc contains the selected contents. HDD JAN/01/2009 17:30 PR1 Title List 1/3 No.
editing Playing Entries in the Playlist SXC (VR mode) Follow these instructions to play the playlist entries. N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. . Press the ▲▼ buttons to select the playlist you want to play, then press the OK or PLAY ( ) button. . Press the STOP ( ) button to stop playing. The screen returns to the Playlist screen. HDD JAN/02/2009 13:47 Playlist 1/3 No.
Editing a Scene for the Playlist SXC (VR mode) Follow these instructions to edit scenes for a playlist. N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. . Press the ▲▼ buttons to select Edit Playlist, then press the OK or ▶ button. The Edit Playlist screen is displayed. Playlist 1/3 No.
editing Moving a Scene (Changing the Position of a Scene) To setup, follow steps 1 to 3 on page 89. 4-1. Press the ▲▼◀▶ buttons to select the scene you want to move (change the position), then press the GREEN(B) button. ~ A yellow selection window is displayed on the scene to be moved. . Press the ▲▼◀▶ buttons to select the position to which you want to move the selected scene, then select the OK button. M HDD JAN/02/2009 13:47 Edit Playlist Scene No.
Deleting a Playlist Entry from the Playlist N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. . Press the RED(A) button to select Edit. Edit menu is displayed. . Press the ▲▼ buttons to select Delete, then press the OK or ▶ button. ~ You will be prompted with the delete confirmation message “Do you want to delete?”. . Press the ◀▶ buttons to select Yes, then press the OK button.
editing COPYING FROM HDD TO DVD OR VICE-VERSA About the Copy Screen 1 HDD Selected Items: Copy Available : 4099MB Source : HDD 2 001 JAN/01/2009 1 4 ; DVD 002 JAN/01/2009 1 3 MPEG2 003 JAN/01/2009 1 0 SP � 47MB Start Copy Sort Selection a Check 5 3 To : DVD 6 eExit 7 1 Total size and number of selected titles for copying 2 Title to be copied 3 This shows available disc space 4 The location where the copied files are stored 5 Copy start button 6 Sort button (Date, Name, Length,
. Press the RED(A) button to select Start Copy. ~ The title to be copied is not displayed on the screen, and copying begins while the currently broadcasting programme is displayed on the screen. ~ Press the INFO button to view the copy processing bar. If you press INFO button again, copy processing bar will disappear. ~ To cancel the copying in progress, press the RED(A) button. 21% Cancel b Bar Type c Channel . After a successful copy, “The title is successfully copied” message is displayed.
editing . Press the ▲▼ buttons to select the MP3, Photo or DivX file you want to copy, then press the MARKER button until a checkmark appears. ~ If you don’t want to copy a certain one of the checked entries, simply select that entry and press the MARKER button to deselect it until the checkmark disappears. . Press the ▶▲▼ buttons to select the target media,then press the OK button. ~ You can create a new folder by pressing the GREEN(B) button. . Press the RED(A) button to select Start Copy.
M ` Pressing the EXIT ( ` ` ` ` CD Selected Items: 76.8MB (2) Source : DVD Copying... Copy Available : 236715MB To : Y :ROOT Free space 236615 MB Number of E file MP3 : 1 /(1)24 File Name :E 01.MP3 ###(2)## 1.mp3 � MP3 � 36.6MB Start Copy ROOT E MP3 (3) 33% New Folder eExit editing ` ) button during folder copying will cancel the folder copying after the current file is copied. You can copy up to 500 files or 500 sub folders to one folder.
editing Disc Manager Editing the Disc Name XCVKL Follow these instructions to give a name to a disc. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Disc Manager, then press the OK or ▶ button. . Press the ◀▶ buttons to select Rename, then press the OK button. The Rename screen is displayed. . Select the desired characters using the ▲▼◀▶ buttons, then press the OK button. . Press the BLUE(D) button to select Save. A disc name is given to the disc.
Delete All Title Lists XCVKL 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Disc Manager, then press the OK or ▶ button. Disc Manager Disc Name DVD-VR Used Space 00:17 ( 0.52 GB) Available Space 01:54 SP ( 3.85 GB) Disc Protection Info Not Protected Current Rec. Mode VR-Mode Rename
editing Formatting a Disc SXCK Use these instructions to format a disc. The disc protect should also be cleared. 1. With the unit in Stop mode, press the MENU button. HDD . Press the ▲▼ buttons to select Disc Manager, then press the OK or ▶ button. Disc Manager Used Space 000:39 ( 1.68 GB) Available Space 065:19 XP ( 231.01 GB) . Press the ◀▶ buttons to select Format, then press the OK button.
M ` Once a disc is finalised, you cannot delete entries from the record list. ` After being finalised, the DVD±R/-RW(video mode) operates in the same manner as a DVD-Video. ` Depending on the disc type, the displayed screen may be different. ` Finalising time may be different depending on the amount of data recorded on the disc. ` Data on the disc will be damaged if the recorder is powered off during finalisation process. ` You can finalise the disc automatically using EZ Record.
reference Troubleshooting If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service centre. PROBLEM EXPLANATION/SOLUTION The input is displayed for a while when the power is turned on. The HDD & DVD RECORDER requires some time to initialize and the input will be displayed for approx. 10 seconds after it is turned on. Cannot record TV programmes. • Check whether the power cord is securely plugged into the power outlet.
EXPLANATION/SOLUTION No audio output. Check whether you have selected the correct digital output options in the Audio Output Options menu. (See pages 41~42) Timer lamp flickers • Check there is enough space in the disc or HDD for recording. • Check whether the current disc is recordable or not. Make sure to check before the start time of recording. Timer recording does not work properly. • Re-check the recording time and the end time settings again.
appendix Specifications General Input Power requirements AC 220~240 V, 50 Hz Power consumption 28 Watts / 1 Watts (Power save ) Weight 3.8 Kg Dimensions 420 mm(W) x 300 mm(D) x 55 mm(H) Operating temp. +5 °C to +35 °C Other conditions Keep level when operating. Less than 75% operating humidity Video Composite Video : 1.0 V p-p at 75Ω load, sync negative Audio Max.
This product uses parts of the software from the Independent JPEG Group. This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com. GPL software: Linux Kernel, Busybox, Binutilis LGPL software: Glibc The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
.GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.