User Manual

English 


Press the  button to pause a recording in progress.
Press the  button again during pause to resume recording.
You can switch channels by pressing the  ( ) buttons while recording pauses.
If you select DV mode during rec pause, recording will be stopped.
If you change the input source during rec pause in DV mode , recording will be stopped.

Press the  ( ) button to stop or nish a recording in progress.
When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a
moment” is displayed.
You can not change the recording mode while recording.
Recording will stop automatically if there is no free space left for recording.
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc.
Up to 999 titles can be registered on the HDD.
HDD recording is available for up to 24 hours, and when recording for 24 hours, 3 titles will be recorded with each
being 8 hours in length.
Recording will stop automatically if a copy protected image is selected.
DVD-RAM/±RW discs must be formatted before starting to record. Most new discs are sold unformatted.
Do not use DVD-R authoring discs with this unit.

SXCVKL
You may control the Camcorder using the IEEE1394 (DV) interface.
Connect the DV output jack of your camcorder to the DV input jack
on the front of your HDD & DVD RECORDER using a DV cable.
Press the  or  button.
If you select DVD, press the  button and place a
recordable disc on the disc tray. Press the  button to
close the disc tray. Wait until  disappears from the front panel
display.
Press the  button repeatedly to select the recording
speed(quality).
Press the  button to select .
If the input is set to DV, a playback/record menu that enables
camcorder control appears on the top of the screen.
Select the Play (
) icon on the upper part of the screen to playback
the camcorder and nd the starting position to copy.
To start recording, use the
◀▶
buttons to select Record (
) icon
in the top side of the screen, then press the  button.
You can press the  button of the remote control to start recording.
M






Record Mode SP(35:12)
DV
<
MOVE
r
RETURN
The DV device is connected