Manual

,,&
I ENGLISH ]
Troubleshooting
Symptom Check
No picture • Check that the LCD display is turned on.
No sound • Check that the display panel is open. If it is closed, audio will not be output to the speakers.
• Check the volume setting. If set to zero, turn up volume level
............................................................
Speakers cannot be used with the headphones.
No picture and sound • Check that the DVD player is in the DVD mode and not in the INPUT mode.
Distorted video or sound • Use a disc without scratches or dents.
While in the input mode, • Check that the video or audio cable is securely connected.
no picture is output from ................................................................................................................................................................................................................
• Make sure the S-Video cable is used for output only.
the external component ................................................................................................................................................................................................................
to the DVD player • Check that the DVD player is in the iNPUT mode and not in the DVD mode.
IENGLISH]
Troubleshooting
DVD
Battery pack
operation
Battery pack
operation
Symptom Check
Video does not appear with a • Check that the TV is set to VIDEO or AV.
external component connected to .........................................................................................................................................................................
the DVD player • Check that the video or audio cable is securely connected.
Dolby Digital audio volume is • Change the "Dynamic Comp." setting to "On". This will turn up the comparatively low
too low volume level of Dolby Digital, which provides the most wide, dynamic sound range.
Battery pack won't charge • Check that the DVD player is turned off.
You cannot charge the battery pack with the player turned on.
.........................................................................................................................................................................
• A hot battery pack may take longer to charge.
Wait until the battery pack is sufficiently cooled down.
Power does not turn on • Replace with a fully charged battery pack or use the AC adapter.
Power charge lamp does • Replace with a fully charged battery pack or use the AC adapter.
not light (Battery pack won't If the DVD player is overheated and the battery pack's internal temperature goes up
charge) to a certain level, you will not be able to charge the battery pack.
In this occurs, remove the battery pack. After the battery pack has sufficiently
cooled down, charging will begin automatically.
• Check that the temperature is within the range of 50°F~86°R
• Check that the DC cord of the AC adapter is plugged in correctly.
Power charge lamp quickly • Remove the DC cord from the battery pack and then re-plug.
flashes Green If the battery pack is installed, remove the DC cord from the battery pack before
performing above procedure.
• Recharge a different power pack. If the same symptom occurs, your
AC adapter may be defective, if the second battery pack charges without any
problem, your first battery pack may be defective or needs battery replacement.