User manual

Setting Up the Audio Options

With the unit in Stop mode, press the SETUP button.

Use the UP/DOWN buttons to select AUDIO OPTIONS.

Then press the ENTER button.

Use the UP/DOWN buttons to select the desired item.

Then press the LEFT/RIGHT buttons.

Digital Output

1. PCM : Converts to PCM(2CH) 48kHz audio.

Select PCM when using the Analog

Audio Outputs.

2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).

Select Bitstream when using the Digital

Audio Output.

EE : Be sure to select the correct Digital Output or

no audio will be heard.

DTS

1. On : Outputs DTS Bitstream via digital output only.

Select DTS when connecting to a DTS Decoder.

2. Off : Doesn’t output digital signal.

Dynamic Compression

1. On : To select dynamic compression.

2. Off : To select the standard range.

2X Scan Audio

1. On : Turns 2X audio on.

2. Off : Turns 2X audio off.

Though 2X Scan Audio is ON in the SETUP MENU,

no sound will be heard on discs which are recorded with

LPCM, DTS or MPEG-2 Audio.

NOTE

•

How to make the SETUP MENU disappear or return to menu screen during set up;

Press RETURN button.

• Certain audio features of this product manufactured under a license from Desper Products, Inc.

Spatializer

and circle-in-square device are trademarks owned by Desper Products, Inc.

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of

reserved.

• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

CHANGING

SETUP MENU