Instruction Manual DVD-R150 DVD-R155 www.samsung.com/hk English 01274F-R150,155-XSH-ENG.
Getting Started Getting Started Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT NOTE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used.
▌Important Safety Instructions Read these operating instructions carefully before using the DVD Recorder. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
Getting Started ▌Disc Storage Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment. • Do not keep under direct sunlight. • Keep in a cool ventilated area. • Store vertically. • Keep in a clean protection jacket. • If you move your DVD recorder suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback.
DVD+RW Disc Playback and Recording • With DVD+RW discs, there is no difference between DVD-Video format (Video mode) and DVD-Video Recording format (VR mode). • You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. • Finalising is generally unnecessary when using a DVD+RW disc. DVD-RAM Disc Playback and Recording • For cartridge type DVD-RAM discs, remove the cartridge and use the disc only. • Ensure that the recording mode is set to VR mode.
Getting Started Contents Getting Started System Setup ■ Warning ........................................................................................... 2 ■ On-Screen Menu Navigation ................................................... 21 ■ Precaution ...................................................................................... 3 Important Safety Instructions ................................................. 3 Handling Cautions ................................................................
■ Deleting the Scheduled Record List...................................... 41 ■ EZ REC MODE ................................................................................ 41 Playback ■ Region code (DVD-Video only) ............................................... 42 ■ Logos of Discs that can be played ......................................... 42 ■ Disc types that can be played ................................................. 42 Discs that cannot be played ..................................................
Getting Started High quality progressive scan General Features DVD-R150 This unit allows you to record and playback high quality digital images on DVD-RAM/DVD-RW/DVD-R discs. You can record and edit digital images on DVD-RAM/DVD-RW/DVD-R discs. (DVD+RW/DVD+R discs can be played, but cannot be recorded.) Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry provides the highest image playback and recording quality.
How to use the DVD Recorder Make sure to check the following terms before reading the user’s manual. This DVD Recorder can record on the following types of discs. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. If you want to save recording without any change, choose a non-rewritable DVD±R.
Getting Started ▌Step 4 : Playing Unpacking You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections called titles, and sub sections called chapters. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you finalise recording on DVD-R / DVD-RW discs in Video mode. You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu.
To determine whether your television is compatible, follow the instructions below.
Getting Started Description ▌Front Panel 10 11 12 10 1. STANDBY/ON Turns the DVD Recorder on and off. 7. DISPLAY Displays the playing status, title/chapter/ time, etc. 2. AV2 IN Connect external equipment. 8. PROG ( ) Select TV preset Channels. Same as PROG button on the remote control. 3. DV-IN Connects extermal digital equipment with a DV jack. (such as a camcorder) 4. DISC TRAY Opens to accept a disc. 5. P.SCAN Selects the progressive scan mode. 6. OPEN/CLOSE Opens and closes the disc tray. 9.
Getting Started ▌Rear Panel (DVD-R150) 1. RF IN / RF OUT Connects antenna cables. 2. DIGITAL AUDIO OUT(OPTICAL) Connects to an amplifier having a digital optical audio input jack. 3. DIGITAL AUDIO OUT(COAXIAL) Connects to an amplifier having a digital coaxial audio input jack. 4. AUDIO OUT Connects to the audio input df external equipment using audio cables. 5. VIDEO OUT(good video quality) Connects the input of external equipment using a Video cable. 6.
Getting Started ▌Tour of the Remote Control You can control certain functions of another manufacturer’s TV with this remote control. Control function buttons involve: STANDBY/ON, PROG / , TV VOL +/-, Direct Number buttons, TV MUTE, INPUT SEL. button. 8. TV VOL Button Volume adjustments. 26 27 28 29 1 16 17 4 5 6 7 8 9 10 10. MENU Button Brings up the DVD recorder’s setup menu. 11. OK/DIRECTION(▲▼◄ ►) Buttons 12. TITLE LIST/DISC MENU Button Use this to enter the View Recording list/Disc menu.
Connecting & Setting Up Connecting the DVD Recorder 1. Disconnect the aerial cable from your TV and connect it to on the rear panel of the DVD Recorder. There are several ways to output video signal. Select one of the following video connecting that best suits you below. • Case 1 : Connecting to a Video (Composite) output jack • Case 2 : Connecting to an S-Video output jack • Case 3 : Component Video output jacks 2.
Connecting & Setting Up ▌ Case 1 : Connecting to a Video (Composite) output jack ▌Case 2 : Connecting to an S-Video output jack 1. Connect a video(yellow) cable between the VIDEO (yellow) OUT jack on DVD Recorder and VIDEO (yellow) INPUT jack on your TV (or AV amplifier). • You will enjoy regular quality images. 1. Connect an S-Video cable (not included) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO INPUT jack on your TV (or AV amplifier). 2.
▌Case 3 : Component Video output jacks 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y, PB, PR) jacks on DVD Recorder and COMPONENT IN (Y, PB, PR) jacks on your TV. 2. Connect audio cables (white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or AV amplifier). (See page 17~18) There are several ways to output audio signal . Select the audio connection that best suits you below.
▌Case 3 : Connecting to an AV amplifier with a digital output jack If your stereo amplifier only has AUDIO INPUT jacks (L and R), use the AUDIO OUT jacks. If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings.
■ Connecting HDMI/DVI to a TV (DVD-R155 only) If your TV has a HDMI/DVI input, connect HDMI/DVI cable to a TV. You will enjoy the best quality images and sounds. • Case 1 : Connecting to a TV with HDMI Jack • Case 2 : Connecting to a TV with DVI Jack Connecting & Setting Up ▌Case 1 : Connecting to a TV with HDMI Jack • Using the HDMI-HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of your TV.
▌Case 2: Connecting a Camcorder to the DV IN jack Connecting to AV2 IN, DV input jack If your digital camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder. Connecting & Setting Up This allows you to connect your DVD Recorder to other external devices and view or record their outputs.
System Setup On-Screen Menu Navigation DVD-Recorder Programme No Disc Programme Scheduled Record List ► Setup The on-screen menus allow you to enable or disable various functions on your DVD Recorder. Press the Menu button to open the on-screen menu and then, use the following buttons to navigate through the on screen menus. 1. EXIT Button Press this button to exit the on-screen menu. OK MOVE 2.
6. Auto Channel scan will be started. • The number of stations automatically stored by the DVD Recorder depends on the number of stations that it has found. Auto Channel Memory 17% Stop DVD-Recorder 7. Check the date and time. • if it is : Correct, press the OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds. • if it is : Incorrect, input correct Time, Date, Year using ▲▼◄ ► buttons or number buttons.
Presetting Channels with the Auto Setup function This feature allows you to manually set the DVD Recorder tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. Auto Channel Memory 17% 1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. Stop 3. Press the ▲▼ buttons to select Install, then press the OK or ► button. 4.
Setting up the Language Options Language DVD-Recorder No Disc Programme Audio : Original ► Setup Subtitle : Automatic ► Disc Menu : English ► On-Screen Menu : English ► DivX Subtitle ► MOVE OK : Western RETURN EXIT If you set the language options in advance, they will come up automatically every time you watch a movie. 1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3.
Setting up the System Options System DVD-Recorder No Disc Programme EP Mode Time : 6 Hours ► Setup Chapter Creator : Off ► Quick Recording : Off ► This function allows you to setup the system setting. 1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select System, then press the OK or ► button. MOVE OK RETURN 4.
▌Anynet+(HDMI-CEC) (DVD-R155 only) DVD-Recorder System No Disc Programme EP Mode Time : 6 Hours ► Setup Chapter Creator : Off ► Quick Recording : Off ► Anynet+(HDMI-CEC) :Off On ► 1. With the unit in Stop mode/No Disc mode, press the MENU button on the remote control. On MOVE OK RETURN Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the DVD Recorder to a SAMSUNG TV using a HDMI Cable.
Setting up the Audio Options DVD-Recorder Audio No Disc Programme Digital Output : PCM Setup DTS : Off ► Dynamic Compression : Off ► NICAM ► ► : On You can connect the DVD Recorder to an external amp or Home Theatre. Allow you to setup the Audio device and sound status depending on the audio system in use. 1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. MOVE OK RETURN 3.
▌Dynamic Compression This is only active when a Dolby Digital signal is detected. DVD-Recorder Audio No Disc Programme Digital Output : PCM ► Setup DTS : Off ► Dynamic Compression :Off On :On On ► NICAM MOVE OK RETURN ► ▌NICAM EXIT DVD-Recorder Audio No Disc Programme Digital Output : PCM Setup DTS : Off ► Dynamic Compression : On ► :Off On On ► System Setup NICAM OK MOVE RETURN • Off : You can enjoy the movie with the standard Dynamic Range.
Progressive scan If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to enjoy. Setting up the Progressive scan 1. With the DVD Recorder in Stop mode, press the P.SCAN button on the front of the DVD Recorder. The message “Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].” will appear. 2. Press the ◄ ► buttons to select Yes, and then press the OK button. 3. Set your TV to Progressive input (using the TV remote control.
▌HDMI/DVI Resolution (DVD-R155 only) Video DVD-Recorder No Disc Programme TV Aspect Setup 3D Noise Reduction : Off ► HDMI/DVI Resolution : 576p 576P ► DivX(R) Registration 720p 1080i ► : 16:9 Wide ► This setting is used when the DVD Recorder is connected by HDMI or DVI with Display devices (TV, projector, etc). • 576p : 720 x 576 • 720p : 1280 x 720 • 1080i : 1920 x 1080 • Connect the DVD Recorder to your TV via HDMI or DVI cable. And set your TV's input to HDMI.
Setting up the Parental Control Parental Control DVD-Recorder No Disc Programme Password :Off Off ► On Setup The Parental Control function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. OK MOVE RETURN 3.
Recording This section shows various DVD recording methods. This DVD Recorder can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. Recordable discs This DVD Recorder can record on the following discs. ● DVD-R150 DVD-RAM DVD-RW DVD-R DVD-RW DVD-R ■ Finalise - This closes the DVD±R/-RW so no additional recording can be done.
Recording Formats DVD-RAM Since available functions differ depending on the disc type, select a disc that best fits your preferences; When you insert an unused disc, the following message appears Unformatted Disc Do you want to format this disc? Yes No • DVD-RAM : Use after formatting the disc. • DVD±RW/+R : Use after initialising the disc. In case of DVD-RW disc, you can change the mode. Refer to Fomatting a Disc on pages 65.
Recording Mode Select one of four recording modes by pressing the REC MODE button repeatedly while the DVD Recorder is in Stop mode for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function is selected only one mode in XP, SP, LP and EP modes and you can use this mode for timer recording.
Concerning Copy Control Signals TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never. If you want to record a copy-once type programme, use DVD-RAM/-RW with CPRM in VR Mode. Signal type Media DVD-RAM (Ver.2.0) DVD+RW DVD+R DVD-RW (Ver.1.1) DVD-RW (Ver.1.1) with CPRM VR mode Video mode DVD-R Copy-Free Copy-Once Copy-Never O O O O O* - - O O O O* - - Once “Copy Once” has been recorded, recording cannot be done anymore.
Recording immediately Record Mode XP (00:40) DVD-R155 only Before you start 1. Check that the disc has enough available space for the recording. Adjust the recording mode. 2. Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Recording : AV 1 3. Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display. ▌Recording the current TV programme you are watching 1.
■ You can not change the recording mode and the PROG while recording. ■ Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc. ■ Recording will stop automatically if there is no free space left for recording. ■ Recording will stop automatically if a copy protected image is selected. ■ DVD-RAM/DVD±RW/DVD+R discs must be formatted before starting to record. Most new discs are sold unformatted. ■ Do not use DVD-R authoring discs with this DVD Recorder.
■ You can not change the recording mode and input source while recording. ■ Recording will stop automatically if there is no free space left for recording. ■ Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc. ■ Recording will stop automatically if a copy protected image is selected. ■ DVD-RAM/DVD±RW/DVD+R discs must be formatted before starting to record. Most new discs are sold unformatted. ■ Do not use DVD-R authoring discs with this DVD Recorder.
Making a Timer Recording Programme DVD-Recorder DVD-RW(VR) Title List Scheduled Record List DVD-R155 only ► Playlist Before you start Disc Manager Programme Setup MOVE OK Scheduled Record List DVD-Recorder DVD-RW(VR) No. Source EXIT RETURN Current Time 12:05 Day Start End Speed Edit No. 01 Source Day Start End Speed PR 01 01 MON 12:05 14:05 SP Available Time 00:48 SP MOVE 1. Check the antenna cable is connected. 2. Check the remaining time of the disc. 3.
■ When you are recording at EP mode on a DVD-RW(V)/-R disc, it may not record the full 6 or 8 hours because the DVD Recorder uses the VBR(Variable Bit Rate) ENCODING system. For example, if you record a programme with a lot of action, it uses a higher bit rate which in turn consumes more disc memory. 4. Press the OK button. If the timer settings overlap The first programme has priority. After recording of the first programme is complete, the second programme starts being recorded. 5.
Deleting the Scheduled Record List Scheduled Record List DVD-Recorder Current Time 12:27 DVD-RW(VR) No. 01 02 03 Source Day Start End Speed Edit PR 01 SAT 01 15:07 14:07 SP CH No. 01 PR 01 SUN 01 12:08 14:08 SP CH / / to delete : : Do you want ’No.01’ ? ► ► DVD-R155 only Follow these directions to delete an entry from the timer record list. ► 1. With the DVD Recorder in Stop mode, press the TIMER button. Yes MOVE No OK 2. Press the OK or ► button. RETURN EXIT 3.
Playback This section introduces basic functions of playback and playback by disc type. Disc types that can be played Read the following information before playing a disc. Disc Types Region code (DVD-Video only) Both the DVD recorder and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this DVD Recorder is described on the rear panel of the DVD Recorder.
▌Discs that cannot be played • DVD-Video with a region number other than “3” or “ALL” • 5” 2.6 GB and 5.2 GB DVD-RAM • 3.9 GB DVD-R Disc for Authoring. • A DVD±R/DVD-RW(V) disc which has been recorded and not finalised in a different manufacturer's recorder. • DVD-ROM/PD/MV-Disc, etc. • Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I ■ Playback and/or recording may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed.
▌Using the Disc Menu & Title Menu Some discs contain a dedicated menu system that allow you to select special functions for the title, such as chapters, audio tracks, subtitles, film previews, information on characters, etc. For DVD-VIDEO discs Disc Menu : Press the DISC MENU button to enter the disc menu of the disc. • Move to the setup menu related to the playback operation. • You can select the audio languages and the subtitles provided by the disc.
■ No sound is heard during Scan(Search) mode except Fast 1 mode. ■ You cannot also hear during scanning MPEG4 in all mode. ■ For CD(CD-DA), you can hear sound during Scan mode. ■ The speed marked in this function may be different from the actual playback speed. Skipping Chapters or Tracks During playback, press the SKIP ( ) button on the remote control. • If you press the SKIP ( ) button, it moves to the beginning of the chapter or track or marker(DVD-RAM, DVD-RW(VR mode)).
Using the ANYKEY button The ANYKEY function allows you to easily search for a desired scene by accessing title, chapter or time. You can also change the subtitle and audio settings and set some features including Repeat, Angle, Zoom. ▌Moving to a desired scene directly If you want to move to a certain title, chapter or time, use this function. 1. Press the ANYKEY button during playback.
Selecting the Subtitle Language DVD-VIDEO Title 1/2 Chapter 1/28 Time 00:00:01 Subtitle ENG Audio ENG Repeat Off Angle 1/3 Zoom Off MOVE Subtitle languages may not work depending on the disc type. This is only available during playback. D 5.1CH 1. Press the ANYKEY button during playback. CHANGE 2. Press the ▲▼ buttons to select Subtitle, then press the ◄ ► buttons to select the desired subtitle language. ■ If the subtitles overlap, disable the caption function on your TV.
Zooming-In 1. Press the ANYKEY button during playback or pause. 2. Press the ▲▼ buttons to select Zoom, then press the OK button. ( ) will be displayed. 3. Press the ▲▼◄ ► buttons to move to the area you want to enlarge. 4. Press the OK button. normal size 2X 4X 2X normal size Using Bookmarks Bookmark 1 2 - - - - - - - -- (V mode) This feature lets you bookmark sections of a DVD-VIDEO or DVD±R/-RW (V mode), so you can quickly find them. ▌Setting Bookmarks MOVE PLAY CLEAR RETURN 1.
▌Clearing a bookmark Bookmark 1. Press the MARKER button during playback. 1 - - - - - - - - -- 2. Press the ◄ ► buttons to select a bookmarked scene. 3. Press the CANCEL button to delete the selected bookmark. MOVE OK RETURN Using the Markers Marker 01 02 -- -- -- -- -- -- -- -- N:2 (VR mode) ▌Setting Markers 1. Press the MARKER button during playback. MOVE PLAY CLEAR RETURN 2. Press the OK button when the desired scene appears. The number 01 is displayed and the scene is memorized. 3.
Playing back an Audio CD(CD-DA)/MP3 ▌Buttons on the Remote Control used for Audio CD (CD-DA)/MP3 playback 1. ▲▼ : Selects a track (song). 2. ► : Plays the selected track (song). 3. OK button: Plays the selected track (song). 4. SKIP( ) button: Plays the next track. 5. RETURN button: Moves to the folder to which the current song belongs. (MP3 only) 6. SKIP( ) button: Returns to the beginning of the current track when pressed during playback.
▌Playing back an MP3 Disc MP3 Music List SONG01 01/13 No. SONG01 4.0MB 01/26/2007 002 003 004 005 006 PLAY MODE MOVE ► 0:00:15 MP3 Title 1. Insert an MP3 Disc into the disc tray. ROOT SONG01 SONG02 SONG03 SONG04 SONG05 SONG06 OK 2. Press the ▲▼ buttons to select Disc Navigation, and then press the OK or ► button. 3. Press the ▲▼ buttons to select Music, then press the OK or ► button. The MP3 menu appears and the tracks(songs) are played automatically. RETURN EXIT 4.
▌Play Option Mode Music List CD TRACK 1 01/15 No. 0:00:20 TRACK 1 CDDA PLAY MODE Title TRACK 1 PLAY MODE 002 TRACK 2 Repeat : Off 003 TRACK 3 Play option : TRACK Normal4 004 005 TRACK 5 006 TRACK 6 007 TRACK 7 MOVE OK Length 0:03:50 0:04:00 0:03:49 0:03:47 0:04:29 0:03:44 0:03:44 RETURN EXIT 1. Press the ANYKEY button in Stop mode. The PLAY MODE window appears. 2. Press the ◄ ► buttons to select the desired item (Normal, Random, Intro or Playlist) in the Play option, then press the OK button.
5-1. If you press the PLAY button, the Slide Show Speed screen will appear. Press the ◄► buttons to set the slide show speed, then press the OK button. 5-2. Press the OK button with a picture selected in the Album screen. And select a display mode (Album screen, Slide show, Rotation or Zoom) using the ◄► buttons, then press the OK button.
Playing the Title List Title List DVD-RW(VR) APR/19/2007 1/6 No. APR/19/2007 12:00 PR12 APR/19/2007 SP MOVE Title 01 APR/19/2007 02 APR/19/2007 03 APR/20/2007 04 APR/20/2007 05 APR/21/2007 06 APR/21/2007 OK Length Edit 12:00 12:30 12:00 12:30 12:00 12:30 RETURN 00:00:21 00:00:03 00:00:15 00:00:16 00:06:32 00:08:16 ► ► ► ► ► ► EXIT DVD-R155 only Follow these instructions to play back a scene from the Title List. 1. Press the TITLE LIST button. The Title List screen is displayed. 2.
Editing This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. • Title List A title is a section of recorded video and audio. Title List shows a list to help you select a title. Since the title list consists of the information on stream that is actually recorded, if one title is deleted, that title cannot be played again.
▌Locking (Protecting) a Title Title List DVD-RW(VR) Sports (A1) 5/6 DVD-R155 only Follow these instructions to lock an entry to protect it from accidental deletion. Title Protection : Sports (A1) On APR/21/2007 Off 1. Press the TITLE LIST button. The Title List screen is displayed. SP MOVE OK EXIT RETURN Title List DVD-RW(VR) Sports (A1) 5/6 No.
▌Deleting a Section of a Title Edit Title List DVD-RW(VR) Title List No. 05 Start End (VR mode) Follow these instructions to delete a section of a Title List entry. 00:00:06 00:00:00 00:00:06 Start End MOVE Delete OK Return RETURN DVD-RW(VR) EXIT Edit Title List Title List No. 05 Start End 00:00:06 End MOVE Delete OK Return RETURN DVD-RW(VR) EXIT Edit Title List Title List No. 05 End Start Do you want to delete? (Deleted part will not be restored.
▌Editing a Chapter DVD+RW Chapter Edit Chapter : 1/1 Show 00:00:00 Add Delete Hidden OK MOVE Delete All Return EXIT RETURN DVD-R155 only DVD+RWs don't support the Auto Chapter Creator function. You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. 1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the ▲▼ buttons to select a title containing a chapter you want to edit, then press the OK or ► button. 3.
Hiding a chapter Chapter Edit DVD+RW Follow steps 1 to 3 in page 58 4. Select a chapter you want to hide using the playback related buttons ( , , , , , , ). Chapter : 2/4 Hidden 00:15:00 Add Delete MOVE Hidden OK Delete All Return RETURN EXIT 5. Press the ◄ ► buttons to select Hidden, and then press the OK button. The selected chapter is hidden. • To finish the operation, select Return using the ◄ ► buttons then press the OK button. ■ If there is only one chapter, it can’t be hidden.
Advanced Editing (Playlist) ▌Creating a Playlist DVD-Recorder Make Scene DVD-RW(VR) (VR mode) Scene No. 001 Start End Title List : 1/6 00:00:10 Follow these instructions to create a new playlist entry from a recorded title. 1. With the DVD Recorder in Stop mode, press the MENU button. 00:00:00 2. Press the ▲▼ buttons to select Playlist, then press the OK or ► button. 00:00:10 Start End Make MOVE Return OK RETURN DVD-Recorder EXIT Make Scene DVD-RW(VR) Scene No.
▌Renaming a Playlist Entry DVD-Recorder Rename DVD-RW(VR) (VR mode) Dolphin Follow these instructions to rename a playlist entry, i.e. to edit the title of a playlist entry. 1. With the DVD Recorder in Stop mode, press the PLAY LIST button. The Edit Playlist screen is displayed. Save Back Space Space OK MOVE Delete RETURN DVD-RW(VR) Clear 2. Press the ▲▼ buttons to select the title you want to edit from the Playlist, then press the OK or ► button. EXIT Edit Playlist Dolphin 3/5 No.
Modifying a Scene (Replacing a Scene) DVD-Recorder Edit Scene DVD-RW(VR) Scene No. 2/7 Playlist No. 3 Play Modify 01 00:00:26 02 00:00:07 03 00:00:04 Move Add ▼ 04 00:00:03 05 00:00:11 06 00:00:04 OK RETURN MOVE Delete EXIT Modify Scene DVD-Recorder DVD-RW(VR) Scene No. 002 Start End Title List : 5/6 00:00:25 00:00:00 Follow steps 1 to 3 in page 61. 4. Press the ▲▼◄ ► buttons to select the scene you want to modify, then press the OK button. 5.
Adding a Scene DVD-Recorder Edit Scene DVD-RW(VR) Scene No. 4/7 Playlist No. 3 Play Modify 01 00:00:26 02 00:00:07 03 00:00:04 ▼ 04 00:00:03 05 00:00:11 06 00:00:04 OK RETURN Move Add MOVE DVD-Recorder Delete EXIT Add Scene DVD-RW(VR) Scene No. 004 Start End Title List : 4/6 00:00:15 00:00:00 00:00:35 00:00:15 Start End Add MOVE OK Cancel RETURN EXIT Follow steps 1 to 3 in page 61. 4.
▌Copying a Playlist Entry to the Playlist Edit Playlist DVD-RW(VR) Dolphin 3/4 No. 01 02 03 04 Dolphin Title Science Sky Dolphin Natural 7 Scene Length Edit 00:00:17 ► 00:00:06 ► Play 00:00:06 ► Rename 00:00:37 ► Edit Scene Copy APR/23/2007 06:43 MOVE Delete OK RETURN 1. With the DVD Recorder in Stop mode, press the PLAY LIST button. The Edit Playlist screen is displayed. 2. Press the ▲▼ buttons to select the title you want to copy to the Playlist, then press the OK or ► button. 3.
▌Disc Protection Disc Manager DVD-Recorder DVD-RW(VR) Title List Disc Name : ► Playlist Disc Protection : Protected ► Disc Manager Disc Format ► Programme Disc Finalise ► Delete All Title Lists ► Setup OK MOVE : DVD-VR RETURN EXIT Disc Protection allows you to protect your discs from being formatted or deleted due to unintended operations. 1. With the DVD Recorder in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. 3.
▌Finalising a disc Disc Manager DVD-Recorder DVD-RW(VR) Title List Disc Name : ► Playlist Disc Protection : Not Protected ► Disc Manager Disc Format Do you want to :fiDVD-VR nalise disc? ► Programme Disc Finalise ► DeleteYes All Title Lists No ► Setup DVD-R155 only After you record titles onto a DVD-RW/±R disc with your DVD recorder, it needs to be finalised before it can be played back on external devices. 1. With the DVD Recorder in Stop mode, press the MENU button. OK MOVE 2.
▌Delete All Title Lists Disc Manager DVD-Recorder DVD-RW(VR) Title List Disc Name : ► Playlist Disc Protection : Not Protected ► Disc Format : DVD-VR Disc Manager Do you want to delete all title lists? ► Programme Disc Finalize ► Setup Delete Yes All Title ListsNo MOVE OK RETURN ► EXIT DVD-R155 only 1. With the DVD Recorder in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. 3.
Additional Information icon appears on the screen. Troubleshooting Checkpoint 1 If your DVD Recorder malfunctions, go through the checkpoints below before contacting a Samsung authorised service centre. ▌Power The input is displayed for a while when the power is turned on. Checkpoint 1 The DVD recorder requires some time to initialise and the input will be displayed for approx. 10 seconds after it is turned on.
Abnormal HDMI output screen. ▌Sound Checkpoint 1 No sound. Checkpoint 1 Are you watching a programme in slow or skip mode? If you are playing a programme at a speed other than normal or fast 1 speed, sound will not be heard. Checkpoint 2 Check the connections and settings. (See pages 17~18, 27~28) Checkpoint 3 Check whether the disc is damaged. Clean the disc, if necessary. Checkpoint 4 Check whether the disc is inserted correctly with the label facing up. No audio output.
Specifications Power requirements AC 220-240V, 50Hz Power consumption 19 Watts Weight 2,6 kg General Dimensions 430mm(W) x 240mm(D) x 49mm(H) Operating temp. +5°C to +35°C Other conditions Keep level when operating. Less than 75% operating humidity Video Composite Video : 1,0 V p-p at 75Ω load, sync negative Audio Max.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region North America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL Latin America CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE Europe CIS GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.
English 01274F-R150,155-XSH-ENG.
