DVD VIDEO RECORDER Operating Instructions Model No. DVD-R4000 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Region number supported by this unit Region numbers are allocated to DVD players and software according to where they are sold. ≥The region number of this unit is “1”. ≥The unit will play DVDs marked with labels containing “1” or “ALL”.
. Getting started CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Table of contents Getting started Editing Getting started IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up STEP 1 Antenna and television connections . . . . . . . . . . . . . . . 5 STEP 2 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna and television connections Preparation To enjoy sound through other audio equipment (➜page 42) To enjoy progressive video ≥Refer to the television’s operating instructions. ≥Turn the television off and disconnect its AC power supply cord. Connect to the component video(480P) input terminals on a television compatible with this unit’s copy guard system. (Video will not be displayed correctly if connected to an incompatible television.
STEP 2 The remote control STEP 3 Plug-in Auto Tuning Batteries R6/LR6, AA, UM-3 - Setting up + - + Numbered buttons ≥Insert so the poles (i and j) match those in the remote control. ≥Do not use rechargeable type batteries. Do not: ≥mix old and new batteries. ≥use different types at the same time. ≥heat or expose to flame. ≥take apart or short circuit. ≥attempt to recharge alkaline or manganese batteries. ≥use batteries if the covering has been peeled off.
≥Confirm that the antenna is connected correctly. ≥Turn on the television and select the appropriate video input to suit the connections to this unit. 1 2 Press [3, 4] to select “Channel” and press [1]. SETUP Press [Í, DVD POWER] to turn the unit on. Select Language Channel Set Up Disc Seleccione la Lengua Sélection de Langue 3 English Español Français Press [3, 4] to select the menu language and press [ENTER].
STEP 4 VCR Plusi guide channel settings 3 e.g., when the current antenna system is CATV. DVD POWER TV DVD Í Press [3, 4] to select “VCR Plusr CH Setting” and press [ENTER].
Other channel settings Press [SETUP] to show the menus. Press [3, 4] to select “Channel” and press [1]. SETUP Channel Set Up Disc Video Audio Display TV Screen Antenna System ENTER Channel Set Up Disc Video Audio Display TV Screen Proceed with the steps described below. VCR Plusi CH Setting TAB 4 RETURN Preset Channel Caption 3 Press [3, 4] to select “Preset Channel Caption” and press [ENTER].
STEP 5 Set up to match your television To return to the previous screen Press [RETURN]. When you are finished Press [SETUP]. ∫ Regarding Progressive Television Picture Numbered buttons Setting up Progressive image aspect (height to width ratio) is set at a standard 16:9. DVD-Video which has been set at 16:9 will be displayed correctly. However, 4:3 video material will be stretched to the right and left when displayed.
Disc information Play-only discs DVD-Video DVD-RAM 4.7 GB/9.4 GB, 12 cm (5z) 2.8 GB, 8 cm (3z) DVD-R 4.7 GB 12 cm (5z) 1.4 GB, 8 cm (3z) for General Ver. 2.0 ≥Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for recording. ≥Discs with programs recorded in PAL already cannot be recorded on using this unit.
Control reference guide Remote control Setting up D 1 Í E Í F 2 3 G H 4 I 5 6 J 7 K 8 L 9 : M ; < N O = > ? P @ A Q B R S C T How to open the remote control Hold both sides of the remote control’s cover to open it. (You can also open it by pressing on the center of it and sliding it down.) 12 DVD-R4000 1 POWER button (Í, DVD (POWER)) . . . . . . . . . . . . . . . . . . 7, 14 Press to switch the unit from on to standby mode or vice versa.
Main unit U W V Setting up [ U V W X Z Y X Power button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14 Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Channel buttons for recorder (CHANNEL). . . . . . . . . . . . . . 14 L2 input terminals (L2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Y Display Z Time slip indicator (TIME SLIP) . . . . . . . . . . . . . . . . . . . . . . .
Recording television programs 1 5 3 Disc tray 2 [RAM] [DVD-R] 1 2 Recording 4 3 Press [Í, DVD POWER] to turn the unit on. Press [< OPEN/CLOSE] to open the tray and insert a disc (➜ next page). ≥Press the button again to close the tray. ≥It is not possible to record continuously from one side of a double sided disc to the other. You will need to eject the disc and turn it over. Ensure [DVD, TV] is switched to “DVD” and press [W, X, CH] to select the channel. e.g.
Inserting discs Recording from a video cassette recorder [RAM] [DVD-R] You can insert a cartridge or non-cartridge disc. [RAM] [DVD-R] Preparation Non-cartridge disc Connect a video cassette recorder to this unit’s input terminals (➜page 43). Insert inside the tray’s guides. 1 Cartridge disc Insert label-up with the arrow facing in. 2 [Note] ≥Load double-sided discs so the label for the side you want to record/play is facing up.
Playing discs 1 Disc tray 2 3 [RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3] 1 2 ERASE :/22,11 / 9 Playing back 3 Numbered buttons To stop play Press [∫]. ≥When “PLAY” flashes on the display, resume function is active. Press [1] (PLAY) to start play from where you stopped it. To cancel, press [∫] until “PLAY” goes out. (The position is also cleared when you turn the unit off or open the disc tray.) ≥The screen saver may appear when you stop play.
Press the numbered buttons (0, 1j9) to select an item. e.g., “5”: [0] ➜ [5] “15”: [1] ➜ [5] [RAM] [DVD-R] A list of programs is created as you record them. You can use this list to find programs to watch. 1 Press [DIRECT NAVIGATOR]. The highlighted program plays in the background. DIRECT NAVIGATOR [DVD-V] Press [3, 4, 2, 1] to select an item and press [ENTER]. 3 ≥You may also be able to use the numbered buttons (0, 1j9) to select an item.
Other methods of play Slow-motion play [RAM] [DVD-R] [DVD-V] [VCD] While paused Press [6] or [5]. Press and hold [82/6] or [5/9] on the main unit. Numbered buttons [Note] ≥The speed increases up to 5 steps. ≥Press [1] (PLAY) to restart play. ≥Backward ([6] [82/6]) does not work with Video CDs. PLAY Frame-by-frame viewing Playing back [RAM] [DVD-R] [DVD-V] [VCD] 3, 4, 2, 1 ENTER While paused Press [2;] or [;1]. [Note] ≥Each press shows the next frame. ≥Press [1] (PLAY) to restart play.
Selecting an amount of time to skip— Time Slip [RAM] [DVD-R] 1 During play Press [TIME SLIP]. 2 Within 5 seconds Press [3, 4] to enter the time and then press [ENTER]. e.g., Go back to 5 minutes –5 min Playing back 0 min Press to change in one-minute units. Press and hold to change in 10-minute units. Fast forward and rewind—SEARCH [RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3] During play Press [6] or [5]. ≥Press and hold [:/22]] or [11 / 9] on the main unit. [Note] ≥The speed increases up to 5 steps.
Marking places to play again—MARKER Using on-screen menus to mark positions Displaying the marker icon 1 During play Press [DISPLAY]. The on-screen menus appear. (e.g., DVD-RAM) Disc Play Video Audio Playing back 2 Sound track 3 Î Digital 2/0ch OFF LR Audio channel Press [3, 4] to select the “Play” and press [1]. Disc Play Video Audio 3, 4, 2, 1 ENTER 1 Subtitle Repeat play Marker OFF 1s10 †††††††††† Press [3, 4] to select “Marker” and press [1] to highlight the first asterisk (¢).
Using menus to play MP3 discs Using the tree screen to find a group 1 Numbered buttons While stopped Press [1] while a track is highlighted to display the tree screen. Selected group no. /Total group no. ≥If the group has no track, “– –” is displayed as group number. No.
Playing while you are recording Simultaneous recording and play [RAM] You can play a program previously recorded. 1 During recording Press [DIRECT NAVIGATOR]. Time slip indicator lights. 2 1 ∫ Playing back 3, 4, 2, 1 ENTER Press [3, 4] to select a program and press [ENTER]. e.g., You want to watch the movie you recorded yesterday (program 1) while recording program 2 (sports program). Program 1 is played back while program 2 (sport) is being recorded.
Changing audio Using the FUNCTIONS window 3, 4, 2, 1 ENTER Press [AUDIO]. How the type changes depends on when you press the button. 1 ∫ While receiving MTS audio (Multi-channel Television Sound Stereo) Stereo: Main audio (stereo) v SAP: Secondary audio program (SAP) v Mono: Main audio (monaural) v (Return to Stereo) ≥If the broadcast is “Mono i SAP”, audio will be monaural even if you select Stereo mode. ≥Select “Mono” if reception is poor during a stereo broadcast. e.g.
Timer recording Preparation ≥Ensure the clock (and guide channels for VCR Plusr recording, ➜page 8) are set correctly. ≥Release protection (cartridge ➜page 11, disc ➜page 34) before proceeding. [RAM] Using VCR Plusr codes to make timer recordings Entering VCR Plusi codes is an easy way of programming the unit for recording. You can find these codes in TV Guides and magazines. You can enter up to 16 programs up to a month in advance. Numbered buttons 1 Press [VCR Plusr].
4 You can enter up to 16 programs up to a month in advance. Each daily or weekly program is counted as one program. 1 Remaining Recording Time 1:58 SP 3/26 TUE12:55 PM 3/26 TUE 12:55 PM SELECT CANCEL ENTER RETURN Press ENTER or VCR Plus+ to store new program 5 Press [ENTER]. TIMER RECORDING Remaining Recording Time 1:58 SP 3/26 TUE 12:55 PM CHANNEL ---3 4 DATE ---------- ON --:-- -- OFF --:-- -- MODE -- Enter Title No.
Timer recording Message displayed in the CHECK line Some of the information shown in the CHECK line may not be correct while you are recording. Enable: Displayed if the recording can fit in the remaining space on the disc. > (Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.
Entering text Preparation Release protection (cartridge ➜page 11, program ➜page 32, disc ➜page 34) before proceeding. 1 Numbered buttons After the titling screen appears Press [3, 4, 2, 1] to select the character and press [ENTER]. Title field: shows the text you have entered Enter Title _ ; 3, 4, 2, 1 ENTER π ERASE SET 0 –– 100 SELECT 1 1 2 3 2 A B C 3 D 4 G E F H I 5 J K L j 6 M N O 7 P 8 T Q R U V 9 W X 0 .
Creating play lists 1 2 While stopped Press [PLAY LIST]. Press [3, 4] to select “–– ––/––” and press [ENTER]. Numbered buttons PLAY LIST --- --- --- --- No DATE TOTAL SCENE 3 SELECT 3 EDIT 1 1 1 1 1 1 - - :- - --- 3 3, 4, 2, 1 ENTER - - - - /- RETURN --- TITLE 01 10/23 0:03 006 Dinosaur 02 10/26 0:07 006 USJ 03 10/21 0:06 004 Auto action No. 0 ~ 9 ENTER --- Press [ENTER] at the start point. The length of the whole contents on the disc. PLAY LIST Creation PLAY LIST No.
4 Playing play lists While stopped The scene you select is played. Press [PLAY LIST]. To show scene 10 and later Press [3, 4, 2, 1] to select “Next” and press [ENTER]. ≥You can also select a page of scenes by entering a 3-digit number with the numbered buttons. e.g., “5”: [0] ➜ [0] ➜ [5] “15”: [0] ➜ [1] ➜ [5] PLAY LIST 001 002 004 --- 003 --- No DATE TOTAL SCENE No.
Editing play lists Editing [RAM] 30 DVD-R4000
∫ Add (maximum of 999 scenes) Press [3, 4, 2, 1] to select the place where you want to add the scene and press [ENTER]. PLAY LIST PLAY LIST No.3 Dinosaur Add Scenes 01 Press [ENTER] at the start point of the scene. PLAY Scene No. 5 Start End Next Exit ENTER 0 : 00 . 05 3 SELECT RETURN Start End 0 : 00 . 05 --:--.-- Press [ENTER] at the end point of the scene. Press [3, 4] to select "Exit" and press [ENTER]. The new scene is inserted before the highlighted scene.
Editing programs Operation Press [DIRECT NAVIGATOR]. Erase Program Erase Program [RAM] [DVD-R] 0 : 58 SP Remaining Recording Time Corresponding PLAY LIST will also be erased. Erase The program, and play lists created from it, are erased irretrievably when you use this procedure. Check carefully before proceeding.
Press [2] to select "Erase" and press [ENTER]. [Note] ≥ The disc’s available recording time may not increase after erasing short programs. ≥ Computer data cannot be erased. ≥ The available recording time on DVD-R does not increase when you erase programs. The program is erased. Press [ENTER] at the start point of the section you want to erase.
Disc setting Operation Enter Title While stopped Press [FUNCTIONS]. [RAM] [DVD-R] Entering text ➜ page 27 Enter Title _ ; π 1 1 2 3 6 7 2 A B C a b c 3 D 4 G E F d e f / l % H I g h i fl $ j k n l O N @ m o [ ] _ p q r s ( t u v { } ) - w x " ' y : z ; \ ` | ^ 5 J ERASE SET 0 ññ 100 SELECT K L 6 M N O 7 P 8 T Q R U V 9 W X 0 .
DISC SETTING Prog # Used 7 Free 0 : 42 (SP) 0 : 58 Total Mark 10 Enter Title Disc Protection Erase all programs SELECT Format ENTER Press [2] to select Press [2] to select "Yes" and "Start" and press press [ENTER]. [ENTER]. Press [2] to select "Yes" and press [ENTER]. Press [2] to select "Start" and press [ENTER]. Press [2] to select "Yes" and press [ENTER]. Press [2] to select "Start" and press [ENTER]. Formatting starts. ≥ A message appears when formatting is finished. Finalizing starts.
Using on-screen menus Disc menu Not available when playing CDs and MP3 discs. e.g., DVD-RAM Disc Play Video Audio Numbered buttons Sound track Î Digital 2/0 ch 1 Subtitle OFF Audio channel LR Item Sound track Content Soundtrack language [DVD-V] See [A] below. Audio attribute [RAM] [DVD-R] [DVD-V] See [B] below. Karaoke vocals, on and off (Karaoke [DVD-V] only) Solo: ON()OFF Duet: OFF()V1+V2()V1()V2 3, 4, 2, 1 ENTER ^=======J Subtitle Subtitle language [DVD-V] See [A] below.
Play menu e.g., DVD-RAM Disc Play Video Audio Repeat play Marker OFF 1s10 Item †††††††††† Content Each time you press [3, 4]: [RAM] [DVD-R] [DVD-V] PRG: Program Chapter All Title PL: Play list ([RAM]) OFF OFF Repeat play [VCD] [CD] Track All OFF [MP3] Track Group OFF Remarks ≥You cannot use repeat play to repeat an entire DVD-Video. ≥Repeat play does not work if the disc’s elapsed play time is not shown on the unit’s display. ≥[ERASE] does not work while in repeat play mode.
Using on-screen menus Video menu Not available when playing CDs and MP3 discs. [RAM] [DVD-R] [DVD-V] [VCD] Disc Play Video Audio Picture Normal MPEG-DNR ON Advanced operation Item 38 DVD-R4000 Content Picture Normal: Default setting Soft: Soft picture with fewer video artifacts Fine: Details are sharper Cinema: Mellows movies, enhances detail in dark scenes. MPEG-DNR You can turn the recommended settings for 3D NR, block NR, and mosquito NR on and off.
On-screen displays Displays appear on the television when you operate the unit to let you know what operation was performed and what condition the unit is in. ≥You can change the setting in the SETUP menu so the first display does not appear automatically (➜page 47, Display—Status Messages). Changing the information displayed Press [STATUS]. The display changes each time you press the button. e.g., DVD-RAM DVD-RAM REC PLAY LR πRemain 6/8 10:15 PM π PRG2 0:05.14 XP π PRG1 0:00.10 SP 0:50 XP Bit Rate 0 .
Home Theater Refer to the relevant pages for details. Enjoying CATV/Satellite broadcasts What you want to do Enjoying CATV/Satellite broadcasts How to do it Connect a cable TV box or satellite receiver. Reference pages 41 Settings Reference pages Tune to channels correctly. 9 Change the necessary settings on the equipment you have connected. — SETUP—Audio— Digital Audio Output ≥Set PCM Down Conversion to suit the equipment. ≥Set Dolby Digital and DTS to suit the equipment.
≥The equipment connections described are examples. ≥Peripheral equipment and optional cables sold separately unless otherwise indicated. ≥Before connection, turn off all equipment and read the appropriate operating instructions. ≥The signal from the cable TV box or satellite receiver passes through this unit to the television even when this unit is turned off. Connecting a cable TV box/satellite receiver You need to subscribe to a cable TV or satellite TV service, to enjoy viewing their programming.
Home Theater Connecting an amplifier or system component This model can play Dolby Digital, but only in two channels. This model does not have a DTS decoder. You must connect a unit with a Dolby Digital or DTS decoder to enjoy surround sound. A B Digital connection To enjoy multi-channel surround sound Connect an amplifier with a built-in decoder or a decoder-amplifier combination. ≥Change the settings in “Digital Audio Output” (➜page 47).
Connecting other video equipment Connecting to the L2 input terminals on the front of the unit Connecting to the input terminals on the rear of the unit, L1 and L3 VIDEO S-VIDEO (L1) R-AUDIO-L VIDEO S-VIDEO (L3) IN 1 R-AUDIO-L OUT IN 3 This unit R-AUDIO-L VIDEO This unit yellow white red red white yellow S video cable§ S video cable§ Audio/Video cable (included) Audio/Video cable (included) L R AUDIO VIDEO OUT OUT S VIDEO OUT Other video equipment Connect to the video and audio outpu
Other antenna connections Other antenna connection to the unit Use one of the following connections to suit the antenna lead. ∫ A single twin lead 300–75 ≠ transformer (not included) Other antenna connection from the unit to the television Use one of the following connections to suit the antenna terminals on your television. Refer to the television’s operating instructions.
Changing the remote control code While stopped Press [SETUP] to show the menus. SETUP Channel Set Up Disc Video Audio Display TV Screen Numbered buttons 2 3 3, 4, 2, 1 ENTER 4 5 6 Antenna System CATV Auto Channel Setting Channel Caption Preset Channel Caption Manual Channel Caption VCR Plusi CH Setting TAB SELECT RETURN Press [3, 4] to select “Set Up” and press [1]. Press [3, 4] to select “Remote Control Code” and press [ENTER]. Press [3, 4] to select the code (1, 2, or 3) and press [ENTER].
Changing the unit’s settings Summary of settings This chart shows the initial settings for this unit. See page 48 for details on menu operation. ≥Underlined items are the factory presets. Tabs Menus Channel Antenna System (➜page 7) Select to suit the type of antenna you are using. Channels are set corresponding to the antenna system you select. Auto Channel Setting (➜page 7) The unit sets the channels automatically. Preset Channel Caption (➜page 9) You can give preset captions to the channels.
Menus Still Mode Select the type of picture shown when you pause play. Black Level Control Select normal, lighter or darker for adjusting the black level control to the desired setting for picture enhancement. Audio Display TV Screen Options ≥Automatic ≥Field: Less blurred field stills are shown. Select if jittering occurs when “Automatic” is selected. ≥Frame: Sharper frame stills are shown. Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.
Changing the unit’s settings Common procedures See page 46 for menu and option details. 1 While stopped Press [SETUP] to show the menus. SETUP Numbered buttons Antenna System CATV Auto Channel Setting Channel Caption Channel Settings Preset Channel Caption Set Up Manual Channel Caption Disc Video Audio Display TV Screen VCR Plusi CH Setting Tabs 3, 4, 2, 1 ENTER 2 3 4 TAB SELECT RETURN Menus Options Press [3, 4] to select the menu’s tab and press [1].
Clock settings Preparation 1 2 Manual Clock Setting 3 Press [SETUP] to show the menus. Press [3, 4] to select “Set Up” and press [1]. SETUP Channel Set Up Disc Video Audio Display TV Screen Off Timer SELECT MONTH Channel Set Up Disc Video Audio Display TV Screen 6 hr Remote Control Code Set Code 1 Clock Settings Auto Clock Setting Manual Clock Setting 0 Time Zone Adjust Re-initialize Setting Proceed with the steps described below.
Glossary Bitstream This is the digital form of multi-channel audio data (e.g., 5.1 channel) before it is decoded into its various channels. CPRM (Content Protection for Recordable Media) CPRM is the copyright protection technology that is used to protect broadcasts that are allowed to be recorded only once (e.g. some CATV broadcasts). Decoder A decoder restores the coded audio signals on DVDs to normal. This is called decoding.
Error messages On the television Page No disc. ≥You haven’t inserted a disc. Correctly insert a disc that this unit can use. ≥The disc is upside down. If it is a single-sided disc, insert it so the label is facing up. 11 15 This is non-recordable disc. ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R. ≥You inserted an unformatted DVD-RAM. Format the disc with this unit. 11 34 This disc cannot be read. ≥You inserted an incompatible disc.
Troubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: SAMSUNG ELECTRONICS AMERICA,INC. -SERVICE DIVISION 400 Valley Road, Suite 201, Mt Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) www.samsungusa.com Power Page No power. ≥Insert the AC power supply cord securely into a known active AC outlet. 5 The unit switches to the standby mode.
Sound Page No sound. Low volume. Distorted sound. ≥Check the connections. Check the input mode on the amplifier if you have connected one. Cannot hear the desired audio type. ≥Press [AUDIO] to select the desired audio type. Cannot switch audio during stereo or SAP broadcasts. ≥You have used digital connection. Set “Dolby Digital” to “PCM” or connect to other equipment using audio cables (analog connection). ≥You cannot change the audio type when a DVD-R is in the disc tray.
Troubleshooting guide Recording and timer recording Cannot record. VCR Plusr programming does not work properly. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit can record onto. ≥The disc is unformatted. Format the disc so this unit can record on it. ≥The write-protect tab on the cartridge is set to PROTECT. ≥Some programs have limitations on the number of times they can be recorded (CPRM). ≥The disc is protected with DISC SETTING.
Specifications Optical pick-up: Recordable discs: Recording time: Discs played: Video system TV system: Recording system: Input: Output: DVD video recording standards (DVD-RAM), DVD video standards (DVD-R) System with 1 lens, 2 integration units (662 nm wavelength for DVDs, 790 nm wavelength for CDs) 12 cm (5q) 4.7 GB DVD-RAM discs 12 cm (5q) 9.4 GB DVD-RAM discs 8 cm (3q) 2.8 GB DVD-RAM discs 12 cm (5q) 4.7 GB DVD-R discs 8 cm (3q) 1.4 GB DVD-R discs (for General Ver. 2.0) Max. 6 hours (using 4.
Limited Warranty (ONLY FOR U.S.A.) This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
Limited Warranty (ONLY FOR CANADA) Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this porduct falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
Instalación básica Conexiones del televisor y de la antena A la antena Televisor Cable de TV AUDIO IN R L VIDEO IN VHF/UHF RF IN Antena exterior Cable de alimentación de CA (incluido) Conecte por último. Conecte también los cables de alimentación de CA para el otro equipo.
Instalación para ajustar su televisor Cambie los ajustes si su televisor es: ≥De pantalla panorámica (relación del ancho a la altura de la imagen 16:9) ≥Progresivo – Si desea información más detallada, lea el manual de instrucciones de su televisor. 1 Pulse [SETUP] para visualizar los menús. 2 Pulse [3, 4] para “Canal” y pulse [1]. seleccionar 1 Pulse [SETUP] para visualizar los menús. 3 Pulse [3, 4] para seleccionar “VCR Plusr Ajuste canal” y pulse [ENTER].
Grabación de programas de televisión [RAM] [DVD-R] Bandeja del disco 1 5 43 2 1 2 TIME SLIP 3 Botones numerados Pulse [Í, DVD POWER] encender el aparato. para Pulse [< OPEN/CLOSE] para abrir la bandeja e introduzca un disco (➜ siguiente página). ≥Vuelva a pulsar el botón para cerrar la bandeja. ≥En un disco de doble cara, no es posible grabar de manera continua desde una cara a la otra. Será necesario expulsar el disco y darle la vuelta.
Introducción de discos Reproducción durante la grabación [RAM] [DVD-R] Puede introducir un disco con o sin estuche. [RAM] Reproducción desde el inicio del programa que está grabando—Reproducción encadenada Disco sin estuche Introduzca dentro de las guías de la bandeja. Pulse [1] (PLAY). La reproducción se inicia desde el principio del programa que se está grabando. (Se enciende el indicador Time Slip).
Reproducción de discos 1 Bandeja del disco 2 [RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3] :/22,11 / 9 1 2 3 ERASE 3 Botones numerados Pulse [Í, DVD POWER] para encender el aparato. Pulse [< OPEN/CLOSE] para abrir la bandeja e introducir un disco (➜ página 61). ≥Vuelva a pulsar el botón para cerrar la bandeja. ≥Si está activada la protección del estuche, pulsando [< OPEN/CLOSE] se iniciará automáticamente la reproducción.
Al grabar una serie de programas, se crea un lista. Puede utilizar esta lista para encontrar programas para su visualización. 1 por ejemplo., “5”: [0] ➜ [5] “15”: [1] ➜ [5] [DVD-V] Pulse [3, 4, 2, 1] para seleccionar un elemento y pulse [ENTER]. 2 ≥Puede que también sea posible utilizar los botones numerados (0, 1j9) para seleccionar un elemento. Otros botones utilizados para activar menús Si desea más información sobre el funcionamiento, lea las instrucciones de los discos.
Index Angle . . . . . . . . . . . . . . . . . . . . . . . . 36 Antenna system . . . . . . . . . . . . . . . . 7 Audio attribute . . . . . . . . . . . . . . . . 36 Channel caption . . . . . . . . . . . . . . . . 9 Channel setting . . . . . . . . . . . . . . . . 9 Chasing play . . . . . . . . . . . . . . . . . . 22 Cleaning disc . . . . . . . . . . . . . . . . . . . . . . . . . 50 lens . . . . . . . . . . . . . . . . . . . . . . . . . 54 main unit . . . . . . . . . . . . . . . . . . . . . 54 Clock setting .