DVD-VR375 DVD & VCR user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register 01613A-01-VR375-XAA-ENG.
getting started WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous CAUTION: TO REDUCE THE RISK OF ELECTRIC voltage consisting a risk of electric shock SHOCK, DO NOT REMOVE COVER (OR BACK) NO is present within this unit. USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
M This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VCR cannot play the disc. This device is protected by U.S. Patent Nos.4,631,603;5,315,448;4,819,098;4,907,093; and 6,516,132. This This product is covered by one or more of the following U.S.
getting started 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
DVD-RAM, DVD±RW and DVD±R • Clean with an optional DVD-RAM/PD disc cleaner. Do not use cleaners or cloths for CDs to clean DVD-RAM/DVD±RW/DVD±R discs. DVD-Video, Audio CD • Wipe off dirt or contamination on the disc with a soft cloth. Cautions on handling discs ● GETTING STARTED • Do not write on the printed side with a ball-point pen or pencil. • Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or thinner. • Do not apply labels or stickers to discs.
getting started ❖ JPEG CD-R/-RW • • • • • Only JPEG files with the ".jpg", ".JPG" extension can be used. The unit can handle a maximum of 1000 files and folders. Maximum size of progressive JPEG is 3M pixels. MOTION JPEG is not supported. DVD-RAM/±RW/±R discs that contain JPEG files can be played back. ❖ Using CD-R/-RW • Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back.
DVD+RW Disc Playback and Recording • With DVD+RW discs, there is no difference between DVD-Video format (Video mode) and DVD-Video Recording format (VR mode). • Finalizing is generally unnecessary when using a DVD+RW disc. DVD-RAM Disc Playback and Recording For cartridge type DVD-RAM discs, remove the cartridge and use only the disc. You cannot play a DVD-RAM in most DVD players due to compatibility issues. Only DVD-RAM standard Version 2.0 discs can be played in this unit.
getting started GETTING STARTED 2 CONNECTING & SETTING UP 19 SYSTEM SETUP 28 PLAYBACK 46 2 3 10 11 12 13 17 Warning Precaution General Features Before Reading the User’s Manual How to use the DVD Recorder & VCR Unpacking Description 19 Connecting a set top/cable box or satellite receiver to DVD Recorder & VCR Connecting HDMI/DVI to a TV Connecting the video output Connecting the Audio Cable Connecting External Devices 21 23 24 26 28 28 30 30 32 32 35 37 38 40 41 42 On-Screen Menu Navigation Easy
Recordable discs Recording Mode Unrecordable Video Recording immediately Recording through The DV Input jack Making a One Touch Recording (OTR) Making a Timer Recording Editing the Timer List ERASING the Timer List Basic VCR Recording Check Remaining Time Special Recording Features Dubbing to DVD or VIDEO DV/D8 Dubbing 69 70 73 76 Playing the Title List Basic Editing (Title List) Advanced Editing (Playlist) Disc Setting REFERENCE 80 80 81 82 83 Troubleshooting (DVD-VIDEO/DVD-RAM/ DVD±RW/DVD±R) Troubl
getting started GENERAL FEATURES The DVD-VR375 allows you to record, edit and play high quality digital video on DVD-RAM/DVD±RW/DVD±R discs. High quality digital audio/video recording and playback You can record up to approximately 16-hours of video on a double side 9.4 GB DVD-RAM disc,up to 15hours on a dual-layer 8.5GB DVD±R disc, and up to 8-hours on a 4.7 GB DVD-RAM/DVD±RW/DVD±R disc, depending on the recording mode.
BEFORE READING THE USER’S MANUAL Make sure to check the following terms before reading the user’s manual. Icons that will be used in manual Icon J M N H Definition DVD This involves a function available with DVD or DVD-R(V)/DVD-RW(V)/+R discs that have been recorded and finalized. RAM This involves a function available with DVD-RAM discs. -RW This involves a function available with DVD-RW discs.
getting started HOW TO USE THE DVD RECORDER & VCR Step 1 : Select the disc type This unit can record on the following types of discs. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without making any changes, choose a non-rewritable DVD±R. Step 2 : Format the disc to start recording Unlike a VCR, the recorder automatically starts formatting when an unused disc is inserted.
Creating a playlist (DVD-RAM/-RW/-R in VR mode) With this recorder, you can create/edit a new playlist on the same disc without changing the original recording. Step 6 : Finalizing & Playing on other DVD components To play your DVD on other DVD players, finalizing may be necessary. First, finish all editing and recording operations, then finalize the disc. Although finalizing is generally unnecessary when playing the disc on a VR Mode compatible component, a finalized disc should be used for playback.
getting started Connecting the Power Cord After all connections are complete, plug the power cord into a wall outlet. Preparing the Remote Control Installing batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown. 2. Install two AAA size batteries. 3. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Replace the cover. Assuming typical TV usage, the batteries last for about one year.
You can control part of another manufacturer’s TV functions with this remote control. • Buttons that can be controlled on your TV : TV POWER, INPUT SEL., TV VOL +/-, TRK/CBC CH/TV CH (,/.), TV MUTE, 0~9, TV 100+/SET Button. To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3.
getting started Tour of the Remote Control DVD Button Press this when you use the DVD recorder/player. TV Button Press this to operate your TV. POWER Button Press to power the DVD Recorder & VCR on and off. NUMBER Buttons VCR Button Press this when you use the VCR. INPUT SEL. Button Press this to select the AV input signal in external input mode. (AV input, DV input). OPEN/CLOSE Button Press this to open and close the disc tray. TV POWER Button Press to power your TV on and off.
DESCRIPTION Front Panel ● GETTING STARTED DVD OPEN/CLOSE BUTTON VCR DECK VCR EJECT BUTTON CH (./,), SEARCH/SKIP BUTTON PLAY/PAUSE BUTTON STOP BUTTON RECORD BUTTON DUBBING BUTTON DVD/VCR SELECT BUTTON 10 FRONT PANEL DISPLAY 11 DVD DECK 12 DV INPUT JACK 13 AUDIO L, R INPUT JACKS (AV 2 IN) 14 VIDEO INPUT JACK (AV 2 IN) 15 POWER BUTTON English _17 01613A-01-VR375-XAA-ENG.
getting started Front Panel Display Playback-related indicator In Disc Indicator DVD VIEW Indicator VCR VIEW Indicator Disc Media Indicator TIMER Indicator HDMI Indicator REC Indicator STATUS Indicator HDMI OUT VIDEO INPUT JACK (AV 1 IN) VIDEO OUT JACK (AV OUT) AUDIO OUT JACKS (COMPONENT OUT) COMPONENT VIDEO OUT JACKS DIGITAL AUDIO OUT JACK (COAXIAL) AUDIO OUT JACKS (AV OUT) AUDIO INPUT JACKS (AV 1 IN) SET TOP BOX CONTROL Rear Panel 18_ getting started 01613A-01-VR375-XAA-ENG.
connecting & setting up CONNECTING A SET TOP/CABLE BOX OR SATELLITE RECEIVER TO DVD RECORDER & VCR With the connection below, you can watch and record your desired channel on the Set top/Cable box or satellite receiver. The DVD-VR375 does not have a TV Tuner , so you must connect a Set top/Cable Box or Satellite receiver to watch or record TV through DVD Recorder & VCR. You can record channels by selecting the channel on the Set top/Cable box or satellite receiver.
connecting & setting up C. Move the Set top/Cable Box's remote across the front of the Set top/Cable Box while pressing the remote's power button On and Off (Figure 2). Figure 2 (Press and release the power button each time you move the remote; holding down the button will not work.) D. When the Set top/Cable box powers On, you have found the sensor. E. Remember the location of the sensor. 3. Placing the IR Blaster.
CONNECTING HDMI/DVI TO A TV Connecting to a TV with an HDMI Jack J ● CONNECTING & SETTING UP HDMI ( High Definition Multimedia Interface) HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. Using an HDMI- HDMI cable(not included), connect the HDMI OUT jack on the rear of the DVD Recorder & VCR to the HDMI IN jack of your TV.
connecting & setting up Connecting to a TV with a DVI Jack Using an HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder & VCR to the DVI IN terminal of your TV. An HDMI to DVI connection requires a separate audio connection, using the audio cables, connect the AUDIO (red and white) OUT (AV OUT) terminals on the rear of the DVD Recorder & VCR to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD Recorder & VCR and TV.
CONNECTING THE VIDEO OUTPUT Besides HDMI, there are several other ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages. Connecting to Component Video Input Jacks (Y, PB, PR) Connect Component video cables (not supplied) between the COMPONENT OUT (Y, PB, PR) jacks on the DVD Recorder & VCR and COMPONENT IN (Y, PB, PR) jacks on your TV. ● CONNECTING & SETTING UP Green Blue Red • You will enjoy high quality images.
connecting & setting up Connecting to a Video Input Jack Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on the DVD Recorder & VCR and VIDEO(yellow) IN jack on the TV. Yellow Red White • You will enjoy regular quality images. This connection outputs the 480i resolution to your TV. • Connect the audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on your TV(or AV amplifier).
Connecting to a Stereo Amplifier with Analog Input Jacks If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT (AV OUT) jacks. ● CONNECTING & SETTING UP Red White Connecting to an AV Amplifier with a Digital Input Jack If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital or DTS sound, you will need to set up the audio settings. (See page 32~34) Manufactured under license from Dolby Laboratories.
connecting & setting up CONNECTING EXTERNAL DEVICES This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs. Connecting a VCR, Set top/Cable box, satellite receiver or DVD player to the AV 1 IN Jack Connecting a VCR or external device to AV 1 IN jacks of the DVD Recorder & VCR. You can record from connected equipment (VCR, Set top/Cable box, satellite receiver or DVD).
Connecting a Camcorder You can record from connected equipment, such as a camcorder by using the AV2 IN or DV IN jacks on front of the DVD Recorder & VCR. M Red ● CONNECTING & SETTING UP Yellow White Check your camcorder's owner's manual to see how to use the camcorder in this mode. English _27 01613A-01-VR375-XAA-ENG.
system setup ON-SCREEN MENU NAVIGATION The on-screen menus allow you to enable or disable various functions on your DVD Recorder & VCR. Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus. 1. ▲▼ Buttons Press these buttons on the remote control to move the selection bar ▲▼ to cycle through the menu options. 2. ENTER Button Press this button on the remote control to confirm any new settings. 3.
9. Press the ◄ ► buttons to select OK, then press the ENTER button. Easy Setup 12:00 AM Enter the brand code of your set top box. 10.Select whether or not you use the Set Top Box Pass-through, then press the ENTER button. Please refer to page 39. The setup display for clock setting appears. 11.Press the ▲▼◄ ► buttons to select the Current Date and Time, then press the ENTER button. 13.Press the ▲▼ buttons to select the desired TV screen type, then press the ENTER button.
system setup CLOCK SET This menu is used to set the current time. You need to set the time to use timer recording. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press ENTER. 3. Press the ▲▼ buttons to select Clock Set, then press ENTER. 4. Press the ▲▼◄ ► buttons to select the Current Date and Time, then press the ENTER button.
Resolution (HDMI) This setting is used when the unit is connected by HDMI or DVI to Display devices (TV, Monitor, etc). • 480p : 720 x 480p • 720p : 1280 x 720p • 1080i : 1920 x 1080i • 1080p : 1920 x 1080p • Connect the DVD-VR375 to your TV via HDMI or DVI. Set your TV's input to HDMI or DVI.
system setup PROGRESSIVE SCAN This function is available when video output is component. This setting enables you to select a desired progressive mode. To view ‘Progressive scan mode’, first connect the component cable. (See page 23) Be sure the Component cables are connected properly.
Dolby Digital (DVDs only) Selects the type of Dolby Digital signal. • D-PCM : Select this when the recorder is connected to an audio component that does not have a built-in Dolby Digital decoder. • Dolby Digital : Select this when the recorder is connected to an audio component with a built-in Dolby Digital decoder. DTS (DVD VIDEOs only) • On : Select this when the recorder is connected to an audio component with a built-in DTS decoder.
system setup Scan Audio (DVDs only) • On : Outputs audio signals during FF1 fast-forward of a DVD disc with Dolby Digital soundtracks. • Off : Turns off the function. No sound is output during FF1 fast-forward. Timer Edit Dubbing M Sound will be interrupted during Scan Audio. If the audio format is LPCM, this function is not supported.
SETTING UP THE FEATURES This function allows you to setup the Features setting. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER button. 3. Press the ▲▼ buttons to select Features, then press the ENTER button. 5. Press the ▲▼ buttons to select the desired item, then press the ENTER button.
system setup EZ Record This function allows you finalize a disc automatically. KLCV (V-mode) 1. Press the ▲▼ buttons to select EZ Record, then press the ENTER button. 2. Press the ▲▼ buttons to select On, then press the ENTER button. Press the EXIT button to exit the menu. You can operate EZ Record by using EZ REC MODE button on the remote control. 3. Insert a disc. If the disc is a new DVD-RW, it is initialized to V mode automatically.
• You can operate the DVD Recorder & VCR by using TV remote control. (TV buttons that can be used to control the DVD Recorder & VCR : , , , , , , and , buttons, ~ button) • When you press Anynet+ button on the TV remote control, the OSD to the right will appear. DVDR View TV Recording : DVDR DVDR Menu DVDR Operation Receiver : Off Setup Enter Move eExit - DVDR Menu : Same as MENU button ( ) on the DVD Recorder & VCR remote control.
system setup SETTING UP THE PARENTAL The Parental function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER button. 3. Press the ▲▼ buttons to select Options, the press the ENTER button. 4. Press the ▲▼ buttons to select Parental, then press the ENTER button.
Changing the Password 1. Press the ▲▼ buttons to select Change Password, then press the ENTER button. The "Enter your password" message will be displayed. 2. Enter a new 4-digit password using the number buttons on the remote control. The “Confirm the password” message will be displayed.
system setup VCR FUNCTION SETTING This function allows you to set up the VCR. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER button. 3. Press the ▲▼ buttons to select Features, then press the ENTER button. 4. Press the ▲▼ buttons to select VCR Function, then press the ENTER button. 5. Press the ▲▼ buttons to select the desired VCR option below, then press the ENTER button. 6.
SET TOP/CABLE BOX CONTROL If you have your Set top/Cable box or satellite receiver connected as shown on page 19, it can be controlled after setting up this menu. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 3. Press the ▲▼ buttons to select Features, then press the ENTER button. Features menu will be displayed. 4. Press the ▲▼ buttons to select Set Top Box Control, then press the ENTER button. Set Top Box Control menu will be displayed. 5.
system setup SET TOP/CABLE BOX/SATELLITE RECEIVER BRAND CODE TABLE Set top/Cable box brand Set top/Cable box brand Code number Set top/Cable box brand Code number 3M ABC 0033 0003, 0011, 0017, 0008, 0014, 0007, 0001, 0013, 0206, 0047, 0237, 0033 0003, 0013, 0047, 0001, 0011, 0017, 0014, 0206, 0007 1102, 0237 0237 0237, 1102 0015 0315, 0153 0008, 0277, 0144, 0056 0060 0899 0207, 0022 0211, 0111 0770 0014, 0011, 0003, 0476 0153, 0022, 0207, 0039, 0797, 0237, 0260 1080 1269 0267 0276 0056, 0022 0014 0641
Code number Set top/Cable box brand Code number Myrio NET Next Level Nexus Northcoast Nova Vision Novabeam Novaplex 1117 0274 0764, 1316, 1315, 1314 0770 0671, 0314 0277, 0008 0277 0618, 0277, 0017, 0008 0156, 0070, 0203, 0063, 0400, 0012, 0618, 0022, 0637, 0010, 0044 0019, 0007, 0303, 0248, 0017 0015 0371 0021 0008,0237,0277,0477,0877, 1877,0810,1376,1476 0843 0107, 0021, 0144, 0008, 0124, 0307, 0000, 0040 0637 0000, 0525, 0008 0637, 0000 0025, 0031, 0290, 0027, 0030, 0153, 0060, 0242, 0028, 0334, 0211
system setup Satellite receiver brand Satellite receiver brand Code number Satellite receiver brand Code number AlphaStar Atlantic Telephone Bell ExpressVu Century Chaparral Crossdigital 0772 1333 0775 0856 0216 1109 1887, 0749, 0566, 0392, 1749, 0099, 1109, 1076, 1442, 1856, 0247, 1142, 1639, 0724, 0639, 0775, 1005, 1170 0775, 1005 0775, 1170, 1005 0775 0863 0566 0361, 0869, 0627 0775 0856 0819, 0749 0775 0775 0749, 1749, 1442, 1142 1176, 1359, 1048, 0863, 0283 0099 0361, 0036, 0627 0775, 1170 0722, 0
CH Digit Lock Select the sub item(Off or Lock to two digits) using the ▲▼ buttons, then press the ENTER button. • Off : Select this when your Set top/Cable box or satellite receiver only accepts three or more digit channel numbers. Normally select this. • Lock to 2 digits : Select this when your Set top/Cable box or satellite receiver only accepts a two digit channel number. 12:00 AM Set Top Box Control Title List Timer Edit Brand Code : 0000 Connections : AV1 Ch.
playback This section introduces basic functions of playback by disc type. Read the following information before playing a disc. REGION CODE (DVD-VIDEO ONLY) Both the DVD Recorder & VCR and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this DVD Recorder & VCR is described on the rear panel of the DVD Recorder & VCR.
DISC TYPES THAT CAN BE PLAYED Disc Types DVD-VIDEO Disc Logo Recorded content VIDEO AUDIO AUDIO JPEG JPEG Image MP3 MP3 Audio Single sided(5”) Double sided(5”) Single sided(3.5”) Double sided(3.5”) Single sided(5”) Single sided(3.5”) Single sided(5”) Single sided(3.5”) Single sided(5”) Single sided(3.5”) ● PLAYBACK AUDIO-CD Disc Shape or minute Single sided(5”) (4.7GB) DVD-RAM VIDEO AUDIO Double sided(5”) (9.4GB) DVD-RW VIDEO AUDIO 5” (4.7GB) Single Layer(5”) (4.
playback Discs That Cannot be Played • • • • • • DVD-Video with a region number other than “1” or “ALL” 3.9 GB DVD-R Disc for Authoring. A DVD-RW(V)/-R(V)/+R disc which has been recorded and not finalized in a different manufacturer's recorder. PAL discs DVD-ROM/PD/MV-Disc/Divx Video Disc, etc. Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I M This DVD Recorder & VCR can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
USING THE DISC MENU AND TITLE MENU Some discs contain a dedicated menu system that allows you to select special functions for title, chapters, audio track, subtitles, film previews, information on characters, etc. For DVD-VIDEO Discs Z Title Menu : Press the TITLE MENU button to move to the title menu of the disc. • Use this button if the disc contains more than one title. Some discs may not support the title menu functionality.
playback Skipping Chapters or Tracks ZXCVBKL During playback, press the l◄◄ or ►►l button on the remote control. • If you press the l◄◄ button If you press the l◄◄ button, it moves to the beginning of the chapter or track. Pressing the button once again within 3 seconds returns to the beginning of the previous chapter or track. • If you press the ►►l button If you press the ►►l button, it moves to the next chapter or track. Skipping Ahead 30 Seconds ZXCVKL During the playback, press F.
USING THE ANYKEY BUTTON The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter, track and time. You can also change the subtitle and audio settings and set some features including Repeat, and Angle. Moving to a desired scene directly If you want to move to a certain title, chapter or time, use this function. 1. Press the ANYKEY button during playback. 2. Press the ▲▼ buttons to select Title, Chapter or Time. 3.
playback REMAIN You can check the remaining time of the current title. 1. Press the ANYKEY button during playback. Title 2/6 Chapter 3/12 Time 00:00:52 Audio ENG Dolby D 2ch(1/1) Remain 00:00:52 Subtitle ENG Angle 1/1 >Move SELECTING THE SUBTITLE LANGUAGE Z This enables you to select the available subtitle languages on a disc. Subtitle languages may not work depending on the disc type. This is only available during playback.
PLAYING BACK AN AUDIO CD (CD-DA)/MP3 Buttons on the Remote Control Used for Audio CD(CD-DA)/MP3 Playback ● PLAYBACK # button : Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD Recorder & VCR moves to and plays the previous track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning.
playback Playing an MP3 Disc 1. Insert an MP3 disc into the disc tray. • The menu is displayed 2. Press the ▲▼ buttons to select Music, then press the ENTER button. 3. Press the ▲▼ buttons to select the track you want to hear, and then press the ENTER button. MP3 Screen Elements Music 12:00 AM (( )) Surround : Off Q SONG01.MP3 E\ ♫ 1/15 > Move M Play 00:00:19 q♫ SONG01.MP3 ♫ SONG02.MP3 ♫ SONG03.MP3 ♫ SONG04.MP3 ♫ SONG05.MP3 ♫ SONG06.
• Press the ANYKEY button to display the menu bar. • Press the ANYKEY button again to clear the menu bar. M If select the Photo, JPEG files will only be displayed. If there are no JPEG files, empty folder will only be displayed. Music/Photo Simultaneous Playback 2. Press the ▲▼ buttons to select MIX, and then press the ENTER button. The track list will be displayed. 3. Press the ENTER button. The message "Do you want to view the photo with MP3?" will be displayed. Music )) Surround : Off Q SONG01.
playback Slow motion In Pause mode, press ( ) button for slow motion. Press the ( ) button repeatedly to play slow motion at 1/10, 1/7, 1/5 normal speed. Press the PLAY button twice to resume normal viewing. S-VHS Playback The DVD Recorder & VCR allows you to playback high quality S-VHS tapes. 1. Insert an S-VHS tape into the VCR deck. 2. Press PLAY ( ) button on the remote control or on the front panel to play an S-VHS tape.
recording This section explains various DVD recording methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. RECORDABLE DISCS ● RECORDING This recorder can record on the following discs. DVD-RAM DVD-RW DVD-R DVD+RW DVD+R • DVD±RWs and DVD-RAMs are rewritable. • DVD±Rs are non-rewritable.
recording M Finalize - This closes the DVD-RW/±R so no additional recording can be done. - The DVD-RAM/+RW disc cannot be finalized. Unfinalize - This allows additional recording on a DVD-RW disc originally recorded on the DVD-VR375. - A DVD-RW disc that has been recorded by DAO(Disc At Once) on a PC cannot be unfinalized. - A DVD-RW disc that has been recorded in Video Mode of a different manufacturer's recorder cannot be unfinalized. - A DVD±R disc cannot be unfinalized.
UNRECORDABLE VIDEO Pictures with copy protection cannot be recorded on this DVD Recorder & VCR. When the DVD Recorder & VCR receives a copy guard signal while recording, recording stops and the following message (to the left) appears on the screen. You cannot record copy protected movie. TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never.
recording RECORDING IMMEDIATELY KLXCV Before you start 1. Make sure the antenna cable is connected. 2. Press the OPEN/CLOSE button and place a recordable disc on the disc tray. 3. Check the remaining time on the disc. DVD-RAM/DVD±RW/+R discs should be formatted or initialized in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording. 4. Press the OPEN/CLOSE button to close the disc tray.
M You can not change the recording mode and the program while recording. Recording will stop automatically if there is no free space left on the disc. Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, up to 49 titles onto a DVD+RW/+R disc. If the power interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc. Recording will stop automatically if a copy protected image is selected. Do not use DVD-R authoring discs with this unit.
recording MAKING A ONE TOUCH RECORDING (OTR) One-Touch Recording (OTR) allows you to add recording time in preset increments up to 8 hours by pressing the REC button repeatedly. XCVKL 1. If you want to record through a connected external component, press the INPUT SEL. button to select an appropriate external input (AV1, AV2 or DV). 2. Press the DVD or VCR button on the remote, or DVD/VCR on the front panel to select the DVD or VCR mode. 3. Press the REC button to start recording. 4.
• Media : Select the media to record (DVD or VCR). • Date : Date that the timer recording starts - Sets the date using ▲ button. - To record the same program every day or the same day every week, press ▼ button. see below : 1month later Sat Timer-Standard 12:00 AM No. Media Date Start End Ch Mode Edit No.
recording M The timer recording time may differ from the set time depending on disc status and overall timer recording status (for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start time of the next recording.) EDITING THE TIMER LIST Follow these directions to edit the timer record list. XCVKL 1. Press the MENU button. 2. Press the ▲▼ button to select Timer, then press the ENTER button. 3.
BASIC VCR RECORDING Before starting Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the ● (REC) button. You can even add time in preset increments up to 4 hours by pressing the ● (REC) button repeatedly. Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. J Warning : Do not cover this opening unless you are sure you want to record over the tape.
recording CHECK REMAINING TIME Press the INFO button on the remote control. The following information will be displayed. (Current deck status, recording speed, remaining time, input channel, current time.) DVD-RAM Stop 00:00:00 LSP Rem 02:00 AV 1 VCR Stop 00:00:37 SP Rem 01:59 AV 2 SPECIAL RECORDING FEATURES While a recording is in progress, you can watch a DVD or VCR. (for example, you can watch VCR playback while recording from a DVD and vice-versa) 1.
Dubbing from DVD to VCR XCVKL 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Dubbing, then press the ENTER button. 3. Press the ▲▼ buttons to select Simple Dubbing, then press the ENTER button. Timer 4. Press the ▲▼ buttons to select DVD ➞ VCR, then press the ENTER button. The Message "Do you want to copy DVD contents to Video?" will be displayed. Dubbing Direct dubbing DVD to VIDEO • • • • Insert a DVD disc you want to dubbing. Insert a VHS tape.
recording DV/D8 DUBBING Before DV Dubbing, connect the DV output jack of camcorder to the DV input jack of DVD Recorder & VCR using a DV cable. 1. With the unit in Stop mode, press the MENU button in stop mode. Dubbing Title List 2. Press the ▲▼ buttons to select Dubbing, then press the ENTER button. 3. Press the ▲▼ buttons to select DV/D8 Dubbing, then press the ENTER button.
editing This section introduces basic functions of DVD editing and explains both edit functions for recording on a disc and edit functions for the entire disc. PLAYING THE TITLE LIST XCVKL 1. Press the TITLE LIST button. The Title List screen is displayed. ● EDITING Follow these instructions to play back a scene from the Title List. 2. Press the ▲▼ buttons to select a Title, then press the ENTER button. 3. Press the ▲▼ buttons to select Play to play the title list, then press the ENTER button.
editing BASIC EDITING (TITLE LIST) Changing the Name of a Title (Title Name) Follow these instructions to rename a title list name, i.e., to edit the title of a recorded program. XCVKL 1. Press the TITLE LIST button. The Title List screen is displayed. Sports(A1) 2. Press the ▲▼ buttons to select a title you want to rename from the Title List, then press the ENTER button. 3. Press the ▲▼ buttons to select Title Name, then press the ENTER button. The Title Name screen is displayed. 4.
Erasing a Title (Title Erase) Follow these instructions to delete a title from the Title List. XCVKL 1. Press the TITLE LIST button. The Title List screen is displayed. DVD -RAM Title List (Original) 12:00 AM 1/1 Do you want to erase "No.01"? (If you have created a Playlist or Dubbing list with this title, part of that Playlist or Dubbing list will also be erased.) 3. Press the ▲▼ buttons to select Title Erase, then press the AV1 4 Jan/01/2008 ENTER button.
editing M You can also erase chapters from a Playlist title. If you erase an original title used in a Playlist, that Playlist is also erased. Erasing a section of a Title (A-B Erase) Follow these instructions to erase a section of a Title List entry. XCVK (VR mode) 1. Press the TITLE LIST button. The Title List screen is displayed. DVD -RAM A-B Erase 12:00 AM Title No. 03 2. Press the ▲▼ buttons to select a title you want to edit from the Title List, then press the ENTER button. 3.
M The length of the section to be deleted must be at least 5 seconds long. End point cannot be marked earlier than start point. The section cannot be deleted when it includes a still picture. Dividing a title into two (Divide Title) XCVK (VR mode) 1. Press the TITLE LIST button. The Title List screen is displayed. DVD -RAM Divide Title (Original) 12:00 AM Title No. 01 2. Press the ▲▼ buttons to select a title you want to divide from the Title List, then press the ENTER button. 3.
editing • The image and time at the start point are displayed on the Start window. • Select the starting point of the section from which you want to create a new scene using the playback related buttons. • Playback related buttons : ( , , , , , ) 5. Press the ENTER button at the end point. • The image and end point time are displayed in the End window. DVD -RAM Start End Start 00:00:01 Make Title No. 01 00:00:01 ► Finish Playlist No.
Changing the Name of a Playlist Follow these instructions to rename a playlist title, i.e. to edit the title of a playlist title. XCV (VR mode) 1. Press the TITLE LIST button with the disc stopped, then press the PLAY LIST button. The Edit Playlist screen is displayed. 3. Press the ▲▼ buttons to select Title Name, then press the ENTER button. The Title Name screen is displayed. 4. Enter the desired characters using the ▲▼◄ ► buttons. • Back Space : Moves the cursor one position backwards.
editing DISC SETTING Menu items may vary, depending on the existence of a recorded title. Editing the Disc Name Follow these instructions to give a name to a disc. XCVKL 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Setting, then press the ENTER button. 3. Press the ▲▼ buttons to select Disc Name, then press the ENTER. The Disc Name screen is displayed. 4. Enter the desired characters using the ▲▼◄ ► buttons.
Formatting a Disc Use these instructions to format a disc. Disable disc protection before formatting. XCK 1. With the unit in Stop mode, press the MENU button. 3. Press the ▲▼ buttons to select Disc Format, then press the ENTER button. DVD+RW • You will be prompted with the confirmation message 'All of the data will be erased (even protected titles). Do you want to format this disc?'. DVD-RAM/-RW • You will be prompted with the confirmation message ‘Select the recording format.
editing Finalizing a Disc After you record titles onto a DVD-RW/DVD±R disc with your DVD Recorder & VCR, it needs to be finalized before it can be played back on external devices. CVL 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Setting, then press the ENTER button. 3. Press the ▲▼ button to select Disc Finalize, then press the ENTER button. You will be prompted with the message 'Do you want to finalize this disc?'.
Disc Information XCVLK 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Setting, then press the ENTER button. 12:00 AM VR Mode Media DVD-RAM Title No. Original 1 / Playlist 0 Format Protected Not Protected Date 1.03.2008 ~ --.--.---- Remainder HQ : 0H59M HSP : 1H29M SP : 2HOM LSP : 2H29M ESP : 2H59M LP : 4H0M EP : 6H1M SLP : 8HOM 4.6 / 4.7GB rReturn eExit Erase All Titles ● EDITING 3.
reference TROUBLESHOOTING (DVD-VIDEO/DVD-RAM/DVD±RW/DVD±R) If your product malfunctions, go through the check points below before contacting Samsung customer service. PROBLEM No power. The input is displayed for a while when the power turns on. EXPLANATION/SOLUTION • Check whether the power cord is securely plugged into the power outlet. • Did you press the power button of your DVD Recorder & VCR. • The DVD Recorder & VCR requires some time to initialize after it is turned on.
TROUBLESHOOTING (DVD) PROBLEM icon appears on the screen. EXPLANATION/SOLUTION You cannot use the operation or function due to one of the following reasons: (1) Your DVD disc does not support the feature (for example, angles) (2) You've requested a title, chapter, or scan time that is out of the correct range. The disc does not support all the selected functions. In this case, some settings you configure on the Setting menu may not work properly. Cannot change the aspect ratio.
reference TROUBLESHOOTING (VCR) Before contacting Samsung customer service, perform the following simple checks. PROBLEM No power EXPLANATION/SOLUTION • Check that the power plug is connected to a wall outlet. • Have you pressed the POWER button? You cannot insert a video cassette • A video cassette can only be inserted with the window side up and the safety tab facing you.
PROBLEMS AND SOLUTIONS (DISPLAY ERROR MESSAGE) Before contacting a Samsung authorized service center, perform the following simple checks. PROBLEM You cannot record a copy protected movie. EXPLANATION/SOLUTION • You can’t record the video since it is protected by copyright. You cannot record. This disc is protected. This disc cannot be renamed (the disc is protected). • The disc you are using is protected. To record on this disc or use this function, cancel the disc protection function.
reference PROBLEMS AND SOLUTIONS (DISPLAY ERROR MESSAGE) PROBLEM EXPLANATION/SOLUTION Error is detected on the disc. • You can’t use the disc because it contains errors from previous recordings. Use the disc after formatting. System error is found. Please try it again after turning off the power. • When operating, errors happen. Turn off the device. (To turn off, press and hold the power button on the front of the device for 10 seconds.
appendix SPECIFICATIONS 120V AC, 60Hz Power consumption 25 Watts Weight 9.7 lb Dimensions 16.9In(W) x 13.0In(D) x 3.1In(H) Operating temp. +41°F to +95°F Other conditions Keep level when operating. Operate in less than 75% humidity Video 1.0 V p-p at 75Ω load, sync negative Max. Audio Input Level 2Vrms DV Input IEEE 1394(4p) compatible jack ● APPENDIX Power requirements General Input Audio output jacks 1, 2 Coaxial digital audio output support Audio Min.
SAMSUNG DVD RECORDER & VCR LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CZECH REPUBLIC DENMARK FINLAND Europe CIS Asia Pacific Middle East & Africa 01613A-01-VR375-XAA-ENG.
HEADQUARTERS 105 Challenger Road, Ridgefield Park, N.J.07660-0511 TEL: 1-800-SAMSUNG SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (726-7864) www.samsung.com Code No. AK68-01613A-01 01613A-01-VR375-XAA-ENG.
