DVD-SH893M DVD-SH895M DVD-SH897M DVD user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.
Line through writing Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Precaution Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
Line through writing Maintenance of Cabinet For safety reasons, be sure to disconnect the AC power cord from the AC outlet. ~ Do not use benzene, thinner, or other solvents for cleaning. ~ Wipe the cabinet with a soft cloth. HDD (Hard Disk Drive) The hard disk has a high storage density, which enables long recording durations and quick access to written data. However, it can easily be damaged by shock, vibration or dust and should be kept away from magnets.
~ Keep in a clean protection jacket. ~ If you move your HDD & DVD Recorder suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. Disc Specifications Disc Type ❖ DVD-Video ~ A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32 subtitle languages.
Line through writing ~ If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost. ~ A DVD-RW blank disc is initialised to VR Mode when first initialised. ❖ DVD+RW Disc Playback and Recording ~ With DVD+RW discs, there is no difference between DVD-Video format(Video mode) and DVD-Video Recording format(VR mode). ~ Finalising is generally unnecessary when using a DVD+RW disc.
COPY PROTECTION • Many DVD discs are encoded with copy protection. • This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation.
Line through writing Do not use the following discs! ~ LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product. [Note] Disc types that can be played : CD/CD-R/-RW/MP3/JPEG/DVD-Video/DVD-RAM/±RW/±R. For a DVD-RW/±R disc, which has been recorded in Video Mode on another component, it can play only when finalised. ~ Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.
~ Target Peripheral List (TPL) Since this product is not a Windows XP but an embedded USB host system, naturally the supported USB devices cannot help being limited. The USB host functionality and compatibility of this product have been proved with following items.
Line through writing Line through writing 2 3 12 13 14 16 18 21 Warning Precaution General Features Before reading the user’s manual How to use the HDD & DVD Recorder Unpacking Description Tour of the Remote Control connecting & setting up 22 23 24 29 31 32 Connecting the HDD & DVD Recorder Additional connections Other TYPES of connections with the Video Output Cable Other TYPES of connections with the Audio Output Cable Connecting HDMI/DVI to a TV Connecting to AV IN 3, DV input jack Connecting to US
playback recording 69 70 71 73 73 75 76 76 77 79 82 Recordable Discs Recording Formats Recording Mode Unrecordable pictures Recording immediately Copying from a Camcorder Making a One Touch Recording (OTR) Simultaneous Recording and Playback Time Shift function as a live signal Making a Timer Recording Go To Recorded List editing 84 88 88 89 90 95 Basic Editing (Title List) Using the Sort function (Title List) Navigation Menu Select Contents Advanced Editing (Playlist) COPYING FROM HDD TO DVD OR VICEV
Line through writing General Features This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD. You can also edit digital images on DVD-RAM/±RW discs or HDD. HDD Recording ~ DVD-SH893M You can record up to Approx. 264 hours of video (in EP 8 Hr mode) on the internal 160 GB (gigabyte) hard disk (HDD). ~ DVD-SH895M You can record up to Approx. 421 hours of video (in EP 8 Hr mode) on the internal 250 GB (gigabyte) hard disk (HDD).
EPG functions EPG is an Advanced Electronic Programme Guide. With a Remote Control Unit, you can operate full function. It has a Auto and Manual Scan facility and Channel Organizing (programmable) facility. USB Interface for Data Transfer You can transfer JPEG, MP3 and DivX file of the MP3 player, USB memory or digital camera to a HDD & DVD RECORDER using the USB interface.
Line through writing How to use the HDD & DVD Recorder Step 1 : Select the disc type or HDD Please check available disc type before recording. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVD±R. You can record files directly to the built-in HDD or edit a recorded file.
Step 4 : Playing You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections, called titles, and sub- sections, called chapters. Step 5 : Editing a recorded disc Editing on discs is easier than conventional video tapes. The HDD & DVD Recorder supports many different edit functions, possible only with DVDs and HDD.
Line through writing Unpacking Accessories Check for the supplied accessories below. Video/Audio Cable RF Cable for TV Remote Control Batteries for Remote Control (AAA Size) Instruction Manual Quick Guide Preparing the Remote Control Install Batteries in the Remote Control ~ Open the battery cover on the back of the remote control. ~ Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly. ~ Replace the battery cover.
• Controllable TV Codes BUTTON BRAND BUTTON 01, 02, 03, 04, 05, 06, 07, 08, 09 NOBLEX 66 AIWA 82 NOKIA 74 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 NORDMENDE 72, 73, 75 BANG & OLUFSEN 57 PANASONIC 53, 54, 74, 75 BLAUPUNKT 71 PHILIPS 06, 55, 56, 57 BRANDT 73 PHONOLA 06, 56, 57 BRIONVEGA 57 PIONEER 58, 59, 73, 74 06, 56 CGE 52 RADIOLA CONTINENTAL EDISON 75 RADIOMARELLI 57 DAEWOO 19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 RCA 45, 46 EMERSON 64 REX 74 FERGU
Line through writing Description Front Panel (DVD-SH893M/895M/897M) DISPLAY Displays the playing status, time, etc. OPEN/CLOSE button Opens and closes the disc tray. SEARCH/SKIP buttons Goes to the next title/chapter/track or goes back to the previous title/chapter/track. ( Playback mode) Select TV preset channels. (Stop mode) PLAY/PAUSE button Plays a disc or pauses playback. STOP button Stops disc playback. REC button Starts recording. HDD/DVD button Selects HDD/DVD mode.
Rear Panel The fan always revolves when the power is on. Ensure a minimum of 10 cm clear space on all sides of the fan when installing the product. In from aerial connector Connects RF cable from antenna. VIDEO OUT Connects the input of external equipment using a Video cable. AV2(EXT) INPUT SCART Connector Connects to equipment having SCART output jack. HDMI OUT Connects to equipment having HDMI input. DIGITAL AUDIO OUT(OPTICAL) Connects to an amplifier having a digital optical audio input jack.
Line through writing Front Panel Display In Disc Indicator Lights status icon. DVD VIEW Indicator Lights when DVD mode is selected. HDD VIEW Indicator Lights when HDD mode is selected. USB VIEW Indicator Lights when USB mode is selected. TIMER Indicator Lights to indicate the timer record mode. HDMI Indicator Lights to indicate when HDMI is connected and HDMI resolution status. REC Indicator Lights in the record mode. STATUS Indicator Playing time/clock/current status indicator.
Tour of the Remote Control Your HDD & DVD Recorder remote control will work with Samsung televisions and compatible brands. Installing batteries in the Remote Control Lift the cover at the back of the remote control upward as shown. 2. STANDBY/ON button SOURCE button Select input signal in external input mode (PROG, AV1, AV2, AV3 or DV input). DTV/ANALOGUE button Select Digital/Analogue broadcasting. Install two AAA size batteries.
Connecting & Setting up Connecting the HDD & DVD Recorder This section involves various methods of connecting the HDD & DVD Recorder to other external components and required initial setting modes. You can connect your HDD & DVD Recorder to the television using the SCART cable if the appropriate input is available on the television. 1. Connect the RF cable as shown. 2. Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD Recorder. 3.
Additional connections You can connect your HDD & DVD Recorder to a External device (VCR/Satellite receiver). SCART cable (not included) External device (VCR/Satellite receiver) 1 - DVD mode 1. Connect the AV2 connector of HDD & DVD Recorder and External device (VCR/Satellite receiver) using a SCART cable. 2. Connect the AV1 connector to the SCART AV connector on the TV. 3. Turn on the HDD & DVD Recorder, External device (VCR/Satellite receiver) and TV. 4. Set Input mode on AV2. - TV mode 1.
Connecting & Setting up Other TYPES of connections with the Video Output Cable There are several ways to output video signal not using scart cables. Select one of the following video connections that best suits you below. ~ Case 1 : Connecting to a Video (Composite) output jack ~ Case 2 : Component Video output jacks Component video and Progressive Output Modes ~ Component video output is available only if your TV supports Component video input.
Case 2 : Component Video output jacks You will enjoy high quality and accurate colour reproduction images. 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y, PB, PR) jacks on HDD & DVD Recorder and COMPONENT IN(Y, PB, PR) jacks on your TV. 2. Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD Recorder and AUDIO IN jacks on TV (or AV amplifier). (See pages 26~28). 3. After connecting, refer to the page 44.
Connecting & Setting up Other TYPES of connections with the Audio Output Cable There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below. ~ Case 1 : Connecting to your TV ~ Case 2 : Connecting to a stereo amplifier with AV output jacks ~ Case 3 : Connecting to an AV amplifier with a digital output jack Manufactured under licence under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending.
Case 2 : Connecting to a stereo amplifier with AV output jacks If your stereo amplifier only has AUDIO INPUT jacks (L and R), use the AUDIO OUT jacks ● connecting & setting up Audio cable Red White Front(L) speaker Front(R) speaker English _27
Connecting & Setting up Case 3 : Connecting to an AV amplifier with a digital output jack If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings. According to your amplifier, connect to an optical cable.
Connecting HDMI/DVI to a TV If your TV has a HDMI/DVI input, connect HDMI/DVI Adapter cable to a TV. You will enjoy high quality images. ~ Case 1 : Connecting to a TV with HDMI Jack ~ Case 2 : Connecting to a TV with DVI Jack Case 1 : Connecting to a TV with HDMI Jack HDMI-HDMI cable (not included) M ` If the HDD & DVD Recorder is connected to your TV in HDMI 1080p output mode, you must use High speed(category2) HDMI cable.
Connecting & Setting up Case 2 : Connecting to a TV with DVI Jack ~ Using a DVI Adapter cable (not supplied), connect the HDMI OUT jack on the rear of the HDD & DVD Recorder to the DVI IN jack of your TV. ~ Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the HDD & DVD Recorder to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD Recorder and TV.
` HDMI connection description HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data). - Though the HDD & DVD Recorder uses a HDMI cable (not supplied), the HDD & DVD Recorder outputs only a pure digital signal to the TV. - If TV does not support HDCP (High -bandwidth Digital Content Protection), snow noise appears on the screen.
Connecting & Setting up Case 2 : Connecting a Camcorder to the DV IN jack If your digital camcorder has a DV output jack, connect it to the DV input jack of your HDD & DVD Recorder. Camcorder M ` If the input is not selected automatically, use SOURCE button to select proper input. Connecting to USB Devices This allows you to connect your HDD & DVD RECORDER to USB devices. Connecting a USB memory, MP3 player, Digital Camera to the USB HOST.
system setup On-Screen Menu Navigation 1. $%, _ + buttons Press these buttons on the remote control to move the selection bar $%, _ + to cycle through the menu options. . OK button Press this button on the remote control to confirm any new settings. . RETURN button Press this button on the remote control to return to the Previous menu screen displayed or to exit the on-screen menu.
System setup . Press the OK or ► button, then Daylight Saving Time option display. Press the $% buttons to select On or Off, then press the OK button. . Press the % button to select OK, then press the OK button. Digital auto scan will be started. Initial Installation Country : United Kingdom ► Language : English ► Time Zone : GMT + 00:00 Off : Off On Daylight Saving Time 10. After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds.
Clock Set 1. With the unit in Stop mode, press the MENU button. HDD & DVD RECORDER . Press the $% buttons to select Setup, then press the OK or ► button. . Press the $% buttons to select Clock Set, then press the OK or ► button. Setup HDD Library Guide Channel Timer Record Disc Manager Setup ► Clock Set ► Language ► Audio ► Video ► Parental Lock 1 ► Recording ► sSELECT rRETURN eEXIT Time Zone To setup, follow steps 1~3. .
System setup Daylight Saving Time To setup, follow steps 1~3 on page 35. . Press the $% buttons to select Daylight Saving Time, then press OK or + button. HDD & DVD RECORDER Clock Set HDD Library . Select the Off or On using the $% buttons, then press the OK or + button.
Manual Scanning (Digital) To tune-in new channels, the HDD & DVD Recorder has been provided with the option Manual Scan where the channel data can be entered by user. To setup, follow steps 1~2 on page 36. . Press the $% buttons to select Manual Scanning (Digital), then press OK or + button.
System setup Channel List (Digital) This function is possible in DVB-T mode only. This function is used to edit the favourite channel list or delete the channel. To setup, follow steps 1~2 on page 36. . Press the $% buttons to select Channel List (Digital), then press OK or + button. . To delete a channel from the Channel List (Digital), press the RED(A) button. Press the OK button to watch that channel.
Setting up the System Options This function allows you to setup the system setting. 1. With the unit in Stop mode, press the MENU button. . Press the $% buttons to select Setup, then press the OK or + button. . Press the $% buttons to select System, then press the OK or + button. . Press the ▲▼ buttons to select the desired item, then press the OK or + button.
System setup For using Anynet+ (HDMI CEC) 1. Connect the HDD & DVD Recorder to a Samsung TV with an HDMI cable. (See pages 29~30) 2. Set the Anynet+ (HDMI CEC) to “On” on your HDD & DVD Recorder. (See page 39) 3. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) ~ You can operate the HDD & DVD Recorder by using TV remote control. (TV buttons that can be used to control the HDD & DVD Recorder : , , ~ , REC and colour buttons.
DivX(R) Registration Please use the Registration code to register this HDD & DVD Recorder with the DivX(R) Video On Demand format. For more information, visit www.divx.com/vod HDD & DVD RECORDER System HDD Library Auto Power Off : Off ► Video On Demand Save : Off GuideDivX(R)Power Anynet+ (HDMI CEC) : Off Channel Your registration code is XXXXXXXX Auto Subtitle : On To DVB-T learn more visit www.divx.
System setup Setting up the Audio Options You can connect the HDD & DVD Recorder to an external amp or Home theatre. Allows you to setup the Audio device and sound status depending on the audio system in use. You can also set NICAM mode. 1. With the unit in Stop mode, press the MENU button. . Press the $% buttons to select Setup, then press the OK or + button. . Press the $% buttons to select Audio, then press the OK or + button. .
NICAM HDD & DVD RECORDER Audio HDD Library Guide Channel Timer Record Digital Output : PCM ► DTS : Off ► DRC : On ► Off : On On NICAM ► ✔ Disc Manager Setup m MOVE sSELECT rRETURN eEXIT ● system setup NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.
System setup Video Output You can enjoy high quality image through RGB or Component video connections. RGB video output is available connecting scart jack (AV1) and component video output is available connecting component (Y, PB, PR) jack. Only one of these signals can be selected at one time.
BD Wise (Only Samsung products) BD Wise is Samsung’s latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically.
System setup Setting up the Parental Lock The Parental Lock function works in conjunction with DVDs and DVB-T that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. Z 1. With the unit in Stop mode, press the MENU button. . Press the $% buttons to select Setup, then press the OK or + button. . Press the $% buttons to select Parental Lock, then press the OK or + button.
Setting up the Recording Options Automatic Chapter Creator CVKL (V-mode) ► ► ► ► . Press the REC button to start recording. (See page 71 about how to set recording speed) The message “Do you want to create the chapter menu after this recording?” is displayed. . Press the _ + buttons to select OK, then press the OK button. ~ A new chapter is created according to the selected recording mode. A chapter will be about 5 minutes long in XP and SP, and about 15 minutes long in LP and EP mode. .
System setup EZ Record CVKL (V-mode) This function enables you to initialise and Finalise a disc automatically. 1. Press the ▲▼ buttons to select EZ Record, then press the OK or + button. HDD & DVD RECORDER Recording HDD . Press the ▲▼ buttons to select On, then press the OK or + button. Press the EXIT button to exit the menu. Library Guide Channel Timer Record . Insert a disc. If the disc is new, It is initialised to V mode automatically.
DTV functions Basic Functions Display Screen Banner Elements Displays the favourite channel. HDD DTV 001 Displays the teletext. TF1 Displays the subtitle. Displays the multi audio. M ` The icon is displayed according to the service information of signal. ` The icon is displayed only with more than one audio type and language. ` By pressing the button, you can see the detailed information. Select Audio Track 1. Press the AUDIO button to see the Audio track list. .
DTV functions Changing the Subtitle Language When the current broadcasting programme provides subtitle, press the SUBTITLE button . If Subtitle is available on current programme, menu bar is displayed on the upper side. Subtitle OFF 1. Press the SUBTITLE button. . Press the ▲▼ buttons to select a desired subtitle, then press the OK button. >Change Using the digital text service When the current broadcasting programme provides teletext, press the TEXT button to see the teletext. B B C 1.
Guide Timer Recording Make sure that clock must be set before operating this function. (see pages 35~36) 1. Press the ▲▼◄ ► buttons to select desired programme, then press RED(A) button. 12:00 - 12:25 Blue Peter TUE 1 JAN 001 BBC ONE 002 BBC TWO 007 BBC THREE 030 CBBC Channel 040 BBC NEWS 24 001 BBCi A ◄ 12:30 --- The Weakest Link Basli Brush ` You can check the setting in the scheduled List. (see pages 78~79) ` The title information is displayed in the Title List as for Guide REC.
Playback This section introduces basic functions of playback and playback by disc type. Read the following information before playing a disc. Region code (DVD-Video only) Both the HDD & DVD Recorder and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this HDD & DVD Recorder is described on the rear panel of the HDD & DVD Recorder.
Disc Types Disc Logo content Recorded content AUDIO DVD-RW VIDEO VIDEO AUDIO DVD+RW VIDEO AUDIO DVD+R DVD+R DVD+ReWritable VIDEO 12cm (4.7GB) Single Layer(12cm) (4.7GB) Dual Layer(12cm) (8.5GB) 12cm (4.7GB) Single Layer(12cm) (4.7GB) Dual Layer(12cm) (8.5GB) Max.
Playback Playing a Disc 1. Press the OPEN/CLOSE button. . Place a disc gently into the tray with the disc’s label facing up. . Press the OPEN/CLOSE button to close the disc tray. ~ The HDD & DVD Recorder does not play discs automatically after being powered on initially. ~ When the HDD & DVD Recorder is powered on and a disc is in the tray, the unit will be activated and wait in stop status. ~ Press the PLAY( ) button to start playback. . Press the STOP( ) button to stop playback.
Using the playback related buttons Searching through a Chapter or Track SZXCV During play, press the SEARCH ( KL ) buttons on the remote control. )X2)X4)X8 HDD/DVD-VIDEO/ ● Playback ) X 16 ) X 32 ) X 128 DVD-RAM/±RW/±R DivX )X2)X4)X8 AUDIO CD (CD-DA) )X2)X4)X8 ~ You can scan the programme in reverse. ~ When you press and hold the SEARCH ( ) buttons, playback is done at the default speed of X 4. If you release the SEARCH ( ) buttons , playback is performed at a normal speed.
Playback Step Motion Play SZXCVKLD Press the SKIP( ) buttons on the remote control in the pause mode. ~ Each time the button is pressed, a new frame will appear. When the SKIP( ) button is pressed, the previous frame will be activated. When the SKIP( ) button is pressed, the next frame will be activated. ~ To return to normal speed playback, press the PLAY ( ) button. M ` Step motion operates only in the forward direction on DivX discs.
Selecting the Soundtracks & Audio Channels SZXCKLD Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV programmes. You can also operate this function by pressing the AUDIO button on the remote control. 1. Press the INFO button during playback. ● Playback . Press the $% buttons to select Audio. . Press the _ + buttons to select the desired sound tracks or audio channel. M ` Soundtracks or Audio channel may be different because they are disc-specific.
Playback Repeat A-B SZXCVKL 1. Press the INFO button during playback. Repeat . Press the $% buttons to select Repeat. A-B > . Press the _ + buttons to select Repeat A-B, then press the OK button. . Press the OK button at the point where you want the repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts.
Using Markers SXC (VR mode) Set marks at scenes you want to see again so that you can start playback from the marked position. Setting Markers 1. Press the MARKER button during playback. Marker 01 02 -- -- -- -- -- -- -- -- N : 2 . Press the + button to move to the next position. . Press the OK button again when the desired scene appears. ~ The number 02 is displayed and the scene is memorised.
Playback Playing back a bookmark 1. Press the MARKER button during playback. . Press the _ + buttons to select a bookmarked scene. . Press the OK or PLAY( ) button to start playing from the selected scene. Clearing a bookmark 1. Press the MARKER button during playback. . Press the _ + buttons to select a bookmarked scene. . Press the RED(A) button to delete the selected bookmark.
Audio CD(CD-DA) Screen Elements CD Music List TRACK01 1/10 No. ( @ + # ) 00:02:22 CDDA TRACK01 Title TRACK01 TRACK02 TRACK03 TRACK04 TRACK05 TRACK06 TRACK07 Edit Length 4:19 3:57 3:57 4:03 4:09 5:08 3:31 Displays the current file type and file name. Display available buttons. Play Mode [/] Previous/Next Page a Check ● Playback Q 002 003 004 005 006 007 Current track (song) : Displays the number of the track currently being played.
Playback CD Import 1. Press the RED(A) button during the Music List playback. CD . Press the ▲▼ buttons to select CD Import, then press the OK or + button. . Press the $% buttons to select file you want to copy, then press the MARKER button until a checkmark appears. ~ If you don't want to copy a certain one of the checked entries, simply select that entry and press MARKER button to deselect it until a checkmark disappears. . Press the +$% buttons to select the target media, then press the OK button.
Go To Playlist A 1. Press the RED(A) button during the Music List playback. . Press the ▲▼ buttons to select Go To Playlist, then press the OK or + button. Playlist � � No. Y E Title PLAYLIST PLAYLIST01 Length ( @ + # ) 00:02:22 Y PLAYLIST mMove sSelect a Check eExit Delete the Playlist A 1. Press the RED(A) button during the Music List playback. . Press the ▲▼ buttons to select Go To Playlist, then press the OK or + button. . Press the ▲▼ buttons to select the Playlist you want to delete.
Playback Go To Music List A 1. Press the BLUE(D) button during the Playlist playback. The Music List will be displayed. CD Playlist � 1/4 TRACK04 ( @ + # ) 00:02:22 CDDA TRACK04 � PLAYLIST01 No. Y R 003 004 005 Edit Title PLAYLIST01 TRACK04 TRACK02 TRACK06 TRACK01 Length 4:03 3:57 5:08 4:19 Play Mode [/] Previous/Next Page a Check eExit Using the Sort A When you need to change the Sort order of Music List, you can change it simply. 1.
Music/Photo Simultaneous Playback A You can listen to the music while watching the photo. 1. Press the BLUE(D) button to select Contents. . Press the ▲▼ buttons to select the Photo(With Music), then Press the OK or ► button. The photo List will be displayed. (See page 65~67.) CD Music List SONG 10.mp3 1/10 No. Y @ + # 00:02:22 M ` To operate this function, you have to select the disc containing both music files and photo file. 9 SONG 10.mp3 E ROOT Edit ROOT SONG 10.MP3 SONG 1.MP3 SONG 2.
Playback Rotate To setup, follow steps 1 to 4 on page 65. 5-1. Press the GREEN(B) button to select Rotate. . Press the ▲▼ buttons to select the rotate angle, then press the OK or + button. ~ Once you select a rotate angle, you can change it by pressing the RED(A) button. ~ You can go to Photo List by pressing YELLOW(C) button. 1/17 Off Rotate 90 Rotate 180 Rotate 270 Rotate ❖ To stop the Rotate Press the GREEN(B), STOP( Image 1.
Select Contents To setup, follow steps 1 to 3 on page 65. 1. Press the BLUE(D) button to select Contents. CD . Press the ▲▼ buttons to select the contents you want to move, then Press the OK or + button. Photo List 1/17 Image 1.jpg ROOT Image 1.jpg Image 10.jpg Image 13.jpg Image 14.jpg Image 15.jpg Sort [/] Previous/Next Page M Slideshow Contents a Check eExit ● Playback Edit Image 11.jpg Title DivX Music Image 16.
Playback DivX Subtitle Encoding 1. Press the YELLOW(C) button in the file list. . Press the ▲▼ buttons to select a supported DivX subtitle language by region, then press the OK button. CD DivX List Movie_01.avi 1/1 No. Title ROOT 001 Movie_01.avi Size Y 3 DivX E ROOT Edit 162.8 MB Western(Windows) Central(Windows) Greek(Windows) Cyrillic(Windows) Sort Subtitle Enc.
Recording This section shows various HDD&DVD Recording methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. ● Recording Recordable Discs This HDD & DVD Recorder can record on the following discs. HDD DVD-RAM DVD-RW DVD-R DVD+RW DVD+R ~ DVD-RAMs and DVD±RWs are rewritable. ~ DVD±Rs are non-rewritable.
Recording M ` Finalise - This closes the DVD-RW/±R so no additional recording can be done. ` Unfinalise - This allows additional recording on a DVD-RW disc originally recorded on the HDD & DVD Recorder. - A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalised. - A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised. - A DVD±R disc cannot be unfinalised.
Recording Mode Select one of four recording modes by pressing the REC MODE button repeatedly while the unit is in Stop mode for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function is selected only one mode in XP, SP, LP and EP modes and you can use this mode for timer recording.
Recording ~ DVD-SH897M Recording Mode HDD (320GB) DVD-RAM/±RW/±R XP (high quality mode) Approx. 68 hours Approx. 1 hour about 8.5 Mbps SP (standard quality mode) Approx. 135 hours Approx. 2 hours about 4.5 Mbps LP (long recording mode) Approx. 270 hours Approx. 4 hours about 2 Mbps EP (extended mode) FR (Flexible Recording) M Recording Times Approx. 405 hours Approx. 534 hours Approx. 68 hours ~ 534 hours Approx. 6 hours/ about 1.6 Mbps Approx. 8 hours/ about 1.2 Mbps Approx.
Unrecordable pictures Video with copy protection cannot be recorded on this HDD & DVD Recorder. When the HDD & DVD Recorder receives a copy- guard signal while recording, recording stops and the following message appears on the screen. TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never. If you want to record a copy-once type programme, use DVD-RW with CPRM in VR Mode, DVD-RAM and HDD.
Recording Recording the current TV programme you are watching 1. Press the PROG ( ) or number buttons to select the current programme you want to record. Record Mode SP(35:12) . Press the REC MODE button repeatedly, (or press the REC MODE button and then press the ▲▼ buttons) to select the recording speed(quality). SP LP EP XP . Press the REC button. Information concerning the channel is displayed on the screen, then recording begins. Icon(! REC) is displayed on the front panel.
M ` ` ` ` ` You can not change the recording mode while recording. Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc. Up to 999 titles can be registered on the HDD. HDD recording is available for up to 24 hours, and when recording for 24 hours, 3 titles will be recorded with each being 8 hours in length. ` Do not use DVD-R authoring discs with this unit.
Recording Making a One Touch Recording (OTR) SXCVKL You can set the HDD & DVD Recorder to record in 30-minute increments up to 8 hours by pressing the REC button. 1. Press the HDD or DVD button. If you select DVD, press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display. HDD ● Recording: PR 1 [SP] . Press the PROG ( ) or number buttons to select the programme to record. .
Stopping Playback / Recording 1. Press the STOP ( ) button. Playback screen disappears and the recording in progress screen appears. . Pressing the STOP ( ) button once more will stop the recording. N Using the TITLE LIST button . Press the OK or PLAY ( ) button. It plays back the title that you are currently recording from the beginning. Title List HDD RECORDING... 4/4 No. 001 002 003 004 3 MPEG2 Title JAN/01/2009 17:30 PR JAN/01/2009 21:00 PR JAN/01/2009 23:15 PR RECORDING...
Recording Using the Time Shift function 1. Press the TIME SHIFT button on the remote control. The Time Shift menu is displayed. . Press the ▲▼ button to select On, then press the OK button. . While watching the currently broadcasting programme, press the PAUSE ( ) button. The programme on TV is set in pause mode and the Time Shift Bar is displayed. . Press the PLAY ( ) button to resume watching the programme. Time Shift Screen Elements Informs you that the timeshift is currently working.
Making a Timer Recording SXCVKL 1. Check if the antenna cable is connected. 2. Check if the remaining time of the disc. 3. Check if the date and time are correct. Make sure the Clock (Setup-Clock Set) is set before you proceed with a timer recording. (See pages 35~36) 1. With the unit in Stop mode, press the TIMER button. . Press the $% button to select the Scheduled List, then press the OK or + button. HDD & DVD RECORDER . Press the OK button to select Add a list. . Set timer recording option.
Recording M ` DVB-T Timer recording is possible only on FR mode. ` On DVB-T recording, recording mode will be automatically determined depending on the quality of the video (or audio). ` If you select the number of scheduled list which has been set the series recording, 'series recording on' will be displayed above the button display. ~ PDC : PDC (Programme Delivery Control) function.
Editing the Scheduled List Follow these directions to edit the Scheduled List. N Using the TIMER button 1. With the unit in Stop mode, press the TIMER button. . Press the $% button to select the Scheduled List, then press the OK or + button. Timer Record HDD Library Scheduled List ► Guide Recorded List ► Channel Timer Record Disc Manager Setup m MOVE sSELECT rRETURN eEXIT . Press the OK button to confirm the edited setting. . Press the EXIT ( ) button after finishing the operation.
Recording Deleting a Scheduled List SXCVKL Follow these directions to delete an entry from the Scheduled List. N Using the TIMER button 1. With the unit in Stop mode, press the TIMER button. . Press the $% button to select the Scheduled List, then press the OK or + button. . Press the ▲▼ buttons to select the number of the Scheduled List you want to delete, and then press the GREEN(B) button. ~ You will be prompted with the delete confirm message such as “Do you want to delete?”. .
Information about Recorded List Informs whether the selected Recorded List performed a Timer Recording successfully. To setup, follow steps 1 to 2 on Page 82. 3-1. Press the ▲▼ buttons to select the number of the Recorded List, then press the OK button. - Check whether the timer Recording has set correctly or not. - Cancel a preset recording. HDD Recorded List No.
Editing This section introduces basic functions of editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Recording or editing might not be completed if an error, such as a sudden power failure occurs. Please be aware that material that has been damaged is unable to be restored to its original state. Basic Editing (Title List) Playing the Title SXCVKL Follow these instructions to play back a scene from the Title List. N Using the TITLE LIST button 1.
. Press the BLUE(D) button to select Save. The changed title name is displayed on the title item of the selected entry. Rename HDD Sports(A1) Back Space m MOVE Space sSELECT Clear rRETURN Save eEXIT SXCVKL Follow these instructions to lock an entry to protect it from accidental edition. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. .
Editing Deleting a Title SXCVKL Follow these instructions to delete an entry from the Title List. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. . Press the ▲▼ buttons to select an entry you want to delete in the Title List, then press the MARKER button until a checkmark appears. Repeat this step to select an additional title you want to delete.
. Press the ▲▼ buttons to select Split, then press the OK or + button. . Using the playback-related buttons (PLAY ( ), PAUSE ( ), SEARCH ( ), move to a point for splitting and press the OK button. If it is not the point where you want to split, press the RETURN button to cancel the selection. Using the playback-related buttons, move to a point to split and press the OK button. Split HDD JAN/01/2009 17:30 PR1 Title List No.
Editing . Press the _ + buttons to select Delete, then press the OK button. Partial Delete HDD JAN/01/2009 17:30 PR1 Title List No. 001 Start End Do you want to delete? (Deleted part will not be restored.) . Press the _ + buttons to select Yes, then press the OK button. The selected section has been deleted. . Press the _ + buttons to select Return, then press the OK button to finish the operation.
. Press the _ + buttons to skip one minute at a time and search the desired scene, then press the OK or PLAY ( ) button. M Time Navigation HDD 3 JAN/01/2009 17:30 PR1 1/3 ` Cursor does not move if the selected recorded title is shorter than 1 minute. ` The Navigation function may not work on a disc that has not been recorded by this device. 00:00 ► 17:30 < MOVE 18:30 sSELECT rRETURN eEXIT ` An edited title may not display the exact search time.
Editing Advanced Editing (Playlist) Creating a Playlist SXC (VR mode) Follow these instructions to create a new playlist entry from a recorded title. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. . Press the RED(A) button. The Edit menu is displayed. . Press the ▲▼ buttons to select New Playlist, then press the OK or + button. The Make Playlist screen is displayed. . Press the OK button at the start point.
Playing Entries in the Playlist SXC (VR mode) Follow these instructions to play the playlist entries. N Using the PLAY LIST button Playlist HDD JAN/02/2009 13:47 . Press the STOP ( ) button to stop playing. The screen returns to the Playlist screen. 1/3 No. Title 001 JAN/02/2009 13:47 002 JAN/02/2009 13:51 003 JAN/02/2009 14:08 . Press the ▲▼ buttons to select the playlist you want to play, then press the OK or PLAY ( ) button.
Editing Editing a Scene for the Playlist SXC (VR mode) Follow these instructions to edit scenes for a playlist. N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. . Press the ▲▼ buttons to select the title you want to edit from the Playlist, then press the RED(A) button. The Edit menu is displayed. . Press the ▲▼ buttons to select Edit Playlist, then press the OK or + button. The Edit Playlist screen is displayed.
Moving a Scene (Changing the Position of a Scene) To setup, follow steps 1 to 3 on page 92. 4-1. Press the ▲▼_ + buttons to select the scene you want to move (change the position), then press the GREEN(B) button. ~ A yellow selection window is displayed on the scene to be moved. 5. Press the ▲▼_ + buttons to select the position to which you want to move the selected scene, then select the OK button. Edit Playlist HDD JAN/02/2009 13:47 Scene No.
Editing Deleting a Playlist Entry from the Playlist N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. . Press the ▲▼ buttons to select an entry you want to delete in the Playlist, then press the MARKER button until a checkmark appears. Repeat this step to select an additional title you want to delete.
COPYING FROM HDD TO DVD OR VICE-VERSA About the Copy Screen Total size and number of selected titles for copying Title to be copied This shows available disc space Available : 4099MB Source : HDD To : DVD 001 JAN/01/2009 1 002 JAN/01/2009 1 003 JAN/01/2009 1 The location where the copied files are stored ; DVD Copy start button 3 MPEG2 0 SP � 36.
Editing . Press the RED(A) button, then press the $% button to select Copy. Press the OK button. Copy screen is displayed. . Press the $% buttons to select the title you want to copy, then press the MARKER button until a checkmark appears. Repeat this step to select an additional title you want to copy. ~ If you don’t want to copy a certain one of the checked entries, simply select that entry and press MARKER button to deselect it until a checkmark disappears. .
File Copy 1. Insert a JPEG disc, MP3 disc or DivX disc into the disc tray. . Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display. Check that the disc has enough available space for the recording. . Press the ▲▼ buttons to select Library, then press the OK or + button. . Press the RED(A) button, then press the $% button to select Copy. Press the OK button. Copy screen is displayed. .
Editing . Press the RED(A) button, then press the $% button to select Copy. Press the OK button. Copy screen is displayed. . Press the ▲▼ buttons to select the folder you want to copy, then press the MARKER button until a checkmark appears. ~ If you don’t want to copy a certain one of the checked folders, simply select that entry and press MARKER button to deselect it until a checkmark disappears. . Press the +$▼ or OK button to select the location where the copied files are stored.
Changing the name of Music/Photo/DivX file S You can rename a Music, Photo or DivX file copied to HDD. 1. Press the ▲▼ buttons to select the entry you want to rename, then press the RED(A) button. . Select the desired characters using the ▲▼_ + buttons, then press the OK button. ~ Back Space (RED(A) button) : Deletes and moves the cursor backwards by one position. ~ Space (GREEN(B) button) : Enters a blank and moves the cursor one forward (to the right).
Editing Disc Protection XCV Disc Protection allows you to protect your discs from being formatted or deleted due to unintended operations. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Disc Manager, then press the OK or + button. . Press the _ + buttons to select Protection, then press the OK button. . Press the _ + buttons to select On, then press the OK button. DVD-RAM(VR) Disc Manager Disc Name Used Space 00:17 Available Space 01:54 SP ( 3.
Delete All Title Lists/DivX Lists /Music Lists/Photo Lists S 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Disc Manager, then press the OK or + button. HDD Disc Manager Used Space 000:39 Available Space 065:19 XP ( 231.01 GB) ( 1.68 GB) . Press the _ + buttons to select Delete, then press the OK button. . Press the _ + buttons to select Yes, then press the OK button. All title lists, DivX lists, music lists or photo lists are deleted.
Editing DVD-RW ~ You will be prompted with the confirmation message “Choose the recording format for DVD-RW.” ~ If you select the desired format type, you will be prompted with the confirmation message “All data will be deleted. Do you want to continue?”. . Press the _ + buttons to select Yes, then press the OK button. The disc is formatted. DVD-RW(VR) Disc Manager Disc Name Used Space 00:17 Available Space 01:54 SP ( 3.85 GB) Disc Protection Info Not Protected Current Rec.
Unfinalising a Disc (V/VR mode) C 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Disc Manager, then press the OK or + button. . Press the _ + buttons to select Yes, then press the OK button. You will be prompted again with the message “Disc will be unfinalised. Do you want to continue?”. . Press the _ + buttons to select Yes, then press the OK button. The disc is unfinalised. Disc Manager Disc Name Current Rec.
Reference Troubleshooting If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service centre. PROBLEM EXPLANATION/SOLUTION The input is displayed for a while when the power is turned on. The HDD & DVD Recorder requires some time to initialise and the input will be displayed for approx. 10 seconds after it is turned on. Cannot record TV programmes. • Check whether the power cord is securely plugged into the power outlet.
PROBLEM EXPLANATION/SOLUTION • Are you watching a programme in slow or skip mode? If you are playing a programme at a speed other than normal speed, sound will not be heard. (Except for forward search (X 2) in disc.) • Check the connections and settings. (See pages 26~31, 42~43) • Check whether the disc is damaged. Clean the disc, if necessary. • Check whether the disc is inserted correctly with the label facing up. No audio output.
Appendix Specifications General Input Power requirements 220-240 V AC, 50 Hz Power consumption 28 Watts / 1 Watts (Power off ) Weight 3.6 Kg Dimensions 430 mm(W) x 300 mm(D) x 55 mm(H) Operating temp. +5 °C to +35 °C Other conditions Keep level when operating. Less than 75% operating humidity Video Composite Video : 1.0 V p-p at 75Ω load, sync negative Audio Max.
UNITED KINGDOM This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.
This product uses parts of the software from the Independent JPEG Group. This product uses some software programs which are distributed under the GPL/LGPL licence. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com. GPL software: Linux Kernel, Busybox, Binutilis LGPL software: Glibc The GNU General Public Licence (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this Licence, and its terms, do not apply to those sections when you distribute them as separate works.
Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
GNU Lesser General Public Licence (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this licence document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public Licence, version 2, hence the version number 2.1.
addressed as “you”. A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms.
of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this Licence would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
