DVD-SR270M DVD-SR275M DVD Recorder user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.
Getting Started Getting Started IMPORTANT NOTE Warning The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Handling Cautions • Before connecting other components to this DVD Recorder, be sure to turn them all off. Important Safety Instructions • Do not move the DVD Recorder while a disc is being played, or the disc may be scratched or broken, the DVD Recorder internal parts may be damaged. Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.
• If you move your DVD Recorder suddenly from a cold Getting Started Disc Handling place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. • Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this DVD Recorder may be damaged.
• The unit can handle a maximum of 499 files and finishes. • This product optimizes the DVD+R for each recording. • DVD-RAM/DVD±RW/DVD±R discs that contain MP3 Optimizing is carried out when you start recording after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing is carried out too many times. files can be played back. ◆ JPEG CD-RW/-R • Only JPEG files with the “.jpg”, “.
Getting Started ◆ DVD-RAM Disc Playback played with this product. • You cannot play a DVD-RAM in most DVD components ❋ For more information on DVD recording compatibility, consult your DVD-RAM/DVD±RW/ DVD±R manufacturer. due to compatibility issues. • Only DVD-RAM standard Version 2.0. discs can be played in this unit.
Getting Started System Setup Warning...................................................................................................2 On-Screen Menu Navigation.......................................................23 Precaution ..............................................................................................3 Important Safety Instructions........................................................3 Handling Cautions ......................................................................
Getting Started Changing the Subtitle Language ..............................................41 Using the digital text service.......................................................41 Guide .....................................................................................................42 Guide Timer Recording ..................................................................42 Playback Region code (DVD-Video only) ..................................................
• DVD-SR270M This unit allows you to record and playback high quality digital images on a DVD-RAM/DVD-RW/DVD-R disc. You can record and edit digital video on DVD-RAM/DVDRW/DVD-R discs. (DVD+RW/DVD+R discs can be played, but cannot be recorded.). • DVD-SR275M With the DVD-Recorder, you can create your own DVD Video titles on 4.7 GB DVD±RW/DVD±R or 8.5 GB DVD±R discs.
Getting Started Before reading the user’s manual How to use the DVD Recorder Make sure to check the following terms before reading the user manual. Icons that will be used in manual Icon Z X C V K L B G A D J M N H Term DVD RAM Please check available disc type before recording. Definition This involves a function available on DVD or DVD-RW(V)/-R(V)/+R discs that have been finalised. This involves a function available on DVD-RAM. This involves a function available on -RW DVD-RW.
Step 3 : Recording Step 4 : Playing To start playback, select the title you want to play from the title list. A DVD consists of sections called titles, and sub- sections called chapters. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically regardless of the disc type when it is set at the setup menu. To play your DVD on other DVD components, finalising may be necessary.
Getting Started Preparing the Remote Control Unpacking Install Batteries in the Remote Control • Open the battery cover on the back of the remote Accessories control. Check for the supplied accessories below. • Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly. • Replace the battery cover. If the remote does not operate properly : Video/Audio Cable RF Cable for TV • • • • Check the polarity +/– of the batteries (Dry-Cell) Check if the batteries are drained.
Controllable TV Codes BUTTON SALORA 74 SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09 SANYO 41, 42, 43, 44, 48 AIWA 82 SCHNEIDER 6 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 SELECO 74 BANG & OLUFSEN 57 SHARP 36, 37, 38, 39, 48 BLAUPUNKT 71 SIEMENS 71 BRANDT 73 SINGER 57 BRIONVEGA 57 SINUDYNE 57 CGE 52 SONY 35, 48 CONTINENTAL EDISON 75 TELEAVA 73 DAEWOO 19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 EMERSON 64 FERGUSON 73 FINLUX 06, 49, 57 FORMENTI 57 FUJITS
Getting Started Description Front Panel (DVD-SR270M) 1 2 8 5 4 11 6 3 1. STANDBY/ON BUTTON 7. RECORD BUTTON 2. VIDEO INPUT JACK (AV3 IN) 8. FRONT PANEL DISPLAY 3. AUDIO INPUT JACK (AV3 IN) 9. SEARCH/SKIP BUTTON 4. DVD DECK 10. STOP BUTTON 5. DVD OPEN/CLOSE BUTTON 11. PLAY/PAUSE BUTTON 6. INPUT BUTTON 7 9 10 9 Front Panel (DVD-SR275M) 1 2 3 9 6 5 12 7 4 1. STANDBY/ON BUTTON 7. INPUT BUTTON 2. VIDEO INPUT JACK (AV3 IN) 8. RECORD BUTTON 3.
1 4 5 2 3 4 5 2 3 6 7 6 7 Getting Started Rear Panel (DVD-SR270M) Rear Panel (DVD-SR275M) 8 1 1. RF IN/RF OUT JACK 6. COMPONENT VIDEO OUT JACKS 2. AV1 (TV) IN/OUT SCART 7. VIDEO/AUDIO LINE OUT JACKS 3. DIGITAL AUDIO OUT JACK (COAXIAL) 8. HDMI JACK (DVD-SR275M only) 4. AV2 (EXT) SCART 5. AUDIO L, R OUT JACKS M The Antenna connection does not pass the output signal of the DVD Recorder. To watch output signal of the DVD Recorder, you must connect audio/video or Scart cables.
Getting Started Front Panel Display 1 2 3 4 5 DVD CD 6 RW REC HDMI 1080iP720P 7 9 8 1. STOP, PAUSE and OPEN/CLOSE indicator 7. Lights to indicate the timer record mode 2. PLAYBACK, SKIP/SEARCH indicator 8. HDMI indicator : HDMI 480P k “HDMI”, HDMI 720P k “HDMI + 720P”, HDMI 1080i k “ HDMI + 1080i”, HDMI 1080P k “ HDMI + 1080P”. 3. In Disc Indicator : DVD Video, Audio CD, CD-R/RW, DVD-R/RW/RAM, DVD+R/RW 4. DVD VIEW indicator 5. CD indicator 6.
Tour of the Remote Control Your DVD Recorder remote control will work with Samsung televisions and compatible brands. Brings up the DVD Recorder’s setup menu. 20 21 13. OK/Direction Buttons (▲/▼/◄/► Buttons) 3 22 23 14. TITLE LIST/DISC MENU Button Press this to enter the Title List/Disc menu. 4 5 24 16. A, B, C, D button 6 7 8 15. AUDIO Button Use this to access various audio functions on a disc (DVD mode) . 25 9 26 27 10 28 11 12 29 13 Press this when you use DTV functions. 17.
Connecting & Setting Up Connecting & Setting Up Connecting DVD Recorder to the TV using the RF Cable Connecting the SCART Cable Case 1 : Connecting DVD Recorder to the TV using the SCART Cable M Make sure that both the television and the DVD Recorder are switched off before connecting the cables. 1. Remove the aerial or network input cable from the television. • Obtain better quality sound and pictures. • Simplify the setting up procedure of your DVD 2.
Case 2 : Connecting DVD Recorder to a Satellite Receiver or Other Equipment Connecting the Audio/Video Cable You can connect your DVD Recorder to a Satellite receiver or other DVD Recorder using the SCART cable if the appropriate outputs are available on the equipment chosen. You can connect your DVD Recorder to the television using the audio/video cable if the appropriate input is available on the television. 1.
What is “Progressive Scan”? • Take care to respect the colour coding of the up and down channels. Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality. • Press the input selector on your TV remote control until the Component signal from the DVD Recorder appears on your TV screen.
4. Press the input selector on your TV remote control until the DVI signal from the DVD Recorder appears on your TV screen. J Depending on the HDMI device (TV/HDMI If your TV has a HDMI/DVI input, connect HDMI/ DVI cable to a TV. You will enjoy the best quality images and sounds. Please check the logo (If your TV has an logo, then it supports Anynet+ function.) Why does Samsung use HDMI? Analogue TVs require an analogue video/audio signal.
Connecting & Setting Up AV Receiver Connections Connecting External Devices To take full advantage of the movie theatre experience that DVD offers, you may want to connect your DVD Recorder to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers. If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD Recorder’s built-in Dolby Digital Decoder. Use the Digital Audio Out connection below.
System Setup On-Screen Menu Navigation 12:00 Timer Title List Timer Timer - Standard Timer - VIDEO Plus+ Timer List Edit Disc Setting Setup >Move sOk rReturn eExit The on-screen menus allow you to enable or disable various functions on your DVD Recorder. Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus. 1. ▲▼ buttons Press these buttons on the remote control to move the selection bar ▲▼ to cycle through the menu options. 3.
6. Press the ▼ button to select OK, then press the OK button. Digital auto scan will be started. After digital auto scan is completed, analogue auto scan will be started. Auto Scanning Digital 610.000MHz, BW:8MHz, FFT:Auto DTV Radio 7. After auto channel scan is completed, auto clock setting will be started automatically after one minute. If you want to start auto clock setting immediately, press OK button.
Daylight Saving Time To setup, follow steps 1~3 in page 24. 12:00 Clock Set Title List Timer Edit Time Zone Daylight Saving Time : OffOff Auto Adjust : OffOn Present Time : Tue 1. 1.2008 12:00 Disc Setting 4. Press the ▲▼ buttons to select Daylight Saving Time, then press OK button. 5. Select the On or Off using the ▲▼ buttons, then press the OK button. Setup >Move sOk rReturn eExit Auto Adjust Turns on the Auto Adjust function when a channel in your local area broadcasts a time signal.
Tuner Preset This menu consist of 6 sub-menus (Digital Channel List, Digital Favourite Channel, Auto preset, Digital Manual Setup, Analogue Manual Setup, Analogue Channel List). Auto Preset 12:00 Tuner Preset Title List Auto Preset Digital Manual Setup Digital Channel List Digital Favorite Channel Analog Manual Setup Analog Channel List Timer Edit Disc Setting This function allows you to download of the channels automatically from the programmed load. 1. Press the MENU button. 2.
Digital Manual Setup 12:00 Tuner Preset Title List Auto Preset Digital Manual Setup Digital Channel List Digital Favorite Channel Analog Manual Setup Analog Channel List Timer Edit Disc Setting To setup, follow steps 1~3 on page 26. 4. Press the ▲▼ buttons to select Digital Manual Setup, then press OK button.
Digital Channel List This function is possible in DVB-T mode only. This function is used to edit the favourite channel list or remove the channel. DTV list 001 BBC ONE 002 NO Name CH 007 NO Name CH 030 CBBC Channel 040 BBC NEWS 24 051 BBCi 800 PARIS PREMIERE To setup, follow steps 1~3 on page 26. 4. Press the ▲▼ buttons to select Digital Channel List, then press OK button. Edit FAV Remove Page 5. To edit the current channel to the Digital Channel List, press the RED(A) button.
DVD Auto Chapter Timer Edit Disc Setting XCVKL 12:00 Features Title List DVD Auto Chapter : 5 Min Off Format DVD-RW : VR5 Min EZ Record : Off15 Min DVD Bilingual Rec. : Main DVB-T Auto Subtitle : On DivX Registration Code DVD-SR275M only Setup >Move sOk rReturn eExit Title Menu 1. Press the ▲▼ buttons to select DVD Auto Chapter, then press the OK button. Prog. 6 May. 18. 2007, 08:14:39 SLP sOk 2. Press the ▲▼ buttons to select Off, 5Min or 15Min, then press the OK button.
If the disc is new DVD-RW, It is initialised to V mode automatically. 4. Press the REC (•) button. 5. EZ Record function will automatically Finalise the disc under the following conditions. • When you press the OPEN/CLOSE button on your DVD Recorder after recording on at least 30% of the disc. The tray will open after the disc has been finalised. • The above feature is available only when a DVD-RW(V)/-R(V)/+R disc is inserted. Unformatted Disc. Formatting. Please wait.
If you play a DVD when the TV power is off, the TV will power On. If you turn the TV off, the DVD Recorder will power off automatically. (When the DVD recorder is recording, it can’t be powered off.) If you change the HDMI to other sources(Composite, Component, RF... etc) in TV while playing the DVD disc, the DVD Recorder will stop playing. But the DVD Recorder may keep the DVD disc playing depending on navigation that the DVD disc supports.
Setting up the Options Language 12:00 Language Title List Timer Edit Disc Setting OSD Disc Menu Audio Subtitle DVB-T Audio DVB-T Subtitle : : : : : : English English Original Auto English English 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK button. Setup >Move sOk rReturn If you set the language options, in advance, they will come up automatically every time you watch a movie. eExit 3.
The “Confirm the password” message will be displayed. Enter your password again. M Press the RETURN button to return to the previous menu. Press the EXIT ( ) button to exit the menu. If you forgot your password 1. Remove the disc. 2. Press and hold the PLAY ( ) button on the front panel for 5 seconds or more under no disc and DVD mode. Tray is open and password will revert to factory settings.
Setting up the Front Display 12:00 Options Title List Timer Language Parental Front Display Edit Disc Setting : Auto Auto Bright Dimmer Off Setup >Move sOk rReturn eExit This function allows you to adjusts the lighting of the front panel display. • Auto : Adjusts to low lighting when power is off. • Bright : Maintains bright lighting when power is off. • Dimmer : Maintains low lighting regardless of whether power is on or off. • Off : Turn off the lighting when power is off.
Resolution(HDMI) (DVD-SR275M only) 12:00 Video Title List Timer Edit DV Dubbing Disc Setting TV Type : 4:3 Letter Box Resolution(HDMI) : Auto Auto Video(HDMI) : YCbCr 1920 x 1080p 1920 x 1080i Picture Control : Standard 1280 x 720p AV 1 Output : Video Component Out : On 720 x 576p Progressive : On • Auto : It will be set to the possible maximum resolution supported by the TV.
Picture Control 12:00 Video Title List Timer Edit Disc Setting TV Type Picture Control AV 1 Output Component Out Progressive : 4:3Dynamic1 Letter Box : Standard Dynamic2 : Video Standard : OnCinema1 : OnCinema2 Personal Setup Selects the picture control for the video signals output from the AV output jacks. You can adjust the DVD video signal from the recorder to obtain the picture quality you want. Select the setting that best suits the programme you are watching.
Setting up the Audio Options 12:00 Setup Title List Timer Edit Disc Setting Tuner Preset Clock Set Video Audio Features Options 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK button. 3. Press the ▲▼ buttons to select Audio, then press the OK button. Setup >Move sOk This function allows you to setup the Audio options. rReturn eExit 4. Press the ▲▼ buttons to select the desired audio option, then press the OK button. 5.
Downmix (DVDs only) 12:00 Audio Title List Timer Edit Disc Setting Digital Out Downmix Audio DRC Scan Audio Surround AV Audio Input : On : Dolby Surround Dolby Surround : Standard Normal : On : Off : Stereo Switches the method for mixing down to two channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. • Dolby Surround : Select this setting to enjoy Multi-channel DVDs over Setup >Move two channels.
Surround 12:00 Audio Title List Timer Edit Disc Setting Digital Out Downmix Audio DRC Scan Audio Surround AV Audio Input Setup : On : Dolby Surround : Standard : On Off : Off Surround1 : Stereo Surround2 Turns on the surround function to create virtual rear speakers from a stereo TV or two separate front speakers. • Off : No surround effect • Surround 1 : Creates one set of virtual surround speakers. • Surround 2 : Creates two sets of virtual surround speakers.
DTV Functions Basic Functions Display Screen DVD-VIDEO INFO TF1 Time Audio Video Signal Info >MOVE : 15:05:00 : FRA : 4:3 : 94% >CHANGE After the television channels have been stored, you will see the following picture(banner) each time you switch channels. You can use this function when you see DVB-T. 1. Press the button once to display the channel and the channel name. 2. Select the channel by pressing the NUMBER buttons or PROG ( buttons to move to TV channel.
Setting the Favourite Channel You can immediately register the present channel to the Digital Favourite Channel List. Favorite DTV 1 1. Press the FAV LIST button while you are viewing a programme. 001 NO Name CH 002 BBC NEWS 24 Remove Page 2. To add the current channel to the Digital Favourite channels, press the YELLOW (C) button. (To display all favourite list, press the FAV LIST button. Each time FAV LIST button is pressed, favourite list will be toggled.
Guide DTV Guide 12:00 TUE 1 JAN 2008 The electronic programme guide gives you a channel list for the channels. 12:00 - 12.25 Blue Peter TUE 1 JAN 001 BBC ONE 002 BBC TWO 007 CBBC Channel 030 CBBC Channel 040 BBC NEWS 24 001 BBCi A 12:30 Blue Peter 13:00 --- Neighbours Basli Brush Tracy Beake --- 13:30 Look North BBC News Beg.
Playback This section introduces basic functions of playback and playback by disc type. Read the following information before playing a disc. Disc types that can be played Disc Types Recorded content Disc Shape Single sided(12cm) Region code (DVD-Video only) DVD-VIDEO Both the DVD Recorder and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.
Discs that cannot be played • DVD-Video with a region number other than “2” or “ALL” • 3.9 GB DVD-R Disc for Authoring. • A DVD-RW(V)/DVD-R(V)/+R disc which has been recorded and not finalised in a different manufacturer’s recorder. • DVD-ROM/PD/MV-Disc, etc • VCD/SVCD/CVD/CD-ROM/CDV/CD-G/CD-I • BD, HD-DVD M This DVD Recorder can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
Do not place foreign materials on or in the disc tray. Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case. Be especially careful that children’s fingers are not caught between the disc tray and the tray chassis when it closes. After turning power on, it will take a few seconds until the DVD Recorder operates.
Using the playback related buttons Searching through a Chapter or Track ZXCVBKLD During play, press the SEARCH ( ) buttons on the remote control. DVD-VIDEO/DVD-RAM/ ±RW/±R FF1 FF2 FF3 FR1 FR2 FR3 DivX FF1 FF2 FF3 FR1 FR2 FR3 AUDIO CD (CD-DA) FF1 FF2 FR1 FR2 • You can scan the programme in reverse. • To return to normal speed playback, press the PLAY( ) button. M You can hear sound during forward search (FF1) in DVD-VIDEO/ DVD-RAM/±RW/±R disc.
Using the ANYKEY button Title 2/6 Chapter 2/12 Time 00:00:52 Audio ENG Dolby D 2ch(1/1) The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter, track and time. You can also change the subtitle and audio settings and set some features including Angle. Remain 00:00:52 Subtitle 1/1 ENG Angle 1/1
Remain You can check the remaining time of the current title. 1. Press the ANYKEY button during playback. Title 2/6 Chapter 3/12 Time 00:00:52 Audio ENG Dolby D 2ch(1/1) Remain 00:00:52 Subtitle 1/1 ENG Angle 1/1 >Move sOk Selecting the Subtitle Language ZD Title 2/6 Chapter 3/12 Time 00:00:52 Audio ENG Dolby D 2ch(1/1) Remain 00:00:52 Subtitle 1/1 ENG Angle 1/1
Playing an Audio CD/MP3 Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback 4 3 5 5 7 8 2. OK button : Plays the selected track (song). 6 3. SKIP ( ) button : Moves to the next track. 4. SKIP ( ) button : Moves to the previous track. 1 1. ▲▼ : Selects a track (song). 5. Press the SEARCH ( Reverse scan : FR 2 ) buttons : Forward scan : FF, 6. PLAY ( ) button : Plays a track(song). 7. STOP ( 8. PAUSE ( ) button : Stops a track(song). ) button : Pauses Playback.
➁ This shows the operating state of a disc and a playback time corresponding to a portion that is currently played. ➂ Displays the track list (song list). ➃ Displays the current file. ➄ Displays available buttons. M If select the Music, MP3 files will only be displayed. If there are no MP3 files, empty folder will only be displayed. Playing back a Picture Disc G 12:00 Photo Picture 1 / 10 Slideshow 1. Insert a JPEG Disc into the disc tray. 2.
12:00 Music Q SONG01.MP3 Play 00:00:19 q9 SONG01.MP3 9 SONG02.MP3 Do you want to view 9 SONG03.MP3 the photo with MP3? 9 SONG04.MP3 9 SONG05.MP3 Yes No 9 SONG06.MP3 E/ 9 1/15 >Move sOk 3. Press the OK button. The message “Do you want to view the photo with MP3?” will be displayed. 4. Press the ◄► button to select Yes, then press the OK button. You can listen to the music while watching the photo.
Recording This section shows various DVD Recording & VCR methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. Compatibility between Samsung and Other Company’s Recorder • X : not possible Disc Types Rec. format DVD-RAM VR Mode Recordable Discs This DVD Recorder can record on the following discs.
Unfinalise - This allows additional recording on a DVD-RW disc originally recorded on the DVD Recorder. - A DVD-RW disc that has been recorded by DAO(Disc At Once) on a PC cannot be unfinalised. - A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised. - A DVD±R disc cannot be unfinalised. Recording Formats Since available functions differ depending on the disc type, select a disc that best fits your preferences.
Recording Mode Select one of eight recording modes by pressing the REC MODE button repeatedly while the unit is in Stop mode for the desired recording time and picture quality. In general, picture quality improves as the recording time decreases. In AUTO mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording.
Unrecordable pictures Pictures with copy protection cannot be recorded on this DVD Recorder. When the DVD Recorder receives a copy- guard signal while recording, recording stops and the following message appears on the screen. You cannot record copy protected movie. Concerning Copy Control Signals TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never.
Recording immediately DVD -RW VR SP XCVKL AV 1 DVD-SR275M only Before you start 1. Make sure antenna cable is connected. 2. Press the OPEN/CLOSE button and place a recordable disc on the disc tray. 3. Check the remaining time on the disc. DVD-RAM/DVD±RW/+R discs should be formatted or initialised in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording. 4. Press the OPEN/CLOSE button to close the disc tray.
To stop recording Press the STOP button to stop a recording in progress. • When using DVD-RAM/DVD±RW/±R discs, the message “Updating the information of disc. Please wait for a moment.” is displayed. M You can not change the recording mode and the programme while recording. Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, up to 49 titles onto a DVD+RW/+R disc.
Making a One Touch Recording (OTR) XCVKL DVD-SR275M only One-Touch Recording (OTR) allows you to add recording time in preset minute increments up to 8 hours by pressing the REC button repeatedly. 1. Press the PROG ( / ) buttons or number buttons to select the station to record. If you want to record through a connected external component, press the INPUT SEL. button to select an appropriate external input [ PR, AV1, AV2, AV3 or DV input(DVD-SR275M only) ]. 2. Press the REC button. 3.
4. Set timer recording option. • Fill the input items using the ▲▼◄► buttons and number buttons. ◄► : Moves to the previous/next item. ▲▼, 0~9 : Sets a value. Timer • Date : Timer Recording allows setting the recording time within one 12:00 Timer Title List Timer - Standard Timer - VIDEO Plus+ Timer List month period. Set the recording day.
• PDC : PDC (Programme Delivery Control) function. - If you set this function on, you can control the starting and ending time of recording by special signal included in the broadcasting signal. If a TV programme is shortened or starts earlier or later than scheduled, this function synchronizes the starting and ending time of recording with the actual broadcasting time automatically. - Set up the start-time exactly according to the published TV schedule. Otherwise the timer recording will not operate.
Editing the Timer List Timer XCVKL 12:00 Timer Title List Timer - Standard Timer - VIDEO Plus+ Timer List DVD-SR275M only Edit Disc Setting Follow these directions to edit the timer record list. Setup 1. With the unit in Stop mode, press the MENU button. >Move sOk rReturn eExit 12:00 Timer List No. Date Start End Prog. Mode PDC Edit 01 01/01 12:00 12:00 Prog.
Using the VIDEO Plus+ Feature Timer XCVKL 12:00 Timer Title List Timer - Standard Timer - VIDEO Plus+ Timer List DVD-SR275M only Edit Disc Setting Setup >Move sOk rReturn eExit 12:00 Timer - VIDEO Plus+ Title List Edit 3. Press the ▲▼ buttons to select Timer-VIDEO Plus+, then press the OK button. • A message is displayed to allow you to enter the VIDEO Plus+ code. Disc Setting Setup
Check Remaining Time Press INFO button on the remote control. The following information will be displayed. (Current deck status, recording Mode, remaining time, input channel, current time.) When you watch or record DVB-T broadcast, this function is not available. DVD-RW Stop 0:00:00 SP Rem 02:00 Prog. 1 Mon 01 Jan.
DV One Touch Dubbing 12:00 DV Dubbing Title List Timer DV Simple Dubbing DV One Touch Dubbing To setup, follow steps 1~3 on page 62 Edit DV Dubbing Disc Setting Setup s Ok s Ok r Return r Return e Exit e Exit 4. Press the ▲▼ buttons to select DV One Touch Dubbing, then press the OK button. DVD Recorder rewinds the tape in the digital video camera and then starts recording the tape contents from the beginning. When playback of the tape stops, One Touch Dubbing ends automatically.
Editing This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Playing the Title List XCVKL DVD-SR275M only Follow these instructions to play back a title from the Title List. 1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the ▲▼ buttons to select a title you want to play from Title List, and then press the PLAY button. 3. Press the STOP button to stop playing.
Basic Editing (Title List) Changing the Name of a Title (Title Name) Follow these instructions to rename a title list, i.e., to edit the title of a recorded programme. XCVKL 12:00 Title Name Sports(A1) A F K P U Z B C G H L M Q R V W D I N S X E J O T Y a f k p u z Backspace mMove DVD -RW h m r w l q v Space sOk d i n s x e j o 1 6 - 2 7 _ t y ~ % ! ^ Delete No.
Locking (Protecting) a Title Follow these instructions to lock a title to protect it from accidental deletion. DVD -RW Title List (Original) XCVKL 12:00 1/1 (VR mode)DVD-SR275M only Select the protection status for this title. T JAN/01/2008 01:00 AV1 On 01.Jan.2008 12:06 LSP >Move DVD -RW sOk rReturn Title List (Original) No. 3/4 T 1. Press the TITLE LIST button. The Title List screen is displayed.
With DVD±R, titles are only erased from the menu, however, the Title remains physically on the disc. Erasing a chapter (Chapter Erase) Follow these instructions to erase a chapter from the Title List. DVD Chapter Erase (Original) -RW Chapter No. 1 / 7 XCV 12:00 Title No.02 Check Erase 01 00:00:03 02 00:00:42 03 00:00:04 04 00:00:03 05 00:00:11 06 00:00:04 mMove sOk rReturn DVD Chapter Erase (Original) -RW Chapter No. 1 / 1 eExit 12:00 Title No.02 Check Erase Do you want to erase "No.
Erasing a section of a Title (A-B Erase) Follow these instructions to erase a section of a Title List entry. DVD -RW A-B Erase XCVK 12:00 Title No. 03 (VR mode) Start 1. Press the TITLE LIST button. The Title List screen is displayed. End Start 00:00:02 Erase ► T 00:00:02 Title No. 2 01.Jan.2008 14:15 >Move DVD -RW Finish 2. Press the ▲▼ buttons to select a title you want to edit from the Title List, then press the OK button. End 00:00:00 sOk rReturn A-B Erase eExit 3.
Dividing a title into two (Divide Title) Follow these instructions to divide a title into two. XCVK (VR mode) 1. Press the TITLE LIST button. The Title List screen is displayed. 2. Press the ▲▼ buttons to select a title you want to devide from the Title List, then press the OK button. DVD -RW Divide Title (Original) 12:00 Title No. 01 Point Divide Start 00:00:02 ► T 00:00:02 Title No. 1 01.Jan.2008 14:15 >Move DVD -RW End 00:00:00 sOk rReturn Divide Title (Original) eExit 12:00 Title No.
Advanced Editing (Playlist) Creating a Playlist Follow these instructions to create a new playlist title from a recorded title. DVD -RW Create Playlist XCV 12:00 (VR mode) Scene No. 01 Start End Start 00:00:01 Make Title No. 01 ► 00:00:01 Finish Playlist No. 01 01.Jan.2008 14:15 T >Move DVD -RW End 00:00:00 sOk rReturn Create Playlist eExit 12:00 Scene No. 01 Start End Start 00:00:01 Make Title No. 02 ■ Playlist No. 01 01.Jan.
Playing Titles in the Playlist Follow these instructions to play the playlist titles. DVD -RW Playlist No. 1/3 01 02 03 T 12:00 Length Edit Title JAN/01/2008 Play00:00:11 ► JAN/01/2008 Title00:00:09 Erase ► JAN/01/2008 Title00:01:36 Name ► JAN/01/2008 01:00 AV1 01.Jan.2008 12:06 LSP >Move sOk rReturn eExit XCV (VR mode) 1. Press the TITLE LIST button with the disc stopped, then press the PLAYLIST button. The Edit Playlist screen is displayed. 2.
• Backspace : Deletes the character before the cursor. • Space : Enters a blank and moves the cursor one forward (to the DVD -RW Playlist No. 3/4 T 01 02 03 04 Butterfly Title JAN/01/2008 JAN/01/2008 Butterfly JAN/01/2008 12:00 Length Edit 00:00:11 00:00:09 00:01:36 00:00:11 ► ► ► ► 01.Jan.2008 12:06 >Move sOk rReturn eExit right). • Delete : Deletes the character at the cursor position. • Clear : Deletes all the character inputs. • Finish : Registers the character inputs. 5.
Disc Setting Menu items may vary, depending on the existence of a recorded title. Editing the Disc Name 12:00 Disc Name Follow these instructions to give a name to a disc. XCVKL Disc_ A F K P U Z B C G H L M Q R V W D I N S X a E J O T Y f k p u z Backspace mMove b g l q v Space sOk c h m r w d i n s x e j o 1 6 - 2 7 _ t y ~ % ! ^ Delete Clear rReturn Timer Edit Disc Setting & 4 9 = # ( 5 0 .
Formatting a Disc Use these instructions to format a disc. The Disc Protection should be cleared. Timer Edit Disc Setting Disc Name : Disc Disc Protect : Not Protected Disc Format : VR Mode Disc Finalise : Unfinalised Select the recording format. Disc Information Erase All Titles Setup >Move XCK 12:00 Disc Setting Title List VR Mode sOk DVD-SR275M only 1. With the unit in Stop mode, press the MENU button. Video Mode rReturn eExit 2.
Finalising a Disc After you record titles onto a DVD-RW/±R disc with your DVD Recorder, it needs to be finalised before it can be played back on external devices. Timer Edit Disc Setting Disc Name : Disc Disc Protect : Not Protected Disc Format : VR Mode Do you want to finalise this disc? Disc Finalise : Unfinalised Disc Information Erase All Titles Finalise Setup >Move CVL 12:00 Disc Setting Title List sOk DVD-SR275M only 1. With the unit in Stop mode, press the MENU button.
M A DVD-RW can be finalised or unfinalised in V mode. Finalise Unfinalise Mark DVD-Video(RW) DVD-RW(V) Operation Same as DVD-Video Additional recording, protection and deletion are possible. A DVD-RW can be finalised or unfinalised in VR mode. Finalise Unfinalise Mark DVD-RW(VR:F) DVD-RW(VR mode) Operation Additional recording, deletion, editing, and protection are impossible. Additional recording, deletion, editing, and protection are possible.
Reference Troubleshooting (DVD) If your product malfunctions, go through the check points below before contacting a Samsung authorized service centre. Problem Explanation/Solution • Check whether the power cord is securely plugged into the power outlet. • Did you press the button of your DVD Recorder. The input is displayed for a while when the power turns on. The DVD Recorder requires some time to initialise after it is turned on. Cannot record TV programmes.
Troubleshooting (DVD) Problem Explanation/Solution icon appears on the screen. You cannot use the operation or function due to one of the following reasons: (1) Your DVD disc does not support the feature (for example, angles) (2) You’ve requested a title, chapter, or scan time that is out of the correct range. Play mode settings are different from the settings configured with the Setting menu. The disc does not support all the selected functions.
Specifications General Input Power requirements 220 - 240 VAC, 50Hz Power consumption 23 Watts/3Watts(Power off ) Weight 2.3Kg Dimensions 430(W) x 218(D) x 59(H) Operating temp. +5°C to +35°C Other conditions Keep level when operating. Less than 75% operating humidity Video Composite Video : 1.0 V p-p at 75Ω load, sync negative Audio Max.
UNITED KINGDOM This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.