User Manual

GB
11
GB
10
Deck Control Keys
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1 STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3 VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
4 DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
5 The TV VIEW Key
Press the TV-VIEW button on the remote control to toggle control
between the DVD and VCR.
➢ TV-V IEW function cannot work at the search,still and copy
mode.
➢ Before using the VCR operation of 10~25 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 26~46 pages, press
the TV VIEW button on the remote control to select and
watch DVD.
STANDBY/ON
REC
REW
1
4
TRK- A
SH
STANDBY/ON
ZOOM
1
78
9
0
+
3D SOUND S.FIT
DVD TV VIEW VCR
ANGLE
VOLUME ECHO
KARAOKE
STEP
F.ADV
CLEAR
0
+
-
3D
SOUND
S
.
FIT
DVD TV VIEW VCR
ANGLE
VOLUME ECHO
KARAOKE
F.ADV
STOP SELECT
F. F
OPEN/CLOSE
PLAY
2
3
4
5
Connecting the Audio Output Cable
You can connect your DVD-VCR to a Hi-Fi system.
Example
: You wish to take advantage of the quality of your Hi-Fi
stereo system when watching a programme or recording
via your DVD-VCR.
☛ ◆ Make sure that both the television and the DVD-VCR
are switched off
before connecting the cables.
1 Plug the audio output cable into the audio connectors on the rear
of your DVD-VCR.
➢ Respect the colour coding of the left and right channels.
2 Plug the other end of the audio cable into the appropriate input
connectors on your Hi-Fi stereo system.
AUDIO
AUDIO OUT COMPONENT
VIDEO
R
R
Y
L
L
LINE IN LINE OUT
DVD & VCR
D
1
1
Connecting DVD-VCR to the TV using the RCA Cable
OPTICAL
AUDIO
AUDIO OUT COMPONENT VIDEO OUT
VIDEO
R
R
YPr
Pb
L
L
DIGITAL
AUDIO OUT
LINE IN LINE OUT
DVD & VCR
DVD Only
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛ ◆ Make sure that both the television and the DVD-VCR are switched off before connecting the
cables.
1 Connect one end of the RCA cable to the LINE OUT on the rear of the DVD-VCR.
2 Plug the other end into the appropriate connector on the television.
RCA Cable
1
TV