User Manual

26 27
GB GB
Auto Power Off
The Auto Power Off feature automatically turns off your
DVD-VCR if no signal is received and you do not press any
button for the selected time.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding  or ❷ buttons, until the Auto
Power Off option is selected.
3 Press the
OK or
❿ buttons, until you select the time of Auto
Power Off interval.
Off 1Hour 2Hour 3Hour
4 On completion, press RETURN twice to exit the menu.
Language : English
User Set
Screen Messages : On
Install
Auto Power Off : Off
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Off
1Hour
2Hour
3Hour
To prevent delays or over-runs the VCR has a function called
G-CODE EXTEND allowing you to extend the recording time by
up to 60 minutes.
1 After pressing the MENU, press the OK or ❿ .
2 Press the corresponding  , ❷ buttons to select the User Set
option.
3 Press the OK or ❿ buttons to select this option.
Result
:The User Set menu is displayed.
4 Press the corresponding  or ❷ buttons, until the
G-Code Extend option is selected.
5 Press the OK or ❿ buttons to set the G-Code Extend time by
increments of 10 minutes.
6 To turn off, press OK or ❿ buttons repeatedly until Off shows.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Extend
VCR
Intelligent Picture Control
Intelligent Picture Control ( Remote Control )
VCR
VCR
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
Result
: The Setup menu is displayed.
2 Press the OK or ❿ .
Result: The Setup menu is displayed.
3 Press the corresponding  , ❷ buttons to select the
User Set option.
4 Press the OK or ❿ buttons to select this option.
Result
: The User Set menu is displayed.
5 Press the corresponding  or ❷ buttons, until the IPC option
is selected.
6 Press the OK or ❿ buttons to select the IPC (intelligent picture
control) option.
➢ When intelligent picture control mode is ON, the
sharpness of the image is adjusted automatically.
7 To adjust the sharpness manually, press the ❷
button to turn
the IPC mode
OFF
.
8 Press the ➛ or ❿ buttons until the picture is displayed according
to your preferences.
➢ If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9 On completion, press the RETURN button again.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
1 During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2 Press the ❷ button to turn the IPC (Intelligent Picture Control)
option
ON and OFF.
➢ When Intelligent Picture Control mode is ON, the
sharpness of the image is adjusted automatically.
3 To adjust the sharpness manually, select Intelligent Picture
Control mode
OFF.
◆ The horizontal picture adjusting appears.
4 Press the ➛ or ❿ buttons until the picture is displayed according
to your preferences.
➢ If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
5 On completion, press the IPC button again.
OK
1
Colour System : Auto
IPC : On
G-Code Extend : Off
User Set
Colour System : Auto
NICAM : On
IPC : On
G-Code Extend : Off
User Set
Australia Model
Newzealand Model
On
Off
On
Off
Colour System : Auto
IPC : On
G-Code Extend : Off
User Set
Colour System : Auto
NICAM : On
IPC : On
G-Code Extend : Off
User Set
Australia Model
Newzealand Model
Off
10
20
30
40
50
60
Off
10
20
30
40
50
60
VCR
00282A DVD-V530/XSA-GB2 9/1/03 11:43 AM Page 26