User Manual

58 59
GB GB
Selecting the Audio Language
You can select a desired language quickly and easily with the
AUDIO button.
1 Press the AUDIO button.
2 Use the ➛ , ❿ buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
3 Use the ➛ , ❿ buttons to select Stereo, ➛ or ❿ (On VCD/CD)
➢ • This function depends on what languages are encoded on the disc
and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
•
How to have the same audio language come up whenever you play a
DVD ;
Refer to “Setting Up the Language Features” on page 48.
DVD
DVD
VCD/ CD
Using the AUDIO button
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or
all of the disc.
1 Press the REPEAT button on the remote.
Repeat screen appears.
2 Select Chapter, Title or A-B using the ➛ , ❿ buttons.
•
Press the REPEAT button. Select A-B on screen with the
➛ , ❿
buttons.
•
Press OK at the point where you want the repeat play to start
(A). The B is automatically highlighted.
•
Press OK at the point where you want the repeat play to stop
(B).
•
To terminate the function, press the 'CLEAR' button.
•
A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
3 Press OK.
4 To return to normal play, press REPEAT again, then press the ➛ ,
❿ buttons to select Off and press OK.
• It is available to press CLEAR button on the remote controller in
order to stop REPEAT play.
➢ • DVD repeats play by chapter or title, CD and VCD repeat play by disc or
track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
DVD
OfOff
Chapter Title A - B
Off
Track Disc A - B
DVD
VCD / CD
OK
1
When playing a DVD
00282A DVD-V530/XSA-GB 4 9/18/03 5:40 PM Page 58