User Manual

Setting the DVD-VCR Output Channel
22 23
GB GB
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding  , ❷ buttons to select the Install
option.
3 Press the OK or ❿ buttons to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding  or ❷ buttons, until the Manual
Setup option is selected.
5 Press the OK or ❿ button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding  or ❷ buttons, until the required
preset TV programme is selected.
Result
: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8 Press the  or ❷ buttons to select required position.
And then press OK again to swap the position.
9 On completion, press the RETURN button four times to exit the
menu.
VCR
Selecting the Colour Mode
VCR
Changing the Preset Station Table
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 After pressing the MENU, press the OK or ❿ .
Result
: The Setup menu is displayed.
2 Press the corresponding  , ❷ buttons to select the Install
option.
3 Press the OK or ❿ to select this option.
Result
: The Install menu is displayed.
4 Press the  or ❷ buttons, until the VCR Output CH option
is selected.
5 Select the required output channel (CH28~CH69) by pressing
the OK or
❿ buttons.
CH28 . . CH38 . . CH69
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
PR CH NAME
1 01
2
3
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
PR CH NAME
1
2
3 01
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Auto Setup
Manual Setup
VCR Output CH : CH 38
Install
CH:28
:
CH:38
:
CH:69
VCR
Before recording or playing back a cassette, you can select the
required system standard.
➢ ◆ When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding  , ❷ buttons to select the
User Set option.
3 Press the OK or ❿ to select this option.
Result
: The User Set menu is displayed.
4 Press the corresponding  or ❷ buttons, until the Colour
System option is selected.
5 Press the OK or ❿ button to select Auto ➝ PAL ➝ MESECAM
➝ B/W.
B/W Black and White
6 On completion, press RETURN three time to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Colour System : Auto
IPC : On
G-Code Extend : Off
User Set
Auto
PAL
MESECAM
B/W
00316A DVD-V530A/XSA-GB2 10/14/03 4:40 PM Page 22