User manual

GB
Changing the Preset Station Table
21
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1 Press the SETUP button on the remote control.
2 Press the corresponding , or , buttons to select the
In s t a l l option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the MANUAL SET
U P option is selected.
5 Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the cursor is placed
on the required preset TV programme.
Result: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station (PR3
instead of PR1 for example):
◆ Press ENTER
◆ Press the
or buttons until the cursor is placed on the
programme to which the station is to be moved
◆ Press ENTER again
8 You can modify this station by repeating the same procedure from
Step 6 onwards.
9 On completion, press the RETUTN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME
1 0 0 3
2
3
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
TV STATION TABLE
PR CH NAME
1
2
3 0 0 3
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Clearing a Preset Station
GB
20
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 Press the SETUP button on the remote control.
2 Press the corresponding , or , buttons to select the
Install option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A I O N menu is displayed.
4 Press the corresponding or buttons, until the MANUAL SET
U P option is selected.
5 Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the required preset
TV station is selected. (P R)
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button three times to exit the
menu.
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
TV STATION TABLE
PR CH NAME
1 0 0 3
2
3
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
VCRVCR
MAIN MENU
INSTALLATION
RETURN ENTER
MAIN MENU
INSTALLATION
RETURN ENTER
00078A DVD-V72K/XSA-GB2 6/25/02 11:43 AM Page 20