User manual

GB
23
Intelligent Picture Control
Auto Power Off
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
O p t i o n option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the cursor is
placed on the I P C option.
5 Press the or button to select the IPC (intelligent picture
control) option.
➢ When intelligent picture control mode is O N, the sharpness
of the image is adjusted automatically.
6 To adjust the sharpness manually, press the
button to turn the
IPC mode
O F F
.
7 Press the or buttons until the picture is displayed according to
your preferences.
➢ If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8 On completion, press the RETURN button again.
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
O p t i o n option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding o r buttons, until the cursor is
placed on the AUTO POWER OFF option.
5 Press the button, until you select the time of Auto Power off
interval.
OFF 2HOUR 3HOUR
6 On completion, press RETURNtwice to exit the menu.
USER SET
COLOUR SYSTEM : A U T O
IPC : O N
AUTO POWER OFF : O F F
G-CODE EXTEND : O F F
RETURN
ON
OFF
USER SET
COLOUR SYSTEM : A U T O
IPC : O N
AUTO POWER OFF : O F F
G-CODE EXTEND : O F F
RETURN
OFF
2 H O U R
3 H O U R
VCR
VCR
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢ ◆ When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆ When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
O p t i o n option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
on the COLOUR SYSTEM option.
5 Press the button to select AUTO ➝ P A L ➝ M E S E C A M ➝ B / W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6 On completion, press RETURN twice to exit the menu.
GB
Setting the DVD-VCR Output Channel
22
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
I n s t a l l option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the or buttons, until the cursor is placed on the V C R
OUTPUT CH option.
5 Select the required output channel (CH28~CH69) by pressing the
or buttons.
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
CH28
CH38
CH69
VCR
Selecting the Colour Mode
VCR
MAIN MENU
USER SET
RETURN ENTER
USER SET
COLOUR SYSTEM : A U T O
IPC : O N
AUTO POWER OFF : O F F
G-CODE EXTEND : O F F
RETURN
AUTO
PAL
M E S E C A M
B/W
MAIN MENU
INSTALLATION
RETURN ENTER
MAIN MENU
USER SET
RETURN ENTER
MAIN MENU
USER SET
RETURN ENTER
00078A DVD-V72K/XSA-GB2 6/25/02 11:43 AM Page 22