User manual

GB
27
GB
26
Protecting a Recorded Cassette
Recording a Programme Immediately
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you
cannot record on the tape.
1 If you wish to protect a cassette, break off the tab using a small
screwdriver.
2 To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
7
6
4
4
1
5
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 18 and 19.
1 Switch on the television.
2 To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3 Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4 Select:
The station to be recorded using the PROG( or ) buttons
Result: The station number is displayed and the programme
can be seen on the television.
5 Select the recording speed by pressing the SPEED button as
many times as required (see page 26).
6 Hold REC (
●
) down for a while to start recording.
Result: The record indicator appears on the television and DVD-
VCR display. An index is recorded on the tape (see
page 36).
7 To stop recording, press
■
once.
➢ ◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
VCR
VCR
Displaying/Hiding On-Screen Information
Selecting the Recording Speed
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and
Timer functions, which cannot be hidden).
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
V C R option.
3 Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
on the O S D option.
5 To... Press or , until...
Display on-screen information O N is displayed.
Hide on-screen information O F F is displayed.
6 On completion, press RETURN twice to exit the menu.
T ype Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
VCR FUNCTION SETUP
Tape Select E 3 0 0
Repeat Play O f f
OSD
O n
RETURN
On
Off
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode S P is displayed.
In long play mode L P is displayed.
VCR
VCR
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
00078A DVD-V72K/XSA-GB2 6/25/02 11:43 AM Page 26