User manual

GB
Plug & Auto Set up
13
GB
12
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: A message appears.
3 Press ENTER to start the auto scanning.
◆ The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
4 On completion, press RETURN twice to exit the menu.
➢
◆ Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no
tape inserted.
2
Connecting Other Equipment to Your DVD-VCR
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢ The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
Camcorder
VCR
Sound system
TV
AUTO SET UP
PLEASE WAIT
6 0
%
I ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ - - - - - - - I
RETURN
RETURN
CLOCK SET
12:00 1/JAN/2002
TUE
00078A DVD-V72K/XSA-GB1 6/25/02 11:42 AM Page 12