User Manual

24 - English
System Setup
Plug & Auto Setup
The DVD Recorder-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The process takes
a few minutes. The DVD Recorder-VCR will then be
ready for use.
Connect the RF cable as indicated on page 16.
• Connecting Your DVD Recorder-VCR to the TV
using the RF Cable.
1
The Language Set menu is displayed.
• Using the ❷ buttons, move the selection bar
to select the desired language then press OK
button.
3
Plug the DVD Recorder-VCR into the mains.
• “Auto” in the front panel display flickers.
2
Language Set English
Français
Deutsch
Español
Italiano
Nederlands
Start the auto setup.
4
Start the auto scanning.
5
Check the date and time.
Refer to “Setting the Date and Time” menu, when
you want to change the date and time.
6