User Manual
40 - English
System Setup
To adjust the sharpness manually, press the ❷
button to turn the IPC mode OFF.
6
Press the ➛❿buttons until the picture is dis-
played according to your preferences.
• If you do not press a button within ten seconds,
the IPC menu disappears automatically.
7
On completion, press RETURN button to exit the
menu.
8
Select “IPC”
Using the ❷buttons, move the selection bar
to “IPC” then press
❿ or OK button to select the
IPC option.
•
When intelligent picture control mode is ON, the
sharpness of the image is adjusted automatically.
5
Off
Off
On
P
ro
g
ra
m
m
e
Select “VCR”
Move the selection bar to “VCR”, then press ❿
or OK button.
4
VCR
Front Display
: Automatic
: On
: RGB
NICAM
System
AV1 Output
P
ro
g
ram
m
e
Intelligent Picture
Control (IPC)
The intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically, accord-
ing to your own preferences.
Open “MENU”
With the VCR in play mode.
Press the MENU button.
1
Select “Setup”
Using the ❷buttons, move the selection bar
to “Setup” then press
❿ or OK button to select.
2
Select “System”
Using the ❷buttons, move the selection bar
to “System” then press
❿ or OK button to select.
3
P
ro
g
ram
m
e
You also can directly select this function using
IPC button on the remote control.
Note