User Manual

English - 21
Method 3 : Connecting a
Camcorder to the DV IN jack
If your camcorder has a DV output jack, connect it to the
DV input jack of your DVD Recorder-VCR.
•
If your camcorder has a DV output jack, see page 75
for more information.
LINE IN 2
LINE IN 2
Dispose of batteries according to local environmental reg-
ulations. Do not put them in the household trash.
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
•
Replace the battery cover.
If remote does not operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Step 6 : Preparing the
Remote Control
Connections