User Manual

40 - English
System Setup
P
ro
g
ra
m
m
e
Select “Tape Length”
Press the ❿ button to select the Tape Length.
This information is usually printed on the tape
box. The menu cycles through: E180, E240,
E280 or E300.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the INFO. button.
5
Select “VCR”
Using the ❷ buttons, move the selection bar
to “VCR”, then press
❿ or OK to select.
4
NICAM
AV 1 Output : RGB
: On
P
ro
g
ram
m
e
P
ro
g
ram
m
e
Select “Auto Repeat”
Move the selection bar to “ Auto Repeat”. It sets
the VCR to play a tape repeatedly [unless a tape
control is activated (Stop, Fast Forward or
Rewind)].
7
P
rog
ra
m
m
e
Select “Auto Play”
Move the selection bar to “Auto Play,” then press
❿ button to select from the following options:
• On - The VCR will automatically begin playing a
video tape when it is inserted, as long as
the safety tab of the cassette has been
removed.
• Off - Auto play is disabled.
6