User Manual

English - 69
Recording
 The numbers next to each TV programme list-
ing are G-Code numbers, which allow you to
programme your DVD Recorder-VCR instant-
ly with the remote control. Tap in the G-Code
for the programme you wish to record.
 ™ G-Code is a trademark of Gemstar
Development Corporation. The G-Code
system is manufactured under licence from
Gemstar Development Corporation.
Note
If the programme and times are correct, press
the OK button.
4
Press the STANDBY/ON button to activate the
timer.
5
Refer to page 73~74 if you wish to:
• Check that your DVD Recorder-VCR has been
programmed correctly
• Cancel a preset recording
6
Press the OK button.
• The information concerning the programme is
displayed.
• When using the G-Code function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
❷ buttons.
3
Refer to the following page if:
• The programme number or times flash
• You wish to modify the programme
06
05
04
03
02
01
No
To
PR
Start
End
Speed
V/P
Edit
No.01
To
PR
Day
Start
End
Speed
: :
01
SP
DVD
TUE 13
10 2008 20
DVD-RAM(VR)
Scheduled Record List
DVD-RAM(VR)
Scheduled Record List
TUE 13 08:20 10:20