Manual
Wa.tchingtheImag.es
BeingRec°rded(TimeSlzp)
ExternalDevice
This function allows you to watch the recently recorded 10-
second images on the PiP screen while a recording is in
progress.
1
Press the TIME SLIP button on tile remote control.
• The recently recorded 10-second images are
played back on the PIP scn'en.
• This function starts to operate i0 seconds from
tile time you press the REC button.
• Oil the TIME SLIPscn'en, you can playback,
scan, or perform other operations for tile recorded
program using the playback related buttons.
Press the _ button to scan the recording in the
reverse onler, from the end to the start.
Press the I=,,l_buttonto scan to tile recently
recorded 10- second images.
Plea _,the STOP bntton once to clear tile TIME SLIP
f.nction.
• To stop a recording while a TIME SLIP function is
in progress, prea _,the STOP hntton twice.
Follow these directions to record onto a disc or a tape
from External Devices.
Connect the Lille out iack of ?'our External
Devices to the Lille IN iack on tile front or
rear of yonr DVD Recorder-VCR nsing
Audio/Video Cahle.
2
Power on your DVD Recorder-VCR and
switch to Line In mode by pressing the
INPUT SEL on the remote.
The front panel display changes on tile
following sequence
D Channel Nnmher + L1 + L2+ DV.l
\\hen yonr DVD Recorder-VCR is in the
stop state, set the operation mode of your
External Devices to play mode.
Press tile REC hntton on ?,our DVDRecorder-VCR whml the image from which
you want to start recording is displayed.
Press the STOP button on yonr DVDRecorder-VCR when the recording is finished. ;;
i¸¸) _{>!
using Audio/Video cahle.
iii ?i
English - 65